|
| 1 | CONSTRUCTION OF ARTISTIC GAZEBO IN CENTRAL ZONE,SOUTH ZONEAND WEST ZONE UNDER MPLADS FUNDS FOR VARIOUS LOCATIONS OF PARKS IN MUNICIPAL CORPORATION OF DELHI. |
| 2 | Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lifts upto 1.5 m including getting out the excavated soil and disposal of surface excavated soil as directed within a lead of 50 m .All kinds of soil. |
| 3 | Supply of6 nos m.s pipe of 150mm od and 10ft heightfor column |
| 4 | SupplY 6 nos of m.s plate of 6 mm thickness and 9\"x9\" sizefor closing pipe at one end of 150 mm od pipe |
| 5 | welding of ms plate of 6 mm thickness to one end of 150 mm pipe |
| 6 | Providing and laying 75mm thick compacted bed of dry brick aggregate of 40mm thick nominal size including spreading,well ramming,consolidating and grouting with jamuna sand including finishing smooth etc. complete as per direction of Engineer –in charge. |
| 7 | Provision and laying in position cement concrete of specified grade excluding and cost of centering and shuttering. Allwork upto plinth level(a) 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40mm nominal size |
| 8 | (b) 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 9 | Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth(a) Cement mortar 1:6 (1 cement: 6 coarse sand) |
| 10 | Steel work in built up tubular(hot finished welded type round,square,rectangular hollow tubes etc.) trusses, seating arrangement etc including cutting,hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washersetc. Complete |
| 11 | Providing and fixing of roofing sheet having kavelu design of 1-3 mm thickness and 2.5 m x 1 m size made up of LLDPE in brown color. Rates shall be inclusive of 30% (approx) wastage incurred while cutting the sheet into desired shapes. |
| 12 | Art work over columns of 8’ height including architectural design, mouldings, arches, shapes (like trunk of a tree, bamboos, rock or any character or element representing culture or tradition) and applying proper texture and paint to the finished surface to enhance the aesthetics. |
| 13 | Providing Sculpture like Man / Woman, Animal, Musical instrument or any character or element representing culture or tradition made in RCC / GRC |
| 14 | Art work over Seats / Benches including architectural design, mouldings, arches, shapes (like trunk of a tree, bamboos, rock or any character or element representing culture or tradition) and applying proper texture and paint to the finished surface to enhance the aesthetics. |
| 15 | Art work over roof by making architectural design, mouldings, arches, shapes (like trunk of a tree, bamboos, rock or any character or element representing culture or tradition) and applying proper texture and paint to the finished surface to enhance the aesthetics. |
| 16 | Art work over floor by making design/texture and applying paint to the finished surface to enhance the aesthetics. |
| 17 | Supply and fixing of sign boards of 0.91 x 0.61m size with support length of 3000 mm. Manufacturing, supplying and fixing of Retro reflective sign boards made of 2 mm thick aluminum sheet face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type – IV of ASTM-D 4956-01 in green and silver white including subject matter, message (bilingual(, symbol and borders etc as per IRC: 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 And fixing the same with suitable sized aluminum alloy rivets @ 20 cm c/c to back support frame of m.s angle iron of size 35x35x5 mm and m.s flat of 25x5 mm along with theft resistant measures, mounted and fixed with 2 nos. clamp of mls flats of size 25x5 mm to a vertical post of 3 mtr height made up of msl pipe of 60 mm n.b welded with two hold fast of m.s angle 25x25x3mm of 30cm length each at bottom and including making holes in pipes, angles, providing & fixing m.s message plate of required size, steel work to be paired with two or more coats of synthetic enamel paint of required shade and of approved brand and manufacture over a priming coat of zinc chromate yellow primer (vertical post to be painted in black/white/grey color) Backside of aluminum sheet to be painted with two or more coats of epoxy paint over an appropriate priming coast including all leads and lifts etc. complete as per drawing, specification and direction of Officer-in Charge |
