|
| 1 | Demolishing cement concrete manually/ by mechanical means includingdisposal of material within 50 metres lead as per direction of Engineer -in - charge Nominal concrete 1:4:8 or leaner mix (including equivalentdesign mix) .DSR 2023 15.2.2 (RATE1503.60) |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping groundwithin 50 metres lead.DSR 2023 15.56 (RATE-54.65) |
| 3 | 12 mm cement plaster of mix :1:4 (1 cement: 4 coarse sand) DSR 2023 13.4.1 (RATE-357.35) |
| 4 | Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)Treatment at points of contact of wood work by chemicalemulsion Chlorpyriphos/ Lindane (in oil or kerosene based solution) @ 0.5 litres per hole by drilling 6 mm dia holes at downward angle of 45 degree at 150 mm centre to centre and sealing the same DSR 2023 2.35.5(RATE-279.70) |
| 5 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) 4.1.8 (RATE-6812.00) |
| 6 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources)DSR 2023 5.3 (RATE-11505.50) |
| 7 | 1:2:4(1 CEMENT:2 COARSE SAND (ZONE-III) derived from natural source : 4 graded stone aggregate 20mm nominal size derived from natural source.dsr 2023 4.2.3 (RATE-9895.20) |
| 8 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.DSR 2023 8.31(RATE-1267.95) |
| 9 | PROVIDING AND LAYING hdf WOODEN FLOORING OF 8MM THICKNESS WITH INSULATION COMPLETE IN ALL ASPECTS. (P.S.R) C.B NO.2753/MDA/EECE/M/2023 |
| 10 | PROVIDING AND LAYING hdf WOODEN SKIRTING OF 12 MM THICKNESS WITH INSULATION COMPLETE IN ALL ASPECTS. (P.S.R) C.B NO.2753/MDA/EECE/M/2023 |
| 11 | PROVIDING AND LAYING hdf WOODEN DOOR PROFILE OF 8MM THICKNESS WITH INSULATION COMPLETE IN ALL ASPECTS. (P.S.R) C.B NO.2753/MDA/EECE/M/2023 |
| 12 | Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double acting hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-in-charge DSR 2023 21.18 |
| 13 | Providing and Fixing backlit logo as per drawing, design specification & as per direction of The Engineer in charge. (P.S.R) C.B NO.2706/MDA/2022 |
| 14 | Dismantling aluminium/ Gypsum partitions, doors, windows, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. DSR 2023 15.57 (RATE-56.35) |
| 15 | Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I.wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, theperimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) DSR 2023 12.45.1 (RATE-1355.80) |
| 16 | Providing and Installing high pressure laminated sheet (HPL) of thickness 6 mm on wall & column cladding (P.S.R) C.B NO.2706/MDA/2022 |
| 17 | Providing and Installling new laminate on the already existing conference table include dismantling of existing laminate. (P.S.R) C.B NO.2706/MDA/2022 |
| 18 | Providing and Installing Zebra Blinds as per the directions of engineer in charge. (P.S.R) C.B NO.2706/MDA/2022 |
| 19 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.DSR 2023 13.80(RATE-156.05) |
| 20 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm DSR-13.48.1/2023(RATE-193.70) |
| 21 | Providing and fixing glazing in aluminium door, window, ventilator shuttersand partitions etc. with EPDM rubber / neoprene gasket etc. complete asper the architectural drawings and the directions of engineer-in-charge .(Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not lessthan 10kg/sqm) DSR 2023 21.3.1 (RATE-1176.80) |
| 22 | Providing and fixing in wall lining flat pressed three layer (mediumdensity) particle board or graded wood Pre-laminated one side decorativelamination and other side balancing lamination Grade I, Type II, IS :12823 marked, including priming coat on unexposed arrangement andscrews etc. complete :18 mm thick DSR 2023 8.26.2(RATE-1492.80) |
| 23 | Veneered particle board with commercial veneering on both sides 12mm thick DSR 2023 7468(RATE-510.00) |
| 24 | S.S. (Grade 304) Chairs with leatherette cushioning of high density foam of approved Only godrej make complete in all respect as per directed by The Engineer in charge. (P.S.R) C.B NO.2706/MDA/2022 |
| 25 | A wall fan is an oscillating, wall-mounted air circulator designed for efficient air movement in rooms, offices, or workshops.with a sweep size of 400 mm (16 inches), . having three or five aerodynamically designed blades made from durable ABS plastic or aluminum to ensure strong air delivery and long life, operating on a single-phase 220–240V AC supply at 50 Hz frequency, including automatic oscillation up to 90 degrees and manual tilt adjustment for directional airflow. It provides *three-speed control options—low, medium, and high (which can be operated either by pull cords or through a remote control in advanced models). The body of the wall fan should be made of a powder-coated metal frame and guard, ensuring durability and resistance to corrosion. The motor having copper winding, capacitor start and run type, designed for reliable performance and smooth operation. Wall fans to be made available in any colors such as white, black, grey, and metallic finishes, and from brand havells, crompton,bajaj elecric & usha. as directed by Engineer-in-charge (MR) |
| 26 | supply and installations of daikin 2.00 ton 3 star fixed speed split AC model no. ftl 50 u cost (100% coppper ) om 2.5 air purifine filter all complete . ( P.S.R .NO. 2792/2023) |
| 27 | 4 mm thick ACP DSR 2023 P.NO.27 ITEM NO.2631 (RATE-1134.) |
| 28 | Factory made solid PVC door frame 60 x 30 mm i/c carriage DSR 2023 P.NO.66 ITEM NO.8710(RATE-325) |
| 29 | Cornice With design with PoP (PSR) CB. No-2722/MDA/EE/22 |
| 30 | Neat cement punning. DSR 2023 P.NO 201 S.NO. 13.18 (RATE-79.95) |
| 31 | 5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer’s specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame Decorative type. 9.124.2 P.NO-152 DSR 2023 (RATE-4138.35) |
| 32 | supply and fixing 1.5 mm vinyal plank on floor. (P.S.R) C.B NO.2753/MDA/EECE/M/2023 |
| 33 | Cutting holes of required size in brick masonry wall for fixing of exhaust fanincluding providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-incharge DSR 2023 14.81(RATE-288.10) |
| 34 | Supply and Installation of Exhaust Fan, A standard 300–450 mm wall/ceiling-mounted exhaust fan with metal or plastic body, noiseless blades, protective grill, and 220–240V operation. Brands like Crompton, Usha, Bajaj, and Havells are common as per design / instructions of(MR) |
| 35 | Extra for sunk or raised mouldings in the plaster of Paris (Gypsum anhydrous) ceiling DSR 2023 p.no -189 sr.no 12.32(RATE-607.45) |
| 36 | ELECTRICAL ITEMWiring for light point/ fan point/exhaust fan point/ call bell point with 15 sq.mm FRIS PVC insulated copper conductor single core cable in surface recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required Group DSR 2022 (1.1.1A) |
| 37 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. (P.S.R) C.B NO.2706/MDA/2022 |
| 38 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X 6 sq. mm + 1 X 6 sq. mm earth wire. (P.S.R) C.B NO.2706/MDA/2022 |
| 39 | Supply and fixing of power plug with 20A/250 V flush type modular switch and 5 Pin 20 A/250 Volt flush type universal modular socket switch on concealed M.S. box including supply of all material, labour T & P etc required for proper completion of work. (P.S.R) C.B NO.2706/MDA/2022 |
| 40 | Supplying & Drawing co-axial TV cable RG-6 grade, 0.7 mm. solid copper conductor, PE insulated] shielded with fine finned copper braid and protected with PVC sheath in the existing surface/ recessed steel/PVC conduit as required. For T.V. Socket outlet (P.S.R) C.B NO.2706/MDA/2022 |
| 41 | Providing Drawing Connecting And Testing Of Enhanced Category 4 Pair Lan Local Area Network Cable 24 AWG Conductor Performance Specified 5E U L and CUL Listed In Existing PVC Conduit .(CAT-6 Network Cable) (P.S.R) C.B NO.2706/MDA/2022 |
| 42 | Blank plate for modular plate type switch boards wherever required. (P.S.R) C.B NO.2706/MDA/2022 |
| 43 | Supply & fixing of LED Strip Light all complete as per drawing and specification and direction of engineer incharge. Make-KliteHavells,Philips Equivalent (P.S.R) C.B NO.2706/MDA/2022 |
| 44 | Supply & Fixing of LED Strip Driver all complete as per drawing and specification and direction of engineer incharge. Make-Klite, Havells,Philips (P.S.R) C.B NO.2706/MDA/2022 |
| 45 | Supply & fixing of LED Linear light complete as per design, drawings, specification & as approved by E/I. (P.S.R) C.B NO.2706/MDA/2022 |
| 46 | Supply and Fixing of recess mounting round 12 Watt COB LED Spot Light having Powder coated die cast aluminium housing with heat sink, diffuser/ Reflector and driver set complete in all respect. (P.S.R) C.B NO.2706/MDA/2022 |
| 47 | false ceiling led light 7 watt (MR) as per direction of engineer havells make other ancher make . Please Enable Macros to View BoQ information |
