|
| 1 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) n. exc 1.50 sqm in each complete all as specified & directed. |
| 2 | Taking down chowkhats or frames with shutter (without taking off shutter from the frame) exc 1.50 sqmbut n exc 4 sqm in each complete all as specified & directed. |
| 3 | Taking down shutter of any description, exc 1.0 sq.m but n.exc 2.00 sqm each. |
| 4 | M&L for mild steel work as in door chowkhat of angle iron including necessary cutting and welding conforming to Fe-290 or Gde E-165, complete all as specified and directed |
| 5 | M&L for mild steel work as in holdfasts, knee piece and similar small article confiraming to Fe-290 or Gde E-165 complete incl necessary plaster, putty and painting work on wall and making good all as specified and directed. |
| 6 | S&F Second class hard wood Palin, solid, straight as in chowk at and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed. |
| 7 | S&F 35mm thick Flush shutters, soild core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed |
| 8 | M&L 35mm thick 2nd class hard wood Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. |
| 9 | S&F 19mm thick Flush shutters, solid core construction, with block board ISI marked confirming to IS:1656-2004 with latest amendments & pasted 0.90mm thick mica sheet adhesive used Phenol and pressed by hot pressed on both face of approved shade & colourcomplete incl taking down old wooden shutter of any type complete all as specified and directed. |
| 10 | S&F solid PVC door frame of size 50mm X 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tubes suppling & fixing in opening, as per specifications and drawing complete incl necessary plaster, putty and painting work on wall and making good or as directed by Engineer-In-Charge. |
| 11 | S&F factory made solid PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for bottom and top rails. MS frame shall be covered heat moulded plain colour PVC \"C\" channel having PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling for plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at the site as per specification. |
| 12 | All as per Item No 10.00 above but wood grain printed PVC Sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 13 | All as per Item No 11.00 above but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading complete all as specified and directed. |
| 14 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete with glazing bars dovetailed or welded complete incl necessary plaster, putty and painting work on wall and making good all as specified and dirceted. |
| 15 | S&F steel window with side hung shutter including projecting type hinges with steel handle and steel peg stay complete without glazing bars dovetailed or welded complete incl necessary plaster, putty and painting work on wall and making good all as specified and dirceted. |
| 16 | M&L for Steel Ventilators, Fixed type shutters, with glazing bars complete incl necessary plaster, putty and painting work on the wall and making good all as specified and directed. |
| 17 | S&Ffor framed work such as grills with ends of bars shouldered and/or riveted or forged into spikes, MS flats, framed guard bars & similar work etc complete conforming to Fe 290 .Gde-E-165. |
| 18 | S&F 50 mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed. |
| 19 | S&F 75mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed.. |
| 20 | S&F 100mm size stainless steel butt hinges medium weight cold rolled complete all as specified & directed.. |
| 21 | S&F 150mm long extruded Aluminium alloy handle febricated type anodised complte all as specified & directed. |
| 22 | S&F 75mm long Aluminium Anodised tower bolts of extruded section and fixed all as specified |
| 23 | S&F 150mm long Aluminium Anodised tower bolt of extruded section and fixed all as specified |
| 24 | S&F 250mm long Aluminium Anodised tower bolt of extruded section and fixed all as specified |
| 25 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy and fixed complete all as specified and as directed. |
| 26 | S&F Hasp & staple, aluminium 100mm size complete all as specified and directed. |
| 27 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames, glazed with putty or fixed with beads complete all as specified and directed. |
| 28 | S&F 3mm thick Sheet glass ordinary quality & glazing with oil putty in square n-exc. 0.5 sqm in each pane complete all as specified & directed. |
| 29 | S&F 3mm thick figured glass pinheaded type and glazing with oil putty in squares not exceeding 0.5 Sqm in each pane complete all as specified and directed. |
| 30 | S&F Stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire taples complete all as specified and directed . |
| 31 | S&F in repair Stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire taples complete all as specified and directed . |
| 32 | M&L for Preparation of new wood surface of any description over 10 CM width or girth and applying two caots of synthetic enamel paint over a coat of pink primer complete all as specified. |
| 33 | M&L for Preparation of new steel surface of any description over 10 CM width or girth and applying two coats of synthetic enamel paint over a coat of Red Oxide Zinc Chrome primer complete all as specified. |
| 34 | M&L for rendering 5mm thick on fair faces of ceiling surfaces in cement mortar (1:3) including finishing the surface even and smooth (without using extra cement) by using scaffolding upto the 15m heightincluding taking down old plaster complete all as specified and directed. |
| 35 | M&L for rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces & finishing the surface even & smoothwithout using extra cement including taking down cement plaster of any description, thickness incl racking out joints hacking for key scrubbing down with water complete all as specified & directed. |
| 36 | M&L for rendering 15 mm thick on other than fair faces of brick work or concrete surfaces of wall in cement mortar (1:4) by using scaffolding upto the 15m height surface finished even and smooth without using extra cementincluding taking down cement plaster of any description, thickness incl racking out joints hacking for key scrubbing down with water complete all as specified and directed. (WPC shall be measured and paid separately) |
| 37 | Supply only water proofing compound (Dr. Fixit Pidiproof LW+) specially formulated integral liquid waterproofing compound composed of surface active plasticising agents, polymers & additives. |
| 38 | M&L applying two coats of oil bound distemper on new plastered surfaces on wall including necessary preparation of wall surfaces complete all as specified and directed. |
| 39 | M&L for preparation of new wall surfaces and applying two coats of cement base paint upto 15m height complete all as specified and directed. |
| 40 | M&L for preparation of new palstered surface of ceiling andapplying two coats ofwhitewashonceiling complete all as specified and directed . |
| 41 | S&F 25mm dia Stainless Steel Curtain Rod withdesigner SS knob fancy type with stainless steel brackets complete all as specified and directed. |
| 42 | M&L for pressed steel shutter 1mm thick including pressed steel frame of 1.25 mm thick sheet, 12 mm dia MS rod for locking, two Nos chromium plated handle and one Godrej pattern lock including two coat of spray painting over a shop coat of primer,. including fixing with 6 Nos 12 mm dia bolt 150 mm long grouted in brick wall/concrete including making good the disturbed surfaces as original including taking down existing seel shutter complete all as specified and as directed.Note :- The measurement shall be taken of front elevation and not girthwise.colour will be decide by GE. |
| 43 | M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including dismantling old existing tiles complete all as specified and directed. |
| 44 | M&L for Non - skid Ceramic colour tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including dismantling old existing tiles complete all as specified and directed. |
| 45 | M&L for Virified Ceramic tiles light shade 8 to 10mm thk (square/ rectangular) area of each tile exceeding 0.36 sqm or more size, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and incl 15 mm thick screed bed in CM 1:6 including dismantling old existing tiles complete all as specified and directed. |
| 46 | M&L for glazed ceramic colouredtiles 300x450x7mm thick set and jointed in neat cement slurry and pointed in white cement with pigment or coloured cement to match shade of tiles in vertical surface over and including 10mm thick rendering in CM 1:4 incl taking down old existing tiles complete all as specified. |
| 47 | S&F 50-100 mm wide (as required) rubber beading for door fixing with suitable nails complete all as specified and as directed. |
| 48 | M&L Machine cut Kota stone slab 18-20mm thick in one piece as in cupboard/ steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including dismantling (laid bedded and pointed in any mortar) of existing stone/slab complete all as specified & directed. |
| 49 | M&L for Providing cement concrete type B-1 (1:2:4) (20mm graded agg) in roof kerbs, bed block or Coping on compound wall, mud stops, gola, rounded, flat or chamfered on edges,complete all as specified and directed. |
| 50 | S&F in repairs 150 mm ,mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified & directed. |
| 51 | S&F in repair cupboard locks brass body (2 lever), Grade-I, size 50mm complete all as specified and directed. |
| 52 | S&F in repair ball catches with 8 mm dia steel ball, and brass body and striking plate for cup board shutters including letting in and fixed complete all as specified and directed. |
| 53 | S&F in repair cast iron Drawer pulls, 3 screw plate with fixed dished pull; 80 mm to 100mm long complete all as spd and direcyed.. |
| 54 | S&F in repair Mild steel mortice lock for Aluminium door vertical type 04 lever 100 mm size complete all as specified & directed. |
| 55 | S&F in repair Door closer hydraulically regulated, Aluminium (Die cast) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified & directed. |
| 56 | S&F in repair magic eye (door sight viewer)for doors complete all as specified and directed. |
| 57 | S&F in repair 50 mm size SS Butt hinges medium weight cold rolled complete all as specified & directed. |
| 58 | S&F in repair 100 mm size mild steel butt hinges medium weight cold rolled complete all as specified & directed. |
| 59 | Demolition of reinfocement cement concrete in any position i.e counter slab/ chajjas etc cut as required to facilitate and paving not exc.15 cm thickness (below or above ground level)complete all as specified & directed. |
| 60 | M&L for RCC type B-1 (1:2:4) (20mm graded srone agg) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like to match incl necessary form work complete all as specified and directed. |
| 61 | S&F mild10mm dia and over deformed TMT bars cut ot length bent to shape required including cranbing, bending spirrally, hooking ends and binding with and including mild steel wire annealed net less than 0.9 mm dia or securing with clips all as specified. |
| 62 | M&L for 16-18mm thick granite slab of any colour and shade (table rubbed and polished) including pointing in white cement (1:2) using marble dust, of superior quality set andjointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone over and including 15 mm thick screed bed in cement mortar 1:4, cutting the edges in bullnosed shaped and polishing complete incl dismantling old stone slab complete all as specified and directed. |
| 63 | Providing and applying plaster of paris putty of 1mm thk over plastered surface to prepare the surface even and smooth surface at any location incl filling the holes of nails and scratches preparation of surface complete all as specified and directed. |
| 64 | S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 65 | S&F anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m, including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 No.), 75mm long tower bolt (2 No.) suitable handle (1 No.) complete all as specified and directed. |
| 66 | Cuttings out old existings hinges any type from existings steel windows/ ventilators and providings new box type steel hinges to fix the old windows/ventilators and making good the complete all as specified and directed. |
| 67 | Welding / Cuttings out old existings hinges of any type from existings Steel Gate and providing of hinges to fix the old Steel Gateand making good complete all as specified and directed. |
| 68 | Demolition of reinfocement cement concrete cut as required to facilitate and paving not exc.15 cm thickness ( below or above ground level) for old RCC Tank Capacity N. exc 500 Ltr and finished the surface with PCC (1:2:4 ), type B-1 75mm thick in entire demolition area andrendering in CM 1:4 complete all as specified & directed. |
| 69 | M&L for Oil Putty work on old glass window shutter incl removing old/damaged putty from the same glass shutter complete all as specified & directed. |
| 70 | M&L for easing of door / window shutters of any size / any number of panels for easy closing / opening tightening of hinges or changing the position of hinges adjustments of tower bolts, sliding bolts etc complete all as specified and directed. |
| 71 | S&F in repair continuous (piano) hinges 30mm width of flaps (when open), mild steel, bright finish or electrogalvanised complete all as specified and directed. |
| 72 | S&F of 4mm thk ACP sheet incl necessary fittings as per reqmt of site complete all as specified and directed. Note:- Colour of ACP Sheet will be approved by GE (I) R&D. |
