|
| 1 | Dismantling offloor, hearth or wall tilling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed |
| 2 | M&LVitrified Ceramic light shade tiles 9 to 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match flooring( in any pattern) andjointedwith coloured cement matching with surfaces of tiles as in floor 15 mm thickcement screed in CM 1:6 and pointed with coloured cement matching with surfaces of tiles as in floor complete all as specified and directed |
| 3 | All as per Sl item No.2 above but for vertical surfaces such as skirting, dados and riser to steps over 10mm thick backing coat in cementplaster 1:3 finished even and fair to receive tiles.complete all as specified and directed |
| 4 | M&L for Coloured printedNon Skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors over 15mm thick sement screed in CM 1:4 etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed (colour & design approved by Engr -in-Charge). |
| 5 | M&L forColoured printedGlazed ceramic tiles on vertical surface 350 x 250 x 7 mm/450 x 350 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the colour of tiles over 10mm plaster in CM 1:3 complete all as specified and as directed (colour & design approved byEngr -in-Charge). |
| 6 | M & L preparation of old painted surfaces of walls, any descriptions over 10cm girth or width, not otherwise described and applying one coat of plastic emulsion complete all as specified and directed |
| 7 | M&L for Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, complete all as specified and directed |
| 8 | Taking down and removing to or from stores Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame) and removing, complete all as specified and directed |
| 9 | S&F Aluminium anodizedpowder coated sliding windows ofthree track system and provn of alu shutters (glazed and gauzed) sliding type made out of standard aluminium section and glazing with 5.50mm thickand stainless steel wire cloth of 0.36mm nominal dia of wire and average width of apperture 1.40mm complete including necessary accessories, complete all as specified and directed and as shown in Drawing No.CECZ TD/804 Sheet No. 1/3 to 3/3 dated 13-08-2021 |
| 10 | S & F aluminium deko grill with side beading for existing aluminium door & windows of selectedsize, shapes and pattern, section size of grill not less than 5mm thickness all as per manufactures instruction and directed by Engr-in-Charge. |
| 11 | S & F powder coated (minimum thickness of powder coating 50 micron) aluminium anodised frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing, etc complete all as specified and directed. |
| 12 | S&F 4 mm thick sheet glass, ordinary quality, and sheet glass is ground or obscured or frosted on one side fixed in aluminium door/window/ventilator glazing with rubber beading complete all as specified and directed. |
| 13 | S & F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of apreture 1.00 mm & fixed with stainless steel wire, staples all as specified and directed. |
| 14 | Dismantling Stone slabs and tiles of any description or thickness in floors,plinth protection, aprons etc Laid, bed-ded and pointed in any mortar,complete all as specified and as directed. |
| 15 | M&L 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 16 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed. |
| 17 | Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames) and removingcomplete all as specified and directed |
| 18 | S&F PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube suppling fixing in opening etc. |
| 19 | S & F Factory Made Solid PVC Moulded Door Shutter with particle board core, 28 to 30mm thick(stiles), with 2, 4, or 6 raised panel design with 2mm thickMoulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification& drawing . |
| 20 | S&F 100 mm Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 and fixed to PVC Doors complete all as specified and as directed. |
| 21 | S&F 125 mm long aluminium anodised barrel tower bolt of extruded section and fixed complete all as specified and as directed. |
| 22 | S&F 125 mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed. |
| 23 | M&L for 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing, complete all as specified and directed |
| 24 | Providing & fixing false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG ( Glass Fiber reinforced Gypsum) false ceilingtiles of Size 595 x 595 mm of approved texture, design and pattrens having moisture content less than 2%, humidity resistenceof 99% NRCO 50 to 75 as per IS 8225:1987, Noncombustable as per BS 476 (Part 4)-1970 and height refelectence of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 033 mm thick( galvanized)at the rate of 120 grames per sqm including both sides)compraing of maint runners of size 15 x 32 mm of lenth 3000 mm, cross-T of size 15 x 32 mm of length 1200mm and secondary intermeditate cross-T of 15 x 32 mm of length 600mm to from grid module of of length 600 x 600mm, suspended fromceiling using galvanized mild steel items ( glavanizing @ 80 grams per sqm) i.e 50 mm long, 8mm outer diameter M-6 dash fasterners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85 x25x2mm Galvanized iron perimeter wall angle of size 24x24x0.40mm og length 3000mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 45 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawinig and as per directions of the Engineer-in charge. |
| 25 | Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlarfacings, dressed stonework and precast concrete articles, complete all as specified and directed |
| 26 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6 M mean radius built in CM 1:6 complete all as specified and directed. |
| 27 | Taking down cement plaster of any description on bricks, stone walls etc including raking out joints, hacking for key, scrubbing down with water etc. to receive new plaster on old walls. |
| 28 | Material and Labour 10mm thick rendering in cement mortar 1:4 on brick or concrete surface for fixing of vertical tiles complete all as specified and directed. |
| 29 | M&L for Glazed ceramic coloured tiles including border tiles in vertical surface 450 x 350 x 7mm thick and set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed. |
| 30 | Material and Labour for preparation of old plastered / decorated surfaces of walls and applying one coat of white wash complete all as specified and directed. |
| 31 | S&F of factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of M.S tubes for top and bottom rails. M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel moulded plain colour PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying and fixing in the frame at site as per specification and drawing. |
| 32 | S & F 150 mm Aluminium anodized, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 33 | S & F 250mm long Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and directed. |
| 34 | Supply and Fixing in repairs PVC valveless, symphonic action type flushing cistern, 10 ltrs, low level, white, with inlet, ball valve, float and handle including brackets and PVC connection complete all as specified and directed.. |
| 35 | Supply and Fixing in repairs vitreous china squatting pan “Orissa’ pattern size 580 x 440 mm white with integral foot rests including provision of lime concrete bed and taking out the existing one Make Cera or equivalent complete all as specified and directed (Colour and size all as approved by Engr-in-Charge) |
| 36 | S & F in repair Bowl for Extended Wall Hung WC with PP soft close seat cover, Hinges, Accessories Set, Size:370 x 650 x 765 mm Make CERA Cat No S1012314and cistern fittings suitable for the same or equivalent complete all as specified and directed(Colour and size all as approved by Engr-in-Charge) |
| 37 | S&F in repair cistern with cistern fittings make Hind ware Cat No : 521937 Equivalent complete all as specified and directed by Engr-in-charge (colour and size all as approved by Engr-in-Charge) |
| 38 | Taking up or down 15 mm bore steel tubing and connections, complete all as specified and directed |
| 39 | Taking up or down 25 mm bore steel tubing and connections, complete all as specified and directed |
| 40 | S & F 20mm boreCPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete including required Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 for concealed water tubing and making good cutting exc 10 cm but not exc 20cm girth complete all as specified and directed. |
| 41 | S & F 20mm bore brass elbow complete all as specified and directed. |
| 42 | S & F 15mm bore brass elbow complete all as specified and directed. |
| 43 | S & F 20mm bore brass tee complete all as specified and directed. |
| 44 | S & F 25mm bore brass threadless CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceiling or laying in floors complete to walls and ceilings or laid in floors all as specified and as directed. |
| 45 | S & F in repair 15mm dia fancy type chromium plated bib taps straight line model with wall flange complete all as specified and directed. Make CERA Cat No : F2002152 or equivalent. |
| 46 | S & F in repair 15mm dia fancy type chromium plated 2-in-1bib taps straight line model with wall flange complete all as specified and directed. Make CERA Cat No : F2002161 or equivalent. |
| 47 | S & F in repair Pillar cock, 15mm dia cast copper alloy, chromium plated fancy type complete all as specified and directed. Make : CERA Cat no F2002103 or equivalent. |
| 48 | S & F in repair angular stop cock with flange,15mm dia cast copper alloy, chromium plated fancy type Make : CERA Cat No : F2002211 or equivalent. |
| 49 | S & F in repairs vitreous china bowl urinal all fittings except stopcock of make: CERA Cat no S4020113 Urinal, Size : 30.5 x 38 x 65mm and Fixing Accessories Set or equivalent (Colour and size all as approved by Engr-in-Charge) complete all as specified. |
| 50 | S & F of PVC waste pipe connections of 40 mm for urinal, complete all as specified and directed |
| 51 | S & F in repairs Wash Hand basins, wall hung with fixing assys Size : 565 x 440 x 210mm Make : Model No.CERA S2020168 withor equivalent all as specified and as directed |
| 52 | S & F for waste coupling stainless steel 32 mm Make : Jaguar model No ALD-CHR-709 or equivalent all as specified and directed |
| 53 | S & F for PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 54 | S & F for PVC waste pipe connections of 32mm for WHB complete all as specified and directed. |
| 55 | S & F 600 x 450 mm beveled edge mirror of selected quality glass, mounted on 6mm thick AC building board commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 56 | M&L PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 57 | S&F CP tubular towel rail, 20mm dia 60 cm long with between flanges complete all as specified and directed. |
| 58 | S&F CP toilet paper holder with cover, brass, chromium plated 150mm size, complete all as specified and directed. CERA Cat No ; F5014109CH |
| 59 | S&F CP brass chromium plated towel ring , complete all as specified and directed.CERACat no : F5013115CH |
| 60 | S & F Chromium plated soap dish fixed to walls with chromium plated brass screws in bath rooms and for wash hand basins complete all as specified and directed. CERA Cat no : F5013116CH |
| 61 | S & F for SWR pipe, sand cast type in any length with and without ear with cement joints laid in floor or in wall clamps, 110 mm bore of pipe complete all as specified and directed including dismantling of old pipes. |
| 62 | S & F for SWR, bends (any radius) diminishing and tapers (large bore to be measured ) with oval access door fitted to 110 mm bore of pipe complete all as specified and directed. |
| 63 | S & F for 110mm dia bore PVC (SWR) vent cowl, complete all as specified and directed. |
| 64 | S & F of 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed in rising complete all as specified and directed. |
| 65 | S & F Factory made fully glazed panel UPVC ventilator/ window shutter with 4mm thick figured glass alongwith frame and all necessary fittings, all of standard dimension complete all as specified and directed. |
| 66 | Supply and fixing of factory made uPVC white colour fixed window made of extrudedprofiles with wall thickness of 2.3mm (+/0.2mm). Window profile with hollow section with multi chamber, frame (60mmx58mm),T profile (One vertical length in between two shutters) (60mmx74mm) Glazing bead(35x20mm) will be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware and drianage of water etc. making arrangement for fixing of hardware EPDM gasket 1.2 + -0.2 mm thick galvanised steel frame (28mmx21.5mm) \"T\" profile (27mmx17mm) to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fastners.5mm thick glazing with selected quality glass. (Note : The unit rate quoated by contractor excludes cost of glass and includes all other connected accessories. Net opening will be meausered for payment purpose) (A) Area n.exc. 1.00 Sqm each |
| 67 | S&F 5.00mm thick tinted glass fixed with & incl PVC/neoprene gasket, angular glazing alu beads, rubber packing locking arrangement for sliding windows/door complete all as specifed and directed. |
| 68 | S&Fin repair stainless steel curtain rod 20 mm dia including set of brackets (side/corner) for exc.1.0m and n.exc 1.5 m,taking off the old articles (Pelmets/wooden/arrangement of curtain), plugging up new key holes, making good the dusturbed surface and painting one coat on disturbed surface as required complete |
| 69 | M&L for complete removal of existing treatment and applying two coats oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and directed. |
| 70 | Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed. |
| 71 | Taking downexisting sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces ofwalls, floors etc. |
| 72 | M & L for providing point wiring with 1.5 sq. mm (nominal area) single core PVC insulated FRLS unsheathed multi-stranded copper conductor cable (maintaining colour code), 1100 volts grade in and includingnon metalic rigid PVC conduit medium grade with appropriate size with all fittings (ISI Marked) suitable for concealed wiringon stone/brick, masonary walls, roof etcincluding modular sunken box of adequate size with suitable modular plate cover for mounting modular switches, sockets, regulators, light fittings etc. complete with all fittings and accessories fixed to wall/ ceiling for one light/ fan /bell point controlled by one oneway modular switches including one run 1.5 sqmm (nominal area) PVC insulated FRLS unsheathed multi-stranded copper conductor cable green in colour for earth continuity conductor connected to common earth dolly including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified & directed at site. |
| 73 | All as per Item No.72 abovebut one 5 Amps 3/5 pin modular socket outlet on independent board complete all as specified and as directed at site. |
| 74 | All as per Item No.72 above but for one 3/5 pin 5/6 Amps modular socket outlet point on same board with other switches complete all as specified and as directed at site. |
| 75 | All as per Item No.72 but for One 3 pin 15 / 16 Amps modular switch socket outlet point on independent board with 2.5 sqmmPVC (FRLS) insulatedunsheathed copper conductor single core multi stand flexible cable and 2.5 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed at site. |
| 76 | S&F in repair Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed at site. |
| 77 | S&F in repair Modular switch, single pole, one way, 6Amps one module complete all as specified and as directed. |
| 78 | S&F in repair Modular 6A 3 pin universal socket outlet, 2 module complete all as specified and as directed. |
| 79 | S&F in repair Modular switch, single pole, one way, 16Amps one module complete all as specified and as directed. |
| 80 | S&F in repair Modular socket outlet 2-in-1, 6/16 Amps, 2 module complete all as specified and as directed. |
| 81 | S&F in repair modular stepped type electronic fan regulator 220 volts, 100Wattcomplete all as specified and as directed. |
| 82 | S&F in repair Factory made board distribution in sheet steel enclosure vertical single door with 200 Amps ratedbus bar, TPN, 4 ways, 240 Volts suitable for housing MCBsas incomer and SP MCBsas outgoing complete all as specified and as directed. |
| 83 | S&F in repair Sheet metal enclosure MCB distribution board including 200 Ampsbus-bar single pole and neutral 240V, 8 Ways, double door including taking down of existing sheet metal enclosure complete all as specified and directed at site. |
| 84 | S&F in repair MCB,Four pole,240 volts, 63 Amps 10 KA C curve complete all as specified and as directed. |
| 85 | S&F in repair 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of SPN and current carrying capacity 32 AMP, in the MCB DB Complete with connection testing and commissioning. |
| 86 | S&F in repair 240V, 10 KA \"C\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 5 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed at site. . |
| 87 | M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 4 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site. |
| 88 | M&L for Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 6.0 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 6.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site. |
| 89 | M&L for Submain wiring with four single core PVC (FRLS) insulated flexible copper conductor cable of size 10.0 Sqmm and two single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 10.0 Sqmm as earth lead in and including PVC conduit medium grade/casing caping with all fittings suitable for concealed/surface type and making good the disturbed wall surfaces to match with existing specification all as required at site complete all as specified and directed at site. |
| 90 | Supply & fix in repair LED down lighter 2\"x2\" , 36 Wenvironmental friendly, new generation,aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source, suitable for Armstrong/Grid ceiling complete all as specified and directed.Make : Havells Cat No. VENUSTREND2X2PLR36WLED857SWH or approved equivalent make. |
| 91 | Earthing complete with galvanized steelearth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed by the Engr-in-charge. |
| 92 | S&F 40 W surface mounted decorative LED batten with aluminium housing and integrated electronic diriver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose with THD <10% complete all as specified and directed at site.Make : Havells Cat No. STOUTPLUS1200BS40WLED857SPCWH or approved equivalent make. |
| 93 | S&F 10 W decorative surface mounted LED batten with aluminium housing and integrated electronic diriver connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed at site.Make : Havells / Bajaj / Crompton Greaves |
| 94 | S&F Floretine Decorative, wall mounting, brushed nickel finish fixture with Opal Glass diffuser suitable with 9 W LED lamp B22 base. complete all as specified and directed at site. Make : Havells / Bajaj / Crompton Greaves |
| 95 | S&F in repair single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole 20 Amps MCB complete all as specifed and directed at site. |
| 96 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1400 mm sweep. Min air delivery 245 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). |
