|
| 1 | Removing existing water proofing treatment by brushing with wire brush, taking down cement concrete tile, existing plaster/cement concrete/lime coba etc in any thickness, cleaning of all foreign material such as fungus, moss, dust etc and remove from the site of all waste materials, roughing surface of corner to roof by wire brush and all the open cracks/honeycomb should repair properly with site made polymer mortar (cement: sand: 1:4) admixed with HS Latex Plus @10% by weight of cement. complete all as specified and directed. |
| 2 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately |
| 3 | Supply only integral water proofing compound complete all as specified and as directed. |
| 4 | M&L applying water proofing treatment with the following (a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane including Aluminium paint on top surface |
| 5 | Material and labour 75 mm thick PCC 1:3:6 type C2 using 40 mm graded aggregate as in plinth protection finished smooth and even w/o using extra cement and making good complete all as specified and as directed. |
| 6 | Demolition of cement concrete(un Reinforced) of any description in any position not otherwise specifically provided for etc. complete all as specified and directed. |
| 7 | Taking down chowkhats or frames with shutters ( without taking off shutters from froms exe 1.5 sqm and n.exe 4 sqm complete all as specified and as directed. |
| 8 | Taking down chowkhats or frames with shutters ( without taking off shutters from froms n exe 1.5sqm each complete all as specified and as directed. |
| 9 | Taking down Shutters of any description n exc 1 sq. m each complete all as specified and as directed. |
| 10 | Cutting holes in brick walls built in cement mortar for inserting hold fasts and making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. |
| 11 | M&L Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required:hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and as directed. |
| 12 | S&F 18 mm thick Rajshri Celuka ply of one side prelaminated and other side plain white colourto make kitchen cabinet/ drawer shutters fixed with screws to timber frame work complete as per specifications and as directed by the engineer - in - charge. |
| 13 | S&F Mortice lock alumunium body, night latch type of size 100mm of 4 levers etc compete all as specified and as directed |
| 14 | S&F 19 mm Cover fillet of external teak wood lipping 6mm thick fixed with nail all as specified and directed. |
| 15 | S&F Hasp & staple safety type aluminium anodized with mild steel hing pin incl bolt to hing plate and fixed with screws 100mm size etc complete all as specified and directed. |
| 16 | S & F 40 mm dia.,cup board knobs fixed with nut, screw and washer of brass, polished complete all as specified and as directed. |
| 17 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 18 | S&F factory made single extruded WPC (Wood Polymer Composite) chowkhat for solid door & other Frames of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant etc.complete as per direction of Engineer-in-Charge |
| 19 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moistureproof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 20 | &F 30 mm thick FACTORY MADE WIRE MESH SOLID WPC both side solid decorativeDOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company,including SS mosquito Mesh and XTN aluminium Mesh with aluminum deco grill for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings. complete all as specified and directed. (Note: Cost of stainless steel butt hinges and necessary S.S screws will be included in qouted rate. ) |
| 21 | S&F, butt hinges medium weight cold rolled, stainless steel and fixed 100 mm size etc complete all as specified and as directed. |
| 22 | S&F, aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed |
| 23 | S&F, aluminum anodized barrel tower bolts of extruded section 150 mm long etc complete all as specified and as directed |
| 24 | S&F, aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) 300mm long etc complete all as specified and as directed |
| 25 | Supply and fixing factory made uPVC white colour Three track and three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) including outer frame/track upto 1.50m height made of including outer size frame 116 x 45 mm & sash 46 x 62 mm both having wallthickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.comprising of uPVC multi chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 26 | M&L foraluminium powder coated glazed ventilator shutter with chowkhat, side hung type without sash bars, aluminium sectionsweighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) completeallasspecified including necessary joining cleats, glazing clips, rubber packing, powder coated aluminium snap beading, screwsall fittings, 5mm thick tinted ,selected quality and glass etc completeall as specified and as directed.Note : (i) The minimum thickness of powder coating shall be 50 Micron .(ii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . |
| 27 | M&L, framed work as grills, gratings, etc with ends of bars shouldered and/ or riveted into spikes; or forged into spikes, framed guard bars; barred iron doors and similar work confirming to Fe 290. Gd-E-165 etc complete all as specified and as directed |
| 28 | S&F5 mm thick, figured glass, ordinary quality and glazing withoil putty in square in nexc 0.5 sq.m in each pane etc complete all as specified and as directed. |
| 29 | S&F galvanized mild steel wire cloth 0.63 mm nominal dia of wire and avg width of apertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 30 | S & FFactory made solidPVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet used reinforced with MS square tube instead of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 31 | S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 32 | S&F Butt hinges, extruded aluminum alloy with galvanized MS sheet hinges pin anodized of100mm size type B-21 complete all as specified and as directed. |
| 33 | S&Fin repair aluminum adjustable automatic spring door closer (silver colour) with allen key and screwsweight minium 200 gm etc complete and as directed. |
| 34 | Taking down plaster on brick or stone wall, ceiling etc incl racking out joints hacking for keys scrubbing down with water etc complete all as specified and directed. |
| 35 | M & L 15 mm thick rendering on other than fair faces of brick work or concrete surface in cm 1:6 to be finished smooth and even with out suing extra cement complete all as specified and as directed. |
| 36 | M&L for external rendering 15 mm thick in CM 1:4 mixed with [email protected]/ bag by weight of cement on brick work or concrete surfaces of wall finished even and fair complete all as specified .Note-WPC shall be measured and paid seperately. |
| 37 | M & L for complete removal of existing treatment from surface ofwall all as specified and as directed by the Engineer-in-Charge |
| 38 | M & L for applying water proof 3 mm putty on wall in 3 layer (each layer should be 1 mm)all as specified and as directed by the Engineer-in-Charge |
| 39 | M&L for preparation of surfaces of walls and applying two coats of interior emulsion acyrlic paint over a coat ofparimer, complete all as specified and directed. |
| 40 | Material & Labour for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives @ 1.43 litre/ 10 sqm and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces.complete all as specified and directed. |
| 41 | M & L for preparation of oldceiling surfaces and applyingtwo coats of white wash complete all as specified and directed. |
| 42 | S&F in repair Vitreous china squatting pan, \"orissa\" pattern, size 580 x 440 mm white, with integral footrest (excluding flushing cistern and flush pipe) including provision of concrete beddig and joint to flush pipe to squatt pattern closet including all joints and making good to the floor and taking down old one complete all as specified and as directed. |
| 43 | S&F in repair 10 Ltrs capacity PVC flushing cistern valveles syphonic action type low level, white, with inlet ball valve, float & handle incl brackets & flush pipe complete all as specified and directed. |
| 44 | S& F in repair Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete as specified. |
| 45 | S&F in repair stainless steel sink with drainage board made of 1.00 mm thick steel sheet for kitchen or laboratory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed. |
| 46 | S & F in repair Vitreous China Ware Wash hand basin white oval type, size 550 x 400 mm sizeincluding cutting in slab and pinning ends of brackets or erecting stand and waste pipe complete all as specified and directed |
| 47 | S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand bashin fixed to iron pipe complete all as specified and directed |
| 48 | S&F PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified and as directed . |
| 49 | S&F in repair 15 mm stop valves angular type, cast copper alloy, screwed down, high pressure with crutch or butter fly handlescrewed both endsforiron pipe or for unionsand fixed complete all as specified and as directed . |
| 50 | S&Fin repair brass chromium plated tubular towel rail, 20 mm dia, D type, 60cm long between flangs complete all as specified and as directed. |
| 51 | S&F in repairs 15mm bore fancy type chromium plated bib taps long body with crutch of butterfly handle screwed down for iron pipes complete all as specified and as directed. |
| 52 | Supply and fix in repairs of size 125 mm brass chromium plated shower rose with or without swivel joints, any size including fixing to steel pipe or union complete all as specified and as directed |
| 53 | S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flangecomplete all as specified and as directed. |
| 54 | S & F in repairs Soap dish, vitreous China white of approximate size 160 x 160 x 90 mm complete all as specified and as directed. |
| 55 | S&F in repair stainless steel kitchen plate rack overall size 900mm x 900mm make out of 1mm thick stainless steel sheet etc complete all as specified and as directed. |
| 56 | S&F in repair chromium plate curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge. |
| 57 | Suppy and fixing for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on Plastic plugs with chromium plated brass screws and cup washers complete all as specified and directed |
| 58 | Taking down PVC soil pipe with fittings from wall, treches of any description including fittings complete all as specified and as directed. |
| 59 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 60 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or walland complete all as specified and directed. |
| 61 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. |
| 62 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. |
| 63 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 64 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 65 | M&L PVC (SWR) Gullytrap, 125/110 mm dia setting and jointing with solvent cementetc complete and as direcetd. |
| 66 | Dismantling water tanks and removing to store of capacity exc 500 & n.exc 1000ltrs etc complete all as specified and directed. |
| 67 | S&F rotational moulded polythylene water storage tank (Cylendrical ,vertical with closed top) hoisted and fixed in position capacity1000 Ltrsall as specified in SSR Part-I complete all as specified and as directed. |
| 68 | S&F ball valves of 20 mm bore high pressure of PTMT with empxy coated aluminium rod and high density plastic ball screwed for iron pipe & fixed complete all as specified and as directed(Minimum weight 20 gms-210 gms) complete all as specified and as directed |
| 69 | S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairs including taking down the existing fitting complete all as specified and as directed. |
| 70 | Taking up or down existing steel tubing 15mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 71 | Taking up or down existing steel tubing 20mm dia bore and connections including cleaning for refixing or removal to store complete all as specified and as directed |
| 72 | Supplying, fixing, jointing and testinggalvanised iron tubing 15mm dia bore medium grade with all fitting sucg as elbow, bends, socket, reducer etc and fixed to wall or laid in floorcomplete all as specified and as directed |
| 73 | Supplying, fixing, jointing and testinggalvanised iron tubing 20mm dia bore medium grade with all fitting sucg as elbow, bends, socket, reducer etc and fixed to wall or laid in floorcomplete all as specified and as directed |
| 74 | Fixing old steel water tubibg 15mm dia bor and connection obtained from item No 70 here in before in new or old position fixed to wall, ceiling or laid in floor with new fittingcomplete all as specified and as directed |
| 75 | Fixing old steel water tubibg 20mm dia bor and connection obtained from item No 70 here in before in new or old position fixed to wall, ceiling or laid in floor with new fittingcomplete all as specified and as directed |
| 76 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed. |
| 77 | Material & Labour for writing letters or figures (block, Roman, Italic or Indian) n.exc.30 cm high complete all as specified and directed. |
| 78 | Dismantling floor, hearth or wall tiling including cement mortar bedding, (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed. |
| 79 | M&L 25mm thk PCC 1:2:4 type B-0 using 12.5 mm graded agg as in flooring finished fair and even without using extra cement complete all as specified and as directed. |
| 80 | M&L, screed bed or bedding layer of mortar 15 mm thick in cement mortar 1: 6 to receive tiles etc finished rough complete all as specified and directed. |
| 81 | M&L for High glossy light/dark shed Valenza Glazed ceramic tiles 8-9 mm thick (square/ rectangular),area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,polished, in floors etc.jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 82 | M&L for High glossy light/dark shed Valenza Glazed ceramic tiles 8-9 mm thick (square/ rectangular), area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm,as in skirtingfixed over and including 10 mm thick cement screed in (1:4 ) CM set and jointed in neat cement slurryand pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed. |
| 83 | M&L for non skid coloured ceramic tiles 6 to 8 mm thick (square / rectengular) area of each tile exceeding 0.38sqm but not exc 1.00 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etc completeall as specified and as directed. |
| 84 | Material & Labour glazed ceramic coloured tiles 1200x600x7-8 mm thick on skiriting/dado, set & jointed in neat cement slurry & pointed with white/coloured to match over 10mm thick bedding layer of mortar to wall in cm (1:4) for laying tiles on skirting/dadocomplete all as specified and as directed. |
| 85 | M&L for 18-20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite etc complete all as specified and directed. |
| 86 | Demolition of Reinforced Cement Concrete ofRoofs,floors(otherthan ground floors), beams, staircases, landing, chajjas and similar suspended work completed all as specified and directed by Engr-in-Charge. |
| 87 | S&F Mild steelTMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed. |
| 88 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 using 20 m gradedstone aggregate as in landings, kitchen slab, cover slabs (for men holes etc) chullah hoods,chhajjas water troughs mangers,shelves and similar articles with plain faces complete all as specified and as directed. |
| 89 | M&L for Formwork (rough finished surfaces of concrete flat) to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 90 | Demolition of brick work built in cement mortar complete all as specified and as directed. |
| 91 | M&L Brick work with sub class B bricks straight or curved on plan exe 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed |
| 92 | M&L for PCC (1:5:10) type E2 using 40 mm graded stone aggregate as in filling and mass concrete complete all as directed and as specified. |
| 93 | M&L for PCC 1:2:4 type B0 12.5 mm stone aggregate of avg 25 mm thick make to slope in sunken floors all as directed. |
| 94 | M&L for rendering 15 mm thick in cement mortar 1:3 Mixed with Water proffing compound andblack polyethylen film 175 micron laid in floor as per manufacturer instruction as per manufacturer instructions surfaces finished even and smooth without using extra cement complete all as specified |
| 95 | M&L for applying two coats of OMNIPLAS EP -101 eposy compound manufactured by M/S OM AGRO INDUSTRIES PLASTIC Pvt Ltd Bomboy or equivalent as approved by GE in proportions as per manufacturer instruction on complete surfaces of floor or wall of sunken portioncomplete all as specified and as directed |
| 96 | Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. |
| 97 | S & F in repair for 18mm thick UV coating, MDF board exterior grade, Both side laminated with any colour anti fungal,moisture resistence,anti borer, as per IS 14587 for kitchen/Cupboards shelfs fixing with 1st class hard wood lipping/beading and including necessary fixing aragement to wall etc. complete all as specified and directed by Engg-in-charge. NOTE:- (i) Sample and design of moduler box as approved by Engr-in-charge. (ii) Area will be measured only front side of moduler box for payment to contractor |
| 98 | S & F in repair 12 mm thick Plywood, grade BWP, type BB fixed with screws to timber frame workcomplete all as specified andas directed. |
| 99 | Supply & Fixing125 mm dia oval shape brass handle fancy type bright finish complete all as specified & directed. |
| 100 | S &F auto closing hinges 35 mm o crank ( KH-001) Or 8 crank ( KH-002) openable at 110 degree for kitchen cabinet shutterand fixed etc complete all as specified and direcetd. |
| 101 | Dismantling of timber scantling 40 sqcm and over for framed work and over in section, in any position complete all as specified and as directed. |
| 102 | M&L for Two coat of synethic enamel paint onnew steel surface, including preparation of surface, of any description over 10CM width or girthnot otherwise described over one coat of red oxidecomplete all as specified. |
| 103 | Supply and fixing CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 104 | S&F, plain, solid, straight, chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,supplied and fixed etc complete all as specified and as directed |
| 105 | S&F Aluminium peg set of five fixing with wall complete all as specified and directed |
| 106 | M&L for 60mm thick machine pressed precast concrete interlocking paver block any shape & size confirming to IS 15658-2006 of 60 mm thickness, M-35 grade with grey cement & no pigment complete all as specified and directed |
| 107 | M&L for sand filling under floors or in foundations including watering and consolidatiioncomplete all as specified and directed |
| 108 | M&Lhardcore of guage n exe 63 mm deposited, spread and levelled in layers n exe 15 cm thick, watered and rolled/rammed to a true surface broken stone or boulders complete all as specified and directed |
| 109 | M&L PCC 1:2:4 type B-0 using 12.5 mm graded stone agg as in coping on side of path including necessary from work etc complete all as specified and directed |
| 110 | Taking down carefully copper/ aluminium point wiring (light, fan, socket, or power) complete fitting such as switches, ceiling roses pendants, regulators, sockets, light fitting ceiling fan etc to be measured seperately ) removing materials for keeping in safe custody or for taking credit (credit for above items should be made as per conditions seperatly) and making good disturbed surface of walls floors etc all as specified and directed. Note-Responsibility after taking down fan/exhaust fan keep in safe custody of contractor and refix the same afterbefore completion of work the rate of same deemed to be included in the item quoated rate. |
| 111 | Taking down carefullyexisting wooden board , Main switch, MCB DB boxes with MCBs, sheet metal boxes, cut out, etc of any size anycapacity fromboards completeall as specified and as directed. |
| 112 | Taking down carefully sub main wiring / service connection twin core from wall / LT pole of any size of Aluminum with wooden batten and or through rigid conduit including GI wire and making good the disturbed surfaces of walls, roofs, floors etc complete all as specified and as directed. |
| 113 | M & L for concealed point wiring for one light point controlled by one switch complete with PVC insulated and unsheathed flame retardant low smoke and halogen ( FRLSH ) cable of 1.5 sqmm (nominal area) with multi stranded copper conductor single core 1100 volts grade in and including rigid PVC conduit not less than 20 mm dia, clip, with MS terminal boxes (not less than 1.6mm thick) and painted with one coat of red oxide primer all around and two coats of black bituminous paint from out side and two coat of aluminum paint from in side including common earth dollywith3 mm thick plastic laminated sheet top cover of approved make and colour including 1.5 sqmm green multi stranded copper conductor as continuous earth wire with lugs complete including cutting necessary chases on wall / ceiling surfaces for drawing of conduit & cables as required and making good disturbed surfaces of walls with CM 1:3:6 and matching with the existing surfaces including colour washing all as specified and as directed . |
| 114 | Ditto all as per item No 113 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on independent board. |
| 115 | Ditto all as per item No 113 above but One fan/exhaust fan point control by one switch & regulator |
| 116 | Ditto all as per item No 113 above but One 3/5 pin5 Amp socket outlet point controlled by one switch on same board. |
| 117 | S&F modular socket 20 amp with MCB 20 Amp \"C\" type all specified and complete. (For geyser) |
| 118 | Description all as per item No 113 above but using 2.5 sqmm single core multi stranded copper conductor PVC insulated and unsheathed flame retardant low smoke ( FRLS ) cable for 3/6 pin 15 Amp socket outlet controlled by one switch on independent board with 2.5 sqmm green stranded copper conductor as continuous earth wire with lugs complete all as specified and as directed. |
| 119 | S&F switch pianoflush button type 5 Amp single pole one waycomplete all as specified and asdirected. |
| 120 | S&F socket outlet 2in1, 3 pin, 5 Amp flush type complete all as specified and asdirected. |
| 121 | S&F switch piano flush button type 15 Amp single pole one way complete all as specified and asdirected. |
| 122 | S&F socket outlet2in1, 3 pin, 5 Amp and 15 Amp flush type complete all as specified and asdirected. |
| 123 | S&F ceiling rose,surface bakelite 63 x50mm three terminals completeall as specified and asdirected. |
| 124 | S & F Lamp holder,PVC/Urea type with back plate suitable for batten fittingscomplete all as specified as directed |
| 125 | S & F delux Fan Regulator electronic rotary, step type 240 Volt50 Hz,complete all as specified as directed. |
| 126 | S & F 9W/10W LED retrofit lamp B-22 holder base with polycorbonate body and aluminium heat sink complete all as specified as directed. Make C&S Cat No LTHPLEDLAMP7W/B22 or equivalent make as specified in Appndx\"B\" to PS . |
| 127 | M&L, sub main wiringwith two single core PVC insulated unsheathed FRLSH confirming to IS 694:2010, multi stranded copper conductor (ISI marked with valid CML No), cable 1100 Volt grade, 6 sqmm size drawn in and includingnon metallic rigid PVC concealed conduit medium grade (ISI marked with valid CML No) not less than 25 mm dia with all fitting & fixing accessories including one run single core PVC insulated unsheathed 6 Sqmm FRLSH confirming to IS 14930 (Part-I) 2001, copper conductor (ISI marked with valid CML No) colour code as a earth continuity and connected upto DB complete all as specified and directed.(NOTE: (i) Two run of single core PVC cable with one run of earth conductor and conduit shall be measured as one unit and the quoted rates shall be deemed to be inclusive for cutting chasesin wall/pillars/columns etc. of any description for concealing the conduits to required depth & making good the disturbed surface in cement mortar 1:4 including finishing the surface with putty to match with the existing surface. |
| 128 | S&F sheet metal enclosure double doorconcealed suitable for distribution boards when MCBs to be used having 100 Amp rated bus bar SPN DB 8 ways 240 V complete all as specified and as directed . |
| 129 | S&F MCB single pole and neutral 40 Amp / 63 Amp 240 V ,10KA , \"C\" series, complete all as specified and as directed with copper lugs complete all as specified and as directed . |
| 130 | S&F MCB single pole 6 to 32Amps 240 V,10KA, \"C\" series,complete all as specified and as directed |
| 131 | S&F TPN DB-DPX 125 MCCB DBs 4 way single door with provision for DPX 125 MCCB and as incomer and SP/TP MCBs as outgoing Nos of modules DPX 125+12, including 125 Amp MCCBcomplete all as specified and directed. |
| 132 | S&F MCCB 4 pole, 415V, AC , 3 phase, 50 HZ, breaking capacity 16 KA with fixed thermal and fixed magnetic setting of capacity 63 Amps 100% ICU complete all as specified and as directed. |
| 133 | Supply and fix LED 35/36 W building security light fitting,5700 K energy saving & environmental friendly long life versatile pressure die cast aluminiumIP 66.road way luminare with high power LEDs as light source and electronic driver suitable for pole dia 35 mm including 35 mm dia light grade tube bracket ,bend to shape 1.80 mtrlength with two nos of clamps of size 50mm x 6mm with nuts and bolts,washers etcincluding connection with 1.5sqmm threesinglecorePVC insulated and PVC sheathed cable stranded copper cable upto ceiling rose and fixing on walls/pole complete all as specified and directed. |
| 134 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 135 | Supply and laying GI pipe 50mm bore \"LIGHT GRADE\" in trenches, under floors, roads, along poles for protection of cables, including sealing ends complete all as specified and as directed. |
| 136 | Supply and fixing in repair 22 W LED 6000k4 feet Decorative ultra slim linear LED fitting fixture with extruded polycarbonate ,environmental friendly ,energy efficentinterated driver and 28watts lamp fitted including wiring upto and terminal into ceiling rose complete all as specified and directed by Engr-in- Charge. |
| 137 | Supply and Fixing Exhaust fans AC single phase 230/240V of size 300 mm sweep, 1250-1350 RPM with louvre complete including with all arrangement of making holes on wall, making good and finishing of disturbed surfaces matching with the existing surfaces, necessary fixing arrangement such as fastener bolts, nuts, washers etc, of appropriate size all as specified and as directed |
| 138 | Supply and laying or fixing or passing through HDPE pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel or strip and overall PVC sheathed,25 sq mm 4 core ISI Marked as per IS 7098 (Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etc complete all as specified and directed. |
| 139 | Returning filling in including spreading ,levelling,watering and well ramming in layers not exc 25cm complete all as specified and as directed. |
| 140 | Removing excavated soil to a distance n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as secified and directed. |
| 141 | S&F BLDC Ceiling fan complete with three aluminium blades down rod, snackel clamp, reel insulator, fan canopy split pin and accessories 230 V, 1200mm sweep with service value not less than 7.8, power consumption not more than 28 watt and minimum air delivery of 220 CMM, BEE 5 star rated, two core PVC insulated copper wire white sheathed of size 0.5 sqmm from fan connector to ceiling rose complete all as specified and directed.NOTE:-(I) Writing MES no in 20mm letter size with black paint etc is deemed to be included in quoted rate. (ii) Old fan deposit in store yard. |
| 142 | S&F LED T/L fitting complete with basic all purpose surface and wall mounted LED batten with aluminium housing and integrated electronic driver 10Watt capacity 2 feet long including connection from ceiling rose complete all as specified and as directed. |
| 143 | M&L for earthing completewith galvanisedsteelearth plateelectrode of size 600 mm x 600 mm x 6 mm thickweithing not less than 17.5 Kg buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below ground level, connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washers of galvanized iron or steel , procteded by GI pipe 15 mm bore( light grade)and watering pipe 20 mm bore GI pipe(light grade) andchamber of pcc 1:4:8 type D2 using 40 mm graded stone aggregate and coping shall be in PCC 1:3:6 type C1 using 20mm graded stone agg.50 mm thick cover of RCC 1:2:4 type B1 using 20 mm graded stone agg. reinforced with 8 mm dia MS tor bar @ 80 mm c/c both ways including excvation and earth work and removal of surplus soil complete all as shown in electrical plate no 3 of SSR PT 1, 2009 with charcoal dust and saltcomplete and earth leadconnected to earthing test point (up to main switches, DBs) completeall as specified &testing on completion. NOTE:-(I)item includes the cost of 7.5 mtr length GI pipe for protection for GI earth wire. (ii) item rates includes the cost of 7.5 mtr earth lead GI earth wire. (iii)PCC pit shall be provided at least 500mm away from the pit and not on the earth pit itself and the extra costof additional length of watering pipe,bends,elbow etc shall be deemed included in the unit rate. |
| 144 | Excavationin trenches in any type of soil not exc 1.5 mtrs wide and n exc 1.5 mtr in depth for laying of pipe/ cables/ poles etc and getting out complete all as specified and as directed. |
