|
| 1 | Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 mtr in depth & getting out in soft soil complete all as specified and directed. |
| 2 | M&L PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in foundations, fillings and Mass concrete complete all as specified and directed. |
| 3 | M&L RCC (Design mix) M-25 (using 20mm graded stone aggregate) as in foundations, including rafts, footings, foundation beams, plinth beams, bases for columns, etc. basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 4 | M&L RCC (Design mix) M-25 (using 20mm graded stone aggregate) as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 5 | Use & waste formwork for rough finished surfaces to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beam and similar work; vertical or to batter complete all as specified and directed. |
| 6 | Use & waste formwork for rough finished surfaces to sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed. |
| 7 | M&L of Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 10mm dia and over, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 8 | M&L of Reinforcement TMT Steel bars of grade Fe-500/Fe-500 D of 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required, incl cranking,bending , spirally for hooping for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clip complete all as specified and directed. |
| 9 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:3) 12mm thick including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed. |
| 10 | S&F of Joist, channel, angle, or tee sections, ISMB ofFe-410- W(Gde- E-250) quality- B 7M long welded to guesset plated and fixed with nut & bolts at the height of upto 3m in one piece only coplete all as specified and directed by Engr in Charge. Note :- The cost ofnecessary arrangement of Hydra/Crane, safety equipmemt and trafic control etc to be deemed to be includued in the quoted rates. |
| 11 | S&F of Framed work as in doors or gates of angle or other section with gusset plates, rails braces, etc Fe-410- W(Gde- E-250) quality- B., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 12 | S&F Mild steel Anchoring bolts purpose made with hexagonal or square head one end and screwed the other, or screwed both ends; each screwed end to be fitted with washers and one hexagonal or square nut. exc 30cm long but n exc 1.50m long complete all as specified and directed. |
| 13 | S&F of MS work of Fe 410-W (Gde 250) for box type pintels higes for gate, locking arrangement, Monkey tail bolt, roller with roller plate of 550 x 50 x 5mm Tee and welded to MS gate shuttercomplete all as specified and ditected. |
| 14 | S&F of 50mm wide reflective/Retro tape high intensity weather resistance of approved colour complete all as specified and directed by Engr in charge. |
| 15 | M&L for preparation of New or previously untreated steel or iron surfaces of any description, not otherwise, described, over 10cm width or girth and painting with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 16 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed. |
| 17 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point ® complete all as specified and directed. |
