|
| 1 | CLEANING |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and samplings of girth upto 30cm measured at a height of 1m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared |
| 3 | Felling trees of the girth (measured at a height of 1m above ground level) including cutting of trunks and branches, removing the roots and stacking of serviceable materials and disposal of unserviceable materials |
| 4 | Beyond 30cm girth upto & including 60cm girth |
| 5 | Beyond 60cm girth upto & including 120cm girth |
| 6 | Beyond 120cm girth upto & including 240cm girth |
| 7 | Above 240cm girth |
| 8 | Surface Dressing of the Ground including removing vegetation and inequilities not exceeding 15cm deep and disposal of rubbish, lead upto 50m and lift upto 1.5m |
| 9 | All kinds of soil |
| 10 | EARTHWORK IN EXCAVATION & FILLING |
| 11 | Earth work in excavation by mechanical means/manual means over areas (exceeding 30cm in depth, 1.5m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50m and loft upto 1.5m, as directed by the Engineer-in-Charge |
| 12 | Ordinary Rock |
| 13 | Hard Rock (requiring blasting) |
| 14 | Hard Rock (Blasting prohibited) |
| 15 | Excavation work by mechanical means/manual means in foundation trenches of drains (not exceeding 1.5m in width or 10sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5m including getting out the excavated soil and disposal of surplus excavated soils as directed within a lead of 50m |
| 16 | Ordinary Rock |
| 17 | Hard Rock (Blasting prohibited) |
| 18 | Hard Rock (requiring blasting) |
| 19 | Filling available excavated earth (excluding rock) in trenches, plinths, sides of foundations, etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50m and for all lift |
| 20 | Supplying and filling in plinths with sand underfloors, including watering, ramming, consolidating and dressing complete |
| 21 | CAST-IN-SITU CONCRETE (PLAIN CEMENT CONCRETE) |
| 22 | Providing and laying in position specified grade of plain cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement. |
| 23 | All Work upto Plinth Level |
| 24 | 1:1.5:3 (1 Cement: 1.5 Coarse Sand derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 25 | 1:2:4 (1 Cement: 2 Coarse sand derived from natural sources: 4 graded stone aggregate 20mm nominal size derived from natural sources) |
| 26 | 1:3:6 (1 Cement: 3 Coarse sand derived from natural sources: 6 grade stone aggregate 20mm nominal size derived from natural sources) |
| 27 | All Work above Plnth and upto Floor V Level |
| 28 | 1:1.5:3 (1 Cement: 1.5 Coarse Sand derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 29 | 1:2:4 (1 Cement: 2 Coarse sand derived from natural sources: 4 graded stone aggregate 20mm nominal size derived from natural sources) |
| 30 | 1:3:6 (1 Cement: 3 Coarse sand derived from natural sources: 6 grade stone aggregate 20mm nominal size derived from natural sources) |
| 31 | CENTERING & SHUTTERING (PLAIN CEMENT CONCRETE) |
| 32 | Centreing and Shuttering including strutting, propping, etc. and removal of formwork for |
| 33 | Foundations, Footings, Bases for Columns |
| 34 | Retaining Walls, Return Walls, Walls (any thickness) including attached pilasters, butresses, plinth and string courses fillets, kerbs and steps, etc. |
| 35 | Columns, Pillars, Abutments, Pillars, Posts and Struts |
| 36 | DAMP PROOF COURSE |
| 37 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 Cement: 2 Coarse sand derived from natural sources: 4 graded stone aggregates 12.5mm nominal size derived from natural sources) |
| 38 | Providing and laying damp-proof course 50mm thick with cement concrete 1:2:4 (1 Cement: 2 Coarse sand derived from natural sources: 4 graded stone aggregates 12.5mm nominal size derived from natural sources) |
| 39 | PLINTH PROTECTION WORKS |
| 40 | Making Plinth Protection 50mm thick of cement concrete 1:3:6 (1 Cement: 3 Coartse sand derived from natural sand: 6 graded stone aggregates 20mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling, dressing & finisheing the top smooth |
| 41 | CAST-IN-SITU CONCRETE (REINFORCED CEMENT CONCRETE) |
| 42 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement.All work up to Plinth Level |
| 43 | 1:1.5:3 (1 Cement: 1.5 Coarse Sand derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 44 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement.All work above Plinth Level upto Floor V Level |
| 45 | Reinforcement Cement Concrete Works in Walls (any thickness), including attached pilasters, buttresses, plinth & string courses, fillets, collumns, pillars, piers, abutments, posts & struts, etc. |
| 46 | 1:1.5:3 (1 Cement: 1.5 Coarse Sand derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 47 | Reinforcement Cement Concrete Works in beams, suspended floors, roof, balconies, chajjas, lintels, shelves, bands, staircase, etc. |
| 48 | 1:1.5:3 (1 Cement: 1.5 Coarse Sand derived from natural sources: 3 graded stone aggregate 20mm nominal size derived from natural sources) |
| 49 | CENTERING & SHUTTERING (REINFORCED CEMENT CONCRETE) |
| 50 | Centering & Shuttering including strutting, propping & removal of forms for |
| 51 | Foundations, footings, bases of columns, etc. for mass concrete |
| 52 | Walls (any thickness) including attached pilasters, buttresses, plinth & sytring course, etc. |
| 53 | Suspended floors, roofs, landing, balconies, platform, shelves, etc. |
| 54 | Lintels, beams, plinth beams, girders, cantilevers, etc. |
| 55 | Columns, pillars, piers, abutment, posts, struts, etc. |
| 56 | Staircase except landings |
| 57 | Weather shade, Chajjas, corbels etc., including edges |
| 58 | STEEL FOR REINFORCEMENT |
| 59 | Steel Reinforcement for R. C. C. Work including straightening, cutting, bending, placing in position & binding in all respect |
| 60 | All works upto Plinth Level |
| 61 | Thermo-Mechanically treated bars of Grade Fe-500D or above |
| 62 | All works above Plinth Level & upto Floor V Level |
| 63 | Thermo-Mechanically treated bars of Grade Fe-500D or above |
| 64 | MASONRY WORKS |
| 65 | Brickwork with common brunt clay modular bricks of designation 7.5 in exposed brick work including making horizontal and vertical grooves 10mm wide 12mm deep complete in cement mortar 1:6 (1 cement: 6 Coarse Sand) |
| 66 | Upto Plinth Level |
| 67 | Above Plinth Level upto Floor V Level |
| 68 | Half Brick Masonry with common brunt clay FPS (Non-Modular) bricks of class designation 7.5 in superstructure above plinth level upto Floor V Level |
| 69 | Cement Mortar 1:3 (1 Cement: 3 Coarse Sand) |
| 70 | Cement Mortar 1:4 (1 Cement: 4 Coarse Sand) |
| 71 | Providing and laying Autoclaved Aerated Concrete (AAC) Blocks Masonry 100mm/125mm thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in super structure above plinth level upto Floor V level in 1:4 (! Cement: 4 Coarse sand) cement mortar. This rate includes supply & placement of 2 nos. 6mm MS bars at every 3rd course of masonry works |
| 72 | Randiom rubble masonry with hard stone in cement masonry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 Coarse Sand: 12 Graded Stone aggregate 20mm nominal size) upto plinth level |
| 73 | Cement Mortar 1:6 (1 Cement: 6 Coarse Sand) |
| 74 | PLASTERING/POINTING WORKS |
| 75 | Cement Plaster (Fine Sand) |
| 76 | 12mm Plaster of Mix |
| 77 | 1:4 (1 Cement: 4 Fine Sand) |
| 78 | 1:6 (1 Cement: 6 Fine Sand) |
| 79 | 15mm Plaster of Mix |
| 80 | 1:4 (1 Cement: 4 Fine Sand) |
| 81 | 1:6 (1 Cement: 6 Fine Sand) |
| 82 | Cement Plaster with a floating coat of neat cement |
| 83 | 12mm Plaster finished with a floating coat of neat cement of mix |
| 84 | 1:3 (1 Cement: 3 Fine Sand) |
| 85 | 1:4 (1 Cement: 4 Fine Sand) |
| 86 | 15mm Plaster finished with a floating coat of neat cement of mix |
| 87 | 1:3 (1 Cement: 3 Fine Sand) |
| 88 | 1:4 (1 Cement: 4 Fine Sand) |
| 89 | 6mm Cement Plaster of Mix |
| 90 | 1:3 (1 Cement: 3 Fine Sand) |
| 91 | Neat Cement Punning |
| 92 | Pointing on brick work or brick flooring with cement mortar or mix 1:3 (1 Cement: 3 Fine Sand) |
| 93 | Flush/Rule/Struck or weathered pointing |
| 94 | Raised or cut pointing |
| 95 | PAINTING WORKS |
| 96 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 97 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications |
| 98 | Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqm |
| 99 | Finishing walls with Acrylic Smooth exterior paint of required shade |
| 100 | Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm |
| 101 | Finishing walls with ready mixed Premium acrylic emulsion paint (Company Depot Tinted) having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade with silicon additives. |
| 102 | Two or more coats applied @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm. |
| 103 | Applying Priming Coat |
| 104 | With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works |
| 105 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture |
| 106 | Painting (two or more coats) on rain water, soil waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour over a priming coat of approved steel primer |
| 107 | 100mm diameter Pipes |
| 108 | 150mm diameter Pipes |
| 109 | FLOORING WORKS |
| 110 | Providing and laying rectified Glazed Ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick Cement Mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigments etc., complete. |
| 111 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. |
| 112 | Size of Tile 500 x 500mm |
| 113 | Size of Tile 600 x 600mm |
| 114 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. |
| 115 | Glazed Vitrified tiles Matt/Antiskid finish of size |
| 116 | Size of Tile 600 x 600mm |
| 117 | Marble stone flooring with 18 mm thick marble stone, as per sample of marble approved by Engineer-in-charge, over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with grey cement slurry, including rubbing and polishing complete with |
| 118 | Raj Nagar Plain |
| 119 | Udaipur Green |
| 120 | Tile work in skirting, risers of steps and dado up to 2 m height over 12 mm thick bed of cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry @ 3.3 kg/sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 121 | Marble Tiles (Polished) Raj Nagar8 mm Thick |
| 122 | Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge |
| 123 | Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or Equivalent |
| 124 | CLADDING WORKS |
| 125 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. |
| 126 | Granite stone slab of colour black, Cherry/Ruby red |
| 127 | Area of slab over 0.50 Sqm |
| 128 | Providing edge moulding to 18 mm thick marble stone counters, Vanities etc., including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. |
| 129 | Granite Work |
| 130 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 131 | DOORS & WINDOWS |
| 132 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). |
| 133 | Sal Wood |
| 134 | Kiln seasoned & chemically treated Hollock Wood |
| 135 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. |
| 136 | Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked |
| 137 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. |
| 138 | Fixed to openings /wooden frames with rawl plugs screws etc. |
| 139 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete |
| 140 | 200 x 10 mm |
| 141 | Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete |
| 142 | 300 x 20 x 6 mm |
| 143 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete |
| 144 | 125 mm |
| 145 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineerin-charge |
| 146 | Extruded section profile size 42 x 50 mm |
| 147 | Providing and fixing to existing door frames |
| 148 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multichambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness . The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-incharge. |
| 149 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. |
| 150 | Providing and fixing to existing door frames. |
| 151 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. |
| 152 | Providing and fixing factory made uPVC glazed windows/ventilators comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge |
| 153 | Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body. |
| 154 | Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) (Height upto 1.8m). |
| 155 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge. |
| 156 | With float glass panes of 5.0 mm thickness (weight not less than 12.50 kg/sqm) |
| 157 | CEILING & PARTITION WORKS |
| 158 | Providing & fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanized @ 120 gram per sqm including both sides) comprising of main-T runners of size 15x32 mm of length 3000 mm, cross - T of size 15x32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge. |
| 159 | With semi perforated 12 mm thick micro tegular edged GRG false ceiling tiles. |
| 160 | With fully perforated 12 mm thick micro tegular edged or 10 mm thick square edged GRG false ceiling tiles. |
| 161 | PIPING & SANITARY WORKS |
| 162 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required |
| 163 | W.C. pan with ISI marked white solid plastic seat and lid |
| 164 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 165 | White Vitreous China Wash basin size 630x450 mm with a pair of 15 mm C.P. brass pillar taps |
| 166 | Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required |
| 167 | Kitchen sink with drain board510x1040 mm bowl depth 250 mm |
| 168 | Providing and fixing CP Brass 32 mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. |
| 169 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. |
| 170 | 15mm Nominal dia. |
| 171 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 172 | Flexible Pipe |
| 173 | 32mm dia. |
| 174 | 40mm dia. |
| 175 | Providing and fixing 100 mm sand cast Iron grating for gully trap. |
| 176 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 177 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 178 | Providing & fixing Toilet Paper Holder |
| 179 | C. P. Brass |
| 180 | Providing and fixing soil, waste and vent pipes |
| 181 | 100mm dia. |
| 182 | Sand cast iron S&S pipe as per IS: 1729 |
| 183 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. |
| 184 | For 100mm dia. Pipe |
| 185 | Providing and fixing bend of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete. |
| 186 | 100mm dia. |
| 187 | Sand cast iron S&S as per IS - 1729 |
| 188 | 75mm dia. |
| 189 | Sand cast iron S&S as per IS - 1729 |
| 190 | Providing and fixing plain bend of required degree. |
| 191 | 100mm dia. |
| 192 | Sand cast iron S&S as per IS - 1729 |
| 193 | Providing and fixing double equal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete |
| 194 | 100x100x100x100 mm |
| 195 | Sand cast iron S&S as per IS - 1729 |
| 196 | Providing and fixing double unequal junction of required degree with access door, insertion rubber washer 3 mm thick, bolts and nuts complete : |
| 197 | 100x100x75x75 mm |
| 198 | Sand cast iron S&S as per IS - 1729 |
| 199 | Providing and fixing PTMT Waste Coupling for wash basin and sink, of approved quality and colour. |
| 200 | Waste coupling 38 mm dia of 83 mm length and 77 mm breadth, weighing not less than 60 gms. |
| 201 | Providing and fixing PTMT Bottle Trap for Wash basin and sink. |
| 202 | Bottle trap 31mm single piece moulded with height of 270 mm, effective length of tail pipe 260 mm from the centre of the waste coupling, 77 mm breadth with 25 mm minimum water seal, weighing not less than 260 gms |
| 203 | Providing and fixing PTMT liquid soap container 109 mm wide, 125 mm high and 112 mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality and colour, weighing not less than 105 gms. |
| 204 | Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms. |
| 205 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 206 | 600 mm long towel rail with total length of 645 mm, width 78 mm and effective height of 88 mm, weighing not less than 190 gms. |
| 207 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge: Concealed work, including cutting chases and making good the walls etc. |
| 208 | 32 mm nominal outer dia .Pipes. |
| 209 | Providing and fixing brass bib cock of approved quality |
| 210 | 20 mm nominal bore |
| 211 | Providing and fixing brass stop cock of approved quality |
| 212 | 20 mm nominal bore |
| 213 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 214 | 25 mm nominal bore |
| 215 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 216 | 45 cm length |
| 217 | 20 mm nominal bore |
| 218 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 219 | 150 mm diameter |
| 220 | Providing and fixing rectangular high density polyethylene water storage loft tank with cover, conforming to ISI : 12701, colour of opaque white or as approved by Engineer-in-charge. The rate includesmaking necessary holes for inlet, outlet & over flow pipes. The base support i/c fittings & fixtures for tank shall be paid separately. |
| 221 | Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931: |
| 222 | 15 mm nominal bore. |
| 223 | Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. |
| 224 | 15 mm nominal bore. |
| 225 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. |
| 226 | 15 mm nominal bore |
| 227 | Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. |
| 228 | 15 mm nominal bore. |
| 229 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 : |
| 230 | 15mm nominal bore |
| 231 | Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. |
| 232 | ELECTRICAL WORKS |
| 233 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface/recessed medium class PVC conduit, with modular switch, phenolic laminated sheet, suitable size M.S.box and earthing the point with 1.5 sq.mm.FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 234 | Group C |
| 235 | Wiring for twin control light point with 1.5 sq.mm FRLS/HFFR PVC insulated copper conductor single core cable in surface / recessed medium class PVCconduit, 2 way piano type switch, phenolic laminated sheet, suitable size MS box and earthing the point with 1.5 sq.mm. FRLS/HFFR PVC insulated copper conductor single core cable etc. as required. |
| 236 | Wiring for light/ power plug with 2X4 sq. mmFRLS/HFFR PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit along with 1 No. 4 sq. mm FRLS/HFFR PVC insulated copper conductor single core cable for loop earthing as required. |
| 237 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FRLS/HFFR PVC insulated copper conductor, single core cable in surface/recessed medium class PVC conduit as required. |
| 238 | 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 239 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 240 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 241 | 2 X 6 sq. mm + 1 X 6 sq. mm earth wire |
| 242 | 2 X 10 sq. mm + 1 X 6 sq. mm earth wire |
| 243 | 2 X 16 sq. mm + 1 X 6 sq. mm earth wire |
| 244 | 4 X 6 sq. mm + 2 X 6 sq. mm earth wire |
| 245 | 4 X 10 sq. mm + 2 X 6 sq. mm earth wire |
| 246 | 4 X 16 sq. mm + 2 X 6 sq. mm earth wire |
| 247 | Supplyinganddrawingfollowingpair0.5mmdiaFRLSPVC insulatedannealedcopperconductor,unarmoredtelephone cableintheexistingsurface/recessedsteel/PVCconduitas required. |
| 248 | 1 Pair |
| 249 | Supplyingandfixingoffollowingsizesofsteelconduitalong with accessories insurface/recessincluding painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
| 250 | 20 mm |
| 251 | 25 mm |
| 252 | 32 mm |
| 253 | 40 mm |
| 254 | 50 mm |
| 255 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. |
| 256 | 5/6 A switch |
| 257 | 2 way 5/6 A switch |
| 258 | 15/16 A switch |
| 259 | 3 pin 5/6 A socket outlet |
| 260 | 6 pin 15/16 A socket outlet |
| 261 | Bell push |
| 262 | Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required. |
| 263 | Supplying and fixing modular blanking plate on the existingmodular plate & switch box excluding modular plate as required. |
| 264 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. |
| 265 | 1 or 2 Module (75mmX75mm) |
| 266 | 3 Module (100mmX75mm) |
| 267 | 6 Module (200mmX75mm) |
| 268 | Installation ,Testing, Commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLS/CFL/LED lamps per fitting, complete with all accessories includingconnections etc. as required. |
| 269 | Supplying and fixing call bell/ buzzer suitable for single phase,230 V, complete as required. |
| 270 | Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required. |
| 271 | Upto 450 mm sweep |
| 272 | Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes. |
| 273 | Wiring for group controlled (looped) light point/fan point/ exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed PVC conduit, and earthing the point with 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required. |
| 274 | Group C |
| 275 | Supplying & fixing suitable size GI box wih modular plate and cover in front on surface or in recess including providing and fixing 25 A modular socket outlet and 25 A modular SP MCB, \"C\" curve including connections, painting etc. as required. |
| 276 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminalspreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 277 | 125 A,36KA,FPMCCB |
| 278 | Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 279 | 6 way , Double door |
| 280 | 8 way , Double door |
| 281 | 12 way , Double door |
| 282 | 16 way, Double door |
| 283 | Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 284 | 4 way (4 + 12), Double door |
| 285 | 6 way (4 + 18), Double door |
| 286 | 8 way (4 + 24), Double door |
| 287 | Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) |
| 288 | 4 way (4 + 12), Double door |
| 289 | 8 way (4 + 24), Double door |
| 290 | 12 way (4 + 36), Double door |
| 291 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 292 | Single pole |
| 293 | Double pole |
| 294 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 295 | Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
| 296 | 40 A |
| 297 | 63 A |
| 298 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. asrequired. |
| 299 | 40 A |
| 300 | 63 A |
| 301 | Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts, residual current circuit breaker (RCCB),having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. asrequired. |
| 302 | 40 A |
| 303 | 63 A |
| 304 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V \"C\" curve DP MCB complete with connections, testing and commissioning etc. as required. |
| 305 | Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioningetc. as required. |
| 306 | Supplying and fixing 20 A, 415 V, TPN Industrial type socket outlet, with 4 pole and earth, metal enclosed plug top alongwith 20 A \"C\" curve, TPMCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required. |
| 307 | Providing and fixing M.V. danger notice plate of 200 mm X 150 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 308 | Providing and fixing H.T. danger notice plate of 250 mm X 200 mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
| 309 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 310 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 311 | Earthing with copper earth plate 600 mm X 600 mm X 3 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 312 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 313 | Supplying and laying 25 mm X 5 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm) |
| 314 | Providing and fixing earth bus of 50 mm X 5 mm copper strip onsurface for connections etc. as required. |
| 315 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required. |
| 316 | Fixing of lightning conductor finial (single prong) with base plateincluding holes etc. complete as required. |
| 317 | Jointing copper / G.I. tape (with another copper/ G I tape, base of the finial or any other metallic object) by riveting / nut bolting/ sweating and soldering etc as required. |
| 318 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
| 319 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
| 320 | Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required. |
| 321 | Providing and laying G.I. tape 32 mm X 6 mm from earth electrode directly in ground as required. |
