Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete incl terrazo flooring (un-reinforced) in ground floor and paving not exceeding 15cm thick (below or above ground level) built in cement mortar removing from site complete all as specified and directed. |
| 2 | M&L for 75 mm thick cement concrete type D2 1:4:8 (using 40 mm graded stone agg) in sub base of flooring/ hard standing complete all as specified and directed. |
| 3 | M&L for 25mm thick PCC 1:2:4 type B1 (20mm graded stone aggregate) in flooring below tile stone work complete all as specified and directed. |
| 4 | M&L for 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone agg) as in plinth protection and path laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed.(Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.) |
| 5 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and removing the rubbish off the premises, complete all as specified and directed. |
| 6 | M&L for Non skid ceramic colored tiles , 7 to 8 mm thick (square / rectangular) area of each tile exc 0.06 sqm but n.exc 0.11 sqmas in flooring etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed/ bedding layer in CM (1:6) complete all as specified and as directed. |
| 7 | M&L for ceramic colour tiles in vertical surface of size 350 X 250 x 7/450x300x7 mm thick, jointless type, set and jointed in neat cement slurry and pointed in white or coloured cement to match tiles with and including 10 mm thick rendering in CM (1:4) for receiving the tiles, complete all as specified and as directed. |
| 8 | M&L joint free Non-Skid ceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bedin cement mortar 1:6 complete all as specified and directed. |
| 9 | All as per item here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering (backing coat) in CM 1:4,complete all as specified and as directed. |
| 10 | Dismantling stone slabs and tiles of any description or thickness laid , bedded and pointed in any mortaras in floors, aprons etc. complete all as specified and directed. |
| 11 | M&L for factory made machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment made of PVC moulded (or rubber mould) with vibrating system, with and including 50mm thick sand cushioning, including in CM (1:3) in edges of pavers, complete all as specified and directed.(Note : The cost of sand cushion and plastering to edges is included in quoted rate.) |
| 12 | M & L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over and including 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 13 | M & L for machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10 mm thick backing coatin CM 1:4 complete all as specified and directed.Note: Kota stone in Step will be placed in single piece with groove lines at edge. |
| 14 | M&L 20 mm thick granite slab of any type , tabled rubbed, machine cut, duly grinding, polishing, moulding etc of all outer edges / sharp corners, duly fixed in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4), incl pointing in grey cement (1:2) using marble dust with admixture of pigment to match with the shade of slab, complete all specified and directed. |
| 15 | Dismantling timber scantling 40.0 sqcm and over in section in any position as in framed / unframed works such as roof purlins, rafters, fillets, ridges etc as in roof/ ceiling, complete all as specified and directed. |
| 16 | M & L18/19 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws, including dismantling of old boarding, cupborad any description, fixed in any position including fittings, all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) |
| 17 | M & L25 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws,including dismantling of old boarding, cupborad any description, fixed in any position including fittings , all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) |
| 18 | Providing and fixing 2mm thick 18 to 25 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per directions of Engineer- in-charge. |
| 19 | S&F continuous (piano) hinges, mild steel bright finish in electro galvanized width of flat (when open) in 30mm, complete all as specified and directed |
| 20 | S & F drawer/shutter handles, projection drop (50mm to 65mm) on screwed platey complete all as specified and directed |
| 21 | S & F 100 mm aluminium anodise hasp and staple, safety type, aluminium anodisedwith hinge pin including bolt to hinge plate and fixed with screw complete all as specified and directed |
| 22 | Supply & Fixstainless steel magnetic catcher fancy type for kitchen cabinet / drawer complete all as specified and directed by Engineer-in-Charge. |
| 23 | S&F in repair Rubber bush (door seal) of 25mm wide fixedto door complete all as specified and directed |
| 24 | Demolition of brick work built in cement mortar or lime mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 25 | M&L for brick work with old size fly ash bricks, straight or curved on plan exc. 6 M mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 26 | M&L forBrickwork with subclass ‘B’ burnt bricks, straight or curved on plan exc 6m mean radius built in built in cement mortar 1:6 complete all as specified and directed. |
| 27 | M&L for half brick thick wall with old size fly ash bricks, straight or curved on plan to any radius built in cement mortar 1:4, complete all as specified and directed. |
| 28 | M&L for15 mm rendering thick in CM (1:6) on fair faces of brick work/concrete surfaces finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out old plaster joints hacking for key scrubbing down with water and removing rubbish from tile complete all as specified and directed. |
| 29 | M&L for rendering 15mm thick in two coats (1st coat 10 mm thick in CM 1:6 & 2nd coat 5 mm thick in CM 1:4 with WPC) on fair faces of brick work/concrete surfaces, finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed. Note: WPC in 5 mm thick 2nd layer plaster measured and paid separately. |
| 30 | M&L for5 mm rendering thick in CM (1:3) on fair faces of concrete surfaces in ceiling finished even & smooth (without using extra cement) including taking down cement plaster on brick or stone wall,dado and skirtingetc including racking out joints hacking for key scrubbing down with water etccomplete all as specified and directed. |
| 31 | M&L for preparation of new plastered of wall surface and applying two coats of oil bound distemper, over a coat of chalk whitening primerover and incl a layer 3mm thick of wall care putty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 32 | M&L for preparation of old wall surfaces and applying three coats of white wash on wall all as specified and directed. |
| 33 | M&L for preparation of newly plastered surfaces and applying two coats of white wash on ceiling all as specified and directed. |
| 34 | M&L for complete removal of existing treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with wateringand applying two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint (weather proof)of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old surfaces. complete all as specified and directed.Note : The contractor shall produce batch certificate & delivery challans directly from paint manufacturer to establish the authenticity of the material. The batch testing certificate shall be brought at the site along with paint manufacturer\"s drums with seal intact. |
| 35 | M&L for complete removal ofexisting treatment and preparation of surfaces of walls by scrapping/sand paper rubbing and finally washing with watering preparation of newly plastered surfaces and applying three coats of white wash on ceiling all as specified and directed. |
| 36 | M&L for complete removal of existing treatment by brushing, washing, rubbing down, scraping from old treated surfaces of wall and applying two coat of oil bound distemper over a coat of chalk whitening primer, over a layer of (JK/Birla) 3.0 mm thick wall care putty to get smooth and level finish, complete all as specified and directed. |
| 37 | M&L for preparation of old steel or iron surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed |
| 38 | M&L for preparation of old paintedsurfaces of wood of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed |
| 39 | Taking down chowkhats with shutters (without taking off shutters from the frame) area exc 1.5 sqm but not exceeding 4 sqm each including cutting holes in brick/ stone wall built in cement / lime mortar, embedded portion exc half brick but n.exc one brick for inserting new hold fast and making good the disturbed portion/surfaces, in CM 1:3 complete all as directed. |
| 40 | All as per item here-in-above but not exc 1.5 sqm each |
| 41 | Taking down shutters of any description not exc 01 Sqm each, complete all as specified and directed. |
| 42 | S&F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/Chowkhat of size 45 x 70 mm (± 5 mm tolerence in dimension) comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fastenersincl in this item of required dia and length complete as per direction of Engineer-in-Charge. |
| 43 | S & F for Factory made double extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/Chowkhat of size 65x125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof,water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). ® Note: For WPC solid door/window frames,minus 5mm tolerance in dimension i.e.depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made complete all as specified & directed. |
| 44 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick prelaminatedcolour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 45 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 46 | S&F Factory made single 35 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 47 | M&L 30mm thick factory made solid WPC (Wood plastic composit) moulded gauged door shutter with wire mesh in any number of division with brown wood grain texture, including stainless steel wire shall mesh be fixed with 15x15 Square tube in side rails with screwing 8x28 heat metal zink coated screws can be remove or fie again of the shall be as per manufacture instruction complete all as specified and complete all as specified and complete all as specified and directed. |
| 48 | S &F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm prelaminatedcolour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 49 | M&L for box type steel window with 80x40x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing barsdoweled and welded complete all as specified as directed. Note:-(a)The 4.0 mm thick plain glass andwiremesh of 0.56 mm in nominal dia of wire andaverage width of aperture 1.18 mm are included in quoted rates. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3 mm thick. |
| 50 | M&L for box type steel Ventilator with 80x40x1.25 mm MS tubular frame with side hung shutters ( double shutter for glass and gauze) without sash bars jointed together with and incl grill using12 mm square bar @ 10 cm C/C incl box type hinges with steel handle and steel pag stay complete glazing barsdoweled and welded complete all as specified as directed. Note:-(a)The 4.0 mm thick plain glass andwiremesh of 0.56 mm in nominal dia of wire andaverage width of aperture 1.18 mm are included in quoted rates. (b) Side hung Z-Section shutter shall be of size 20mm x 20mm x 25mm and 3 mm thick. |
| 51 | S&F of aluminium alloy anodized sliding door bolt 300mm (aldrop bolt) length with hasp staple and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixedcomplete all specified and directed |
| 52 | S&F of 100 mm size butt hinges, extruded aluminum alloy with galvanized mild steel pin type B-21anodized complete all specified and directed |
| 53 | S&F of 150mm long barrel tower bolt aluminum anodized extruded section fixed with cadmium plated screws complete all as specified and directed. |
| 54 | S&F of 150mm aluminum handle cast type anodized complete all specified and directed. |
| 55 | S&F of mild steel ordinary rat tail rod pattern springs of size 300mm including roller and roller plate complete all as specified and directed |
| 56 | S&F of 140 mm door stopper of aluminium body and tongue anodized with hard drawn steel spring fixed in floor complete all as specified and directed. |
| 57 | S & F in repair stainless steel curtain rod 25mm dia steel pipe cutting into length as required at site with and incl SS end caps/lobs and SS wall mounting brackets, complete all as specified and directed. |
| 58 | S & F in repair stainless steel rod 15mm dia steel pipe cutting into length as required at site with and incl SS end brackets, fixed in cupboard and similar works, complete all as specified and directed. |
| 59 | S&F of ringfit PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 60 | S&F of PVC (SWR) pipe of 110 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors,including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 61 | S&F of Ringfit PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end as self socketed with an integral groove to hold the rubber gasket, with and incl rubber tighten gaskets, ringfit sockets etc, complete pipe duly fixed to wall, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and patterncomplete all as specified and directed. |
| 62 | S&F of PVC (SWR) pipe of 75 mm nominal dia size, wall thickness of 3.5 mm, Type A, in any length, single socketed type as per IS : 13592-1992 with latest amendment, having one end of the pipe as plain and other end socketed, duly fixed with cement solvent etc, complete pipe duly laid in trenches or in floors, including taking down of eaves gutter and rain / waste water pipes including all fittings any size and pattern complete all as specified and directed. |
| 63 | S&F 110 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 64 | S&F 75 mm bore PVC (SWR) bends of any radius, complete all as specified and directed. |
| 65 | S&F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal, complete all as specified and directed. |
| 66 | S&F 75 mm bore PVC (SWR) junction single (Single `T\") equal or unequal, complete all as specified and directed. |
| 67 | S&F PVC (SWR) vent cowl 75mm bore, jointing to waste pipe, complete all as specified and directed. |
| 68 | S&F PVC(SWR) vent cowl 110mm bore, jointing to waste pipe, complete all as specified and directed. |
| 69 | S&F PVC floor trap of 75 mm outlet, jointing to waste pipe, complete all as specified and directed. |
| 70 | M & L for PVC (SWR) gully trap 110 mm, setting and jointing with solvent cement complete all as specified and directed. |
| 71 | S & F 15 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors, concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 72 | S & F 20 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors,concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 73 | S & F 25 mm bore Galvanized Steel tubes, medium gradefixed to walls and ceilings or laid in floors,concealed or open incl cutting of grooves including taking up or down with connections and fittings all as specified and directed |
| 74 | M&L for cutting chases, pinning in for concealed water tubing, not exc 10 cm girth and making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc complete all as specified and directed. |
| 75 | S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered white colour 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, with and incl disconnecting and dismantling the existing un-serviceable PVC/RCC water tank on top of roof/slab of bldgs, complete all as specified and directed. |
| 76 | S&F of 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 77 | S&F of 25 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed, complete all as specified and directed. |
| 78 | S&F of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. |
| 79 | S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm |
| 80 | S&F in replacement of stainless steel kitchen plate rack made out of 1 mm thick sheet of size 765x920mm and 220mm deep, weight not less than 7 Kg, complete all as specified and as directed. |
| 81 | S&F in repair 600x450mm size and 4mm thick beveled edge looking mirror of selected quality glass, having PVC moulding/beading all around, mounted on 4mm thick PVC board, with and incl fixing accessories, complete all as specified and directed. |
| 82 | S&F in replacement of pillar taps, 15 mm dia, cast copper alloy, with capstan heads, chromium plated, fancy type, screwed down high pressure,with long screwed shanks and fly-nuts, complete all specified and directed. |
| 83 | S&F in replacement of stop cock with long shank and cup (concealed type), 15mm dia with wall flange, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe / unions, complete all as specified and directed. |
| 84 | S&F in replacement of overhead shower of dia 125 mm round shape single flow, ABS body chrome plated fancy type, with and incl swivel type shower arm of 20mm dia with wall flange made of cast copper alloy, chromium plated fancy type,complete all specified and directed. |
| 85 | S&F in replacement of long body bib cock, 15 mm dia with wall flange made of cast copper alloy, chromium plated,complete all specified and directed. |
| 86 | S&F in replacement of angular stop cock 15 mm dia with wall flange made of cast copper alloy, chromium plated type, complete all specified and directed. |
| 87 | S&F in repair SS grating of squre/round shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and incl fixing with CM to floor/nahani traps etc, complete all specified and directed. |
| 88 | S&F in replacement of towel rail 600 mm long D type between flange and wall bracket made of cast copper alloy, chromium plated, complete all specified and directed. |
| 89 | S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long, complete all as directed. |
| 90 | S&F in replacement ofPVC multipurpose cabinet mirror with front openable door of overall size 350 x 450 mm, complete all as specified and directed. |
| 91 | S&F in replacement of Brass CP connection 15mm dia and 45cm long with 2 Nos brass check nuts with washers for geyser, complete all as directed. |
| 92 | S&F in replacement of PVC waste pipe 32 mm dia 750 mm long with for wash hand basin or for kitchen sink, complete all as specified and directed. |
| 93 | S&F in replacement of PVC connection 600 x 15mm dia PTMT (PVC), complete all as directed. |
| 94 | S&F in replacement of 10 ltr capacity PVC valve less symphonic action type flushing cistern, white, with inlet ball valve, float and handle with and including wall bracket, 32 mm dia PVC flush pipe and connected to squat pattern / pedestal pattern water closet, including all joints and making good to the wall & floor,complete all specified and directed. |
| 95 | S&F in replacement of 1st quality vitreous china squatting pan Orissa pattern of size 580x440 mm, white colour with integral foot rests water closet including flush pipe, P Trap and connecting conebut exluding flushing cistern, duly fixed in lime concrete bedding and making good of floor surface, complete all as directed. |
| 96 | S&F in replacement of 1st quality vitreous china wash hand basin, white flat/angle back, size 550x400mm, complete including necessary cutting for and pinning in ends of brackets) with and including wall brackets, PVC waste pipe of 750mm long, CP waste coupling of 32mm dia size,complete all as specified and directed. |
| 97 | S&F in repair corner sheet glass shelf assembly consisting ofsize (300mm x 300mm) x 5.5 mm thick sheetwith chromium plated bracket guard complete all as specified and directed. |
| 98 | Demolition of RCC Not exc 15cm thickness Roofs, floors (other than ground floors), beams staircases, landing, chajjas, Cover slab and similar suspended work and removing from tile. |
| 99 | M&L for RCC1:1/2:3 (Nominal Mix) (20 mm stone agg) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as spd |
| 100 | M&L for mild steel deformed TMT bars 8 mm to 10mm dia (as in reinforcement) cut to length, bent to shape require including cranking, bending spirally for hooking for column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia complete all as spd and directed by engr in charge |
| 101 | M & L for rough finishformwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and directed. |
| 102 | Removing existing water proofing treatment by brushing with wire brush, cleaning of terracing by taking down cement concrete, existing plaster lime cova 80 to 100mm thick mud phuska/cement concrete/lime coba /brick layer etc, cleaning of all foreign material such as fungus mass dust etc, roughing surface of corner to roof by wire brush and removing rubbish from tile complete all as specified and directed. |
| 103 | M&L of water proofing treatment to non-accessibleroof slabwith APP based modified polymeric membrane centre core 100mm micron HMHDPE outer film 20 micron each having thickness 3mm weight not less than 3kg/Sqm as per manufacturer’s instructions laidwith torch application complete all as specified and directed by Engineer-in-Charge with following course of description below:-(a) 10 mm thick plaster in CM 1:4 with WPC (liquid water proofing compound @ 0.20 Ltr/bags(50 Kg Bag))will be applied over the roof slab (subjected to condition as mentioned in notes) . After the plaster is cured the roof will be tested for water tightness by ponding with water for seven days for any seepage is observed the rectification will be carried out by pressure grouting under the pressure of 5kg/sqcm using cement based grout. After the surface is repaired the slab will be tested for water tightness again before proceeding with further treatment. (b) the surface of roof, parapet and gutters, drain mouths, etc. over which waterproofing treatment is to be applied shall be cleaned of all foreign matter such as, fungus, moss, dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut around to tuck in the treatment. Concrete angle-fillets shall be provided at junctions between roofs and vertical faces of walls (parapet and other walls) around obstacles such as pipes, chimney stacks, etc. and other similar situation to ease up about corners.(c) Bitumious based primer confiorming to IS: 3384 @ 0.3 kg/Sqm to be applied on prepared surface, till the surface is propely impregnated. (d) After the application of approved bituminous primer the water proofing membrane shall be laid on the primed surface by torch application method as per manufacturer\"s instruction. The overlap while toching shall be 100mm in longitudinal direction and 100 mm in transverse direction. All overlap joints shall be sealed thoroughly by thermo fusing both the membrane layer and seling it with the help of hot trowel. The overlap joints shall be made as a monolithic layer. (e) All joints and changes in direction should be curved with cement mortar 1:3 mixed with SBR latex @ 200ml per bag of cement and cured well before laying the membrane. (f) after apllication of APP membrane one coat of aluminium paint @ 0.20 Kg/Sqm over APP membrance will be appliedNote :The cost of all items i.e. from Sr No. (a) to Sr No.(f) are included in quoted rate and no separate payment will be done for the above except liquid WPC. |
| 104 | M&L for Cement concrete tiles 25cm x 25cm x 20mm thick, machine pressed; set jointed and pointed in neat cement slurry with gray cement and no pigment in floors, roofs; cut and polished, over and including a layer of 15 mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 105 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in padding levelling etc and roof kerbs,tank staging etc complete all as specified and directed. |
| 106 | Demolition of cement concrete of any description and in any position of WC’s/Bathroom etc in sunken portion area above ground floor, removing demolished material completely and old waste pipe from sunken portion and cleaning the side/bottom surface of sunken floor with wire brush, removing rubbish from tile complete all as specified and directed. |
| 107 | M&LPCC 1:5:10 Type E2 using 40mm graded stone aggregate as in mass filling in two layer in sunken portion complete all as spd and directed |
| 108 | M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5 mm graded stone aggregate as in padding levelling etc and roof kerbs with liquid water proofing solution finished even and fair with proper slope as prepatory works to water proofing treatment complete all as spd and directed by EIC.Note:-liquid water proofing solutionshall be provided in 150ml in 50 Kg of Cement by weight and cost of liquid water proofing solutionmeasured andpaid seperate itemcomplete all as directed. |
| 109 | M&L for 15mm thick plastering in CM 1:3 along the wall of toilet and bath mixed with 3 % WPC and finished even and smooth without using extra cement complete all as specified and directed. |
| 110 | M&L forbitumen blown 80/100 grade applied hot, two coats to plasteredsurfaces of any description at the rate of 1.5 kg per sqm per coat complete all as specified and directed. |
| 111 | M&L for Polythene film black 50 micron laid in floor complete all as specified and directed. |
| 112 | M&Lfor 50mm dia G.Ipipe as in spoutto drain out ifany leakage occures in the sunken portion complete all as spd |
| 113 | Supply only integral liquid water proofing compound LW++, mixed in CM as per manufacturer instruction,complete all as specified and directed. |
| 114 | Excavation in trenches n.exc 1.5m wide and n.exc 1.5 m depth, for foundation etc or for shafts, wells, cesspits, manholes, pier holes, etc n.exc 10 sqm on plan and n.exc 1.5 m in dedpth and getting out hard/dense soil complete all as specified and directed |
| 115 | M&L for Returning, filling in including spreading, levelling, watering and well ramming in layersnot exc 25 cm and getting in hard/densesoil all as specified as directed. |
| 116 | M&L of removing excavated material nexc.50 m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as well as specified |
| 117 | M & L Reinforcement Cement concrete type B1 (1:2:4) using 20mm grades stone aggregate as in cover slab for draine & manholes etc. as directed incl use and waste of necessary form work complete all as spd. |
| 118 | M&L for cement concrete 1:2:4 type B1 (20mm graded aggregate) in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, copings, bond stones, bed plates for hold fast and the like including weathering, slightly rounded or chamfered angles and throating, , complete all as specified and directed. |
| 119 | S & F rolled mild steel in Fe 410-W (Gde-E- 250) quality-A as in framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete |
| 120 | M&L DWCPE(SN8) 200 (OD)/175(ID)mm diameter Pipes laid on 150 mm thick bed with excavation in any type of soil, including manholes/drop manhole of standard size made of Brick masonry/ RCC/Precast RCC with SFRC ventilating cover and frame. Includes all items and activities to execute and make sewer line functional for depth of manhole 0.70m to 1.65m depth |
| 121 | M&L for plain cement concrete (1:4:8) Type D-2using 40 mm graded aggregate in foundations, filling and mass concrete below wall complete all as specified and directed. |
| 122 | M & L PCC 1:3:6 type C2 using 20mm graded aggregate in surface channels and drain, complete all as specified and as directed. |
| 123 | M&L for two coat of cement base paint on new decorated surfaces of walls including preperation of surfaces |
| 124 | Dismantling of cast iron or reinforced concrete drain pipes ,jointed in cement mortar and taking out of trenches if requried . |
| 125 | M&L reinforced concrete pipes, 600mm bore, class NP-3 laid and jointed complete with collars all as specified and directed |
| 126 | Rolling and consolidation of formation surfaces in cutting of roads, consolidation to required level, radiant and camber, filling in hollo and depression withexc 8 to n.exc 12 tonne power roller. complete all as specified and directed. |
| 127 | M&L for 200mm thick(spread thickness) soling (or sub base)with broken boulder quarried stone interstices filled, surface formed and rolled and consolidated to required gradient and camber with exc 8 to n.exc 12 tonne power roller. complete all as specified and directed. |
| 128 | M&L for plain Cement concrete, 100 mm thick, type D-2, 1:4:8 (40mm graded aggregates) as in sub base of hard standing /PCC road , complete all as specified. |
| 129 | M&L 200 mm thick PCC ( 1:2:4) Type B1 (using 20mm graded stone aggregates) as in floors, hardstanding, concrete roads including brooming , complete all as specified and as directed by the Engineer-in-Charge. |
| 130 | M&L Forming Construction joint 30mm deep x 10mm wide filled with sealing compound, Grade `B\", complete all as specified and as directed by Engr-in-Charge. |
| 131 | M&L Forming 20mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `B\", as in 250 mm thick slab, complete all as specified and as directed by Engr-in-Charge. |
| 132 | M&L for 100mm thick (spread thickness) moorum/red bajri brought from out side MD land, filling in layers not exceeding 10cm thick, spread watered , rolled and consolidated with 8 to 12 tonne power roller to required camber and gradient, complete all as specified and directed. |
| 133 | M&L Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/rolling and finishing to required size, shape, etc., n exc. 1.5m high from base, complete all as sfd. |
| 134 | M&L for 75mm thick (compacted thickness) water bound macadam laid in one layer,with coarseaggregateof grading 3 (50 to 20 mm size) using lime stone, sand stone, flint or quartzite and surfaces oflayer will be blinded with screening and moorum, spread ,watered,rolled and consolidated to required gradient and camber using8 to 12tonne power roller complete all as specified and directed. |
| 135 | M&L Boulder pitching, net in CM 1:,6hand packed tightly ,complete all as specified and as directed by the Engineer-in-Charge. |
| 136 | Dismantling Asbestos Cement (Corrugated or Semicorrugate) sheet in Roof covering complete all as specified and directed. |
| 137 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 138 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 139 | M&L for preparation of new plastered surfaces of wall and applying two coat of weather proof exterior grade emulsion paint over and including a coat of cement based primer |
| 140 | Preparation of new or previously untreated steel surface of any description not otherwise described over 10 cm width or grith and applying two coats of syntheticenamel paint (Ordinary tint) over a coat ot red oxide complete |
| 141 | Surface excavation n.exc (not exceeding ) 30 cm deep andaveraging15 cm deep and getting out in any type of soil . |
| 142 | S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5 mm dia GI wire from roof/Slab/truss including wall/perimeter runner/channel of 15 mm size with and including 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm duly fixed in ceiling frame work including taking down old ceiling any type complete all as specified and directed. |
| 143 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone, concrete or brick surrounds, glazed with putty or fixed with beads, complete all as directed. |
| 144 | S&F in repair of 3 mm thick sheet glass ordinary quality and glazing type, not exc 0.50 sqm in each pane, duly fixed with oil putty or wooden bidding as required, complete all as directed. |
| 145 | M&L for preparation of new plastered surfaceof wall and applying two coats of interior acrylic emulsion, over chalk whiting primer and including a layer of 1.5mm thick wallputty to get even and smooth level finish on new plastered surface of internal wall, complete all as specified and as directed. |
| 146 | M&L for preparation of old plastered surfaces of wall sand applying one coat of interior acrylic emulsion, white or tintedon walls using mechanical means complete all as specified and directed. |
| 147 | M&L for joint free, Vitrified Ceramic tiles of light shed8-10 mm thick (square/rectangular) polished , area of each tile exc 0.42 but n.exc 1.00 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM (1:6) complete all as specified and as directed. |
| 148 | All as per item here-in-above but on vertical surfaces such as skirting/dado over and including 10mm thick CM rendering in CM 1:4,complete all as specified and as directed. |
| 149 | Supply and fixing factory made UPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.00 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension,including 6 mm thick full length fancy type toughned glass,EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 150 | Supply and fixing factory made uPVC white colour fixed glazed ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, including 6 mm thick full length toughned glass, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall becceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 151 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. including 6 mm toughned full length fancy type glass andwiremesh of 0.56 mm in nominal dia of wire average width of aperture 1.18 mm,Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. |
| 152 | M & L25 mm thick factory made single extruded WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations, kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws,including designer edge binding tape of required width, including dismantling of old cupboard boarding of any description all as per direction of Engineer-In- Charge. (Note: stainless steel piano hinges/soft close clip on concealed hinges shall be paid separately) |
| 153 | M&L for preparation of new plastered of ceiling surface and applying two coats of oil bound distemper, over a coat of chalk whitening primerover and incl a layer 3mm thick of wall care putty on ceiling to get even and smooth level finish on new plastered surface of ceiling surface, complete all as specified and as directed. |
| 154 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed. |
| 155 | S & F framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and as directed. |
| 156 | S&F of exposed frame false ceiling system with GI powder coated grid consisting of interlocking arrangement of main T runner of 15mm size, suspended at 1200mm C/C and cross T runner of 15mm size suspended at 600mm C/C supported by 1.5 mm dia GI wire from roof/Slab/truss including wall/perimeter runner/channel of 15 mm size with and including 4mm thick pre-painted non asbestos fiber reinforced cement board (E-board), designer type of size 595x595mm duly fixed in ceiling frame work complete all as specified and directed. |
| 157 | Providing and fixing 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with Intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of oil bound distemper over a coat of primer suitable for board, all as per manufacturer\"s pecification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge |
| 158 | Removing excavated material exc. 50m upto 100 mand depositing where directed at a level n exc. 1.5 m above the starting point. |
| 159 | M&L for cement concrete 1:2:4 type B-2 (using 40 mm graded stone aggregate) as in surface channels and drains complete all as specified and directed. |
| 160 | M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred/ stopped ends etc complete all as specified and directed. |
| 161 | M&L 15mm thick Rendering on fair faces of brick work or concrete surfaces in CM 1:4 finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 162 | M&L for providing precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in cover slabs set in cement mortar 1:6 complete all as specified and directed . |
| 163 | M&L 150mm reinforced concrete pipes, class NP2, laid and jointed with skeins of spun soaked in neat cement wash shall be inserted in the grooves at the ends of the pipes, the two adjoining pipes put against each other the collar is slipped over the joint covering equally both the pipes, more skiens of spun yarn soaked in cement wash shall be passed round the pipes and inserted in the joints by means of caulking tools after that cement mortar 1:2 slightly moistened shall be inserted in the joints finished in 45 degree slope complete Note:- After curing 7 days to the joints the sewage pipeshall be tested as per procedure laid down for water test. |
| 164 | M&L concrete bed to drain pipe for 150 mm dia pipes in PCC (1:4:8) type D2 using 40 mm graded stone aggregate incl packing under and haunching against the sides of pipes after they are laid and tested. |
| 165 | M&L for conventional LLDPE septic tank conventional designed to carry sewage and sullage water including excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete for 30 Users. |
| 166 | Soakage wells excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 3.0 M dia X 4.5 M effective depth |
| 167 | M&L for Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and directed. |
| 168 | M&L for rendering10mm thick onfair faces of brick work or concrete surfacesin CM 1:4 for receiving wall tiles. |
| 169 | Providing and fixing Table Topwhite Vitreous China wash basinof specified size and model,32mm CP brass waste coupling,C.P brass pillar cock 15mm sizehaving long neck and Aerator, C.Pbrass bottle trap 32 mm size,extension pipes, wall flanges andconcealed G.I clamps completeincluding making necessary holes and other cutting in the countertop and fixing the wash basin,pillar cock rigidily including makinggood the walls wherever requiredall complete as per the architectural drawings and as directed by Engineer-in-Charge. |
| 170 | S&F in replacement oftowel ring round shape of suitable size made of cast copper alloy, chromium plated, complete all as specified and directed. |
| 171 | S&F in repair of toilet paper holder of stainless steel fixed to walls with chromium plated brass screws |
| 172 | S&F in repairs ceramic One Piece Water Closet with inbuilt cistern including slow falling seat cover and all necessary fittings of suitable size complete all as specified and directed. Make- Cera |
| 173 | S&F in repair CP brass hot & cold mixer cast copper alloy with centre hole for WHB and long shank fancy type 15m borecomplete all asdirected by Engineer-in-charge. |
| 174 | S&F in repairCP brass hot & cold 15mm dia 3 in 1 type wall mixture for mixing hot & cold waterwith provision for shower with connecting legs & flangescomplete all as specified and directed. |
| 175 | S&F in repairs CP two way angular stop cock, chromium plated long shank 15 mm dia with wall flange, ISI Marked, complete all as specified and directed. |
| 176 | S&F in repairs hand shower (health faucet), superior quality, round shape, single flow, brass chromium plated, with 1m long chrome finish flexible pipe with wall hook bracket etc. and all fittings for connection to EWC complete all as specified and directed. |
| 177 | S&F in repair 1000 Litres capacity rotational moulded polyethylene water storage tanks, three layered, ISI Marked (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-2009 including 20mm dia GI light grade washout pipe 50mm long with plug and 20mm dia GI light grade over flow pipe 600mm long with fitting including dismantling of existing unserviceable tank and removing from site complete all as specified and directed |
| 178 | S&F 12 mm thick toughened glasspartion of approved brand andmanufacture, including providing and fixing top & bottom pivotfixing arrangementand making necessary holes etc.for fixing requiredfittings, allcomplete as per direction ofEngineer-in-charge (Door handle,lock and stopper etc.to be paidseparately). |
| 179 | M&L for heavy duty, coloured exterior heavy duty tiles 400mm x 400mm x 8 to 10 mm thick, for path over & including 20 mm thick screed bed in CM (1:4), as per sample kept in GE office, complete all as specified and directed. |
| 180 | M&L for factory made rubber mould, chequered cement concrete tiles in floor of any colour 30 cm x 30cm x 20 to 22 mm thick, set & jointed and pointed in neat cement slurry mixed with grey cement and pigments, laid over and including 15mm thick screed bed or bedding layer in CM 1:6, complete all as specified and as directed. |
| 181 | Taking down shutter of any description exc 1 sqm and not exc 2 sqm each complete all as specified and directed |
| 182 | Taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. but excluding Fan & Geysers and removing materials to storefor taking credit and making good disturbed surfaces of walls, floors, etc.complete all as specified and directed. |
| 183 | M&L for point wiring for modular fittings complete with 1.5 Sqmm FRLS insulated, unsheathed, multistranded, 1100 Volts grade copper conductor cable single core conforming to IS:694 along with one run of 1.5 Sqmm FRLS insulated copper conductor cable green in colour for continuous earthing drawn through and including medium grade rigid PVC conduit conforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm(OD), concealed in wall/ floor etc including provision of modular cover plates with frames and 1.50 sq mm PVC insulated unsheathed stranded copper conductor (FRLS) cable for common earth and connecting to earth dolly all as specified and directed by Enrg-in-charge. (Note- rates of chasing/cutting & making goods shall be included in the unit rate) :- |
| 184 | One light point/ceiling fan/exhaust fan controlled by one switch |
| 185 | One Bell point controlled by one switch |
| 186 | One 6A socket point controlled by one switch on independent board |
| 187 | One 6A socket point controlled by one switch on same board |
| 188 | One light point controlled by two 2-way switches, with cables 1.5 sq. mm size |
| 189 | All as per srl item No. 201 here-in-before but with 2.5 sq mmFRLSH copper wire with 2.5 Sqmm FRLS copper earth wire for one 16 Amp socketpoint controlled by one 16 Amp switchon independent board. |
| 190 | Taking down submain wiring of any size any type and in any position metallic and non metallic PVC conduit of wooden batten complete all as specified and directed. |
| 191 | M&L for submain wiring alongwith earth wire 2 runs x 6 sqmm + 1 run x 6 sqmm with FRLS insulated copper conductor, single core cable drawn through and including medium grade rigid PVC conduit ISI Markedconforming to IS:9537 (Pt-III) and its all accessories/junction boxes/ inspection covers etc of suitable size but not less than 20mm concealed in wall/ floor etc and directed by Engineer-in-Charge.Note: Three runs of copper cable and one run of PVC conduit shall be measured as one unit length |
| 192 | S&F of Modularswitch1way6A,1 module 240V, 50Hz complete all as specified and directed. |
| 193 | S&F Fan step regulator, 120W - 2 module, 240V, 50Hz ISI marked with valid CML complete all as specified and directed. |
| 194 | S&F of Modular Socket,6A - 2/3 pin combined 2 module 240V, 50Hz complete all as specified and directed. |
| 195 | S&F of Modularswitch1way16A,1 module 240V, 50Hz complete all as specified and directed. |
| 196 | S&F OF Modular switch 2 way 6A,1 module 240 V, 50 Hz complete all as specified and directed. |
| 197 | S&Fangle holder, metal cased, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 198 | S&FCeiling rose, three terminals, bakelite body, 240 volts, ISI marked with valid CML complete all as specified and directed. |
| 199 | S&FBell Push , flush type, 5 Amp, marked with valid CML complete all as specified and directed |
| 200 | S&F electric bell of DINGDONG type,240 volts, ISI marked with valid CML single pole and making all necessary connections, complete all as specified and directed. |
| 201 | Supply and fixVentilataing fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50HZ, RPM 1200, Copper winding of sweep 250 mm including connection with 1.5 sqmm, three core copper wire from ceiling rose to exhaust fan upto 1 mtr length including fixing on ventilator complete all as specified and directed by Engr-In-Charge. |
| 202 | Taking down light fitting of any capacity and any sizeand in any position complete all as specified and directed. |
| 203 | S&F LED Tube light fitting batten type 20W, 230W, efficiency 120 Lumens per watt, colour temperature6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) and integrated Electronic driver complete with al accessories internally Pre-wired and including connecting with 3 Core twisted flexible copper conductor cable of suitable size from celling rose all as specified and directed.Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 204 | S&F LED Tube light fitting batten type 10W, 230W, efficiency 120 Lumens per watt, colour temperature6500k (Cool White), Power factor grater than 0.9, Polycarbonate body, CRI 80, IP Rating, IP 20, THDv with in 5 % and THDi (8-10%) complete with all accessories internally Pre-wired and including connecting Up with 3 Core twisted flexible copper conductor cable of suitable size from celling rose all as specified and directed.Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 205 | Supply and fixLED bulkhead luminaire 10W in die-cast aluminium alloy/ PVC body heat resistant prismatic glass cover, with specially designed gasket for minimum IP 55 degree of protection complete all as specified and directed by Engineer-in-Charge. |
| 206 | Supply and fixLED building security light fitting 35 watts, Luman efficacy of LED 140 lm/W, PF>0.95 THD<10%, colour temperature 6500K CRI > 7, system luman not less then 2600 lm, made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens with toughed glass having bottom separate driver compartment with IP 65 protection and impact resistant of IK 07 etc and all accessories previewed complete including mounting bracket of GI Pipe 40mm inner dia light grade of reqd length and shape including bending, forging or welding etc and suitable bolts and nuts with washers, including connecting with PVC insulated multistandered cooper flexible cable of size 0.5sqmm 3 core form celling rose to fitting all as specified and directed. Notes:- (i) The rate of three core twisted flexible copper conductor cable of suitable size for connection is included in this item and noting shall be paid extra on this account.(ii) Warranty for replacement of each LED lite fitting shall not be less than 2 years from the date of purchase.(iii) Date of purchase shall be marked on each fixture with permanent marker for redeeming warranty benefits. |
| 207 | Supply and fixElectric Water Heater storage type, vertical, 25 Ltrs capacity, 5 Star rated, with heating element, PUF insulation, multifunction safety valve, adjustable knob for temperature setting and mild steel inner tank and outer body suitable for operating on 230V, 50 Hz, single phase AC supply including hot & cold water PVC connections and mounting on wall with suitable size & No. of anchor bolts complete all as specified and directed. Note: Old & New Geyser to be taken on ledger charge before payment. |
| 208 | Supply and fix modular MCB protected plug and socket board in sheet steel enclosure with 20A rated mini MCB and 20A rated 3 pin plug, 240 V, 50 Hz complete including cutting the wall surfaces for flush mounting of socket board and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge. |
| 209 | S&F of ceiling fans complete with blades, down rods, (with remote) and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM, Five star rated with brushless direct current motor (BLDC)including connection with 1.5 sqmm, three core copper wire from ceiling rose complete all as specified and directed by Engineer-in-Charge. Note: Old and New Fan to be taken on fan ledger charge before payment. |
| 210 | Supply and fix of exhaust fan with steel body 300mm sweep with blade , with louvers shutter, voltage 230V, 50HZ, RPM 1200, Copper winding including connection with 1.5 sqmm, three core copper wire from ceiling rose to exhaust fan upto 1 mtr length including fixing on ventilator complete all as specified and directed by Engr-In-Charge.Note: Old and New Exhaust fan to be taken on ledger before payment. |
| 211 | Taking down unserviceable VTPN/TPN DB with MCB\"s of any make /capacity complete all as specified and directed by Engr-incharge. |
| 212 | S&F of MCCB / MCB distribution board, Vertical TPN, 4 way, 415 V, 3 phase, AC with MCCB as incomer and MCBs as outgoing in sheet steel powder painted enclosure double door type with minimum IP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surfacecomplete all as specified and directed.Note: MCCB / MCBs shall be measured and paid separately. |
| 213 | Taking down unserviceable Sheet metal box & MCB DB SPN with MCB\"s of any make/capacity complete all as specified and directed by Engr-in-charge. |
| 214 | Supply and fix MCB distribution board, SPN, 8way 230 Volt in sheet steel powder painted enclosure double door type withIP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.Note:MCBs shall be measured and paid separately. |
| 215 | Supply and fix MCB distribution board, SPN, 4way 230 Volt, 1 phase, AC, in sheet steel powder painted enclosure double door type withIP 43 degree of protection with built in copper bus bar, neutral link and earth link complete including cutting the wall surfaces for flush mounting of DB and making good with cement plaster, putty and paint to match with the existing surface all as specified and directed by Engineer-in-Charge.Note:MCBs shall be measured and paid separately. |
| 216 | S&F MCB SPN 40-63 Amp, 240 V with breaking capacity 10 KA,\"C\" series complete all as specified and directed. |
| 217 | S&F MCB SP 6-32 Amp, 240 V with breaking capacity 10 KA, \"C\" series complete all as specified and directed. |
| 218 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with XLPE insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanised steel wire or strip and overall PVC sheathed, 35 sq mm 4 core ISI Marked as per IS 7098(Part 1) including connecting on LT panel based with suitable lugs, glands etc including taking out of cable any type complete all as specified and directed. |
| 219 | Material and labour for Double wall corrugated HDPE pipe, ISI marked of outer dia 50mm, inner dia 38mm with smooth internal and profiled external surface, non-pressure type, laid in trenches/floors/duct or fixed on walls /pole including all connections, accessories like socket, couplers, bends, etcfor protection of LT cable XLPE grade 1100 volts complete all as specified and directed by Engineer-in-Charge. |
| 220 | Taking down old U/S earthing and M&L for Earthing complete with galvanised iron earth plate electrode 600mm x 600mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to GI wire 4 dia mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth wire protected by 15mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electircal plate No. 3 of SSR Part-I(2009) and testing on completion complete all as specified and directed. Note :- The unit rate quoted shall also include for excavation, earth work in any type of soil, plain cement concrete 1:3:6 mix, Type C1 pit, 40mm thick RCC 1:2:4 mix type B1 cover reinforced with 8mm dia TMT bras @ 150mm C/C both ways, GI funnel with watering pipe, wire mesh,protection pipe, earth wire upto 7.50m long complete in addition to item No. 1(a) to (e) of preamble (Notes) under sub heading earthing, specified in SSR Part II. |
| 221 | S&FLED luminaire 600 mm x 600 mm, 36 watt, 220 V AC recessed type (Cool white & warm white) with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling/grid ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and as directed by Engineer-in-Charge. |
| 222 | Supply and laying or fixing or passing through pipe, 1100 volts grade heavy duty cable with PVC insulated stranded aluminium conductor served with an inner sheathing of PVC tape armoured with galvanized steel wire or strip and overall PVC sheathed, sq. 10 mm nominal cross section, 4 core in service connections as per IS 7098(Part 1) including connecting on LT OH line / LT panel /DB with suitable lugs, glands, binding wire etccomplete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
