Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store complete all as specified and directed by Engineer- in-Charge. |
| 2 | Taking down chowkatswith shutters(without taking off shutters from the frameexceeding 1.50 sqm each but not exceeding 4 sqm) removing to store complete all as specified and directed by Engineer- in-Charge. |
| 3 | Taking down shutter of any description exc 1 sqm and n exc 2.00 sqm each and removing to store yard complete all as specified and directed by Engineer- in-Charge. |
| 4 | Dismantling of boarding, any description, fixed in position with nail complete all as specified and directed by Engineer- in-Charge. |
| 5 | Refixing of shutter in same opening of any description exc 1 sqm and n exc 2.00 sqm each all as specified and directed by Engineer-in-Charge. |
| 6 | S&Fpowder coated anodized aluminum frame for doors, windows , ventilators with one of more rebates including joining cleat for fixing etc. complete all as specified and directed by Engineer- in-Charge. |
| 7 | S&Fpowder coated aluminumWindow/Ventilators shutter side hung type without sash, aluminum section weighing glazed clips, rubber packing anodized aluminum fittings such as peg stays 150 mm long (1 nos)hinges type B-21 100 mm long (2 Nos) suitable handle (1 Nos) complete all as specified and directed by Engineer- in-Charge. |
| 8 | Providing and fixing of Frame (127mm x 62mm) factory made uPVC white colour casement/sliding window/door, made of extruded profiles. Profiles of frames and sash will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc.. making arrangement for fixing of hardware, EPDM gasket, 1.2+ 0.2.mm thick galvanized steel profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, complete all as specified and directed by Engineer- in-Charge. |
| 9 | Providing and fixing factory made uPVC white colour casement (Openable) window made of extruded profiles with wall thickness of 2.3mm ( + – 0.2mm). Window profile with hollow section with multi chamber, frame (60mm x 58mm), sash (60mm x 73mm), T profile (One vertical length in between two shutters) (60mm x 74mm), Glazing bead (35mm x 20mm) will be mitered cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket 1.2 +– 0.2mm thick, galvanized steel Frame (28mm x 21.5mm), sash (31mm x 27.5mm). T profile (27mm x 17mm) to be inserted in required profile, frame will be fixed to the wall with 8 mm x 100mm long fasteners. Hardware: [casement handle made of zinc alloyed (white powder coated), But Hinges of\" zinc alloyed (white powder coated), transmission gear made of mild steel with multi point locking system] and 5mm thick glazing with selected quality glass complete all as specified and directed by Engineer- in-Charge.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net opening will be measured for payment purpose. |
| 10 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles dulyreinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mmsize for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixinghardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note : Glass shall be paid separately. |
| 11 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 12 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm (for single shutter) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately).Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. |
| 13 | All as per item No. 12 Above but of frame size 65 x 125 mm complete all as specified and directed by Engineer- in-Charge. |
| 14 | All as per item No. 12Above but of frame size 65 x 150 mm complete all as specified and directed by Engineer- in-Charge. |
| 15 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. Note : Stainless steel butt hinges shall be deemed to be inclusive in unit rate quoted of this item. |
| 16 | Providing and fixing 30 mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type skeleton door shutter open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, mesh etc.; and comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws all as per direction of Engineer-in- Charge. Note : Stainless steel butt hinges shall be deemed to be inclusive in unit rate quoted of this item. |
| 17 | S&F Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 18 | Material and labour for providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick PVC sheet (prelam) having one side decorative laminated sheet (for shutter, sides of cabinet, partition and shelves etc). All the edges of shutter and front exposed edge of partition/shelves shall be covered with 2mm thick edge bonding tape as per manufacturer. Including all required fixing material such as SS brackets, screws, adhesive etc., including taking out old any type cabinet complete all as specified and as directed by Engineer-in-charge.Note :- (i) The area of each sheet (shutter, sides of cabinet, partition and shelves)shall be measured in sqm for payment.(ii)Magnetic catcher, handles, continuous Piano hinges and PVC frame (where required) shall be measured and paid separately under appropriate item of BOQ.(iii) Any other material required for making/fixing/hanging of cabinet shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account. |
| 19 | S&F Aluminium handle cast type anodized 125 mm long complete all as specified and directed by Engineer- in-Charge. |
| 20 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 150 mm long complete all as specified and directed by Engineer- in-Charge. |
| 21 | S&F 100 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed all as specified and directed by Engineer-in-Charge. |
| 22 | S&F 200 mm long Aluminium anodized barrel tower bolt of extended section and fixedall as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repair 200mm long Aluminium anodized barrel tower bolt of extended section and fixed200 mm long all as specified and directed by Engineer-in-Charge. |
| 24 | S&F 150 mm long Aluminium handle cast type anodizedall as specified and directed by Engineer-in-Charge. |
| 25 | S&F in repair 150 mm long Aluminium handle cast type anodizedall as specified and directed by Engineer-in-Charge. |
| 26 | S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing boltsand sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer- in-Charge. |
| 27 | S&F in repair 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing boltsand sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed by Engineer- in-Charge. |
| 28 | S & F continous (Piano)type hinges mild steel bright finish or lectro galvanised with wide of flaps30mm complete all as specified and directed by Engineer- in-Charge. |
| 29 | S&F magnet ball catcher for cupboard shutter, complete all as specified and directed by Engineer- in-Charge. |
| 30 | S&F Aluminium door stopper of any description complete all as specified and directed by Engineer- in-Charge. |
| 31 | S&F 125 mm size hasp and staple,aluminium anodished,including bolt to hinge plate and fixed with screws, complete all as specified and directed by Engineer- in-Charge. |
| 32 | S&F in repair MS 300mm ordinaryrat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engineer-in-Charge. |
| 33 | Hacking out old broken glass (any size,thickness,quality or description from metal frame including punching or drilling out old glazing pins/spring clipscomplete all as specified and directed by Engineer- in-Charge. |
| 34 | S & F5.5mm thick sheet glass ordinary quality and glazing with oil putty in square not exceeding 0.50 sqm in each pane complete all as specified and directed by Engineer - in-Charge. |
| 35 | S & F 5.5 mm thick frosted glass and glazing with oil putty in square n exc 0.5 sq. m in each pane complete all as specified and directed by Engineer - in-Charge. |
| 36 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed by Engineer- in-Charge. |
| 37 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire stapels complete all as specified and directed by Engineer- in-Charge. |
| 38 | M&L applying two coats of synthetic enamel paint over a coat of red oxide 0r zinc chromate primer including preparation of new steel or iron surfaces exc 10 cm width or girth, complete all as specified and directed by Engineer- in-Charge. |
| 39 | M&L applying two coat of synthetic enamel paint on old decorated wooden surfaces exc 10 cm width or girth, including preparation of surfaces, complete all as specified and directed by Engineer- in-Charge. |
| 40 | M&L for applying one coat of synthetic enamel paint on old decorated steel surfaces exc 10 cm width or girth including preparation of surfaces , complete all as specified and directed by Engineer- in-Charge. |
| 41 | Demolitionof cement concrete ( un re-inforced) of any description in roofs, floors(other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed by Engineer- in-Charge. |
| 42 | Demolition of cement concrete (unreinforced) of any description and in any position/old existing felt/ plaster/tiles etc.including removal of demolished material out of defence land complete all as specified and directed by Engineer- in-Charge. |
| 43 | Demolition/taking out of mud from roofs, any thickness, including removing / cutting uprooting grass,vegetations and roots of small plants etc on roof and surrounding/parapit wall etc, including removing rubbish material from building and thrown in low lying empty area (as per direcction of AGE) at any distance upto 500 metres from the site complete all as specified and as directed by Engineer-in-Charge |
| 44 | M&L for levelling course for roof slab, Type B0, 1:2:4 (12.5 mm graded aggregate) using waterproofing compound (SBR) for maintaining proper roof slope and finishing cement concrete surface even and smooth wihout using extra cement complete all as specified.(Minimum thickness of concrete should not be less than 50mm at any point)Note : Waterproofing compound should be measured and paid seperately. |
| 45 | Supply of SBR waterproofing compound @ 2% ofper kg cement used complete all as speccified.Make : Fosroc/Sika/Choksey/Bostik/STP/Asian Paints/Berger Paints |
| 46 | OVERLAY- PU BASED ELASTOMERIC LIQUIED MEMBRANE SYSTEM FOR EXPOSED ROOF : Providing and applying polyurethane liquid roof waterproofing with improved water ponding capability, elastomeric high build liquid membrane for concrete roofs for exterior wall and exposed surface with solid content not less than 80% and solar reflective index not less than 106 as per (ASTM E1980-19)/tear strength ~20 N/mm (Free film, 14 days, +30 degree C) (ASTM D624) and tensile strength >= 2 N/mm2 (ASTM D4541), elongation 350 to 400% as per ASTM D412 and crack bridging ability upto 2mm.(a) After proper surface preparation, Apply one coat of Primer for PU coatingas per manufacturers specification.(b) Apply 1st coat of ShaliUrethane® BTD (white) @ 650 gm / m²(minimum) or equivalentby brush / roller while prime surface is tacky, Spread waterproofing reinforced Glass Fiber mash of 45 GSM with overlaps of 50 mm in both directions when the surface is still tacky. Allow 1st coat to dry. (c ) Apply 2nd & 3rd coat ofShaliUrethane® BTD (white) @ 650 gm / m² (minimum) or equivalent by brush/roller. Make : Fosroc/Sika/Choksey/Bostik/STP/ Asian Paints/Berger PaintsNote : (i) The Minimum dry film thickness (DFT) of roof treatment shall be 1.5mm if any shortfall in thickness of above treatment the same shall be achieved by additional coat. (ii) The procurement of material and execution of the work of water proofing treatment shall be carried out by authorised applicatorapproved by GE.(iii) The manufacturer/authorised applicator shall give a warranty for the performance & durability for 10 years. |
| 47 | M & L PCC 1:2:4, type B-1 , using 20mm graded stone aggregate as in kerbs or mud stops, rounded or chamfered on edges and similar work complete all as specified and directed by Engineer- in-Charge. |
| 48 | Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articlesall as specified.& directed by Engineer -in-charge.. |
| 49 | M&L machine cut kota stone slab flooring 16-18mm thick in single piece over cement screed base laid and jointed with grey cement mixed with pigment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6) complete all as specified and directed by Engineer- in-Charge. |
| 50 | M&L forkota stone slab flooring 16-18mm thickin single piecein riser of steps,skirting,dado and pillar laidand jointed with grey cement mixed with pgment to match the shade of the slab including rubbing and polishing complete inculding screed bed or bedding layer of mortar 15 mm thick CM (1:6) complete all as specified and directed by Engineer- in-Charge. |
| 51 | Cutting ,grinding ,cleaning and treating the surface of existing kota stone flooring with beeswax polishing complete as directed by Engr-in-Charge. |
| 52 | M&L16mm thick granite (of any type ) work (table rubbed and polished ) in cooking platform and likein 15mm thick cm (1:4) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shed of granite complete all as specified and directed by Engineer- in-Charge. |
| 53 | M&L for 16mm thick granite (of any type) work (table rubbed and polished) for wall lining (veneering to wall) 12mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed by Engineer- in-Charge. |
| 54 | Providing edge moulding to 16mm thick granitestone of counters vanities etc. including machine polishing to edge to give high gloss finish etc. complete all as specified and directed by Engineer- in-Charge. |
| 55 | Demolation of ashlar facings, dressed stone work, stone slabs or tiles from paving and precast concrete blocks and articlesall as specified.& directed by Engineer -in-charge.. |
| 56 | Taking down cement or cement lime plaster from brick walls etc including raking out joints, hacking for key scrubbing down with water etc complete all as specified and directed by Engineer- in-Charge. |
| 57 | M & L 10mm thick rendering in Cement Mortar 1:3 on fair facesof brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge . |
| 58 | M & L rendering 15mm thick on fair facesof brick work or concrete surfacesin CM 1:6 finished even & smooth without using extra cement all as specified and directed by Engineer - in - Charge . |
| 59 | M & L rendering 15mm thick on fair facesof brick work or concrete surfacesin CM 1:4 finished even & smooth without using extra cementadmixed with WPC in cement mortar all as specified and directed by Engineer - in - Charge . |
| 60 | Supply only liquid water proofing compound complete all as specified and directed by Engineer- in-Charge. |
| 61 | Treating apparent visible efflorescence by first cleaning using hard wire brush and all crystal deposits to be removed. The bricks shall then be cleaned using soft brush of powdery crystals removed. Then make a 1 to 4 solution of vinegar and water (1 part vinegar to 4 part water) and apply it to the afflorescence affected area using a nylon brush. Allow the vinegar/water solution to sit on the serface of the affected area for 15 minutes, but do not allow the solution to dry, Rinse the area with clean water using low pressure jet. Two cycle of cleaning using vinegar water solutions to be repeated complete all as specified and as directed. |
| 62 | M&L for the joints of briks to cleaned shall be pointed using cement putty made at site using sika latex/SBR polymer or equivalent diluted at retio of 1:4 with water. The solution to made shall be used to mix with cement to make a putty consistency paste. The cement putty shall be then work out in the joints complete all as specified and directed by Engineer- in-Charge. |
| 63 | M&L for the bricks so pointed shall be cleaned for all dust are deposit using brush. A undiluted single component acrylic polymer - Sika Raintite or equivalent to be used to prime the brick surface. The primer while being tacky the first coat of water proofing coating is done, Second coat is applied after a time interval of 4-6 hrs after the first has dried. The water proofing coating shall be two component polymer modified cementious coating - Sika Top Seal - 107, having a thickness of 1.5 mm in 2 coat. The material to be factory batched and ready to use. The two component shall be mixed using low speed drill having a RPM 350-450 and fitted with a paddle.The mixing to be done for 3-4 minutes to give a brushable consistency mix. The coating shall be done using 100-150 mm wide brush. It is to be take care that material while being used is agitated every 3-5 minutes to avoid powder part getting settled. The water proofing coating shall have below properties Tensile strength- 4.56 N/mm2 after 14 days exposure (According to ASTM D 2370 ) Bond Strength 2.0 N/mm2 at +27degree C (Failure in substrate). After application of second coat and while the material is still wet, coarse sand is sprinkled over the coating so as to ensure proper machanical key is provided for subsequent plaster complete all as specified and directed by Engineer- in-Charge. |
| 64 | M&L for plastering 15mm thick over the treated surface in CM 1:4 cement sand plaster added with acrylic polymer Sika Plastocrete Plus @ 3% by weight of cement finished even & smooth without using extra cement all as specified and directed by Engineer-in-charge. |
| 65 | M&L for complete removal of existing treatment and applying two coats of cement base paint on old decorated or undecorated wall surface including preparation of surfaces by washing rubbing down and stopping of distempered and painted surfaces complete all as specified & directed by Engineer-in-Charge |
| 66 | M&L for preparation of new plastered surfaces and applying two coats of cement base paint over a coat of alkali-resistant primer of approved shade on walls all as specified & directed by Engineer-in-Charge |
| 67 | M & L for preparation of old surfaces by complete removal of existing treatment of painted ceiling incl beams etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 68 | M & L for preparation of new surfaces ofceiling incl beams etc. and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 69 | M & L for preparation of old surfaces by complete removal of existing treatment of painted walls incl pillar etc. by mechanical equipments like electric wall sander/water jet machine and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 70 | M & L for preparation of new surfaces of walls incl pillar etc. and applying cement based putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and applying two coat of distemper with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat of alkali resistant primer complete, by mechanical means as per manufacturer\"s specification all as specified and as directed by GE. |
| 71 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), remving serviceable tiles to stores and and rubbish off the permises complete all as specified and directed by Engineer- in-Charge. |
| 72 | M & L for glazed ceramic coloured tiles 7mm thick 300 x 450mm size in vertical surface set and jointed in neat cement slurry and pointed in white cement paste pigmented to the shade over and including 10mm thick cement sand plaster (1:3) complete all as specified and directed by Engineer - in - Charge. |
| 73 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular ) joint free tiles area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqmand shall be jointed in neat cement slurry and pointed in paste pigmented to tile shadeover and incl 15 mm thick rendering in CM 1:4 complete all as specified and directed by Engr in Charge. |
| 74 | M&L Non skid ceramic coloured /printed tiles 7 to 8 mm thick( square /rectangular ) joint free tiles area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqmand shall be jointed in neat cement slurry and pointed in paste pigmented to tile shadeover and incl 15 mm thick rendering in CM 1:4 complete all as specified and directed by Engr in Charge. |
| 75 | M & L 25 mm thick Cement Concrete 1:2:4 type B–0 using 12.5mm graded stone aggregates flooring finished even and rough to receive topping layer all as specified and directed by Engineer - in – Charge . |
| 76 | M & L for 75mm thick cement concrete type D-2 (1:4:8) using 40mm graded stone aggregate as in sub floors, sub bases etc all as specified and directed by Engineer - in - Charge. |
| 77 | S&F in repairs stainless steel sink overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, complete all as specified and directed by Engineer- in-Charge. |
| 78 | S & F in repairs stainless steel plate rack of size 900x775x250mm of 1mm thick stainless steel of 1st Quality all as specified and directed by Engineer-in-Charge. |
| 79 | S&F stainless steel 25 mm dia drapery curtain rod with decoative end knobs complete with brackate and fixed to walls complete all as specified and directed by Engineer-in-Charge. |
| 80 | Disconnecting existing tanks, setting aside (lowering if required) for repairs, exc 250 nexc500 ltrcleaning, etc. and hoisting if required reconnecting and re-fixing in position.Note : Cleaning repairing will be measured separately. |
| 81 | Disconnecting existing tanks, setting aside (lowering if required) for repairs, exc 500 nexc1000 ltr cleaning, etc. and hoisting if required reconnecting and re-fixing in position.Note : Cleaning repairing will be measured separately. |
| 82 | Dismantling water tanks and removing to store of 1000 ltr capacity complete all as specified and directed by Engineer- in-Charge. |
| 83 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top) hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples,complete all as specified in SSR Part I complete all as specified and directed by Engineer- in-Charge. |
| 84 | M&L in repair ball valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball with minimum weight 210 gm screwed for 25mm bore iron pipe supplied and fixed complete all as specified and as directed by Engineer-in-charge. |
| 85 | S&F in repair gun metal globe or gate valve with iron wheel screwed both ends for iron pipe of 20 mm dia complete all as specified and directed by Engineer- in-Charge. |
| 86 | Material and labour for water proofing treatment to sunken slab and adjoining vertical surfaces as per any of the following method complete all as directed by Engineer-in-charge/GE. :- Method 1(A) Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, Smart Care Damp proof 2K, having 100% elongation as per ASTM D412, resisting 5 bars hydrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per DIN 1048, crack bridging upto 1.2mm as per ASTM 4548.5 Clean all working surface & made free from dirt, grease laitance etc. After inspection for all working area rough surface, cracks & construction joint are treated by polymer modified mortar of 1:1:4 (1 Cement : 1Polymer : 4 Sand). Making Gola of size 75x75mm at junction of vertical & horizontal with the polymer modified mortar of 1:1:4 (1 Cement : 1 Polymer : 4 Sand). The coating shall be terminated at 300mm on vertical walls. The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing and shall have consumption of 1.5kg/sqm per coats, etc, complete as per manufactures specifications.B) Bore Packing : All the borehole gaps between concrete surface and pvc pipe of various dia upto the neck level shall be filled with non-shrink free flow grout – Smart Care GP Grout or approved equivalent having dual shrinkage compensation property. Before the bore packing, surface of the pvc pie and concrete surface will be made rough and sand will be sprinkled with polymer bonding agent.(C) Apply12-15mm plaster on slab and vertical surface admixed with Smart Care Vitalia Neo @200ml per bag of cement.Method 2(A) Supplying and applying two component cementitious & acrylic flexible water proofing & protective coating, two coats with 1mm DFT, having Hydrostatic (positive) water pressure resistance (DIN 1048) is 7. Abrasion resistance, cm/km is 0.09 of Dr Fixit Pidifin 2k @ 1.5kg/sqm with a paint brush over existing roof surface. The Polyester reinforced coated net of 45g/sqm, 2.5mmx2.5mm is laying on the surface immediately on the first coat of two component modified polymer Dr Fixit pidifin 2k or equivalent. After removal of all lose materials like dust etc. with wire brush coir brushes from roof surface to get absolutely cleaned surface free of foreign contaminant filling of crack and patches with polymer based repair mortar/micro concrete, after the repairing work making the gola on surrounding wall’s junction and seal the vertical walls up to 300mm. In case of core cutting on the surface, the joint is seal with non-shrink grout.(B) Apply12-15mm water proof plaster on slab and vertical surface admixed with Dr Fixit pidiproof LW+ @200ml per bag of cement before treatment.Note : (i) Work shall be executed through specialized agency (ii) The treatment shall be carried outas per the manufactures instructions and as directed by the Engineer in charge. The name of firmshall be got approved from CWE before carrying out the work.(ii) The Plan area of floor shall be considered for payment.(iii) PCC filling under sunken area will be measured & paid separately.Make : Method 1 (Asian paint)/ Method 2 (Dr fixit) or Techno commercial equivalent in Fosroc/Sika/STP |
| 87 | M & L PCC (1:5:10)using 40mm graded burnt bricksaggregate as in foundation filling & mass concrete or as in shunkenfloor complete all as specified and directed by Engineer- in-Charge. |
| 88 | Taking down eves and gutter and rain water of any size all as specified and directed by Engineer - in - Charge . |
| 89 | Dismantling of CI pipes or reinforced concrete pipes 100 mm dia fixed to wall etc complete all as specified and directed by Engineer- in-Charge. |
| 90 | Dismantling of CI pipes or reinforced concrete pipes 75 mm dia fixed to wall etc complete all as specified and directed by Engineer- in-Charge. |
| 91 | Supply&fixing110mmborePVC(SWR)pipessinglesocketed(pressureratingnotlessthan 6kg/sqcm)inanylengthwithrubberringjointsfordrainorrainwaterfixedalongwallswithand including PVC clamps, complete all as specified and as directed by Engineer-in- charge. |
| 92 | S&F 110mm PVC (SWR) pipes single socketed(pressureratingnotlessthan 6kg/sqcm)in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed by Engineer- in-Charge. |
| 93 | Supply&fixing75mmborePVC(SWR)pipessinglesocketed(pressureratingnotlessthan 6kg/sqcm)inanylengthwithrubberringjointsfordrainorrainwaterfixedalongwallswithand including PVC clamps, complete all as specified and as directed by Engineer-in- charge. |
| 94 | S&F 75mm PVC (SWR) pipes single socketed(pressureratingnotlessthan 6kg/sqcm)in any length with rubber ring joints laid in trenches or in floors, complete all as specified and directed by Engineer- in-Charge. |
| 95 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor110mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 96 | Supply&fixingPVC(SWR)bends(anyradius)suitablefor75mmborepipecompleteallas specified and as directed by Engineer-in- charge. |
| 97 | Supply&fixingPVC(SWR)floortrap,plainwithgrating,suitablefor100/75mmborepipeincluding jointing with solvent cement complete all as specified and as directed by Engineer-in- charge. |
| 98 | Supply and fixing PVC (SWR) reducer 110/75 complete all as specified and as directed by Engineer-in-charge. |
| 99 | Supply & fixing PVC (SWR) vent cowl suitable for 75mm bore PVC pipe complete all as specifiedand as directed by Engineer-in- charge. |
| 100 | Supply & fixing 110mm bore PVC (SWR) branch piecesingle (single Y) equal or unequal fixed with solvent cement,complete all as specified and as directed by Engineer-in- charge. |
| 101 | Supply & fixing 110mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 102 | Supply & fixing 75mm bore PVC (SWR) junction single (single T) equal or unequal fixed with solvent cement, with access door complete all as specified and as directed by Engineer-in- charge. |
| 103 | S&F 110mm PVC(SWR) sanitary connection socket to fit out let of WC complete all as specified and directed by Engineer- in-Charge. |
| 104 | S&F 110mm PVC(SWR) coupler complete all as specified and directed by Engineer- in-Charge. |
| 105 | Taking up or down steel tubing of 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer- in-Charge. |
| 106 | Taking up or down steel tubing of 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed by Engineer- in-Charge. |
| 107 | S&F Chlorinated PVC (CPVC) pipes 20 mm outer dia, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.0 m spacing . this includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete all as specified and directed by Engineer- in-Charge. |
| 108 | Supply & fixing mild steel tubes of size 20 mm bore (medium grade) galvanised with all fittingsand fixed complete to wallcomplete all as specified and directed by Engineer- in-Charge. |
| 109 | S&F 32mm bore for discharge pipe Bottle trap of PTMT having minimum water seal of 25mm .(Minimum weight 32mm-260gms/ 40mm-270 gms) complete all as specified and directed by Engineer- in-Charge. |
| 110 | S & F in repairs vitreous china Half stall urinal back white, providing and fixing plugs,bedding urinal agianst wall in cement mortar 1:2,securing urinal to plugs with and including 60mm long brass screws,pointing around urinal back in cement ,fixing automatic flusing cistern with brackets,flush pipe ,grating,water spreaderand union for discharge pipe complete all as specified and directed by Engineer- in-Charge. |
| 111 | S&F in repair vitreous china squatting pan, Orissa Pattern size 580mm x 440 whitewith integral foot rest and ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position and embedded lean/lime concrete bedding complete all as specified and directed by Engineer- in-Charge. |
| 112 | S&F in repairs wall mounted vitreous china wash down water closet pan padestel pattern white including connection pipe to union of flushing cistern, inlet and overflow pipes,connecting only to flushing cistern anti-syphonage pipe with PVC flush pipe of 32mm dia and including Jet spray and plastic seat cover with mild steel chromoum plated hinging and \"P\" or \"S\" trap device complete all as specified and directed by Engineer-in-Charge. |
| 113 | S&F in repair health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed by Engineer- in-Charge. |
| 114 | S&F in repair PVC concealed type flushing cistern set of capacity 10 ltr with half frame including all fixing accessories and knob fixed in wall and including flush pipe of PVC 32mm bore and connection to WC pan making good dismantled portion of wall complete all as specified and directed by Engineer- in-Charge. |
| 115 | S & F in repairs PVC 10 ltrs syphonic action type flushing cistern, low level with inlet, ball valve, float and handle including brackets, flush pipe of PVC 32mm bore and connection to WC pan complete all as specified and directed by Engineer- in-Charge. |
| 116 | S & F in repair vitreous china white oval shaped wash basin of size 550 x 400 mm including padestal, brackets,waste fitting 32 mm brass chromium plated complete all as specified and directed by Engineer- in-Charge. |
| 117 | S&F PVC waste pipe 32mm dia & 90 cm long complete all as specified and directed by Engineer- in-Charge. |
| 118 | S&F in repair 600mm x 450mm beveled edge mirror of selected quality glass on 6mm thick commercial plywood and fixed wooden plugs with chromium plated brass screw and cup washes complete all as specified and directed by Engineer- in-Charge. |
| 119 | S&F in repair bib taps long body, 15mm bore dia, fancy type, cast copper alloychromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe complete all as specified and directed by Engineer- in-Charge. |
| 120 | S & F in repairs 15mm bore CP Angle cock one waychromium plated, high pressure, with crutch or butterfly handle, screwed both ends of iron pipe or for union and fixed complete all as specified and directed by Engineer- in-Charge. |
| 121 | S&F in repairs 15mmstop valves fancy type, chromium plated with long shank and cup (concealed type) ,cast copper alloy, screwed down, high pre-ssure, with crutch or but-terfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed by Engineer- in-Charge. |
| 122 | S & F in repair brass chromium plated central hole basin mixer with regular spout , popup waste system and 450mm long braided hoses with connection and nuts completeall as specified and directed by Engr-in-charge. |
| 123 | S & F in repairs brass chromium plated wall mixer with for mixing hot and cold water screwed down for iron pipe and fixed as directed by Engr-in-charge |
| 124 | S& F in repairs for brass chromium plated shower rose 150 x 150 mm size with swivel joint including fixing to 15 mm dia steel pipe or union complete all as specified and directed by Engineer- in-Charge. |
| 125 | S & F soap dish brass chromium plated, fixed to plugs with brass chromium plated screws complete all as specified and directed by Engineer - in - Charge |
| 126 | S & Fbrass chromium plated tubular towel rail 20mm dia “D” type 60 cm long between flanges incldg brackets complete all as specified and directed by Engineer - in - Charge . |
| 127 | S&F in repair CP grating suitable for 75/100 mm bore floor trap and fixed with white cement complete all as specified and directed by Engineer- in-Charge. |
| 128 | S&F in repair PVC connection both side brass unions internal for size 15mm dia and 600mm long all as specified and directed by Engineer-in-Charge. |
| 129 | S&F Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified and directed by Engineer- in-Charge. |
| 130 | Demolition of reinforced cement concreteof any description and in any position not otherwise specifically provided for complete all as specified and directed by Engineer- in-Charge. |
| 131 | M & L RCC 1:1½:3, (nominal mix), Type A-1, using 20mm graded aggregates as in chajjas, fins, fascias,shelves , louvers, parapets and railing etc and the like including necessary formworks all as specified and directed by Engineer - in - Charge. |
| 132 | S&F TMT bars 10mm dia and over, cut to length, bent to shape required,including binding with mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed by Engineer- in-Charge. |
| 133 | Demolition of brick work or stone masonry built in cement mortar including all quoins, pillars, arches etc. but excluding ashlar facings, dressed stone work and precast concrete articles, complete all as specified and directed by Engineer- in-Charge. |
| 134 | M&L brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6 all as specified and directed by Engineer - in - Charge. |
| 135 | Demolitionof cement concrete (un re-inforced) of any description in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed by Engr-in-Charge. |
| 136 | M&L 50mm thick PCC1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection, surface finished even smooth without using extra cement complete all as specified and directed by Engineer- in-Charge. |
| 137 | Dismantling framed work of timber scantlings 40 sq. cm and over in any position complete all as specified and directed by Engr-in-Charge. |
| 138 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engr-in-Charge. |
| 139 | S&F Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer- in-Charge. |
| 140 | S&F Structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes grade St-240 complete all as specified and as shown on drawing complete all as specified and directed by Engineer- in-Charge. |
| 141 | S & F framed work such as grills,cooler stand ,ladder grating and sun shed etc., with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work or water tanks and similar work conforming toFe 410-0 or Fe 310-0 complete all as specified and directed by Engineer- in-Charge. |
| 142 | Shortcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix(minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characteristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound/weak concrete material 25mm average thickness from slabs, beams, columns etc with manual chisel and/or by standard power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@6 sqm/ltr at DFT of 100 microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge.Note : After completion of shorcreting the splash of cement on wall to be cleaned completely. |
| 143 | M&L for Shotcreting 25MM thick in RCC Facias, beams n.exc 450in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characterristic compressive strength (with ordinary portland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 50mm average thickness from RCC Facias, beams with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specificationsincluding fixing hard drawn steel wire fabric not exceeding 4 Kg / Sqm cut to lengths, bent to shape required and disposal of debries for all lead and lifts complete all as specified and directed by Engineer-in-Charge |
| 144 | S & F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and typing with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcement all as specified & directed by Engineering-in-Charge. |
| 145 | M & L forproviding and injecting chemical emulsion for post constructional antitermite treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.50 Ltrs per Sqm of the vertical surfaces of the sub-structure to a depth of 300 mm including excavating channel along the wall and rodding etc. complete all as specified and directed.Note : Quantity will be measured perimeter of wall x depth of penetration. |
| 146 | Taking down carefully existing aluminium/Copper point wiring light, fan socket or power bell complete with fitting such as sockets, ceiling roses, pendants batten holders regulators socket, call bells & making good to the disturbed surfaces of walls, matching the colour with existing Surface complete all as specified and directed by Engineer- in-Charge.Note: Rate for making good shall be deemed to be included in above item rate. |
| 147 | Taking down unserviceable main switches and MCB distribution boards single phase complete all as specified and directed by Engineer- in-Charge. |
| 148 | Material and labour for concealed Point wiring for one light point/fan point /bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area)single core FRLSH PVC insulatedunsheathed and multi strand copper conductor cable 1100 volt (ISI marked)drawn through andincludingPVC conduit 20 mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes,with Chromium plated brass screws & washersfittings and for 2mm thick galvanised steel pressed sunken box suitable for modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches/ socket / regulator etc, including provn of 2.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. by using CM (1:3)complete all as specified and as directed. Note :- Switch, socket, regulator shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. |
| 149 | All as per Item No.148 above here in before but for One three pins 5 Amps switch socket outlet point on independent board with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly dolly complete all as specified and directed. (socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). |
| 150 | All as per Item No.148 above here in before but for One three pins 5 Amps switch socket outlet point on same board with other switches with 2.5 Sqmm Copper incl 2.5 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dollycomplete all as specified and directed.(socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). |
| 151 | All as per Item No. 148 above here in before but for One light point controlled by two 2-way switches of 5 amps (switch shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. ). |
| 152 | Description all as per item No. 148 above here in before but for 15 amps socket outlet with 4 Sqmm Copper incl 4.0 Sqmm PVC insulated copper conductor cable as earth continuity conductor and connecting to common earth dolly complete all as specified and directed.(switch, socket shall be measured and paid separately under appropriate item of BOQ as supply only but cost of labour for fixing the same shall deemed to be included in the unit rate. |
| 153 | Supply only modular switch 5/6Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be includedin point wiring item of BOQ. |
| 154 | Supply only modular switch 5/6Amps, single pole, two way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be includedin point wiring item of BOQ. |
| 155 | Supply only modular Socket outlet multipurpose type 6 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be includedin point wiring item of BOQ. |
| 156 | Supply only modular Socket outlet multipurpose type 6/16 Amp, flush type (2 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be includedin point wiring item of BOQ. |
| 157 | Supply only modular switch 6/16Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be includedin point wiring item of BOQ. |
| 158 | Supply & fixing PVC Lamp holder suitable for and including batten fittings ,LED Electric lamp 9 Watt with backalite 20mm back plate complete all as specified and directed by Engineer- in-Charge. |
| 159 | M&L for Ceiling Rose, surface bakelite 12 to 3 terminal, 240 volts, 5 Amp ISI marked complete all as specified and directed by Engineer- in-Charge. |
| 160 | S & F of MCB suitable for 240 volts AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 KA and 6 to 32 Amps complete all as specified and directed by Engineer- in-Charge. |
| 161 | S & F of MCB suitable for 240 volts AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 KA and 16 to 40 Amps complete all as specified and directed by Engineer- in-Charge. |
| 162 | S & F of RCCBs suitable for 240 volts AC supply, double pole 25A, 30mA with earth leakage protectioncomplete all as specified and directed by Engineer- in-Charge. |
| 163 | S& F plug and socket type DB (Functional unit)20 Amps capacity with provision of single pole 20 amps MCB,plug top and earth plug,grouted flush to walls complete all as specified and directed by Engineer- in-Charge. |
| 164 | S&F Electric bell ding dong complete all as specified and directed by Engineer- in-Charge. |
| 165 | Supply only modular Bell Push switch, 5Amps, single pole, one way (1 module) complete all as specified and as directed by Engineer-in-charge.Note :- Inner/Outer plate for fixing the switch shall be includedin point wiring item of BOQ. |
| 166 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 12 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB\"s and isolators etc complete all as specified and directed by Engineer- in-Charge. |
| 167 | S&F Distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with powder coating surface mounting SPN 8 way 240 volts with bus bar rating 200 Amps dust and vermin proof suitable for incorporation of MCB\"s and isolators etc complete all as specified and directed by Engineer- in-Charge. |
| 168 | S&F sheet metal enclouser VTPN/HTPN DB having facility to fix MCCBincomer upto 125 Amps and MCBs in outgoing, TPN 4 ways, Double door type complete fitted with bus bars, neutral links, IP-43 protection Isolated Neutral bar,door earthing,cement spill protector,insulated bus bar assembly and blanking plates including making good disturbed surfaces after taking out old unserviceable DB complete all as specified and directed by Engineer- in-Charge. |
| 169 | Supply and fixing MCCB TPN ( 4 pole) 100 Amps 415 Volts of braking capacity 16 KAcomplete taking down old unserviceable one and making necessary connections as existing ls with CTC solutions complete all as specified and directed by Engineer- in-Charge. |
| 170 | All as per Ser Item No. 169 above here-in-beforebut 100 Amps with braking capacity 16 KA complete all as specified and directed by Engineer- in-Charge. |
| 171 | S&F and testing LED light fitting 1x18watt 4 feet long including LED tube with driver complete suitable for fixation on wall/roof with body robust, corrosion resistant, superior finish and without any cracks or through h oles. The system wattage of fitting should not be more than 18 watt= 10%, surge protection of minimum 2 KV power factor should be more than 0.90 cool while colour, total hormonic distoration (THD) should not be more than 15% lumen output should not be less than 1700 lumens, total input voltage range 140-280V AC, colour rendering index should not be less than 80, Corelated colour should be minimum 6000 degree Kelvin complete all as specified and directed by Engineer- in-Charge. |
| 172 | S & F LED backup/Rechargeable tube light polycarbonate housing 1x18/20 watt, appx 4 feet long module complete all as specified and directed by Engineer- in-Charge. |
| 173 | S&F for WEE Plus LED bulk head luminaire of capacity 10 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65 complete all as specified and directed by Engineer- in-Charge. |
| 174 | S&F for WEE Plus LED building security light luminaire of capacity 35 Watt an ideal energy efficient solution for upgrading conventional GLS bulkhead luminaires to LED bulk head IP 65/66 complete all as specified and directed by Engineer- in-Charge. |
| 175 | Supply and fixing bracket made out of GI tubing light grade 25mm dia, 1.5 metre long bent to shape at 120 degree angle at half metre from bottom, including two Nos clamps made out of MS Flat iron of size 25x4 mm with suitable nuts and bolts for holding/fixing of bracket on steel pole including painting to MS clamp and nut bolts with two coats of aluminium paint over a coat of red oxide primer, complete all as specified and directed by Engineer-in-Charge. |
| 176 | M&L forsubmain wiring comprisingsingle core ,2 Runs of 6 sqmm nominal cross sectional areamultistranded copper conductor cable, PVC insulated unsheathed 1100 Volts gradedrawing in and including appropriate dia. PVC conduits heavy duty and conduit fittings/existing concealed conduit complete,including provision of 1 x 6 sqmm nominal cross sectional areamultistranded copper conductor cable PVC insulated unsheathed 1100 Volts grade as earthwirecomplete incl taking down old UNSV sub main all as specified.Note :- Extra length of cables/ wire required for connection to MCBs shall not be measured and the rate quoted by contractor for per unit shall be deemed accordingly) |
| 177 | Supply and hanging /fixing ceiling fan 1200 mm sweep AC Supply (Input Voltage Range ; 120 to280V), BLDC type, 5 star rated, BEE and ISI Marked super enamelled, copper winding of \"B\" class insulation, single phase, maximum 26W (± 10%), Temperature rise 40 degree maximum with remote, 03 No blades, down rod including accessories, white colour, total harmonic less than 10%, 5 speed, hanging in position including making connection with flexible cord three core twisted copper conductor of suitable sizefrom ceiling rose to fan complete all as specified Note :- (i) Down rod must be 2.5\" in lieu of standard rod with ceiling fan (ii) Serial Number as issued by Engr-In-Charge of celing fan and GE Office name shall also be written on fan with red colour permanent marker and fixing of regulator on switch board, cost for the same shall deemed to be included in the quoted unit rate nothing extra shall be paid on this account(iii) old US ceiling fan to be deposited in MES yard. |
| 178 | M& L for Fasteners hook heavy duty and hook length is not more than 12\"capacity for ceiling fan to be fixed in the ceiling with suitable tools complete all as specified and directed by Engineer- in-Charge. |
| 179 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element up to 2 KW capacity 25 litre,BEE 5 Star rated complete with all accessories such as safety valve,thermostate,NRV, connection piece etc complete all as specified and directed by Engineer- in-Charge. |
| 180 | M&L for making holes for Exhaust fans/Air freshener for size of 450/250/230mm dia as per requirment of location and filling the old holes with suitable material and making good surface and finishing, painting with existing colour and cleaning the stie complete all as specified and directed by Engineer- in-Charge. |
| 181 | Supply and fixing Exhaustfan metal body body, AC single Phase 230V, size 450mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.5 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and directed by Engineer- in-Charge. |
| 182 | Supply and fixing Air freshener fanPVC body, AC single Phase 230V, 50 Cycle per second, size 250mm sweep with blades and frame including self closing GI louvers off mode protection against birds etc mounted in suitable opening arrangement and connecting up and including three core PVC Insulated PVC Sheathed copper conductor flexible cable1.0 Sqmm drawn in flexible PVC conduit and hanging on wall with 4 Nos steel fastners 10mm dia 100mm long and making good the disturbed surface complete all as specified and as directed by Engineer-in-charge. Note: Old US Air freshener fan to be deposited in BSO yard. |
| 183 | S & F XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 16 sq. mm 4core complete all as specified and as directed by Engineer-in-charge. |
| 184 | M & L for boring hole across the Road/plinth/hard standing by trench less technology method suitable for 100mm bore pipe for 0.4 mpa working pressure for cable passing without damaging Road / Plinth /Floor with 80mm GI pipe complete all as specified and directed by Engineer- in-Charge. |
| 185 | Excavation in trenches in any type of soilnot exceeding 1.5 mtr deep and notexceeding 1.5 mtrwide for laying of cables, RCC/Steel tubular poles/staysand struts etc getting outincluding trimmingsides and forming bottom surface complete all as specified and directed by Engineer- in-Charge. |
| 186 | Returning, filling in including spreading, leveling, watering and well ramming excavated soilin layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested, complete all as specified and directed by Engineer- in-Charge. |
| 187 | Removal of excavated surplus material to a distance n. exc. 50 mtr away in layer n. exc. 25cm from the starting point all as direcet by Engr-in-Charge. |
| 188 | Supply and fix light grade 50mm GI pipe fix complete to Wall , Poles etc with suitable clamp for protection of cable complete all as specified and directed by Engineer- in-Charge. |
| 189 | Supplying and laying DWC pipe for cable of outerdiameter 77 mm and inner diameter 63 mm complete all as specified and directed byEngr - in charge |
| 190 | S&F 25 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, brenches complete allas specified and as directed by Engineer-in-Charge.. |
| 191 | S & F stop valve size 25 mmcast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 192 | S&F 20 mm bore Galvanised iron tube medium grade with all fitting fixed concealed complete to walls and ceiling or laid in floors, brenches complete allas specified and as directed by Engineer-in-Charge.. |
| 193 | S & F stop valve size 20 mmcast copper alloy screwed down high pressure with crutch or butterfly handle screwed both end for iron pipe or for unions and fixed complete all as specified and directed by Engineer-in-Charge. |
| 194 | Supply, install,commissioning and testing of commercial Air curtain unit for prevention of dust and conditioned air losses, single phase, 220 V, 50HZ, made out of MS/CRCA sheet of minimum thickness 18 gauge finished with two coats of red oxide primer and final coat of synthetic enamel paint (oven baked) with MS -CRC 18 gauge square perforated suction grills, Aluminium alloy fans and single phase electric motor, nozzles etc, complete with fittings and accessories so as to produce 1 - 1.5 m/sec air velocity at floor level for door opening size of 4 ft complete all as specified and directed by Engineer- in-Charge. |
| 195 | Supply , fixing,testing and commissioning of electrical chimney (90CM) with features of filterless & autoclean technology,oil collector tray,inbuilt light,digital display,noise level 46 dB, 304 Watt motor capacity with copper winding extra installation kit , air suction capacity 1400 cum/h, input voltage range 220-240 volts,50 Hz and fitting in wall as concealed or duct complete all as specified and directed by Engr-in-Charge. Make :-Sunflame, Glen, Bosch. |
| 196 | supply and fixing of ss vent cowl cover6\" inch stainless steel material, anti cockroach, dust and insect control for kitchen chimney, anti-insect mesh, rust proof & weather resistant , installed with chimeny pipe mount and including cutting chases in wall and making good disturbed surfaces of walls/ceiling/floors etc. complete all as specified and directed by Engr-in-Charge |
| 197 | Supply and fixing of premium chimney aluminium flexible type duct size6\" inch diameter and stretching before and after ratio in feet1:5suitable for electric chimney, install with walls/ceiling including all fitting suitable material complete all as specified and directed by Engr-in-Charge |
| 198 | Earthing complete with galvanised steel earth plate electroe 60 cmx60cm6mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connectedto and including galvanized earth lead GI Strip of size 32x6mm by means of GI bolt/snuts/washers, protected by 40mm bore GI light grade pipe from earth plate & upto 3m long pole fixed with 2 clamp made from mild steel flat iron 32x6mm bolts, nuts, washer etc. earth plate shall be surrounded by alternate layer of charcoal or coke and common salt 15cm thick all around buttom and top of earth plate 20mm dia GI Medium grade pipe for watering and including funnel, wire mesh, RCC cover & frame PCC 1:3:6 type C1 using 20mm graded stone aggregate as in earthing pit including necessary excavation & earth work all as specified & shown on electrical plate No. 3 of SSR Part-I complete all as specified and directed by Engineer- in-Charge. Note: (i) PCC chamber shall be constructed at least 1.5 mtr away from the earth electrode and pipe for watering shall be provided in slanting manner (ii) earthing for Lightning protection is also included in the above item) |
| 199 | Dismantling and taking down of existing solar heating system along with connected items viz Flat collector plate, master solar plate, hot water tank, pipelines all types, valves , including iron stand and other items and refixing the same with necessary repair to the solar heating system items and leakage of pipelines and making the solar system functional all as directed by Engr-in-Charge. Note : 1. Replacement of heating element of 2 KW,thermostat and replacement of tank deemed to be included in the unit rate quoted by contractor. 2. Any leakage of incoming and outgoing pipeline connected to solar system to be repaired or if necessary replacement upto 20 Mtr of 20 mm GI pipes deemed to be included in the unit rate quoted by contractor. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
