|
| 1 | Demolition of PCC as in roof pedding(Incl APP membrane) (other than ground floors), beams, staircases, landing,chajjas and similar suspended work complete all as specified and directed. |
| 2 | M & L for cement concrete M15 (Nominal Mix) using 12.5 mm nominal size graded crushed stone aggregate mixed with water proofing compound as levelling course of roof padding finished even and fair to receive APP membrine complete all as specified and as directed. Note:- Water proofing compound shall be measured and paid for separately. |
| 3 | M & L for preparing RCC roof surfaces with wire brush drying and cleaning to remove all foreign materials and washing with water to remove loose particle and applying APP membrane HMHDPE 3 Kg plain (thickness 3 mm) (total weight of the finished membrane not less than 3.0 kg/ sqm ± 5 % per sqm) confirming to IS 16540: 2017 of following operation complete all as specified and directed:-(a) Applyinga coat of bitumen primer for bitumen membrane @ 0.40 litre/sqm by the same membrane manufacture of density at 25⁰C, 0.87-0.89 kg/ litre and viscosity 70-160 cps, laying over the primer coat using Butane Torch and sealing all joints, overlapping etc. as per Annex D of IS 16540: 2017 (b) Applying hot blown grade bituminen 85/25 @ 1.20 Kg/Sqm over primer.(c) Laying of polymeric water proofing membrane of weight not than 3 kg/Sqm |
| 4 | M & L for cutting grooves or chase in brick wall, 75 mm wide and 65 mm deep and including filling with cement mortar 1:3 mixed with water proofing as mentioned in Annex D of IS 16532: 2017, IS 16540: 2017 compound complete all as specified and as directed. |
| 5 | Demolitionof brick work built in cement mortar of any description incl quions arches but excluding aslars facingcomplete all as specified and directed. |
| 6 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exc. 6 mtr mean radius built in CM(1:6)complete all as specified and directed. |
| 7 | M&L for brick work with sub class B bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4complete all as specified and directed. |
| 8 | Taking down plaster on brick or concrete surfaces including raking out joints for key and srubbing down with water etccomplete all as specified and directed. |
| 9 | M&L for rendering 15 mm thick on fair faces of brick or concrete the surface even and smooth without using extra cement in CM (1:4)Mixed with water proofing compound @ 3% complete all as specified and directed.( Note :Water proofing compound shall be measured and paid separatel) |
| 10 | Supply only integral water proofing compound complete all as specified and directed. |
| 11 | M&L for rendering 15 mm thick on fair faces of brick or concrete surfaces including finishing even & smooth without using extra cement. in CM (1:6) complete all as specified and directed. |
| 12 | M&L for 5mm rendering thick in CM (1:3) on concrete sufaces, finished even & smooth (without using extra cement), complete all as specified and directed. |
| 13 | M&L for sunken floor treatment as in following precedence (i) The treatment of existing sunken floor is to be dismantled upto full depth of Sunken RCC Slab and the surfaces both vertical and horizontal shall be cleaned by removing all loose mortar, dirt, dust etc. by chisel, hammer, wire brush/Jute Brush and Air Blower machine than apply two coats of elastomeric compound viz back bond WPC-30 over one coat on neat primer i.e. Super latex be applied on clean surface.(ii) Provide 40mm thick PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in sub base and provide 40mm dia GI pipe med gde as in(spout) of 600mm long as in sunken portion. (iii) Then rendering 15mm thick in CM 1:3 using liquid water proofing compound @ rate 200 ml per 50 Kg bag of cement on horizontal and vertical surfaces of sunken portion.Note: Water proofing compound shall be measured and paid separately. (iv) The sunken floor tested for leakage/seepage by ponding it with water for minimum 72 hrs.(v) Then fill the remaining sunken portion with PCC 1:5:10 using brick aggregates including fixing sanitary items requiring embedding in cement concrete. To ensure that there shall not be any seepage/dampness in the slab as seen underneath and side. |
| 14 | M & L for mechine cut kota stone slab flooring 20-25 mm thickover cement screed20mm thick base laid and jointedwith white cement slurry with pigment including cutting and polishing in CM(1:6)complete all as specified and directed. |
| 15 | M & L for mechine cut Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed/backing coat and jointed with white cement slurry with pigment including cutting and polishingcomplete all as specified and directed. |
| 16 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons etc., laid, bedded and pointed in any mortarcomplete all as specified and directed. |
| 17 | Demolition of cement concrete in ground floors and pavings n.exc. 15cm thick above or below ground level complete all as specified and directed. |
| 18 | M&L for 75mm thick cement concrete (1:3:6) type C-2 using 40mm graded stone agg finished even & smooth using extra cement as in plinth protection, complete all as specified and directed. |
| 19 | M & L for 3 mm thick Glass dividing strips forming joint to full depth at every 3.0m interval and at every charge of direction and filled mixturein plinth Protection complete all as specified and directed. |
| 20 | M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 complete all as specified and as directed. |
| 21 | M&L for Non-skid ceramic colour tiles7 to 8 mm thick , (square/rectangular), area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm, in dado/skerting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 10 mm thick backing coat in cement sand mortar 1:4 complete all as specified and as directed. |
| 22 | M&LNon skidceramiccoloured tiles7mm to 8mm (square/rectangular) area each tiles exc. 0.11sqm but not exc. 0.18 sqm in floors thick in floor etc set & jointed in neat cement slurry and pointed in white cement and pigmentover 15mm screed bed or beadinglayer in CM 1:4complete all as specified and directed. |
| 23 | M&LGlazed ceramiccolour tiles of size 300 x 450 x7mm thick in vertical wall etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 complete as specified and directed. |
| 24 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed. |
| 25 | M&L for Granite (of any type) tiles 20mm thick machine cut, in , bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including grinding and polishing complete all as specifed and directed. |
| 26 | Rounding to edges of stone slabs one edge such as in steps cooking platform and other similer shine complete all as specified and as directed. |
| 27 | Taking down chowket or frame exc 1.50 sqm but n. exc. 4.00 sqm with shutters (wihtout taking of shutter from frame ) etccomplete all as specified and directed. |
| 28 | Taking down chowket or frame n.exc 1.50 sqm with shutters (wihtout taking of shutter from frame ) etc complete all as specified and directed. |
| 29 | Taking down shutters of any description exceeding1 sq.m and not exceeding2 sqm eachcomplete all as specified and directed. |
| 30 | M&L for Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,etc., complete, as specified, supplied and fixed (125x60mm) complete all as specified and directed. |
| 31 | M&L for cement concrete 1:3:6 type C-1 using 20 mm graded stone aggregate for fixing hold fast, coping, cills and filling in pressed steel door frames including necessary form work and finishing the surfaces to match with existing, complete all as specified and directed. |
| 32 | M & L for 2 nd class hard wood factory made 35mm thick plain framed pannelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed. |
| 33 | M/L for2nd class HW 35mm thickGlazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares(without sash bars ), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed. |
| 34 | S & F for 300mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed. |
| 35 | Supply and fixing 150mm size Extruded aluminium alloy handles, fabricated type anodised complete all as specified and directed. |
| 36 | S&F150mm aluminium anodised barrel tower bolts of extruded section and fixedcomplete all as specified and directed. |
| 37 | S & F for 300mm mild steel , ordinary rat tail rod pattern springs, including roller and roller plate complete all as specified and as directed. |
| 38 | S & F Mild steel work in framed work such as grills, gratings,framed guard bars, ladders etc., with ends of bars shouldered and/ or riveted, or forged into spikes, and similar work confirming to Fe 290 - Gde-E-165complete all as specified and directed. |
| 39 | S & F for factory solid PVC door frame of size 50mm x 47 mm made out of 5mm wood grain printed PVC sheet reinforced with MS Square tube as per specified & drawing in opening complete all as specified and directed. |
| 40 | S & F for Factory Made Solid PVC Moulded Door Shutter, 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm Plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face complete all as specified and directed. |
| 41 | S&F for MSbutt hinges of 100 mm size cold rolled mild steel medium weight, ISI marked complete all as specified and directed. |
| 42 | S & F stainlesssteel wire cloth, 0.36 mm nominaldia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples. |
| 43 | S & F in repair Galvanized mild steel wire cloth, 0.56 mm dia of wire and average width of aperture 1.18 mm and fixed with tinned stacks, or galvanized wire stapleswooden bead complete all as specified and directed. |
| 44 | Preparation of new wooden surfaces of any description,over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 45 | Preparation ofold wooden surfaces of any description,over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and as directed. |
| 46 | Preparation of oldsteel surfaces of any description,over 10cm width or girth and applyingonecoats of synthetic enamel paint, complete all as specified and as directed. |
| 47 | Dismantling unserviceable PVC water storage tank of 500 Ltr capacity, complete all as specified anddirected. |
| 48 | Supply and fixing 500 ltrrotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position withall as specified in SSR Part I complete all as specified and directed. |
| 49 | S&F in repair Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for ironpipe and fixed. (Minimum weight 210 gms) complete screwed for iron pipe or brass ferruleof size 20 mm bore complete all as specified and directed. |
| 50 | S&F Vitreous china water closet Orissa pattern long pansize 580x440mmwith trap front or back inlet and integral foot rest complete fixed in repair including lime concrete bedding and connection to drain or outgoing pipe and to flushing pipe and anti siphon pipe complete all as specified and as directed. |
| 51 | S&F for in repair vitreous china wash basin white flat back size 550x400mm including pedestal excluding taps , waste but including brackets as in repair, complete all as specified and directed. |
| 52 | S&F for 600x450mm beveled edge mirror of selected quality glass mounted on 6mm thick AC building board on commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 53 | S & F in repairbrass chromium plated tubular towel rail, 20 mm dia., D Type, 45 cm long between flanges, complete all as specified and directed. |
| 54 | S & F in repair PVC connection 15mm size with PTMT nuts of length 450mm long complete all as specfied and directed. |
| 55 | S & F in repair Bib taps cast copper chromium plated fancy type with crutch or butterfly handle screwedfor iron pipe or for brass ferrule of 15 mm bore diacomplete all as specified and directed. |
| 56 | S & F in repair pillar cock, chromium plated, fancy type for iron pipe or for brass ferrule of 15mm bore diacomplete all asspecfied and directed. |
| 57 | S & F in repairs Fancy type chromium plated with long shank and cup (Concealed type) 15 mm bore Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unionscomplete all as specified and directed. |
| 58 | S & Fin repair soap dish vitreous china white approximate size 160 x 160 x 90 fixed to plug with chromium plated brass screw complete all asspecfied and directed. |
| 59 | S&F for 32 mm bore low density polyethylene pipe (LDPE) of pressure rating 6 Kgs/cm2 as in waster pipe for WHB and urinal waste pipecomplete all as specified and directed. |
| 60 | S & F repair in 10 ltr low level PVC value less, syphonic action type flushing cistern,white, with ball value, float and handle including bracketscomplete all as specified and directed. |
| 61 | S & Fixed in repairs Angle stop valve cast copper alloy, with fancy type chromium plated capstan head, screwed down, h complete all as specified and directed.complete, all as specified. |
| 62 | S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing tosteel pipe or unioncomplete all as specified and directed. |
| 63 | S & F in repairs 20 mm dia Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed in repairscomplete all as specified and directed. |
| 64 | M & L for PVC (SWR)multi floor trap diameter of outlet 75 mm with grating including jointing with solvent cementcomplete all as specified and directed. |
| 65 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 110mm borecomplete all as specified and directed. |
| 66 | S&F PVC (SWR) pipes single socketed in any length with rubbering joints fixed to walls 75 mm borecomplete all as specified and directed. |
| 67 | S&F PVC (SWR) bends any radius 110mm bore with access door complete all as specified and directed. |
| 68 | PVC(SWR) junction single (single \"T\") equal or unequal 110mm bore with access to door complete all as specified and directed. |
| 69 | S&F PVC (SWR) bends any radius 75 mm bore with access door complete all as specified and directed. |
| 70 | PVC(SWR) junction single (single \"T\") equal or unequal 75 mm bore with access to door complete all as specified and directed. |
| 71 | S&Fin repairstainless steel sink1.00mm thick for kitchen with plug , waste pipe , washers incl bedding in cement mortar to platform l or including fixing cantilever cast iron brackets, connecting union to pipe. overall size 495x420mmbowl size 410mmx330mm x160mm complete all as sepcified and directed. |
| 72 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia15 mm,complete all as specified and directed. |
| 73 | S&F Steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm,complete all as specified and directed. |
| 74 | Refixing old steel tubing and connections in new or old position with all fittings retrieved from Serial here-in-before and fixed (walls, ceiling, floors, etc) of 15 mm dia complete all as specified and as directed. |
| 75 | Refixing old steel tubing and connections in new or old position with all fittings retrieved from Serial here-in-before and fixed (walls, ceiling, floors, etc) of 20 mm dia complete all as specified and as directed. |
| 76 | Taking up or down 15 mm steel tubing and connections including clearing for refixing or removal to storecomplete all as specified and directed. |
| 77 | Taking up or down 20 mm steel tubing and connections including clearing for refixing or removal to storecomplete all as specified and directed. |
| 78 | TMT steel bars 10mm dia and over, cut to length bent to shape required, including cranking, bending spirally for hooping to columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90mm dia, complete all as specified and directed. |
| 79 | Form work to soffit of suspended slab such as roof slab/cooking platform not exc 200mm thick horizontal or slopinf flate including fair finished to concrete surfacescomplete all as specified and directed. |
| 80 | M&L RCC 1:2:4 Type B-1 (using 20 mm graded aggregate) inRoof slab, shelves supported on wall/column and the like etccomplete all as specified and directed. |
| 81 | Demolition of Reinforced Cement Concrete of any description and in any position not otherwise specifically provided forcomplete all as specified and directed. |
| 82 | S & F Second class hard wood plain fillets square, rectangular or triangular in section, wrought secured with screws, cross sectional area exceeding 13 and not exceeding 25 Sq. cmcomplete all as specified and directed. |
| 83 | 18/19mm thick Prelaminated particleboard, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination fixed with screws to timber frame workas incupboards , kitchen cabinat etc fixed in repairs complete all as specified and directed. |
| 84 | S & F Continuous (piano) hinges,width of flap when open is 30 mm mild steel, bright finish or electrogalvanisedcomplete all as specified and directed. |
| 85 | S & F 75 mm long Extruded brass handles, fabricated type polishedcomplete all as specified and directed. |
| 86 | S&F Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed for cup Board shutter etccomplete all as specified and directed. |
| 87 | S & F hasp and stapple, safety type ofAluminium, anodised, including bolt to hinge type, fixed with screws of 100 mmcomplete all as specified and directed. |
| 88 | S & F in repair block boards 25mm thick, grade 2 quality, interior grade, commercial type, fixed with screws to timber frame-workcomplete all as specified and directed. |
| 89 | S & F for Harrison rails, 20/25mm dia aluminium alloy rod (Poles, finials , ring & bracket complete all as specified and directed. |
| 90 | M&L for preparation of new plastered surfaces of walls with appropriate thickenss of wall care putty( Minimum thick 1 mm) and applying two coats of distemper oil emulsion complete over chalk whitening primercomplete all as specified and directed. |
| 91 | M& L for complete removal of existing treatment by scrapping, wire brushing from old walls and applying two coats of oil bound distemperover chalk whitening primerincluding preparation of surfaces with wall care puttycomplete all as specified and directed. |
| 92 | M&L for preparation of old decorated plastered surfaces of ceiling including cornices, pilasters etc and applying two coat of white wash complete all as specified and directed. |
| 93 | M&L for preparation of new plastered surfaces of ceiling including cornices, pilasters etc and applying three coat of white wash complete all as specified and directed. |
| 94 | M&L for preparation of old decorated plastered surfaces of wall including cornices, pilasters etc and applying one coat of white wash complete all as specified and directed. |
| 95 | M & L for preparing new plaster surfaces walls including chajjas, facias etc including smoothening surface with wall care putty as per manufacturer\"s instructions and applying two coat of weather proof acrylic exterior paint (100% Acrylic) over a coat of primer including scaffolding, trestles, ladders, cradles and necessary safety measures complete all as specified and as directed. |
| 96 | M & L for complete removal of existing treatmentand appllying two coats of weather proof exterior paint over a coat of primer and putty where required on wall including preparation of surfaces complete all as specified and directed. |
| 97 | Providing and fixing ECO-4000 series pre-coated double rebated openable window or ventilator made out of galvanised steel colour coated (base steel as per IS 513 of \"D\" quality galvanised as per IS 277 with zinc of 120 gm/Sqm) with total thickness of coating 0.58 microns thick and black coated with polyster paint of 12 to 16 microns thick and back coated with alkyd backer 5-7 microns thick outer or powder coated with ployster powder up to 50-60 microns thick outer frame section 72X55 mm, centre mullion section 72X50 mm, shutter section 47X20 mm, fly mesh section 40X20 mm and the fixed glass beading section 12X12 mm outer frame and mullions shall consist rebate for glazed shutter, fly mesh and 20 mm provision for gaurd bars/grills, the section cut to length miter with corner brackets, center mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and paneled with 5 mm thick pain float glass and stainless steel (304 grade mesh) mesh for fly mesh shutter fitted with EPDM (Ethyl Propylene Diamine monomer) gaskets including fixing window with concrete/stone or brick masonary wall by means of self expanding sleeves and driving MS electroplated 80 mm long bolt into the sleeves through frames (minimum 4 nos for 1600 mm high windows, 3 nos for 1200 mm less window and 2 nos in ventilator), including 10 mm square bars welded to 6X12 mm flat at a distance 125 mm c/c etc as per direction of engineer in charge. Note - Refer TD No CELZ/C-TD/102 sheet 1/2 and 2/2. |
| 98 | Preparation of newsteel surfaces of any description,over 10cm width or girth and applyingtwocoats of synthetic enamel paint over a coat of red oxide primer , complete all as specified and as directed. |
| 99 | Taking down carefully existing aluminium/copper point wiring of any type/size (Light, fan, bell, socket, power socket etc complete with board outlet boxes fitting and fixtures such as switches, sockets, lamps holders, brackets, ceiling rose etc and removing from site and making good the disturbed surface of wall /floor etc to match existing complete all as specified and directed. |
| 100 | Taking down existing sub main wiring of any type/size complete from wall and making good distrubed surface complete all as specified and directed. |
| 101 | Taking down existing main switch /DBsw/ac boxany type/size complete all as specified and directed. |
| 102 | Taking down carefully ceiling fan/exhasut fan (of any size/make) from the existing position complete all as specified and directed. |
| 103 | M&L for point wiring with 1.5 Sqmm PVC FRLS insulated, unsheathed, copper conductor, stranded 1100 volt grade cable in & incl PVC Casing & Caping of size not less than 25 x 12mm / 32 x 12mm suitable as per site reqmt, ISI markedwith all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, screws, gutti / roul plugs PVC all as per site requirements including concealed modular terminal boxesfor mounting of switches/ sockets/regulator etc and PVC FRLS insulated & unsheathed 1100 volt grade copper conductor, stranded 1.5 sqmm. cable as continuous earth lead connected to common earth dolly complete all as specified and as directed colour coding of cables such as Phase -Red, Neutral – Black, and Earth – Green. |
| 104 | For one light point/fan Point controlled by one way switch. |
| 105 | For one 5 Amp independent socket controlled by one switch. |
| 106 | For one 5 Ampsocket controlled by one way switch on same board. |
| 107 | All as per item No 103 here-in-before but for power point wiring with 2.5 Sqmm FRLS PVCinsulated, unsheathed, copper conductor, stranded 1100 volt grade cable and 2.5 Sqmm FRLS PVCinsulated, unsheathed, copper conductor, stranded 1100 volt grade cable for earth continuity complete all as specified and directed. |
| 108 | All as per item No 103 here-in-before but one call bell point controlled by one bell push button switch complete all as specified and directed. |
| 109 | All as per item No 103 here-in-before but one light point controlled by one two way switch complete all as specified and directed. |
| 110 | Material and labour for sub main wiring with 2 x 6 Sq mm PVC insulated single core unsheathed stranded copper conductor drawn in and including PVC casing capping including continuous running earth wire by 6Sqmm PVC unsheathed single core stranded copper conductor connected to common earth dolly including plastic terminal boxes completed all as specified and directed. |
| 111 | Supply and fixing modular plate with frame of 8 module completeall as specified and directed. |
| 112 | Supply and fixing modular plate with frame of 6 module completeall as specified and directed. |
| 113 | Supply and fixing modular plate with frame of 4 module completeall as specified and directed. |
| 114 | Supply and fixing modular plate with frame of 3 module completeall as specified and directed. |
| 115 | Supply and fixing modular plate with frame of 2 module completeall as specified and directed. |
| 116 | Supply and fixing modular switch 1 way 10 Amps 1 module complete all as specified and directed. |
| 117 | Supply and fixing modular fan regulator 2 module stepped type completeall as specified and directed. |
| 118 | Supply and fixing modular switch 1 way 16 Amps 1 module complete all as specified and directed. |
| 119 | Supply and fixing modular socket 6 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 120 | Supply and fixing modular socket 6/16 Amps 2/3 Pin combined 2 module complete all as specified and directed. |
| 121 | Supply and fixing modular switch bell push 6 Amp 1 Module complete all as specified and directed. |
| 122 | Supply and fixing modular switch 2 way 6/10 Amps 1 module complete all as specified and directed. |
| 123 | Supply and fixing in repair ceiling rose surface bakelite 65 x 50 mm three terminal complete all as specified and directed. |
| 124 | Supply and fixing in lamp holder, PVC/Polycarbonate type with back plate suitable for batten/pendant fitting complete all as specified and directed. |
| 125 | Supply and fix in repair LED Adora Plus lamp 09 watt 2 starsuitable for 240 volt complete all as specified and directed. |
| 126 | Supply and fixing in replacment of call multi Music type single phase 230 volt complete all as specified and directed. |
| 127 | S&Fixing MCB DB double door TPN4 way 415 Voltcomplete all as specified and directed. |
| 128 | S&Fixing MCB DB double door SPN12 way 240 Voltcomplete all as specified and directed. |
| 129 | S&F MCB TPN 63 Amp,415 Volt, `C\" Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 130 | S&F MCB SPN 40- 63 Amp 230 Volt,`C\" Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 131 | S&F MCB SPN 20 to 32 Amp 230 Volt,`C\" Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 132 | S&F MCB SP 6 to 32 Amp 230 Volt,`C\" Curve, with breaking capacity 10 KA complete all as specified and directed. |
| 133 | S&F in repairs E-Lite LED Pride Ultra NXT LED tube light fitting 20 watt, 6500 K, decorative ultra slim square profile LED lighting fixtures with extruded polycarbonate, environmental friendly, energy efficient complete all as specified and directed. |
| 134 | All as per item No 130 above but 10 watt complete all as specified and directed. |
| 135 | M&L for refixing/handing of ceiling fan/exhaust fan and connection up including provision of cable from ceiling rose or connector to fan all as specified and directed. |
| 136 | M&L for refixing of geyser and connection up including provision of cable from power point complete all as specified and directed. |
| 137 | M & L for earthing complete with galvanised steel earth plate electrode 600 x 600x 6mm burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edged of the plate not less than 1.5 mtr below normal ground level,connected to galavanised iron earth lead by means ofbolt, nut, check nut and washer of galavanised iron steel wire 4mm dia as earthing lead as shown in Electrical Plate No 4 of SSR Part I connected to earthing test point all as specified or indicated including testing on completion including necessary excavation and earth work in soft/ loose soil, earth pit in PCC 1:3:6 typeC1 using 20mm stone aggreate, funnel, 20mm dia GI med grade water pipe, 15mm dia GI light grade earth lead protection pipe, CI frame and cover, wire, copper lugs,wire mesh, charcoal or coke and common salt in alterative layer all around the earth electrode compacted thickness 15 cm including excavation and earth work pit cover including disposal of surplus soil to a distance not excessding 50m, complete testing on completion all complete as shown in electricalplate no-4 of SSR part No1 all as directed. |
| 138 | Taking down old serviceable electronic meter of any size and any capacity and refixing the same after completion of work at original site of work including necesary connection complete all as specified and directed. |
| 139 | Material and labour for fixing of street light bracket made out of 32 mm dia light grade GI pipe 1.5 mtr logn and bend to required shape to luminate the area complete all as specified and directed. |
| 140 | S&F building security light LED fitting with pressure die cast housing, epoxy powder coated dark graphite grey colour finish and prismatic polycarbonate cover with individual LED lences suitable for including lamp LED 20 watt, fixed / connect properly at directed location on building complete all as specified and directed. |
