|
| 1 | DSR-2023 ITEMS |
| 2 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : |
| 3 | 1:2:4 (1 cement : 2 coarse sand(zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources |
| 4 | 1:5:10 (1 cement : 5 coarse sand(zone-III) derived from natural sources : 10 graded stone aggregate 40 mm nominal size derived from natural sources |
| 5 | Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor, etc., up to floor five level, excluding the cost of centering, shuttering and finishing : |
| 6 | 1:2:4 (1 Cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 7 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : |
| 8 | 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 9 | Centering and shuttering including strutting, propping etc. and removal of form for : |
| 10 | Foundations, footings, bases of columns, etc. for mass concrete |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. |
| 12 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 13 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: |
| 14 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 16 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 17 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. |
| 18 | Cement mortar 1:4 (1 cement :4 coarse sand) |
| 19 | Deduct for not providing hinges in doors, windows or clerestory window shutters with : |
| 20 | Stainless steel butt hinges with stainless steel screws : |
| 21 | For 2nd class teak wood and other class of wood shutters. |
| 22 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: |
| 23 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. |
| 24 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) |
| 25 | 250x16 mm |
| 26 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 27 | 250x10 mm |
| 28 | 150x10 mm |
| 29 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 30 | 125 mm |
| 31 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. |
| 32 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. |
| 33 | Twin rubber stopper |
| 34 | Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. |
| 35 | In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. |
| 36 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approvedmake, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 37 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer ) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement :4 Coarse sand), jointing with grey cement slurry @ 3.3kg/sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 38 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. |
| 39 | 110 mm diameter |
| 40 | Providing and fixing on wall face unplasticised - PVC moulded fittings/accessories for unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. |
| 41 | Single tee without door |
| 42 | 110x110x110 mm |
| 43 | Bend 87.5° |
| 44 | 110 mm bend |
| 45 | Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. |
| 46 | 20 mm cement plaster |
| 47 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gram/litre, of approved manufacturer, of required shade and colour all complete : |
| 48 | New work (two or more coats) over and including water thinnable priming coat with cement primer having VOC content less than 50 gram/litre |
| 49 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade: |
| 50 | Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. |
| 51 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and of required shade and colour complete to give and even shade. |
| 52 | Old work (one or more coats) |
| 53 | White washing with lime to give an even shade : |
| 54 | Old work (two or more coats) . |
| 55 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. |
| 56 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 57 | One or more coats on old work. |
| 58 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 59 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 60 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq. meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground , all complete as per directions of Engineer-In-Charge. |
| 61 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 62 | Renewing glass panes, with putty and nails wherever necessary including racking out the old putty: |
| 63 | Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm). |
| 64 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 65 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:- |
| 66 | (i) Tank shall be emptied of water by pumping & bottom shall be cleaned of slit and other deposits. |
| 67 | (ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. |
| 68 | (iii) Chlorination of RCC internal surface by liquid chlorine. |
| 69 | (iv) The treated surface shall be dried using air jetting and all loose particles shall be removal from the surface. |
| 70 | (v) Finally the surface shall be treated with ultraviolet radiation etc. as per direction of Engineer-in-Charge. |
| 71 | Providing & fixing White vitreous china water closet squatting pan (Indian type) along with \"S\" or \"P\" trap including dismantling of old WC seat and \"S\" or \"P\" trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. |
| 72 | Orissa pattern W.C Pan of size 580x440 mm |
| 73 | Dismantling W.C. Pan of all sizes including disposal of dismantled materials i/c malba all complete as per directions of Engineer-in- Charge. |
| 74 | Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. |
| 75 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. |
| 76 | Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) |
| 77 | Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix) |
| 78 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. |
| 79 | Demolishing brick work manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge.. |
| 80 | In cement mortar |
| 81 | Removing mortar from bricks and cleaning bricks including stacking within a lead of 50 m (stacks of cleaned bricks shall be measured): |
| 82 | From brick work in cement mortar |
| 83 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 84 | Of area 3 sq. metres and below |
| 85 | Taking out doors, windows and clerestory window shutters (steel or wood) including stacking within 50 metres lead: |
| 86 | Of area 3 sq. metres and below |
| 87 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. |
| 88 | For thickness of tiles 10 mm to 25 mm |
| 89 | Dismantling of flushing cistern of all types (C.I./PVC/Vitreous China) including stacking of useful materials near the site and disposal of unserviceable materials within 50 metres lead. |
| 90 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved. |
| 91 | Providing and fixing wash basin with C.I. brackets, 15 mm PTMT pillar cock, 32 mm PTMT waste coupling of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required. White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm PTMT pillar cock. |
| 92 | Providing and fixing white vitreous china water closet squatting pan (Indian type) : |
| 93 | Orissa pattern W.C. pan of size 580x440 mm |
| 94 | Providing and fixing white vitreous china pedestal type (European type/ wash down type) water closet pan. |
| 95 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge. |
| 96 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. |
| 97 | 10 litre capacity - White |
| 98 | Providing and fixing solid plastic seat with lid for pedestal type W.C. pan complete : |
| 99 | White solid plastic seat with lid |
| 100 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : |
| 101 | Rectangular shape 453x357 mm |
| 102 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 103 | 20 mm nominal outer dia. Pipes. |
| 104 | 25 mm nominal outer dia .Pipes. |
| 105 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, i/c cutting and making good the walls etc. : Internal work – Exposed on wall. |
| 106 | 20 mm dia. nominal bore |
| 107 | 25 mm dia. nominal bore |
| 108 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 109 | 25 mm nominal bore |
| 110 | 20 mm nominal bore |
| 111 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 112 | 20 mm nominal bore |
| 113 | 25 mm nominal bore |
| 114 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
| 115 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 116 | 15 mm nominal bore |
| 117 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 118 | 15mm nominal bore |
| 119 | LMR ITEMS |
| 120 | Arranging electric welding machine at site for repairing works of collapsible shutter and other repair workswith necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary additional steel sections complete as per direction of Engineer-in-charge. (Note: Work of half day or part thereofat one compound shall be taken as one job.) |
| 121 | Repairing of aluminium door shuttersincluding taking out door shutter from position, repairing and tightening of all members including new aluminium cleats, pivots and screws wherever required and refixing in position all complete but excluding the cost of new floor spring or door closer required. |
| 122 | Removing blockage of floor trap, WC trap, RW pipe and sanitary pipes etc.including cleaning of pipes/ traps and disposal of garbage found to the nearest sewage dump etc complete. (Note: Rate includes the cost of necessary t&p, bamboo, rubber choke, etc.) |
| 123 | Cleaning of Sewer manholes of all sizes and depth including connecting sewer line in the compound by complete removal of earth, silt, sludge, brick bats, garbages etc and disposing off the same outside the compound at the authorized municipal dump or out of the township complete as per the direction of the Engineer-in-Charge. |
| 124 | Providing manual assistance for attending petty day-to-day maintenance services as & when required i/c all required T&P and scaffolding etc. (Note: Minimum time shall be reckoned as half day even if the time required for doing the job is less than half a day. Material required for maintenance shall be supplied free of cost.) |
| 125 | Semi skilled manual Assistance |
| 126 | Unskilled manual Assistance |
| 127 | Supplying of fittings & fixtures for day to day civil maintenance work as per I.S. standard and approved quality as per direction of Engineer-in-charge. |
| 128 | PTMTShort Body Bibcock 15mm nominal bore. |
| 129 | PTMT Long Body Bibcock 15mm nominal bore |
| 130 | PTMT Pillar cock 15mm nominal bore. |
| 131 | PTMT angle Stop cock 15mm nominal bore. |
| 132 | PTMT Ballcock for PVC Tank 20mm |
| 133 | PTMT urinal spreader |
| 134 | Flexible (coil shaped) PVC Waste Pipe 40 mm dia with length not less than 700 mm including PVC waste fittings. |
| 135 | Semi rigid PVC wast pipe for sink and wash basin 32mm dia with length not less than 700mm including PVC waste fittings. |
| 136 | Unplasticised PVC Connection pipe with brass union 45 cm long 15 mm nominal bore. |
| 137 | Stainless steel. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm |
| 138 | PVC Cistern internal fittings. |
| 139 | G.I. Pipe 15 mm nominal bore ( B- Class ) |
| 140 | GI nipple 15mm dia upto 100mm long. |
| 141 | GI socket / G.I. elboo size 15mm dia. |
| 142 | CP Brass Pillar Cock |
| 143 | GI Tee 15 dia nominal bore. |
| 144 | GI long screw 15 mm nominal bore. |
| 145 | CP Brass bib-cock Spindle (L&K or eq.) |
| 146 | M.S. clamp 100 mm dia for RWP |
| 147 | PVC tank cover for PVC tank capacity upto 1000 litre |
| 148 | Credit for unservicable Brass/CP Brass Bib Cock, Stop cock, Pillar Cock Gate Valve and other fittings etc. |
| 149 | Credit for Old rusted (unserviceable) C.I./S.C.I. Pipes and fittings, Mild Steel/ Steel Sections, G.I./M.S. Pipes etc. |
| 150 | Credit for using oldservicable bricks obtained from dismantling |
