|
| 1 | [B&R PORTION]Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing debries out side defence area complete all as specified and as directed by Engineer-in-Charge. |
| 2 | Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick light shade (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingcement screed bed 15mm thick in screed bed 1:4 base, complete all as specified. |
| 3 | All as per item no -2 but in vertical surfaces as in skirting / dadosetc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl. 10mm thick backing coat in CM 1:3 complete all as specified and as directed by Engineer-in-Charge. |
| 4 | Material and labour for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and includingcement screed bed 15mm thick in screed bed 1:4 base, complete all as specified. |
| 5 | Material and labour forcoloured glazed ceramic tiles coloured of size 300x 450x 7mmthickin vertical surfacesand jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10mm thick in cement plaster 1:3 complete all as specified and as directed by Engineer-in-Charge. |
| 6 | Material and labour 18-20 mm thick black granite stone slab of any type with table rubbed and polished in cooking platforms and like set in cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixture of pigment to match the shade of granite slab complete all as specified and as directed by Engineer-in-Charge. |
| 7 | Material and labour for 75mm thickPCC 1:2:4 type B-2 (using 40 mm graded curshed stone aggregate) as in floor/sub-base/hard standing etc finished even and fair including demolition of existing old cement concrete in ground floors and pavings not exceeding 15cm thickness (below or above) ground level complete including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 8 | Supply andfixing for heavy duty tiles (coloured), good grip series, size 300 mm x 300 mm x 10 mm thick, pattern as approved by Engineer-in-Charge, set, jointed and pointed in neat cement slurry @ 3.00 kg/square metre, laid over and including 20 mm thick (average thickness) cement mortar (1:4) bed, including dismantling of existing tiles etc including cement mortar bedding (but not backing) andrubbish off the premises complete all as specified and as directed by Engineer-in-Charge. |
| 9 | Material and labour PCC type B-1 1:2:4 (using 20 mm graded aggregate) as in kerbs of mud stops, rounded or chamfered on edges , etc complete all as specifiedand directed Engineer-in-Charge. |
| 10 | Taking up or down steel tubing and connections for 15mm dia including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge. |
| 11 | Supply and fixing Steel water tubing of 15 mm bore, medium grade galvanized,with all fittings laids in floor with wall and on ceiling, complete all as specifiedand directed Engineer-in-Charge. |
| 12 | Fixing only Steel water tubing of 15 mm bore, medium grade galvanized, with all fittings laids in floor with wall and on ceiling, complete all as specifiedand directed Engineer-in-Charge. |
| 13 | Taking up or down steel tubing and connections for 20mm dia including cleaning for refixing or removal to store complete all as specified and directed by Engr-in-charge. |
| 14 | Supply and fixing Steel water tubing of 20 mm bore, medium grade galvanized, with all fittings laids in floor with wall , complete all as specifiedand directed. |
| 15 | Fixing only Steel water tubing of 20 mm bore, medium grade galvanized, with all fittings laids in floor with wall , complete all as specifiedand directed. |
| 16 | Material and labour for cutting chases for concealed water tubing and making good, (cutting not exceeding 10 cm girth) (brick walls) in cement mortar 1:3, complete all as specified. |
| 17 | Supply and fixing PVC (SWR) Nahani /Floor trap, 75 mm dia of out let, plain with grating including jointing to waste pipe with solvent cement, complete all as specified. |
| 18 | Supply and fixing of lead free PVC celuka ply 18mm thick (minimum density 600kg/Cumof single side rigid lamination of approved colour and other side plain white colour, fixed with stainless steel screws solvent cement /adhesive to make kitchen cabinet cabinet shutters and shelves complete as per manufacturer \"s specification complete incuding dismantling baording, any description fixed in any posiition with nails etc complete all as specified and directed. |
| 19 | Supply and fixing Plain fillets second class hardwood .square,rectangular or triangular in section,Exc 6 & n exc 13 sq cmclean sawn, secured with nails or brads. |
| 20 | Supply and fixing plain fillets second class hardwood .square,rectangular or triangular in section n exc 3 sq cm bullnosed, splayed, chamfered or rounded on oneedge or face all as specified and directed |
| 21 | Supply and fixingcontinuous (Piano) hinges mild steel, bright finish or electro galvanised, width of flap 30mm completed as specified and directed. |
| 22 | Supply and fixing 100mm long hasp & staple, safety type, alu anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws completed as specified and directed. |
| 23 | Supply and fixing 100mm long Aluminium handles, cast type,anodised, complete all as specified and as directed by Engineer-in-Charge. |
| 24 | Demolition of brick work built in cement mortar or cement lime mortar including all pillars, quoins etc., complete all as specified. |
| 25 | Material and labour for Brick work with sub class ‘B’ bricks, locally known as “Awwal” straight or curved on plain exceeding 6 metre mean radius in cement mortar 1:6 , complete all as specified., complete all as specified. |
| 26 | Material and labour for brick work with sub class-\"B\" Bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and as directed by Engineer-in-Charge. |
| 27 | Taking down cement plaster on brick wall/concrete surfaces etc including racking out joints hacking for key scrubing down with water etc of any thickness including dado any descriptioncomplete all as specified and as directed by Engineer-in-Charge. |
| 28 | Material and labour for 15 mm thick rendering on faces of brick or concrete surfaces in CM 1:4. finishing the surface even and smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 29 | Material and labour for rendering 15mm thick in 1:6 CM on fair faces of brick work or concrete surfaces of walls. Fair andeven complete all as specified and as directed by Engineer-in-Charge. |
| 30 | Material andLabour for preparation of exposed brick wall surface by cleaning the surface wire brush to remove all dirt/loose materials from the bricks and from the joints between the bricks. Prepared surface should be then washed with diluted HCL acid (dilution ratio of 1:50) for three times in a day for two days. After acid wash surface should be allowed to be air dried for one day. Carrying out effloresence treatment to exposed and prepared wall surface in the following sequence. (a) Prime the prepared surface with one of the following product mixed with cement in 1:1 ratio as bonding agent : -(i) Pidicrete URP of M/S Pidilite. (ii) Sika Latex of M/S Sika.(iii) Nitobond SBR Latex of M/S FOSROC.(b) Immediately after priming the surface PMM (Polymer Modified Mortar) to be applied “BY HAND” while the prime is tacky. PMM should be prepared by mixing one of the following compounds in Cement Mortar 1:3 as per manufacturer’s instructions: -(i) Pidicrete URP of M/S Pidilite.(ii) Sika Latex of M/S Sika.(iii) Nitobond SBR Latex of M/S FOSROC. (c) PMM surface should be allowed to dry for one day. After that it should painted with two coats of one of the following compound mixed with cement only in ratio of 1 (selected compound) : 1:5 (Cement) : - (i) Pidicrete URP of M/S Pidilite.(ii) Sika Latex of M/S Sika. (iii) Nitobond SBR Latex of M/S FOSROC. (d) Now apply two coats of one of the following compound over the surface. These compounds are to be used as per manufacturer’s instructions: -(i) Pidifin 2K of M/S Pidilite (ii) Brush Coat of M/S Sika.(iii) Brush Bond of M/S FOSROC. (ii) Every stage of work will be approved by GE, then only next layer will be executed by contractor.NOTES : (a) The efflorescence treatment shall be carried out by the manufacturer or his authorised representative only. (B) The efflorescence treatment shall be carried out after taking down existing plaster redoing external/internal plaster under respective Items. (b) Make: Pidilite, DR Fixit or Equivalent make as approved by GE. |
| 31 | Material and labour for 10mm thick rendering in 1:3 cm on ceiling surfces finished even and smooth without using extra cement.complete all as specified and as directed by Engineer-in-Charge. |
| 32 | Material and labour forrough cast plaster on exterior walls in two layers, under layer 10mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm Rough cast plaster with sand gravel as specified as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the surface complete all as specified |
| 33 | Material and labour for two coats of cement base paint over a coat of alkali resistant primerof new surfaces of walls and incl preparationcomplete all as specified. |
| 34 | Material and labour for preparation new plastred surfaces of wall and applying two coats of oil bound distemper over a coat of primer applying with rolleretc complete all as specified and as directed by Engineer-in-Charge. |
| 35 | Material and labour for preparing surfaces New plastered surfaces of ceiling and applying three coat of white washing complete as all specified and directed. |
| 36 | Material and labour for complete removal of existing treatment on surfaces of walls, chajjas, facias etc and effloroscent salts and treating oil and greasy spots washing down with water and applying two coats of cement base paint over a coat of alkaline resistant primer including filling up all cracks with tar plastic (STP) crack filler and also, make good to plastered surface complete all as specified and as directed by Engineer-in-Charge. |
| 37 | Material and labour for preparating old plastered ofwall and applying onecoat of oil bound distemper incl chalk whitener etc complete all as specified and as directed by Engineer-in-Charge. |
| 38 | Material and labour for preparing surfaces old plastered surfaces of ceiling and applying one coat of white washing complete as all specified and directed. |
| 39 | Material and labour for PVC water storage tank 500 Litre capacity HDPE triple layer fixed & hoisted in position on staging or roof complete with locking arrangement, over flow pipe, air lock pipe, Ball valves, high pressure of PTMTincluding dismantling of old tanks of of any description complete all as specified and as directed by Engineer-in-Charge. |
| 40 | Supply and fixing (in repair) 15mm fancy type, chromium plated, angle cock, cast copper alloy, screwed down high pressure with crutch or butterfly handle, heavy with adjustable wall flange, complete all as specified. |
| 41 | Supply and fixing (in repair) stop cock, fancy type, chromium plated, long sank and cup (concealed type) screwed down high pressure with crutch or butterfly handle screwed both ends suitable for 15mm bore pipe, complete all as specified.(Note : Weight of stop cock shall not be less than 0.575 Kg)(Note : Weight of stop cock shall not be less than 0.575 Kg) |
| 42 | Supply and fixing ( in repair)CP bib tap screwed down high pressure, long body, cast copper alloy, chromium plated`with crutch or butterfly handles screwed down suitable for 15mm bore pipe or union, complete all as specified. (Note : Weight of bib tap shall not be less than 0.575 Kg) |
| 43 | Supply and fixing (in repair) for vitreous China squatting pan of Orrisa pattern size 580 x 440mm white (Ist quality) with ‘P’ or ’S’ trap, front or back inlet and foot rests of anypattern complete including provision of lime concrete bed and connection to flush pipe excluding flushing cistern, flush pipe and bracket and making good the disturbed area complete all as specified. |
| 44 | Supply and fixing (in repair) vitreous china wash hand basin white flat back of size 550x440mm including CI brackets and 15mm chromium plated pillar tap, PVC connection 450 mm long having PTMT nuts and chromium plated waste coupling and making good to disturbed portion including32 mm dia PVC waste pipe etc., complete all as specified. |
| 45 | Supply and fixing in repair 10 litre capacity flush polypropylene cistern, ISI marked, white at low level complete with PVC bend/flush pipe and making all connection including taking down existing high/low level cistern with all connections and making good the disturbed surfaces in cement mortar (1:3) to match with the existing surface, complete all as specified. |
| 46 | Supply and fixing, in repairs, 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC bldg Board or commercial plywood, fixedwith aluminium angled frame and two CP MS hanging arrangements all complete. |
| 47 | Supply and fixingin repair towel rail600mm longcomplete as specified and directed by Engineer-in-Charge. |
| 48 | Supply and fixing in repair Soap dish, any type, fixed to plugs with chromium plate brass screws complete as specified and directed by Engineer-in-Charge. |
| 49 | Supply and fixing in repair cast copper alloy, chromium plated shower rose incl long pipecomplete as specified and directed. |
| 50 | Supply and fixing in repair 32/38 mm PVC waste pipe for urinal , wash hand basin and sink all as specified. |
| 51 | Supply and fixing (in repair) PVC connections 450/600 mm long and 15mm diaPTMT with PVC washers on both ends, complete all as specified. |
| 52 | Supply and fixing in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12mm wide and chromium plated brakects guard and railing 60cm long fixed in repairs complete as specified and directed by Engineer-in-Charge. |
| 53 | Demolition and breaking up drain pipes100/75 mm (Salt glazed ware, AC or Reinforced concrete) set in cement mortar complete all asspecified. |
| 54 | Supply and fixing PVC (SWR) 110 mm pipe single socket in any length with rubber ring joints fixed to wall or infloors complete as specified and directed by Engineer-in-Charge. |
| 55 | Supply and fixing PVC (SWR) 75 mm pipe single socket in any length with rubber ring joints fixed to wall or in floor complete as specified and directed by Engineer-in-Charge. |
| 56 | Supply and fixing repairPVC (SWR) bends of 75mm radius, complete all as specified and directed by Engineer-in-Charge. |
| 57 | Supply and fixing in repair PVC (SWR) bends 110 mm bore complete as specified and directed by Engineer-in-Charge. |
| 58 | Supply and fixing repair 75mm PVC (SWR) junction single,(Single T) equal or unequal provided with access door, complete as specified and directed by Engineer-in-Charge. |
| 59 | Supply and fixing in repair PVC (SWR) vent cowl of 75mm dia, complete as specified and directed by Engineer-in-Charge. |
| 60 | Supply and fixingin repair PVC (SWR) junction single, (Single T) equal or unequal of 110mm dia with access door complete as specified and directed by Engineer-in-Charge. |
| 61 | Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), areanot exceeding 1.5 Sqmeach, complete as specified and directed by Engineer-in-Charge. |
| 62 | Taking down wooden chowkats or frames with shutter (without taking off shutter from the frames), areaexceeding 1.5 Sqm and not exceeding 4.00 Sqm each, complete as specified and directed by Engineer-in-Charge. |
| 63 | Supply and fixingof windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, completeall as specified and directedby the Engr-in-Charge. |
| 64 | Supply and fixingof ventilators made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 48 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished with suitableprovision as in ventilator in toilet/bathroom/staircase completeall as specified and directedby the Engr-in-Charge . |
| 65 | Supply and fixingof mild steel framed work as in door chowkats, grills ,ornamental gate of angle or other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides) and hanging also fastening and fixing etc complete allas specified and directed. |
| 66 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 75 x 50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantNote: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete allas specified and directed. |
| 67 | Supply and fixing of Factory made single extruded WPC (Wood Polymer Composite) solid door Frames/Chowkhat of size 125 x 65 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardantNote: For WPC solid door frames, minus 5mm tolerance in Dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made, complete allas specified and directed. |
| 68 | Supply and fixing ofFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ ricehusk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws,complete allas specified and directed. |
| 69 | Supply and fixing of providing30 mm thick factory made 100% Solid WPC (Wood polymer Composite) Jointless gauzed and skeleton Shutter of required size comprising of virgin PVC resin of K Value 57-60 ( Suspension Grade ),alcium Carbonate andnatural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheetSingle Extruded ( Inner ) with having minimum density not less than 650 kg/cbm manufactured and an ISO 9001 -2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 2000 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2 Modulus of elasticity 850N/mm2and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. Fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws incl Aluminum Jali and Stainless wiremess as per required. complete all as specified and as directed by Engineer-in-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company |
| 70 | Supply and fixing250 mmaluminum anodised sliding door bolts, ISI marked, with hasp, staple (bolt type) complete with clamps bolt not less than 16mm dia and fixing clips of sheet, cast or extruded section and fixing bolts an sliding bolt of extruded section or cast aluminum alloy, complete all as specified and as directed by Engineer-in-Charge |
| 71 | Supply and fixing for Aluminium anodised, 200mm long barrel tower bolts of extruded section and fixed complete all as specified and as directed by Engineer-in-Charge |
| 72 | Supply and fixing 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed by Engineer-in-Charge. |
| 73 | Supply and fixing 150mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring complete all as specified and as directed by Engineer-in-Charge |
| 74 | Supply and fixing 300mm, ordinary rat tail rod pattern springs including roller and roller plate completeif fixed to steel/ concrete chowkats with flat iron 40x3 mm size 75 cm long with necessary bolts, etc. complete as inrepairs, complete all as specified and as directed by Engineer-in-Charge |
| 75 | Supply and fixing repair stainlesssteel curtain rod (Grade 304) 25mm dia having wall thickness 1.6mmfixed with and including stainless steeldecorative brackets, two lotto for each rod length at both endetccomplete all as specified and as directed by the Engineer-in-Charge. |
| 76 | Supply and fixing in repair Stainless steel sink with draining board,made out of 1.00mm thick sheet for kitchen or laboratory with plug, washers waste pipe, cast iron cantilever rackets, connecting union overall size 915mmx460mm with bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engineer-in-Charge. |
| 77 | Material and labour for cutting and uprooting of grass vegitation over roof surfaces , roughning old bricks tile/concrete surfaces by picking sweeping clean wire brushing and washing down with water to remove dust etc incl flashing & junction of parapits filling damaged /open joints in CM1:3 and applying neat cement slury 3.00 kg/sqm complete all as specified and as directed by Engineer-in-Charge. |
| 78 | Material and labour for 40 mm thick (average thickness) PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) with WPC as in roof padding, levelling course, and finishing top surface even and smooth without using extra cement to recieve APP membrane, complete all as specified and as directed by Engineer-in-Charge. Note: WPC shall be measured and paid for separately. |
| 79 | Material and labour for 3mm th. APP (atactic polyproylene polymer) modified prefabricated five layer weight not less than 3.60 kg/sqm water proofing membrane black finish reinforced with non woven polyster matt and applying on top of it one coat of hot straight run bitumen grade30/40 (Grade S-35) conforming to IS-73 at the rate of 1.2 kg/sqm, make as approved consisting of a coat bituminous primer @ 0.40 ltr/sqm by the same membrane manufactures of dercity 0.87 ro 0.89 kg/ltr at 25\"C temprature and viscosity 70-160 cps over the primer coat with overlap of 100mm at the side and 150mm at the end , the layer membrane shall be laid using butane gas torch and sealing all joints etc after preparing the surface complete all as per standered parctice as per manufacture\"s instructions The vital plysical and chemical parameters of the membrane shall be under:- (i) Joint strenth in longitudinal and transverse ditection at 23\"c at 650/450 N/5cms (ii) Tear strength in longitudinal and transverse direction at300/250N/5 cms. Softing point of membrane nor less then 150\"c when tested in according with ASTM(d-5147) (iii) The laying if membrane shall be got down through the authriosed applicator or manufactures of membrane only complete all as spcified and directed. |
| 80 | Material and labour for providing, cement concrete in roof kerbs of mud stops, rounded or chamfered on edges, Type B1 1:2:4 (using 20 mm graded stone aggregate), complete all as specified and as directed by Engineer-in-Charge |
| 81 | Demolition of cement concrete in ground floors and paving n.exc 15 cm thicnkess (below or above ground level) for complete all as specified and as directed by Engineer-in-Charge. |
| 82 | Material and labour for 50mm thick Cement Concrete 1:3:6, type C-2( Using 40 mm Graded Stone Aggre-gate) as in plinth protection, laid in alternate bays , finished Concrete Surfaces Even and Smooth without using Extra Cement, expansion joint filled with 85/25 bitumen & saw dust as complete all as specified and as directed by Engineer-in-Charge. |
| 83 | Supply only integral water proofing compound, complete all as specified and directed by Engineer-in-Charge. |
| 84 | [E&M PORTION]Dismantling/taking down carefully aluminium/ copper point wiring (light, fan,socket or power) complete, including fixtures and fittings such as switches, ceiling roses, pendants, regulators , sockets, light fittings etc., removing materials to stores for keeping in safe custody for taking credit and making good the disturbed surfaces of walls,ceilings etc. complete all as specifiedand directed Engineer-in-Charge. |
| 85 | Material and labour for concealed point wiring using approved colour coding as per IS, with multi stranded copper conductor 1.5 sqmm (Nominal area), single core, FRLSH (FIRE Retardant Low Smoke and low Halogen), PVC insulated and unsheathed stranded cable drawn through and including non metallic,medium grade PVC concealed conduit not less than 20mm dia and its fittings including all tees, bell mouth pieces and fixing accessories such as couplers, saddlers, pipe hooks etc, PVC junction boxes ISI marked with GI metal flushboxes made out of 1.2mm thick of any module from 2 to 18module confirming to IS-5139(pt-I) of 1969 and IS:14772-2000 with earth dolly coated with two coats of anti corrosive paintincluding modular cover plates with frame i.e. inner and outer plate extended upto 25 mm over metal flush boxes for housing the modular switches, socket outlets, fan regulators etc with brass screws and brass washers and making good the disturbedsurfaces as per existing for one light / fan / Bell point contorlled by one switch including 1.5 sqmm single core PVC insulated and unsheathed FRLSH (FIRE Retardant Low Smoke and low Halogen) copper cable, 1100 volt grade with multi stranded copper conductor green colour as earth continuity conductor upto common earth and connecting to common earth dollywith suitable size of lugs for one light point/ fan point/bell point controlled by one switch complete all as specified and as directed.NOTES:- 1. Switch, socket and fan regulators to be measured and paid for separately.2. All chases will be cut by chase cutter only. |
| 86 | Description all as per item No 85.00 here in before but for socket out let point 5 Amps on same board complete all as specifiedand directed Engineer-in-Charge. |
| 87 | Description all as per item No 85.00 here in before but for socket out let point 5 Amps on independentboard complete all as specifiedand directed Engineer-in-Charge. |
| 88 | Description all as per srl item No 85.00 above but point wiring for one socket out let 15&5 Amps (independent) controlled by one switchwith using 2.5 Sq mm (nominal area) stranded copper conductor complete all as specifiedand directed Engineer-in-Charge. |
| 89 | Supply and fixing modular switches, one way,6 amps one module, 230V, 50 Hz supply, complete all as specifiedand directed Engineer-in-Charge. |
| 90 | Supply and fixing modularswitches, oneway, 16Amps, one module, 230 volt , AC supply, complete all as specifiedand directed Engineer-in-Charge. |
| 91 | Supply and fixingmodular socket outlet 6 amps, 2/3 pin combined 2 module, 230 volt, complete all as specifiedand directed Engineer-in-Charge. |
| 92 | Supply and fixing modular socket outlet 6/16 amps,3 pin, 2 module, complete all as specifiedand directed Engineer-in-Charge. |
| 93 | Supply and fixing fan regulator step type one module / 2 module, 100w 230 Volts, 50 Hz, AC complete all as specifiedand directed Engineer-in-Charge. |
| 94 | Supply and fixing modular switches, bell push,6 amps one module, 230V, 50 Hz supply, complete all as specifiedand directed Engineer-in-Charge. |
| 95 | Supply only lamp holder, PVC/polycarbonate type with back plate suitable for batten fittings, complete all as specified and as directed. |
| 96 | Supply and fixing ceiling rose surface bakelite 65x50mm, 3 terminal complete all as specifiedand directed Engineer-in-Charge. |
| 97 | Supply and fixingi door bell electric ,ding dong /musical type, single phase 230 volts, complete all as specifiedand directed Engineer-in-Charge. |
| 98 | Supply and fixing sheet metal enclosure SP with two pin and earth plug and socket inclduing metal clad topwith one single pole MCB 32 Amp complete all as specifiedand directed Engineer-in-Charge. |
| 99 | Supply and fixing of LED light fitting 1x20W (lumen efficacy of >100 lm/W) , 220V, AC with aluminium housing with batten type with driver , holder including 20W LED tube light for connecting up with three core flexiable copper conductor cable of suitablae size from celing rose to connector complete all as specifiedand directed Engineer-in-Charge. |
| 100 | Supply and fixing batten type withsurface mounted LED tube light fitting with high efficient diffuser mirror light,aluminiumhousingin CRCA body suitable and including 10 watt LED tube rod high efficient, AC 220-240 volts, 50 Hz and connecting with copper conductor flexible cable of size 0.50 Sqmm from ceiling rose to connector of the light including disconnecting and taking down old existing light fitting of any description and in any position complete all as specifiedand directed Engineer-in-Charge. |
| 101 | Supply and fixingbulk head light fitting, 10 watt, energy efficient withlamp 10 watt with provision of 2/3 core PVC copper conductor cable 0.5 Sqmm size from ceiling rose to light fitting completeincluding disconnecting and taking down old existing light fitting of any descriptioncomplete all as specifiedand directed Engineer-in-Charge. |
| 102 | Supply and fixingbracket for security light made up of 25/40/50mm dia suitable for security light, 0.6 metre long GI pipe,light grade, 120 degree bent to required length, fixed to wall with two clamps made of 20 x 3 mm mild steel flat minimum 15cm long, 4 nos 8mm dia bolts with nuts complete all as specifiedand directed Engineer-in-Charge. |
| 103 | Supply and fixing LED security light luminaire 30 watt , pressure die cast aluminum housing, toughened heat resistant glass, IP66 protection, better optics for uniform distribution with multiplte LEDshaving optical grade polycarbonate lens with all accessories internally pre wired and including connecting up with Two core 1.5 sq mmcopper conductor cable from connector to ceiling rose to connection of light including disconnecting and taking down oldunserviceable security light fitting of any description and in any positioncomplete all as specifiedand directed Engineer-in-Charge. |
| 104 | Material and labour for sub main wiring with two single core FRLSH PVCinsulatedunsheathed copper conductor cable 6sqmm drawnin and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories onwall or ceiling withone additional PVC insulated , strandedcopper conductor FRLSHof 6 sqmm, green colourfor earthcontinuity conductor including taking down old unserviceable sub main wiringand making good the disturbed surface complete all as specifiedand directed Engineer-in-Charge. NOTE:-3 run of 6.0 sqmmcable with concealed conduct shall be measured as 1 unit. |
| 105 | Material and labour for sub main wiring with two single core FRLSH PVCinsulatedunsheathed copper conductor cable 4 sqmm drawnin and including rigid non metallic PVC medium grade 25 mm dia New concealed conduit with accessories onwall or ceiling withone additional PVC insulated , strandedcopper conductor FRLSHof 4 sqmm,green colourfor earthcontinuity conductor including taking down old unserviceable sub main wiringand making good the disturbed surface complete all as specifiedand directed Engineer-in-Charge. NOTE:- 3 run of 4.0 sqmmcable with concealed conduct shall be measured as 1 unit. |
| 106 | Supply and fixing in repair sheet metal enclosures vertical distribution board VTPN,(MCCB DB) 4 ways, double door , 415 volts with 200 amps rated bus bar IP 54 protection, with shrouded neutral bar and insulated bus bar and earth link, with and includingMCCB 4 pole thermal release type ,125AMPS ,25 KAas incomer and MCB sas out going complete with making suitable size of MS cabinet 1.2 mm thick dully grouted on the wall (flush) with opening arrangement including making connections with suitable size of lugs and making good the disturbed surface matching with existing surface complete all as specifiedand directed Engineer-in-Charge. |
| 107 | Supply and fixing in repairSPN distibution board 8 way, double door, IP 43, as per IS 8623including 200 Amps fully insulated copper bus bar, insulated neutral bar, earth bar, door earthing, reversible doors, PAN assembly for easy installation and also incoming and outgoing connections with suitable size of lugs/thimbles /gland/gaskets complete all as specifiedand directed Engineer-in-Charge. |
| 108 | Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, \"B\" curve 6 to 32 Amps, complete all as specifiedand directed Engineer-in-Charge. |
| 109 | Supply and fixing in repair MCB single pole, 240 volts, 50Hz , breaking capacity 10KA, \"B\" curve 40 to 63 Amps,complete all as specifiedand directed Engineer-in-Charge. |
| 110 | Supply and fixing in repair MCB single pole and neutral 240 volts, 40 to 63 Amps,10KA, 50 Hz,\"B\" Series complete all as specifiedand directed Engineer-in-Charge. |
| 111 | Supply and fixing of LED lamp 9 watt B-22 base complete including taking down old existing lamp any type complete all as specifiedand directed Engineer-in-Charge. |
| 112 | Material & labour for earthing with Galvanised Steel earth plate electrode 60cmx 60cm x 6.0 mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer ofcharcoal dust and common salt filling in alternate layers and electrode connections by usingGalvanised Iron wire 4mmas earthing lead(upto terminal point) by means ofbolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 15 mm diaGI pipe connected to main switch board or main control board and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6)type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type ofsoil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 ofSSR 1991(Part-I) Taking out old unserviceable earthing complete all as specifiedand directed Engineer-in-Charge. NOTE : - The rates for earth work, GI protection pipe, funnel, wire wesh, CI cover, etc shall be deemed to beincluding in quoted rates. |
| 113 | Supply and fixing heavy duty PVC body wall mouting fan 400 mm sweep with corrosion resistant PVC body minimum noise, operation and maintance free designtotally enclosed highly efficient heavy duty motorwith pressure die cast aluminumrotor mounted on two ball bearings aerody namically contoured blades rigid frame ,1400 RPM PVC blades and testingcomplete all as specified and as directed by Engineer in Charge. |
| 114 | NOTE:- Amount of credit ofRs. 92,110.50 for retrieved materials is mentioned in Schedule of Credit Page No 21.00 & 22.00 of tender documents in pdf form which will be deducted offline while acceptance of tender. |
