|
| 1 | Item No.1:- Cleaning cutting thorny shrubs bushes, grass as directed with 15m lead and lift up to 1.5m. |
| 2 | Item No.2:- Excavation in all kinds of Soils & Soft murum including boulders up to 0.6 m diameter (0.113cum) for canal, seating of embankment, filter drains / catch water drains etc., and placing the excavated stuff neatly in dump area or for formation of service road / embankment as directed including cost of all materials, machinery, labour, dressing bed and sides to required level and profile etc., complete with lead up to 15 m and 6m lift. |
| 3 | Item No.3 :-Excavation in Hard Rock By Chisseling including dressing sides dpositing the excavated material as and where directed etc completed with all leads and lift. |
| 4 | Item No.4 :-Providing and laying in situ cement concrete of grade M-15 of trap / granite / gneiss / quartzite / graded metal for PCC with or without surface reinforcement/RCC concreting requiring heavy or special type of shuttering for works of gallery, sluice, spillway crest, spillway downstream face, energy dissipating structures, intake structures, training walls, piers, abutments etc. with Concrete Mixer with shuttering and scaffolding, placing, compacting, curing with an initial lead of 1 km and all lifts etc. complete as directed. |
| 5 | Item No.5:- Providing and fixxing in position Mild Steeel / Hysd bar Reinforcement of Various diameter for RCC work, pip caps footing ,slab beam, column, canopies, chaja, linteels, coping, as per details drawing and schdule including, cutting, bending, hooking, binding with wire, tack welding and supporting as required as peer standard spcifications with all leads and lift .. etc compleeted |
| 6 | Item No. 6 :-Providing and fabricating structural steel work in rolled sections like joists channels, angles, tees.etc as per detailed design and drawings or as directed including cutting fabricating, hoisting, erecting fixing in position making riveted bolted welded connections without connecting plates, braces etc and including one coat of antocorrosive paint and over it two coats of oil paintings of approved uality and shade etc. complete. |
| 7 | Item No. 7 :- Manufacturing with QAP & fabrication o KT Weir nedls gates straight types size 2.15 x 0.5m - 94 Kg weight as pr relevent indian standard with all materials, mild steel confirming to 2062 Rubber seal confirming ti IS 4623 & welding electrodes AWS E6013 for general weld joints It Includes all materials, Labour charges, machinery charges 1 km lead charges of transportation , loading, and unloading charges of gates parts at site..etc compltd. |
| 8 | Item No. 8 :- Providing and fixing canal information board of 1.2 x 0.75 m prepared on 16 gauge M.S. sheet with angle iron frame of size 35 X 35 X 3 mm with cross bracing of size 25 X 25 X 3 mm including painting with one coat of zinc chromate storing primer and two coats each of green/white back ground and back side grey store enamelled bonded with red retro reflective sheet Engineering grade, border / letters / numeral / arrows coated with non pealable crystal clear protective transparent coat retaining 100% reflection including two angle iron post of size 50X50X5 mm of 3.65 m long inflated at bottom drilled on top and painted in white and black bonds of 30 cm with four numbers high strength of G.I. bolts and nuts of size 10 mm dia. and 20 mm long sheet and angle iron post in one piece without joints including all taxes, conveying, fixing in ground with cement concrete in M-15 block of size 60 X 60 X 75 cm as directed by engineer-in-charge. Please Enable Macros to View BoQ information |
