Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling floor,hearth or wall tiling including cement mortar bedding (but not backing), terrazo dado/wall tiling and skirting. etc on brick or stone walls etc including racking out joints hacking for key and scrubbing and removing rubbish off the premisescomplete all as specified. |
| 2 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust and Brushing neat cement slurry with 3.0kg of cement per sq. metre, etc. all as specified & as directed. |
| 3 | M&L for25 thick cement concrete flooring type B-0 1:2:4 (12.5 mm graded stone aggregate) complete all as specified and directed. |
| 4 | M&L for vitrified Double charged/Ultracharged ceremic tiles (square / rectangular)area of each tile (size 1200 X 600mm) exceeding 0.42sqm but not exceeding 1.0 Sqm in floors etc., set and jointed in neat cement slurry and pointed in white cement mixed with pigment to match the shade of tiles including 15 mmthick screed bed or bedding layer of cement mortar 1:4 for laying floor finish even & faircomplete all as specified and directed by Engineer - in -Charge. |
| 5 | All as per Srl item No. 4.0 here in before but on vertical surfaces/skirting dados etc over 10mm rendering in CM 1:4 finished even and fair, complete all as specified and directed by Engineer - in -Charge. |
| 6 | M&L for ceramic glossy finish, joint free premium quality coloured tiles 600 X 300 mm and 8-9 mm thick, in any pattern of light & dark/highlighters tiles etc as approved, on vertical surfaces such as in skirting/dado etc, set and jointed in cement slurry over & including 10 mm thick rendering in cement mortar (1:4) and pointed in white cement with pigment to match the colour of tiles complete all as specified.Note : Dado should be flushed with the wall plastering. |
| 7 | M&L for anti-skid ceramic joint free premium quality coloured tiles 400 X 400 mm and 6-7 mm thick, as in floors etc. in any pattern of light & dark tiles as approved, set and jointed in neat cement slurry and pointed in white or coloured cement to match, in floors etc. over & including 20 mm thick screed in cement mortar (1:4) over and pointed in white cement with pigment to match the colour of tiles complete all as specified. |
| 8 | Dismantling stone slabsof any description or thickness in floors, apron etc laid bedded and pointed in any mortar |
| 9 | M&L for Z Black Telephonicgranite (of any type) 20 mm thick machine cut, bedded & jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, rounding of edges (moulding of edges) and polishing complete laid over 15 mm thick screed bed in CM 1:4 etc all as specified and directed by Engineer in charge. |
| 10 | M&L, Machine cut kota stone slab flooring, cills20-25mm thick over cement screed base laid and jointed With grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 11 | M&L, Kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete. |
| 12 | Dismantling of brick tiles or terracing tiles single layer on roof & disposal of retrieved material upto a distance n.exc 100m where directed, all as specified. |
| 13 | Demolition of mud/type of soilin roof, any depth including plastering and leaping (where full thickness removed disposal off rubbish upto a distance n.exc 100m, where directed. |
| 14 | Demolition of cementconcrete (unreinforced) of any description and in any position/old existing felt/plaster/tiles etc including removal of demolished material out of defence land complete all as specified. |
| 15 | M&L for levelling course for roof slab, PCC type B0, 1:2:4 (12.5 mm graded aggrigate) using water proofing compound (SBR) formaintaining proper roof slope and finishing cementconcrete surface even and smooth without using extra cement complete all as specified. (Minimum thickness of concrete should notbe less than 50 mm at any point).Note : Waterproofing compound should be measured and paid seperatley. |
| 16 | Supply of SBR waterproofing compound @ 2% of per kg cement used complete all as specified . Make Fosroc/Sika/Choksey/Bostik/STP/Asian Paints / Berger Paints |
| 17 | OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm.(a) After proper surface preparation, Apply one coat of Primer for PU coatingas per manufacturers specification.(b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalentby brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat ofShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger PaintsNote : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicatorapproved by GE.(iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years. |
| 18 | Making benching with PCC (1:2:4) type B0 using WPC along side wall adjoining to roof in concave shape complete all as specified. |
| 19 | Taking down chowkats or frame with shutter (without taking out shutter from the frame) not exceeding 1.50 sqm each as doors, windows & ventilators etc. and removal from site all as specified and directed. |
| 20 | Taking down chowkhats or frame exc 1.5 Sqm but n.exc 4 Sqm each with shutters(W/out taking off shutters from the frames). |
| 21 | Taking down shutters of any description exc 1 Sqm but not exc 2 Sqm each and removal complete all as specified |
| 22 | Taking down wooden shutters only of any description area exceeding 1.0 sqm and not exceeding 2.0 sqm each and refixing in same opening after necessary easing, adjustments, minor repairs, oiling, adjustment with cutting or fixing plain fillets/planks made from second class hard wood etc to remove gap between floor and shutter complete all as specified and as directed by Engineer-in- charge. |
| 23 | S&F for pressed steel frames of size 105 X 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, locks strike plate etc, (thickness ofsheet shall be 1.25mm) and making good the wall with plaster in CM 1:6 complete all as specified. |
| 24 | M&L PCC 1:3:6 type C-1 using 20 mm graded stone aggregate for filling in back of pressed steel door frame/chowkhat and fixing of bed block of hold fast etc complete all as specified and as directed. |
| 25 | S&F40 mm thickfactory made flush shutterPlain, framed, solid core consturction with block board core and plywood face panels, commerical type on both sides covered with mica on both sides complete all as specified and directed by Engineer-in-charge. |
| 26 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners deemed to be included in quoted rates.) |
| 27 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fastenersdeemed to be included in quoted rates) |
| 28 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives(maximum toxicity index of 12 for 100 gms) abricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners deemed to be included in quoted rates.).Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.Note : 1: Test certificate of manufacturer to be provided by contractor . 2.Embossing with barcode of manufacturer engraved over each door frame and shutter ismanadatory. |
| 29 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge (Note: (a) stainless steel(304 grade) finishedbutt hinges 100mm -04 Nos per leaf(b)Stainless steel (304 grade ) finished square tower bolt 200mm long -02 Nos per leaf (c)stainless steel (304 grade) finished handles 200mm -02 Nos per leaf(d)stainless steel (304 grade) finishedsliding door bolt 300mm -01 Nos per leaf (e)Stainless steel (304 grade ) finished floor door stopper-01 Nos per leaf Note : 1: Test certificate of manufacturer to be provided by contractor . 2.Embossing with barcode of manufacturer engraved over each door frame and shutter ismanadatory. |
| 30 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid decorative typeglazed/guage skeletondoor shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge),minimum compressive strength 50 N/mm2, modulus ofelasticity 850 N/mm2 and resistance to spread of flameof Class A category with property of being termite/borerproof, water/moisture proof and fire retardant and fixingwith stainless steel butt hinges of required size withnecessary full body threaded star headed counter sunk S.S screws,including s&f of stainless steel steel 304 grade (natural finish) wire cloth , all as per direction of Engineer-In-Charge.including S&F including following items: (Note: (a) stainless steel(304 grade) finishedbutt hinges 100mm -04 Nos per leaf(b)Stainless steel (304 grade ) finished square tower bolt 200mm long -02 Nos per leaf (c)stainless steel (304 grade) finished handles 200mm -02 Nos per leaf(d)stainless steel (304 grade) finishedsliding door bolt 300mm -01 Nos per leaf (e)stainless steel (304 grade) finished floor door stopper -01 Nos per leaf(f) stainless steel (304 grade) wire cloth fixing as per manufacture.Note : 1: Test certificate of manufacturer to be provided by contractor . 2.Embossing with barcode of manufacturer engraved over each door frame and shutter ismanadatory. |
| 31 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. for fixing MosquitoMesh and XTN aluminium mesh combinely panel area of door except stiles and rails to be panelled wire mesh with self tapping rpund headed screws atrequrd distance, scres and edge covered with feathered pvc edge beading all around mesh and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer in- Charge.(a) Stainless Steel (304 Grade) Finished Tower Bolt 200mm long - 2 nos per leaf(b) Stainless Steel (304 Grade) Finished Handles 200 mm - 2 nos per leaf(c) Stainless Steel (304 Grade) Finished Sliding Door Bolt/Aldrop16x250mm- 1 nos per leaf(d) Stainless Steel (304 Grade) Finished Floor Door Stooper- 1 nos per leafNote : 1: Test certificate of manufacturer to be provided by contractor . 2.Embossing with barcode of manufacturer engraved over each door frame and shutter ismanadatory. |
| 32 | S & F factory made uPVC sliding window three track made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) with or without provision of opening for cooler as directedincluding all fittings, steel roller system, locking arrangement etc., making arrangement for fixing of hardware, glass, wiremesh, grill etc all as per manufacture instruction andDrg No BTD-890/R.Note:- The unit rate quoted by contractor excludes cost of glass & wire mesh and includes all other connected accessories. Net Opening will be measured for payment purpose.Wire mesh and Glass Shall be measured and paid Seperatly .Provision of all other items as shown on DWgs & Cutting holes of suitable depth in wall for inserting lugs etc including making gooddismentalled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggreegate and cement mortar (1:3) shall be deemed to be includedNote :- Description of items amend accordingly as per manufacturer instructions,Note : 1: Test certificate of manufacturer to be provided by contractor . 2.Embossing with barcode of manufacturer engraved over each door frame and shutter ismanadatory. |
| 33 | S & F factory made uPVC window or ventilator side hung/top hung (glazed and gauge both) made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm) including all fittings like hinges, tower blot, peg stay, locking arrangement etc., making arrangement for fixing of hardware all as per manufacture instructionandDrg No BTD-890/Rall as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass & wire mesh and includes all other connected accessories. Net Opening will be measured for payment purpose.Wire mesh and Glass Shall be measured and paid Seperatly. Provision of all other items as shown on DWgs & Cutting holes of suitable depth in wall for inserting lugs etc including making gooddismentalled portion with PCC (1:2:4) type B-0 using 12.5mm graded crushed stone aggreegate and cement mortar (1:3) shall be deemed to be include.Note :- Description of items amend accordingly as per manufacturer instructions,Note : 1: Test certificate of manufacturer to be provided by contractor . 2.Embossing with barcode of manufacturer engraved over each door frame and shutter ismanadatory. |
| 34 | M & L toughned glasss, figuredglass ordinary quality 5 mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified. |
| 35 | S&F Stainlesssteel wire cloth 0.36 mm nominal dia of wire and avarage width of aparture 1.40mm and fixed etc., complete all as specified |
| 36 | M & L sheet Pin headed glass4.0mm thick and glazing with oil putty in square n exc 0.50 Sqm in each panes fixed to steel, metal or wooden window frames complete all as specified. |
| 37 | S&Fin repairs 100 mm Butt hinges stainless steel with galvanised mild steel hinge pin and fixed type C-21 all as specified and directecd by Engr-in-charge. |
| 38 | S& Faluminium anodised barrel tower bolts of extruded section and fixed 150 mm size complete all as specified & directed by Engineer in charge. |
| 39 | S & Faluminium handles D type with back plate, anodised, 200mm long complete all as specified and directed by Engineer - in -Charge. |
| 40 | S&F300 mm mild steel sliding door bolts, clip type, stone enameled block with bright bolt not less than 12mm dia with and incl a minimum of 6 boltsand nuts, 4 on bolt plate 2 on staple plate. |
| 41 | Dismentling of boarding any description fixed in any position with nails/ screws complete all as specified. |
| 42 | Supply & fixing 18mm thick Plywood, grade BWR, type BB, fixed with screws toframe work along with one side laminate and other side plain white 0.9mm thick type-I, colour pattern as approved including PVC lipping, PVC sheet is heat bent as lipping on the edges of doors complete all as specified and as directed by Engineer-in-charge. |
| 43 | S&F continuous (piano) hinges 20mm & 12 MM width of flap, mild steel bright finish or electrogalvanised of complete all as specified |
| 44 | S & F hasp and staple, safety type of aluminium anodised100mm size fixed with screw complete all as specified and directed by Engineer - in -Charge. |
| 45 | S&F 25 mm size magnetic catches with Plastic body and striking plate including letting in and fixed complete |
| 46 | S&F stainless steel handles,150 mm long complete all as specified and directed. (back platestaple D type) |
| 47 | Supply & fixing Factory made prefabricated Pressed steel Door frame made out of mild steel 1.25mm thick girth of frame 185mm including necessary MS rawl plug/bolts and fixing 75mm long butt hinges medium weight cold rolled mild steel etc and shutter including stiffeners made out of mild steel sheet 1.25mm thick cut to size, holes punched and welded seams including bending or turning up all around, mitred angle etc as required with Locking arrangement using mild steel mortise lock 4 levers with 2 Nos of keys of size 100mm (Make Godrej/Harison/Navtal) including MS chromium plated handle and 2 Nos MS locking rods out of 8 mm dia not exc 1000mm long fixed to mortise lock and handle with necessary bolts and nuts covered by MS sheet 1.25 mm thick complete including two coat of synthetic enamel paint over a shop coat of zinc chromate primer on interior surface (not -visible from front) and hammer tone paint on exterior surface ( visible from front) as per Godrej Pattern complete all as specified and as directed by Engineer-in-charge. |
| 48 | Demolition of Cement concrete (unreinforced) of any description and in any position not otherwise specifically provided. |
| 49 | Material and labour for water proofing treatment to RCC sunken slab and adjoining vertical slab as described following any one complete as per dirns of GE.Note :- Plan area only measured of toilets for payment purpose.Method (A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp proof 2K, having 100% elongation as per ASTMD412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 clean all working surface and made free from dirt, grease laitance etc.After inspection for all working area ough surface, cracks and construction joints are treated by polymer modifiedmortar 1:4:4(1 Cement: 1Polymer: 4 Sand). Making Gola of size 75 x 75mat junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 cement : 1 Polymer : Sand ).The coating shall be 2 parts of powderand 1 part of liquid without any water addition in he mixing and shall have consumption of 1.5Kg/Sqm per coats, etc, complete as per manufacturers specifications.(B) Bore packing:- All the borehole gaps between concrete surface and PVC pipe of various surface of various dia upto the neck of lvel of shall be filled with non-shrink free grout. – Smart Care GP Grout having dual shrinkage compensation property.Before the bore packing, surface of the PVC pipe and concrete surface will be made rough and sand sand will be sprinkled with polymer bonding agent.(C)Apply 12-15mm plaster on slab and vertical surface admixed with Vitalia Neo @200ml per bag of cement before treatment. |
| 50 | Material and labour for water proofing treatment to walls surfaces of toilets/baths/WC\"s (1600mm in toilet and 2100mm in bathroom on vertical wall surface) with following applications complete all as specified and as directed by Engineer-in-Charge :-(a) Applying first coat of chemical pidifin 2K (Dr Fixit) or equivalent on cleaned surfaces @ 0.86 Kg/Sqm (Minimum) and drying for 24 Hours(b) Applying second coat of chemical Pidifin 2K (Dr Fixit) @ 0.86 Kg/Sqm (minimum) or Techno commercial equivalent make. |
| 51 | PCC 1:5:10, type E-2 as in filling of sunken floors etc. complete all as specified and directed. |
| 52 | M&L 40 mm GI pipe medium grade, made to shape as in spout pipe in sunken/ verandah/ Balcony complete all as spedifed |
| 53 | Demolition of RCC of any description such as Kitchen chimney, chajja, shelves, OHT Tanks. etc and in any position not other wise specially provided for complete all as specified and directed by Engineer in Charge (reinforcement cut as required to facilitate demolition) |
| 54 | M&L for reinforced nominal mix cement concrete type B1 1:2:4 (20 mm graded stone aggregate) as in Slab supported on walls for tank staging and in shelves and etc. and setting in mortar complete with joints to match complete all as specified and directed by Engineer-in-charge |
| 55 | M&L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips all as specified |
| 56 | Use and waste of form work torough finished surfaces of soffits of suspended slab such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick |
| 57 | Form work to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5cm but n exc 10cm wide rough finished complete all as specified and as directed by Engineer-in- charge. |
| 58 | Taking down Cement plaster including raking out joints hacking for key scrubbing down with water etc. |
| 59 | M&L for rendering 15 mm thick in cement mortar 1:6 onfair face of brick work of walls, finished even & smooth without using extra cement,complete,all as specified. |
| 60 | M&L for rendering 15 mm thick in cement mortar 1:4 (10mm thick rendering in first layer and 5 mm thick rendering in second layer)onfair face of brick work of walls, mixed with water proofing compound (ISI marked) @ 3% by weight of cement or as per manufacturer’s instructions, finished even & smooth without using extra cement complete all as specified.Note : - Supply only water proofing compound shall be measured and paid for separately. |
| 61 | Supply only integral water proofing compound, ISI Marked. |
| 62 | M&L for rendering 5 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement,complete,all as specified. |
| 63 | M&L for prepration of New plastered Internalwall surface completeapplying the following :-(a) Applyingtwo coat1.5 mm wallcare puttyon wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b)Applying one coat of internal Wall Primer by using Roller over complete all as specified(c)Applying two coat of interior acrylic Emulsion paint using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 64 | M&L for prepration of New plastered Externalwall surface completeapplying the following :-(a) Applying two coat1.5 mm wall care puttyon wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b)Applying one coat of Exterior Wall Primer by using Roller over complete all as specified(c)Applying two coat of Advcanced Dust Proof Emulsion paint using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 65 | M&L for prepration of New plastered ceiling surface completeapplying the following :-(a)M&L 1.5 mm wall care putty in two coats on ceiling surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directed complete all as specified.(b)M&L two coat of interior acrylic emulsion over a coat of chalk whitening priming by using Airless spray / Roller over complete all as specified . |
| 66 | M&Lfor complete removal of existing treatment including filling depression of scraped surface (a) Applying onecoatwall care puttyon wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b)Applying one coat of internal Wall Primer by using Roller over complete all as specified(c)Applying two coat of interior acrylic Emulsion paint using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 67 | M&Lfor complete removal of existing treatment including filling depression of scraped surface with1.5mm wall care putty in one coat on old ceiling surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as specified and directed complete and applying two coat of interior acrylic emulsionof approved tint over a coat of primer on old prepared surface by using Airless spray / Roller over complete all as specified & directed. |
| 68 | M&L for complete removal of existing treatment including filling depression of scraped surface on Old external wall surfaces(a) Applying one coat1.5 mm wall care puttyon wall surface and smoothening the surfcae with sand papers / Mechanised sanding etc prepatory to paint as directedcoomplete all as specified(b)Applying one coat of Exterior Wall Primer by using Roller over complete all as specified(c)Applying two coat of Advcanced Dust Proof Emulsion paint using Roller over complete all as specified Note : Contractor may use manual scraping tools for complete removal and surface prepration with prior approval of Engr-in-chrge in case of places where using of Mechanical equiment are not posiible |
| 69 | M&L two coats of synthetic enamelexc 10 cm width /girth on OLD steel surfaces including preparation of surfaces complete all as specifiedand directed. |
| 70 | M&L two coats of synthetic enamelexc 10 cm width /girth on OLD wooden surfaces including preparation of surfaces complete all as specifiedand directed. |
| 71 | Material and labour for Preparation ofnew wooden or wood based surfacesof any description not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed by Engineer-in- charge. |
| 72 | Material and labour for repair of chajja facia using cement mortar (1:3) n.exc 300 mm girth finishing the surface even and smooth complete all as specified and as directed by Engineer-in-Charge. |
| 73 | M&L for Obliterating old writing of any description, n exc 0.1 sq. m, with paint to match existing work etc complete all as specified and directed by Engineer - in -Charge. |
| 74 | M&L for Writing letters or figures with fluorecent paint ( Block. Roman, Italic or Indian) n exc. 30 cm high etc complete all as specified and directed by Engineer - in -Charge. |
| 75 | Dismantling of brickwork built in cement mortar of any description complete all as specified and directed as per Engineer-In-Charge |
| 76 | M&L brick work with sub class B bricks straight or curved on plan exceeding 6 mtr mean radius in cm 1:6 etc.complete all as specified and directed by Engineer - in -Charge. |
| 77 | M&L halfbrick work with sub class B bricks straight or curved on plan to any radius in cm 1:4 etc.complete all as specified and directed by Engineer - in -Charge. |
| 78 | Dismantling and disconnecting existing CI soil waste/vent pipe 100 mmbore fixed to wall,laid in trenches incl all fittings & accessories |
| 79 | Dismantling and disconnecting of existing CI soil waste/vent pipe 75 mmbore fixed to wall,laid in trenches incl all fittings & accessories |
| 80 | Taking down rain water pipe and eaves gutters(any size and pattern) including all fittings heads shoes bends swan necks etc including cleaning or refixing or removal to store(measured overall as fixed along the centre line over fittings and accessories) |
| 81 | Supply & fixing 110mm bore uPVC pipesgrade \"B\"single socketedin any length with rubber ring joints, fixed along walls with and including suitable size clamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) of suitable size fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.Note:-Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steelmaterial with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. |
| 82 | Supply & fixing 75mm bore uPVC pipesgrade \"B\"single socketedin any length with rubber ring joints, fixed along walls with and including suitable sizeclamps/brackets (interval of 1m and pipe keeping 100mm away from wall ) fixed with fasteners/nut bolts, joints fixed with pipe joint lubricant complete all as specified and as directed by Engineer-in- charge.Note:-Bracket, clamp, nut bolt, fastner, slotted channel etc shall be made of deep drawn low carbon steelmaterial with hot dip zinc aluminium flake coated and fixed all as shown on BTD drawing cost for same shall deemed to be included in the quoted unit rate and nothing extra shall be admissible on this account. |
| 83 | S & F 110 mm bore of pipe uPVC bends of any radius / shoefixed to PVC pipes as directed |
| 84 | M&L uPVCbranchpieces, 110 mm bore, (equal or unqual), double (double Y) complete all as specified and directed by Engineer-in-Charge. |
| 85 | M&L uPVC110 mm vent cowl complete all as specified and directed by Engineer-in-Charge. |
| 86 | S & F 75 mm bore of pipe uPVC bends of any radius / shoefixed to PVC pipes as directed |
| 87 | M&L uPVCbranchpieces, 75 mm bore, (equal or unqual), double (double Y) complete all as specified and directed by Engineer-in-Charge. |
| 88 | M&L uPVC75 mmP Trap complete all as specified and directed by Engineer-in-Charge. |
| 89 | Taking up or down GI tubing 15 mm bore pipe including cleaning for re-fixing or removal to store. |
| 90 | S&F CPVCISI SDR 11 pipes 20 mm diawith all fitting, including all Brass Fitting and fixed to walls & ceilings or laid in floors, bore of pipe 20 mm complete all as specified. |
| 91 | Cutting holes in brick walls built in cement mortar including making good dismantled portion in CM (1:3) or cement concrete (1:2:4) type B-1 exc half brick but n.exc one brick complete all as specified. |
| 92 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth.In brick walls. |
| 93 | Taking up or down GI tubing 20 mm bore pipe including cleaning for re-fixing or removal to store. |
| 94 | S&F CPVCISI SDR 11 pipes 25 mm diawith all fitting and fixed to walls & ceilings or laid in floors, bore of pipe 25 mm complete all as specified. |
| 95 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 96 | PCC (1:3:6) type C-2 (using 40mm graded agg) 75mm thick as in plinth protection . |
| 97 | M&L for 50 mm thick cement concrete , 1:4:8 type D2 (Using 40mm graded stone aggregate)flooring,paving etc. concrete complete all as specified and directed. |
| 98 | M&L for Machine pressed Precast cement concrete interlocking coloured ( glossy finished / ruberised paver block with grey cement and pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness M-35 grade with and including 25mm thick sand cushining complete all as specified and directed by Engr-in-charge. |
| 99 | M&L for30 cm x 30 cm x (20 to 25) mm thickmachine pressed chequered cement concrete tiles(rubber moulded) set jointed and pointed in neat cement slurry in floors with grey cement including 15mm thick screed in CM 1:6 withpigments complete all as specified and directed by Engineer-in-Charge. |
| 100 | Supply and laying factory made kerb stone of M-25 grade cement concrete laid in position to the required line, level and curvature, jointed with cement mortar (1:3) (1 cement:3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete all as specified and as directed. |
| 101 | Dismantling water tanks of any description exc 250 and n.exc 1000 ltrs capacityand removal from siteall as specified and directed. |
| 102 | S&F 500 ltrs capacity Rotational moulded polyethylene in white coloured three layered ISI Marked water storage tanks (cylindrical vertical with closed top) including 20 mm ball valves high pressure of PTMT with epoxy coated aluminium rod & hihdesity plastec ball screwed for iron pipe hoisted and fixed in position all as per specified and directed. |
| 103 | S&F rotational moulded polyethylene water storage tank 1000 ltrs capacitythree layered (Cylindrical vertical with closed top) hoisted and fixed in position including 25mm bore PTMT ball valve, high pressure with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe or brass ferrule (minimum weight 455gms) complete all as specified and directed by Engineer - in -Charge. |
| 104 | S&F 25 mm bore cpvcgate valve with handle, screwed both ends for inlet & outletpipe and fixed complete all as specified and directed. |
| 105 | S& F single lever High flow divertor consisting of exposed part kit with operating lever , wall flange & button and concealed body ,cartdge sleeve and also including bath spout with flange chromium plated ,screwed down, high pressure all as specified make Cera:(exposed part F1020721, concealed part F4030101, bath Spout F1020661), Jaquar or equivalent in same Pattern |
| 106 | S&F15mm bore Long body bib tap, cast copper alloy, chromium platedwith capstan head, screwed down, screwed for iron pipe or for brass ferrule,complete all as specified & directed. |
| 107 | S&F CP angle valve for 15 mm bore pipe with capstan head long screwed shank including cp cover plate fancy type fixed as in repair. |
| 108 | S&F in repairsVitreous china premium/1st quality wash downwater closet wall hung EWC white(closed pattern incl all necessary like rag bolts/gel gasket, PVC (SWR) WC connector benty type etc.) Plastic water closet soft slim seat cover, white, closed pattern with flat bottom, and cover with aluminised hinging device complete all as specified and as directed. |
| 109 | S&F in repairs concealedcistern set with full frame compatible with wall hung type water closet complete all as specified and drected by engineer in charge. |
| 110 | S & F in repairsvitreous China squatting pan of Orrissa pattern of approved make of size 580 mm X 440mm white with integral foot rests (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe incl lime concrete bedding and connection to antisyphonage pipe etc including making good to floor. |
| 111 | S & F in repairs PVC low level cistern of 10 ltrs capacity with top push buttion inclusive of brackets and PVC bend long type and connectin to flush pipe of any size and pattern with inlet ball valve float and handle complete of approved |
| 112 | S&F vitreous china premium/1st quality wash basin (under counter), white/ivory/off white, size 580x430 mm including S&F all accessories as recommended by manufacturer and incl. CP bottle trap 32 mm with inlet and outlet screwed for pipe or connections incl all necessary accessories for fixing, packing, union andincl 32mm brass CP waste coupling and complete fixed in position in all respect as per manufacturer\"s instructions and taking down existing of any description/size all as specified. |
| 113 | S&F central hole wash basin mixer 15mm bore brass without polp up waste with 10mm dia 450mm long copper pipes. |
| 114 | S&F Brass CPwallMixerfor mixing hot and cold water screwed down for iron pipe and fiedcomplete all as specified and directed by Engineer - in -Charge. |
| 115 | S&F in repairs SS soap dish of any size fixed withscrews complete all as specified and directed by Engineer in charge. |
| 116 | S & F in repairstainless steeltubular towel rail 20mm dia “D” type 60 cm long between flanges including brackets complete all as specified and directed by Engineer - in -Charge. |
| 117 | S & F in repairstainless steeltowel ring min 30mm dia including brackets complete all as specified and directed by Engineer - in -Charge. |
| 118 | S & F instainless steel toiler paper holder fixed with screw/ necessary fittiingscomplete all as specified and directed by Engineer - in -Charge. |
| 119 | S&F corner glass self 300mm ( withBrass Brackets) fixed with chromium plated screws etc all as specified and as directed |
| 120 | S&F and shower health faucet to EWC ,CP brass with minimum 1000mm long CP flexible pipe, connection etc., complete all as approved by engineer -in -charge |
| 121 | S & F PVC connection 15 mm size with PTMT nuts of length 600 mm of approved quality complete all as specified |
| 122 | S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe including 40mm dia CPBrass waste fitting amd waste pipe overall size of SS sink495mm x 420mm bowl size 410mm x 330mm x 160mm, etc complete all as specified and as directed. |
| 123 | S&F vitreous china urinals, Half stall type flat backcomplete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe grating and union for discharge pipe including waste pipe and trap complete all as specified and directed by Eng in charge. |
| 124 | S&F Urinal spreader of PTMT any colour for fixing 15 mm dia pipe complete all as specified and directed by Engineer in charge. |
| 125 | S & Fwaste couplings of stainless (half or full threaded) of32 mm complete all as specified and directed by Engineer in charge. |
| 126 | S&Flow density polyethylene pipes (LDPE) 32 mm*800 mm long of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors complete all as specified and directed by Engineer in charge. |
| 127 | S&F in repair brass chromium plated shower rose 125 mm of size with arm and with or without swivel joints to steel pipe or union complete all as specified and as directed |
| 128 | S&F hat pegs and hooks (cloth hanger with six peg set each) complete all as specified. |
| 129 | S & F1.50mtr x 600 mm size bevelled edge looking mirror of selected quality glass and fixed with chromium plated brass studs/screws and cup washers complete all as specified and directed by Engineer - in -Charge. |
| 130 | S&F Stainless Steel grating 125mm dia with waste hole (Minimium weight 40 grams) |
| 131 | S&F Stainless Steel grating 100mm dia without hole (Minimium weight 25 grams) |
| 132 | Dismantling Asbestos cement ( corrugated, semicorrugated ,etc.) sheets in roof coverings complete all aspecified. |
| 133 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified. |
| 134 | Excavating in post holes in soft/loose soil (or similar holes) each n exc 0.5 cum getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed by Engineer in charge. |
| 135 | M&L PCC 1:2:4 (40mm graded stone aggregate) type B2,in foundation of posts and strutscomplete all as specified and directed . |
| 136 | M&L for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 grade St. 240 complete all as specified and directed . |
| 137 | M&L mild steel workas in framed worki.e. Angle iron/flat iron including caps , bases, splices, all lattice bars, cutting tops to shape, drilling holes, notching for wire etcconforming toFe-290 grade E-165 complete all as specified and directed . |
| 138 | S&F Pre-painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 139 | M&L two coats of synthetic enamel over a coat of red oxide primer exc 10 cm width /girth on new steel surfaces including preparation of surfaces complete all as specifiedand directed. |
| 140 | S&F mild steel screw bolts (machine made) with hexagonal or square head at one end, screwed end to be fitted with washer and one hexagonal/ square nut not exceeding 5cm long complete all as specified and directed by Engineer - in -Charge. |
| 141 | S & F for Rolled mild steel in plates ( plain or chequered ) channels, square cut or notched ( ordinary and counter sunk) forming holes , without any attachment conforming toFe-290 grade E-165 complete all as specified and directed . |
| 142 | S & F framed work such as grills, grating, etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming toFe 290 – Gde – 165 complete all as specified and directed. |
| 143 | Dismentling wall paneling ( fibre, pulp, insulation ,etc. ) or insulation boards/panels/blankets, any thickness, including cover fillets complete. |
| 144 | S & F Solid laminated both side with coloured PVC Wall paneling/Liningcon-sisting of5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed by Engr-in-charge. Note : Colour of paneling will be approved by GE /Engr-in-charge |
| 145 | S & F for 5mm thick laminated both side with coloured PVC sheet fillet of width 35mm for wall paneling frame work inclusive of fixing on to wall to make PVC Frame as per specification and draw-ing complete all as specified and directed by Engr-in-charge.Note : - Colour of panneling will be decided by GE/ Engr-in-charge. |
| 146 | Dismentling wall and ceiling boards ( fibre, pulp, insulation ,etc. ) or insulation boards/slabs/blankets, any thickness, including cover fillets complete. |
| 147 | S&F for Hangers 3mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3 mm size 60mm long as in hook and expansion hold fasteners 12.5mm dia 40mm long complete all as specified. |
| 148 | Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete all as specified and directed. |
| 149 | Providing and fixing 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200 mm size board of siliceous and calcareous material reinforced with ellulose fibre fixed to the ceiling section with 25 mm long self drilling and tapping screws having phillips head with under head cutter at 200 mm centre to centre, including finshing the joint of face board with specially formulated jointing compound and 48 mm wide fibre tape to provide seam less finish (Frame work for ceiling shall be measured and paid separately) complete all as specified and directed. (Note :- Design of ceiling approved by GE ) |
| 150 | S&F in repairs stainless steel curtain rod 25 mm dia (minimum weight 0.36 Kg per RM) with brackets, fancy knobs and rings (20 cm c/c) etc complete all as specified and directed by Engr-in-charge. |
| 151 | Dismantling structural steel work including doors, gates and staircase railingbut excluding framed truss complete all as specified and directed by engr-in-charge. |
| 152 | M& L for providing and fixing stainless steel (Grade 304) railing made of Square hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) & Providing baluster and necessaryfitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement. |
| 153 | Taking down carefully aluminium point wiring (light, fan, socket or power, bell complete fitting such as sockets, ceiling roses, pendants, batten holders, regulators and making good the disturbed surfaces of wall, floors, ceiling in CM 1:3 etc complete all as specified and directed by Engineer - in -Charge. |
| 154 | M & Lfor concealed conduit point wiring complete for light/ fan on independent /combine boardwith cable 2.5 sqmm (Nominal area) FRLSHPVC insulated multistranded unsheathed copper conductor,drawn in and includingPVC Concealed conduitpipe medium grade 20 mm dia, pipe hooks , elbows, juction covers and junction boxes , aftercutting in wall chasing for conduits and sinking\"s for modular metal flush boxes suitable lengthand Min 1.6 mmthickness, Min 51 mm depthfor mounting, switches, sockets,fan regulatorwith modular cover plate with frame and making the gooddisturbed surfaces of wallin CM 1:3 with white wash or existing colour including provision ofcontinuousearth continuity conductoralong with point wiring of 2.5 sqmm copper PVC insulated cable for one light/ fan point controlled by one switchand connected to commonearth dolly, complete all as specified anddirecedby the Engineer in charge. |
| 155 | All as per Srl item No -154 here in before but for one switch socket combination5/6 amp on independent board complete all as specified and directed by Engineer - in -Charge. |
| 156 | All as per Srl item No -154 here in before but for one three pin socket outlet 5 Amp on same board with other switches complete all as specified and directed by Engineer - in -Charge. |
| 157 | All as per Srl item No. 154 here in before but for one switch socket combinationt 6 pin 5/ 15 Amps on independent board with copper conductor 2.5 Sqmm complete all as specified and directed by Engineer - in -Charge. |
| 158 | All as Srl item No. 154 here in before but for one light point controlled by two 2 ways switches complete all as specified and directed by Engineer - in -Charge. |
| 159 | All as Srl item No. 154 here in before but for call bell point complete all as specified and directed by Engineer - in -Charge. |
| 160 | All as per Srl item No. 154 here in before but for Industrial Socket on independent board with copper conductor 4 Sqmm complete all as specified and directed by Engineer - in -Charge. |
| 161 | S & F modular switch5/6 Amps single pole one way,one module complete all as specified and directed by Engineer - in -Charge. |
| 162 | S & F in repairModular switch 1 way 16A,with box complete all as specified and directed by Engineer - in -Charge. |
| 163 | S & F in repairmodular Socket,16A - 2/3 pin combined 2 Module complete all as specified and directed by Engineer - in -Charge. |
| 164 | S & F modular switch5/6 Amps single pole two ways complete all as specified and directed by Engineer – in -Charge. |
| 165 | S & F modular socket outlet 5 pin 5/6Amps flush type complete all as specified and directed by Engineer - in -Charge. |
| 166 | S&F modular bell push 5 Amp complete all as specified and directed by Engineer – in -Charge. |
| 167 | S&F Ceiling rose, surface baklite 65x17 mm three terminal ISI marked complete all as specified and directed. |
| 168 | S&F Buzzer AC 230 single pole Volt ding dong type complete all as specified and directed by Engineer - in -Charge. |
| 169 | S & F in replacement of existing light fitting withLED batten with aluminium housing andintegrated electronic driver,20 watt having input voltage AC90-300V, 50 Hz , 6500K, and all other accessories including connection with flexiblecable copper conductortwin coreof size 23/.2 mm upto ceiling rose/connector complete all as specified and directed by Engineer - in -Charge. |
| 170 | S&Fin replacement security light fitting LED TYPE 25 watt with all necessary acessories, Clear transparent acrylic cover, prewire suitable to operated on 230 volt 50 HZ AC & Supply and fixing to wall / on pole including fixing arrangement with suitable galvanized iron pipe 35 mm bore “light grade” brackets 2 mtr length bent to shape to obtained required shape including clamps, nuts / bots / washers etc connecting with suitable flexible copper wire of size 23/0.0076 complete all as specified and directed by Engineer - in -Charge |
| 171 | S & F in replacement angle holder insulated body with back plate for conduit fittings complete all as specified and directed by Engineer - in -Charge |
| 172 | S&F LED lamp 9W for angle holder complete all as specified and directed by Engineer - in -Charge. |
| 173 | S & F modular stepped type, fan regulator not less than 120 watt for ceiling fan 1200/1400mm sweep complete all as specified and directed by Engineer - in -Charge |
| 174 | S & Fin replacement Water tight bulk head fitting,comprision of connector galvanised cast iron back plate,weather proof enamelled gallery ,glass well,and including 10 watt LED lamp all as specified and directed by Engineer - in -Charge |
| 175 | S&F in replacementrecess mounting 2 X 2 feet 36 watt LED luminaire with powder coated CRCA housing with LEDs,seamless front frame with high transmission acrylic cover and fixed electronic driver (surge protector) complete all as specified and directed by Engineer - in -Charge. |
| 176 | Taking down fan, ceiling cable end, dismantling blades and removing fan and blades to store complete all as specified and directed by Engineer - in -Charge. |
| 177 | Supply & fix Air Circulator fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting complete all as specified and directed by Engineer - in -Charge. |
| 178 | S&F ceiling fans AC single phase 230/240 V of size 1200 mm sweepwithout regulator having Min air delivery 210 CFM with service value 6.00 BEE5 star rated with brushless direct current motor (BLDC) complete with electrical connection providing three core round flexible copper conducter cable of suitable sizecomplete all as specified and directed by Engineer-in-charge. |
| 179 | S&F heavy duty metal body exhaust fan of 250mm sweep , 240 volt ,complete with louvers and shutter and mounted in suitable opening arrangement in wall and connecting up including 3 core PVC insulated PVC sheathed copper conductor flexible cable 24/0.2mm from ceiling rose to fan complete including breaking of brick wall and making a hole for fixing of exhaust fan including grouting of bolts and making good to disturbed wall in CM (1:4) white washing matching with existing color etc complete all as specified and directed by Engineer - in -Charge. |
| 180 | Supply and fix electric water heater, storage type steel body with glass coating SS tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc complete all as specified and directed by Engineer - in -Charge. |
| 181 | S & F PVC connections 15 mm size with PTMT nuts of length 600mm suitable for Hot/cold water application complete all as specified and directrd by Engineer in Charge. |
| 182 | S & F bib taps,cast copper alloy with crutch or butterfly handle,screwed down,screwed for iron pipe or for brass ferrule and fixed of size 15mm bore complete all as specified and directrd by Engineer in charge. |
| 183 | S & F gun metal globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed for GI pipes of size 15 mm bore complete all as specified and directrd by Engineer in charge. |
| 184 | S&F steel water tubing medium grade galvanised 15 mm bore with all fittings and fixed recess in walls and ceilings or laid in floors including making good to disturbed surfaces complete all as specified and directrd by Engineer in charge. |
| 185 | Supply and fix in industrial socket metal clad plug and socket with MCBs single pole 20 Amp complteall as specified and directed by Engineer - in -Charge. |
| 186 | S & F in repairs sheet metal enclosure for double door DB made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mounted SP & N 8 ways, 240 Volts, ISI marked 200 amps bus bar stove enameled dust and vermin proof suitable for incorporation MCBs and isolators etc complete all as specified and directed by Engineer - in -Charge. |
| 187 | S & F in repairsMCB ‘C’ series type suitable for 240 volts, AC supply5 to 40 Amps , single pole & neutrtalwith over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in -Charge. |
| 188 | S & F in repairsMCB ‘B’ series type suitable for 240 volts, AC supply5 to 40 Amps , single pole with over load and short circuit protection and rupturing capacity not less than 10KA complete all as specified and directed by Engineer - in -Charge. |
| 189 | S & Fof sub-main wiring with two single core cables PVC insulated and un-sheathed 6 sqmm (Nominal Area) FRLSH stranded copper conductor drawn in and including steeldia 25mm “medium quality” conduit including 6.00 Sq mm (Nominal Area) copper cableas earthcontinuity conductor after chasing in wall and making good the disturbed surfaces and white wash or existing colour , necessary junction box and coversincluding necessary connections, PVCflexible pipes are used in pannel board while connecting the cablecomplete all as specified and directed by Engineer - in -Charge. |
| 190 | S&Fin replacement Sheet metal enclouser for doble door Vertical DBs made out of CRCA mild steel sheet surface with insulated material like polyester with epoxy powder coated surface mouting VTPN 4 Way 415 VoltISI marked 250Amps busbar stove enameled dust and vermin proof,IP:43 protection suitable for incorporation FP MCCB(V-Tech) N3 Frame upto 125A,Isolators and including give connection with wire and cable etc complete all as specified and directed by Engineer-in-Charge. |
| 191 | S&F in repairs MCCB 4 pole 63 Amps with breaking capcity 16kA ,Fixed TM and 415 volts AC Supply ISI marked complete all as specified and directed by Engineer - in - Charge. |
| 192 | M & L for Earthing complete with GI earth plate electrode 60 cm x 60 cm x 6 mmthick burried directly in ground (earth pit not less than 2.25 Mtr deep below ground level ) with top edge of plate not less than 1.5 Mtr below ground level , connecting to GI earth lead 4 mm dia GI earth wire ,by means of bolts,nuts and washers of GIand protection by provisionof GI medium grade pipe 15 mm bore including provision of concrete pit in PCC (1:2:4) type B1 using 20 mm grade stone aggregate with 40 mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4 gs /Sqmm ) and frame of angle iron 25mmX25mmX6mm with lugs 02 Nos and with 6 mm dia MS bar handle made to shape ,GI light grade 20mm bore pipe for watering perforated at the bottom 1.75 meter long placed ontop edge of earth plate common salt and charcoal filling test point made out of 40 mmX 8 mm FI with fixing arrangement ,funnel, wire mesh and earth work inhard dense soil ,returning filling in and removal of surplus soil to a distance not exceeding50 mtrs all as per electric plate no.3 of SSR part 1 and connecting to earth test point including taking out unserviceable earthing with all acessories all as specified or indicated including testing on completion all as specified and directed by Engr -In - Charge |
| 193 | Taking down old unsv existingLT cable of any capacity complete all as specified and directed by Engr-in-charge. |
| 194 | Supply and lay jointing and testing and commissioning in replacement of 35 Sqmm x 3.5 core XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable heavy duty multi stranded aluminium conductor & PVC sheathed LT cable 1100 V grade conforming to IS-7098 laid in trenches/ducts/fixed on poles wall/laid under roads/paths/drain/culverts or passing through pipes complete all as specified and directed by Engr-in-charge. |
| 195 | Excavation in trenches not exceeding 1.5 mtr wide and not ecxceedinf 1.5 mtr depth for laying of cables including taking up or down the LT cable complete all as specified and directed by Engr-in-charge. |
| 196 | Returning filling in including spreading levelling watering and well ramming in layers not exceeding 25cm complete all as specified and directed by Engr-in-charge. |
| 197 | Removal of Excavated material not exceeding 50 mtr and depositing where directed complete all as specified and directed by Engr-in-charge. |
| 198 | Supply and laying DWC pipe of outer dia size 77 mm and inner dia 63mm for laying of Lt cable complete all as specified and directed by Engr-in-charge. |
| 199 | Supply and lay GI pipe 50 mm light grade for cable protection in walls trenches or any situation including clamp nut bolt etc complete all as specified and directed by Engineer-in-Charge. |
| 200 | Boring of holes under road, pavement, hard standing by trenchless technology using ultra sounding technique and necessary machine for laying of DWC pipe of outer dia 90 mm complete all as specified. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
