|
| 1 | Providing and Fixing Cushion Vinyl/Fully flexible Vinyl Flooring confirming to I.S.-3462 Flooring of approved make with fibre base using rubber base adhesives including rolling with light wooden roller complete 2.0 mm thick |
| 2 | ईंटो की दीवार को तोड़ना, अ छी ईंटों का च ा बनाना तथा काम म न आने वाली साम ी को 50 मीटर की दूरी तक फकना। |
| 3 | ताक हेतु मशीन से सिरे काटे हुये समान रंग के पॉलिश कोटा स्टोन की 25-40 एमएम मोटाई में आपूर्ति, सीमेन्ट मसाला 1:3 में लगाना सहित पूर्ण कार्य |
| 4 | Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete |
| 5 | Providingand fixingGranite stone slabmirror polishedand machine edge cut in walls, pillars, steps, Shelves, Sills Counters,Floorsetc. laidon12mm(Av.)thickbaseofcement mortar 1:3 (1 cement : 3 coarse sand) jointingwithwhite cement mortar 1:2 (1white cement : 2marble dust) with pigment tomatch the shade of themarble slab including grinding, rubbing and polishing complete. Good quality South Black |
| 6 | Extra for providing edge moulding to 15-18mm thick marble/ Granite/Kota stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite/Kota Stone Work Half Edge moulding |
| 7 | Providing and fixing of wall paneling on grid made out of PVC profile section of size 21x17mm with a wall thickness of 1.5mm+/-0.2mm,fixed on the existing wall with wood screw of size 50mm X 8mm with rowel plug at a spacing of 900mm center.uPVC profile section of size 150mm X 10mm with a wall thickness of 1.0mm+/-0.2mm to be fixed on the grid by self tapping screw of size 19mm X 6mm.Necessary cutouts for electrical connection to be provided at required places. The edge and periphery, finally to be covered by extruded PVC beading section of size 28mm X 12mm with a wall thickness of 1.0mm+/-0.2mm complete as per manufacture‟s specification and direction of Engineer-in-charge. |
| 8 | P&F of Wall cowl with BirdS creen Suitable for Outside Wall of Exhaust Fan Opening of following size and made out from 24 SWGGI sheet as per instructions of Engineer in charge including fixing with suitable fasteners etc. as required. All as per preapproved by Engineer incharge. For additional technical parameters of products/work ,refer Annexure\"A\" attached with this BSR . Suitable for 300 mm sweep Exhaust Fan |
| 9 | Providing and fixing glazing in aluminium door, window ,ventilator shutters and partitions etc. with PVS / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge.(Cost of aluminium snap beading shall be paid in basic item.) With float glass panes of 8 mm thickness |
| 10 | P & F Kitchen & Lab. Sink of approved make with C.I. brackets duly painted, 40 mm C.P. waste coupling, C.P. Brass chain with rubber plug, 40 mm G.I. waste pipe up-to floor level complete including cutting and making good the wall & floor : Fire clay glazed kitchen sink (I.S 771-1985 Marked) size 600 x 450 x 250mm. |
| 11 | P & F Bottle Trap of approved make : C.P Brass 40 mm |
| 12 | P& F waste Coulping with fittings of approved quality /make: C.P Brass 40 mm dia |
| 13 | P& F waste Pipe with all fitting P.V.C. with C.P. nut 40 mm dia |
| 14 | P & F almirah of 22 gauge G.I sheet with all fitiings with complete installation |
| 15 | Almirah lock of approved make Godrej or equivalent |
| 16 | Distempering with dry distemper of approved plan and maufacture to give an even shade including all scaffolding new work over and including scrapping and priming coat with cement primer Old work (one or more coats) including scrapping surface and necessary repairs. SAME COLOUR |
| 17 | Providing and Fixing 10 OZ flex duly printed with letter writing, design etc. complete as per required. |
| 18 | Supply and fixing of Modular work Station with Partition 22mm thick Aluminum top 25 mm thick particle board with post formed one drawer or one open able shutter one KBT or one CPU trolley Two 1200mm height storage unit. Size 3000 x 2700 x 1200mm single seat in combination |
| 19 | ADD FOR ELECTRIC & SAINATIRY WORK 3 % |
| 20 | Contingency 3% Please Enable Macros to View BoQ information |
