|
| 1 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50m outside the periphery of the area cleared. |
| 2 | Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. a)One coat. |
| 3 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : a)One or more coats on old work. |
| 4 | Varnishing with varnish of approved brand and manufacture: a)One or more coats with copal varnish. |
| 5 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. a)Semi rigid pipe 32mm dia |
| 6 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 7 | Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. a)10 litre capacity - White |
| 8 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 9 | 20 mm nominal outer dia. Pipes. |
| 10 | 25 mm nominal outer dia. Pipes. |
| 11 | Providing and fixing PTMT swivelling shower, 15mm nominal bore. Weighing not less than 40 gms. |
| 12 | Providing and fixing unplasticised P.V.C. connection pipe with PTMT Nuts, collar and bush of approved quality and colour. a)15 mm nominal bore with 45 cm length. |
| 13 | Providing and fixing PTMT bib cock of approved quality and colour. a)15mm nominal bore, 86 mm long. Weighing not less than 88 gms. |
| 14 | Cleaning of terrace/loft water storage tank (inside surface area) upto 2000 litre capacity at all heights with coconut brushes, duster etc., removal of silt, rubbish from the tank and cleaning the tank with fresh water disinfecting with bleaching powder @ 0.5gm per litre capacity of tank, including marking the date of cleaning on the side of tank body with the help of stencil and paint and disposing of malba, all complete as per direction of Engineer-in-Charge. (The old date already written on tank should be removed with paint remover or black paint and if date is not written with the stencil or old date is not removed deduction will be made @ Rs. 0.10 per litre if during cleaning any GI fittings or ball cock is damaged that is to be repaired by contractor at his own cost and nothing extra will be paid on this account) |
| 15 | Providing and fixing PTMT extension nipple for water tank pipe, fittings of approved quality and colour. a)25mm nominal bore. Weighing not less than 62 gms. |
| 16 | Providing and fixing PTMT angle stop cock 15 mm nominal bore. Weighing not less than 85 gms. |
| 17 | Cleaning of toilet Fittings, wall and floor with detergent/acid to make it clean and applying grouts where ever required including cleaning of floor traps for any chokage and smooth flowing of waste water as per direction of the Engineer-in-charge |
| 18 | Cleaning terrace of departmental buildings upto floor V level including mumty, rain water mouths etc. and disposal of rubbish in municipal dumpling area within a lead of 100 meter. a) Terrace area above 100 Sqm. upto 250Sqm. |
| 19 | Cleaning of under ground water tank/sump by pumping and bailing out water and deposited silt,rubbing walls and floor with coir brush and bleaching powder, washing the inner surface of sump with clean water and making the same dry by taking all safety precautions against life of labourrers and finally mixing bleaching powder to newly loaded water as per direction of the Engineer-in-charge. |
| 20 | Providing&Fixing PVC cover of approved quality with locking arrangement to PVC over head tank as per direction of the Engineer-in-charge |
| 21 | Cutting of trees grown in the walls/shafts up to floor five level of departmental buildingswith necessary scaffolding arrangements, safety precautions, making good the walls with Cement Mortar, applying chemical to prevent further growth etc., complete as directed by the Engineer-in-Charge. |
| 22 | Providing and fixing PTMT health faucet of approved brand and manufacture. a)15mm nominal bore |
| 23 | Credit for available dimantled unserviciable materials to agency (a) Old rusted MS/GI sheet, angle, flat, Tee and the like |
