|
| 1 | Supply, installation, testing and commissioning (SITC) of electrical PCC panel with 800A MCCB incomer as per TSS-01 |
| 2 | Supply, installation, testing and commissioning of 630A, 4P (3P+100%N+PE), 415V Sandwich Copper Rising Mains with 2 runs of 50 x 6 mm tinned copper earthing strip, 50kA for 1 sec with Plug in Points at every floor with Multilayered Polyester Insulation, 50% Integral Earth, GI Housing (1.6mm thick), Paint: Epoxy powder finish Colour: RAL 7032. as per TSS-02as detailed below: |
| 3 | Straight length - Plug in type with Plug in Point |
| 4 | End feed unit with 630A, 50kA FP MCCB µP based release. |
| 5 | Rigid / Spring Hangers |
| 6 | Vertical Brackets |
| 7 | End Cover |
| 8 | TAP OFF BOX having 250A with 36kA TPN 4P MCCB + ROH + Spreaders (µP based release) along with suitable rating of MCCB and accessories, spreader link, rotary handle etc. |
| 9 | SITC of 3.5C X 240Sqmm, 1.1kV, Aluminium conductor, XLPE insulated, GI armoured, FRLS outer sheathedas per TSS-3 |
| 10 | SITC of 3.5C X 120Sqmm, 1.1kV, Copper conductor, XLPE insulated, GI armoured, FRLS outer sheathedas per TSS-4 |
| 11 | SITC of 3.5C X 25 Sqmm, 1.1kV, Aluminium conductor, XLPE insulated, GI armoured, FRLS outer sheathed Cableas per TSS-5 |
| 12 | SITC of 3C X 1.5 Sqmm, 1.1kV, copper conductor, FRLS insulated, unarmoured flexible Cableas per TSS-6 |
| 13 | SITC of 3C X 4 Sqmm, 1.1kV, copper conductor, FRLS insulated,flexible unarmoured Cableas per TSS-7 |
| 14 | End termination of 3.5C X 240 Sqmm, 1.1kV, Aluminium conductor, XLPE insulated, GI armoured, FRLS Cable as per TSS-8 |
| 15 | End termination of 3.5C X 120 Sqmm, 1.1kV, copper conductor, XLPE insulated, GI armoured, FRLS Cable as per TSS-9 |
| 16 | End termination of 3.5C X 25 Sqmm, 1.1kV, Aluminium conductor, XLPE insulated, GI armoured, FRLS Cable as per TSS-10 |
| 17 | SITC of 25mm X 3mm copper earthing strip as per TSS-11 |
| 18 | SITC of 50mm X 6mm GI earthing strip as per TSS-12 |
| 19 | SITC of earthing station as per TSS-13 |
| 20 | SITC VTPN Power Distribution Board8 way with 160A MCCB incomeras per TSS-14 |
| 21 | SITC of TPN power distribution board 8Way as per TSS-15 |
| 22 | SITC of BLDC 200mm X 200mm sweep PVC exhaust fan with guard and lours as per TSS-16 |
| 23 | SITC of 16 W, decorative LED lighting fixture cut out: 137 mm and depth 85mm COB type lighting fixture as per TSS-17 |
| 24 | SITC of 20W, LED batton type 4ft lighting fixture as per TSS-18 |
| 25 | SITC of 40W, LED Outdoor street lighting fixture as per TSS-19 |
| 26 | SITC ofsuspended type LED Linearlighting fixture with dimension 2200mm X 50mm X 70mm as per TSS-20 |
| 27 | SITC of 105mm X 50 mm PVC trunking with separator as per TSS-21 |
| 28 | SITC of electrical insulating mat as per TSS-22 |
| 29 | SITC of IP66, 20A, 4 C x 4 Sqmm power cable straight Connector as per TSS-23 |
| 30 | SITC ofIP66, 20A, 4 C x 4 Sqmm power cable T Connector as per TSS-24 |
| 31 | Design, manufacturing, supply and installation of equipment storage cupboard as per TSS-25 |
| 32 | Design, manufacture, supply and installation of M.S. Item fabricated out of MS angle, strip, sheet etc as per TSS-26 |
| 33 | Removal and re-installation of ceiling fan as per TSS-27 |
| 34 | Removal of existing PCC Panels as per TSS-28 |
| 35 | Removal of existing power cables as per TSS-29 |
| 36 | Removalof indoor lighting fixture as per TSS-30 |
| 37 | Only installation ofindoor lighting fixture as per TSS-31 |
| 38 | Removal and re-installation of lighting fixture as per TSS-32 |
| 39 | Excavation of hard soil with back filling and re-surfacing with PCC as per TSS-33 |
| 40 | Re-surfacing of floor with PCC as per TSS-34 |
| 41 | SITC of MCCB 600A, 50kA, 4P, microP release in a MS box as per TSS-35 |
