|
| 1 | Demolition of cement concrete unreinforced in ground floor and pavings not exceeding 15cm thickness below or above ground level andremovingmaterial from site complete all as specified and directed. |
| 2 | Taking down cement plaster from brick walls masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed. |
| 3 | M&L for Brick work with subclass \"B\" bricks, old size bricks, straight or curved onplan exceeding 6 metre mean radius built in cement mortar (1:6) complete all as specified and directed. |
| 4 | M&L Brick work using old size bricks with sub class \"B\" bricks straightor curved on plan to any radius in half brick thick walls built in cement mortar (1:4) complete all as specified and directed. |
| 5 | Taking down chowkats or frames areanot exceeding 1.50 Sqm(w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed.Note : The quoted rate shall deemed to be include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid. |
| 6 | Taking down chowkats or frames area exceeding 1.50 Sqm andnot exceeding 4.00 Sqm (w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC (1:2:4) type B1, complete all as specified and as directed.Note:– The qouted rate shall deemed to be include for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid. |
| 7 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 8 | M&L for Vitrified digital double charge light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles exc. 0.34 sqm & not exc. 0.72 sqm, in floors etc. set and jointed in cement mortar 1:6 and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer with CM (1:4) complete all as specified and directed. |
| 9 | All as per above but in skirting to walls including 10mm thick cement plaster in CM (1:4) as backing coat on fair faces on stone surface complete all as specified and directed. |
| 10 | M&L for coloured Glazed ceramic tiles light coloured tiles 8-9 mm thick ( square or rectangular) polished, area of each tiles exc. 0.40 sqm & not exc. 0.72 sqm,in vertical surface set and jointed in neat cement slurry and pointed in white or colour cement to matchincluding 10mm thick cement plaster in CM (1:4) as backing coat on fair faces on stone surface complete all as specified and directed. |
| 11 | M&L for Jet south black granite slab work 18 to 20mm thick (table rubbed and polished) in cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of following types and including 15mm thick screed bed in CM (1:6)set and jointed in neat cement slurry and pointed in coloured cement to match the surfaces and half nose moulding (bull nosing) etc, complete all as specified and directed. |
| 12 | M&L for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window & otherFrames/ Chowkhat of size 75x50 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calciumcarbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity indexof 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threadedstar headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) &1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spreadof flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete all as specified and directed. |
| 13 | S&F in replacement factory made WPC single extruded 100% lead free ISO certified board of 18mm thick pre laminated both side, shutter for kitchen cabinet and cupboard. The laminated shutter should be .12 microne pre laminated side with different design and other side plain white of density not less than 650 kg / cum manufactured by an ISO 9001:2015 certified company.The 18mm board should be 100% lead free, water proof, termite proof and borer proof and should have good screw holding capacity complete all as specified and directed. |
| 14 | S&F in replacement factory made UPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47mm x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of UPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 mm x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion if required shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc after fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality complete as per approved drawing & direction. (Glass shall be measured and paid separately under relevant items of schedule given here-in-after. |
| 15 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116mm x 45 mm & sash 46mm x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of UPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100mm x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed (Glass or wiremesh shall be measured and paid separately under relevent of item of Sch \"A\" given here-in-after. |
| 16 | Supply and fixing factory made UPVC white colour Casement door with 3D hinges made of (big series) frame 67mm x 64 mm & sash 67mm x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm comprising of UPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), UPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100mm x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc.etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed (Glass shall be as above. |
| 17 | S&F factory made UPVC door frame made of UPVC. extruded sections having an overall dimension (extruded section profile 48mm x40 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified and directed. |
| 18 | S&F 5.50 mm thicksheet glass, ordinary quality plain or tinted and glazing with rubber gasket in square exceeding 0.5 Sqm in each pane, complete all as specified and directed. |
| 19 | M&L for 15mm thick rendering in cement mortar (1:6) onbrick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified and directed. |
| 20 | Dismantling of wall and ceiling boards, any thickness including cover fillets complete all as specified and directed. |
| 21 | M&L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. complete all as specified and directed. |
| 22 | M&L for hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40mm x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and directed. |
| 23 | M&L for Non asbestos fibre cement building boards 4 mm thick laid GI/Aluminium framework with screw complete all as specified and directed. |
| 24 | Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm fixed with stainless steel wire staple orfixing with beads to wooden joinery when fixed in panels of joinery, complete all as specified and directed. |
| 25 | Supply & fixing in repairs stainless steel type curtain rod 22 to 25mm dia as per sample including brackets & finials etc.complete all as specified and directed. |
| 26 | S&F in repair 20 mm bore steel tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length complete all as specified and directed. |
| 27 | Supplying and laying of 15 mm dia CPVC pipes SDR 11 and with all reqd fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 28 | S&F for bevelled edge mirror of selected quality glass rectangular, area exc. 1 sqm and not exc. 1.5 sqm each 5 mm thickmounted on 6mm thick AC building board or commercial plywood or 5 mm thick pvc sheet and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 29 | M&L for complete removal of existing treatment of walls, roof projection, fins and fascia etc. with wire brush or any manul other mechanical method by manual and reaching upto old plastered surface complete all as specified and directed. |
| 30 | M&L for applying 1 mmthick wall care white putty in two layers on walls complete all as specified and directed. |
| 31 | M &L for preparation of newly putty surfaces of finishing walls with paint of required shade applying two or more coats of 100% Premium acrylic interior emulsion paint of having VOC less than 50 gm/litre and UV resistace as per IS 15489:2004. Alkali & Fungal resistance, dirt resistance interior paint of required shade (Company Depot tinted) with silicon additives @1.43 ltr/ 10 sqm over and including priming coat of interior primer applied @ 0.90 ltr/ 10 sqm on putty surfaces complete all as specified and directed. Note:Emulsion to be carried out through air less spray machine Mechanical Means Make:- Asian Paint Apcolite Premium Emulsion/Berger Easy Clean/Nerolac Impression Emulsion. |
| 32 | Dismantling of cast iron or reinforced concrete drain pipes, jointed in cement mortarand taking out complete all as specified and directed. |
| 33 | S&F for 100 mm bore cast iron spun pipe in any length including jointing with cement joint fixed to wall complete all as specified and directed. |
| 34 | Supply & Fixed for 75 mm bore cast iron spun pipe in any length including jointing with lead joint on wall/flooring complete all as specified and directed. |
| 35 | Supply & Fixed cast iron spun Bends (any radius) size 100mm bore complete all as specified and directed. |
| 36 | Supply & Fixed cast iron spun Bends (any radius) size 75 mm bore complete all as specified and directed. |
| 37 | M&L in repairs 75mm dia cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate complete all as specified and directed. |
| 38 | S&F in repair 15mm bore bib tap two way cast copper alloy CP with crutch or butterfly handles screwed down for iron pipes or for brass ferrule all as specified and directed. Make: Jaquar/Kohler/Grohe. |
| 39 | S&F in repair chromium plated mixer for wash hand basin for mixing hot and cold water screwed down for iron pipes suitable for 15mm bore pipe complete all as specified. Make: Jaquar/Kohler/Grohe |
| 40 | S&F in repair 15mm bore angle valves/stop valves cast copper alloy screwed down high pressure with crutch or butter fly handles screwed both ends for iron pipe or for unioncomplete all as specified and dircted. Make: Jaquar/Kohler/Grohe. |
| 41 | Supply & fixed in repair vitreous china wash hand basin table top white of size 480 mm x 480 mm with32 mm dia chromium plated waste coupling including flush pipe etc complete all as specified and directed.Make: Jaquar/Kohler/Grohe. |
| 42 | Supply and fixed in repair , vitreous ChinaSingle piece with UF soft close seat cover, Hinges, fixing Accessories, Accessories Set and Cistern fittingswith ‘P’ or ’S’ trap complete all as specified and directed.Make: Jaquar/Kohler/Grohe |
| 43 | S & F health faucet (hand shower) (ABS body) 80mm round shapewith 1.2 mtr long flexible tube and wall hook etc complete all as specified & directed. Make: Jaquar/Kohler/Grohe |
| 44 | S&F in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges all as specified and directed. Make: Jaquar/Kohler/Grohe |
| 45 | S&F in repair brass chromium plated soap tray/dish fixed with CP screws etc complete all as specified and directed. Make: Jaquar/Kohler/Grohe. |
| 46 | S&F in repair brass chromium platedTumbler holder fixed with CP screws etc complete all as specified and directed.Make: Jaquar/Kohler/Grohe |
| 47 | S&F in repair toilet paper holder of brass chromium plated fixed to walls with chromium plated (CP) brass screws etc. complete all as specified and directed. Make: Jaquar/Kohler/Grohe. |
| 48 | S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.Make:Coronet/Cera/plumber. |
| 49 | S&F Corner glass shelfwith bracket and glass complete set etc complete all as specified and directed.Make: Jaquar/Kohler/Grohe. |
| 50 | S&F in repair brass chromium plated tubular towel rack with tower hanger (Stainless Steel) with hook.complete all as specified and directed. Make: Jaquar/Kohler/Grohe. |
| 51 | S&F in repair brass chromium plated double coat hook. Make: Jaquar/Kohler/Grohe. |
| 52 | S&F Antique zinc finish metal door handles size 150 mm, polished bright complete all as specified and directed. |
| 53 | S&F Antique zinc finish metal barrel tower bolts size 200mm with cast or sheet barrel and rolled or cast boltscomplete all as specified and directed. |
| 54 | S&F in repairmagnetic ball catches with 8mm dia steel ball brass body and striking plate including letting in and fixed, overall length of cover plate 140mm longcomplete all as specified and directed. |
| 55 | Supply & fixing self closing/auto Casement type hinges 90/180 degree. Make: Haffle/ Dorma/Hettich |
| 56 | S&F in repair 50mm bore LDPE (Low density Polyethylene Pipes) of pressure rating 6Kgf/Sqcm fixed complete to walls,ceilings or in floorsincluding taking down of old GI tubing, 40 mm bore complete all as specified and directed. |
| 57 | M&L for providing reinforced cement concrete (1:2 :4) type B1 using 20mm graded stone aggregate as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified and directed. |
| 58 | M&L for mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed. |
| 59 | S&Lin repairs stainless steel grating openable 100mm dia without hole including fixing with white cement complete all as specified and directed. |
| 60 | Taking down copper/aluminium point wiring for (light, fan, socket or power) complete including unserviceable fittings such as switches, ceiling rose, holders, sockets,light fittingsetc. and making good the disturbed surfaces on wall/floor etc complete all as specified and directed.Note- (i) Dismantled serviceable light fitting shoud be kept in safe custodyfor reuse.(ii) Refixing of serviceable fitting shall be paid seperately under relevant items of Sch \"A\" given here-in-after. |
| 61 | Taking down old and unserviceable sub main wiring any size/type /core incl earth wire complete with batten conduit etc complete all as specified and directed. |
| 62 | Taking down old and unserviceable sheet metal enclousure ,switch fuse unit,distribution board any type/way/capacity including fuses mcbs ,insulator rccbs etc copmlete after removing all connectionand making good the disturbed surface complete all as specified and directed. |
| 63 | M&L for point wiring with two single core PVC insulated & PVC unsheathed FRLS-H multistranded copper conductor cable of size 1.5 sqmm 1100 volt gradein non metallic rigid PVC concelled conduit medium grade 25 mm dia with all accessories mounting all the surface of wall/ceiling/roof/etc with suitable size of module metal flush boxes and including modular front coverplate & back plate for mounting modular type switches /socket/fan/ regulator etcincluding provision of one single corePVC insulated and unsheathed multi stranded copper cable of size 1.5 sqmm 1100 volt grade as earth continuty conductor connected to common earth dollyswitch board complete for following-Make of Cable- Plaza/Finolex/Havells/Polycab Make of Conduit- AKG/ Plaza/ Jindal / FinolexOne light/fan point controlled by one switch SP 5 Amps 240 V |
| 64 | Ditto all as per item No 63above but for one 3 pin 5 amps switch socket outlet point on independent board |
| 65 | Ditto all as per item No 63above but for one 3 pin 5 amps socket point on same board |
| 66 | Ditto all as per the item No 63 herein before but with 2.5 sqmm conductor for5 pin 15 Amps switch socket outlet. |
| 67 | S&F switch modular type 1 module single pole, one way 5 Amps.Make - Goldmedal/cabtree(havells)/ABB |
| 68 | S&F switch modular type 1 module single pole, one way 15 Amps.Make - Goldmedal/cabtree(havells)/ABB |
| 69 | S&Fsocket outlet 2 in 1, 5 pin, 15Amps modular type 2 module Make - Goldmedal/cabtree(havells)/ABB |
| 70 | S&F socket outlet 5Amps modular type 2 moduleMake - Goldmedal/cabtree(havells)/ABB |
| 71 | M&L ceiling rose,PVC/polycarbonate, isolated body |
| 72 | S&F Submain wiring with two single core PVCinsulated FRLS multistrand copper conductor cable of size 10Sq mmdrawn into and including non metallic heavy duty rigid concealedPVCcondute not less than 25mm size ISI marked ivory colour (Pressfit or similar brand ) with allfittings / accessories and 10Sq mm FRLS multistrand copper conductorcable as continuous earth wire complete all as specified and directed. Note:- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesis deemed to be included in the unit rate quoted for this item.Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex |
| 73 | S&F Submain wiring with two single core PVCinsulated FRLS-H multistrand copper conductor cable of size 04 Sq mmdrawn into and including non metallic medium duty rigid concealedPVCcondute not less than 25mm size ISI markedwith allfittings / accessories and 04 Sq mm FRLS-H multistrand copper conductorcable as continuous earth wire complete all as specified and directed. Make- Polycab/Havells/RR kables/plaza. Note :- for submain wiring: Two run of single core cable and one run of earth wire will be measured as one lengthandconduit and its accessoriesis deemed to be included in the unit rate quoted for this item.Make- Polycab/Havells/RR kables/plaza. Make of PVC conduit :- AKG/ Plaza/ Jindal / Finolex |
| 74 | S&F Sheet metal enclosure 12 way double door distribution board when MCB to be used SPN 240 volt sheet complete all as specified and directed. Make :- Havells / Legrand /Seimens/ L&T. |
| 75 | S&FMCB SPN 40 to 63 Amps 240 volt,50 hz,10 KA breaking capacity :C\" curved type complete all as specified and directed. Make :- Havells / Legrand /Seimens / L&T. |
| 76 | S&F MCBsingle pole, 6 to 32Amps, 240 Volts 50 HZ, 10 KA breaking capacity complete all as directed.Make :- Havells / Legrand /Seimens / L&T. |
| 77 | S&F socket outlet 5 pin 20 amp modular type 2 module with suitable size of module metal flux boxes and including modular front cover plate and back plate for mounting modular type switch & socket with one single poleone module MCB of 20 amp including electrical connection complete all as specified and directed.Make- Havells/ABB/Legrand/L&T. |
| 78 | Supply and Fixing in repair wall/surface mountingluminaires integrated LED Batten18/20 W, 6500/4000 K,100 lumens/watt , 230V with extruded Aluminium housing4 feet long with frosted PMMA/PC diffuser & integrated electronic driver, 25k burning hours ,2.5 KV surge protectioncomplete including Electrical connection with PVC three core copper flexible wire & all necessary fixing arrangementscomplete all as specified and directed. Make - Phillips/Havells/Bajaj/ CG. |
| 79 | S&F in repairsquare recessed / surface/suspendedmounting LED ceiling light with extruded aluminium housing and milky diffuser of 36 W 2\"X 2\"panel complete with LED driver 240 V ,50 Hz,3600 lumen 6500 k complete all as specified and directed. Make - Phillips/Havells/Bajaj/ CG |
| 80 | S&F in repair exhaust fan made of sturdy engineering plastic body complete with louvers shutter volt 230 V 50 Hz RPM 1200 copper winding of sweep 250 mm. complete all as specified and directed. Make-Havells/Philips/crompton/Bajaj/CG |
| 81 | S&F in repair Batten holder backlite with 1x9 watt LED bulb includig all fixing accessories and making connection with copper conductor complete all as specified and directed. |
| 82 | M&L for Sleek LED mirror light 10 watt rating with diffuser 2ft long twisted flexible copper wire approx 0.5 mtr long complete all as specified and directed. Make - Phillips/Havells/Bajaj/CG. |
