|
| 1 | Item No.1:- Cleaning cutting thorny shrubs bushes, grass as directed with 15m lead and lift up to 1.5m. |
| 2 | Item No.2:-Excavation in all kinds of Soils & Soft murum including boulders up to 0.6 m diameter (0.113cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift. |
| 3 | Item No.3 :-Providing and laying in situ cement plaster 6 mm thick in C.M. 1:3 single coat wiyhout neru finish to concrete surface in all position including centering, scaffolding, curing etc. complete as directed. ( Cement 0.057 bags/Sqm) |
| 4 | Item No.4 :-Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. |
| 5 | Item No.5:- Providing and fabricating structural steel work in rolled sections like joists channels, angles, tees.etc as per detailed design and drawings or as directed including cutting fabricating, hoisting, erecting fixing in position making riveted bolted welded connections without connecting plates, braces etc and including one coat of antocorrosive paint and over it two coats of oil paintings of approved uality and shade etc. complete. |
| 6 | Item No. 6 :- Manufacturing with QAP & fabrication of KT weir needle gates - straight type size 2.15 x 0.5M- 94 Kg. weight as per relevant Indian Standards with all material, Mild steel confirming to IS 2062, Rubber seal confirming to IS 4623 & Welding electrodes AWS E6013 for general weld joints. It includes all materials, Labour charges, machinery charges, 1km lead charges of transportation, loading and unloading charges of Gate parts at Site, Inspection & Quality control charges, Sand blasting, Painting with one coat of Zinc rich primer on dry film to give total dry film thickness 70 +/- 5 microns and 2 coats of sloventless coal tar epoxy paint applied to give minimum dry film thickness of 150+/- 5 micron per coat as per IS 14177. |
| 7 | Item No. 7 :- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge. Please Enable Macros to View BoQ information |
