|
| 1 | Sch \"A\" Part-I (B/R Works)Demolition of cement concrete (unreinforced) in ground floors and paving n exc 15 cm the (below or above ground level), complete all as specified and directed. |
| 2 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for, complete all as specified and directed. |
| 3 | Demolition of Brick/stonework built in cement morter of any descrption incl all necessary quions arches piilars etc, complete all as specified and directed. |
| 4 | Dismantling of AC Sheets/CGI Sheets corrugated in roof coverings including ridges, complete all as specified and directed. |
| 5 | Dismantling of structural steel work including frames,gates, framed truss etc, complete all as specified and directed. |
| 6 | S & F Pre paintedcoloured galvalume aluminium Zink coating GI based corrugated steel sheet 0.50 mm thick of aprroved colour having tensile strength of 550 Mpaas in roof covering / Cladding to wall/curve, fixed with self tapping screws, complete all as specified and directed. |
| 7 | S&F 0.50mm thick plain, coloured galvalume aluminium zinc coated sheeting, alloy as in ridges, hips, valley gutter, drip and straight flashing of approved colour (length and girth as fixed), complete all as specified and directed. |
| 8 | M&L for Rolled Mild Steel confirming to Fe-410 in Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates, complete all as specified and as directed. |
| 9 | M&L for Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n exc 10cm long complete all as specified and directed. |
| 10 | Taking down cement plaster on brick/stone or conc surfaces including racking out joints hacking for key to any thicknessscrubbing down with water etc, complete all as specified and directed. |
| 11 | Taking down chowkhats with shutter (without taking off from shutter) exc 1.5 sqm and n exc 4 sqm each and removing to store and making good to surface disturbed due taking down, complete all as specified and directed. |
| 12 | Taking down chowkhats with shutter (without taking off from shutter) n exc 1.5 sqm each and removing to store, complete all as specified and directed. |
| 13 | Taking down GI water tubingof 15 mm bore and connection and incl cleaning for refixing or removel, complete all as specified and directed. |
| 14 | Taking down GI water tubing of 20 mm bore and connection and incl cleaning for refixing or removel, complete all as specified and directed. |
| 15 | M&L for walling of random rubble, uncoursed, well bonded, bedded solidly hearted, built in cement mortar (1:6) complete all as specified and directed. |
| 16 | All as per item No 15.00 here-in-before but except stone. |
| 17 | M&L for brick work in cement mortar (1:6) using old size sub class \"B\" bricks in walling, straight or curved on plan exc 6m mean radius, complete all as specified and directed. |
| 18 | M&L for 15 mm thick rendering in cement mortar (1:6) onnew fair faces of brick/stone/ concrete surfaces of walls, finished even & smooth without using extra cement, complete all as specified and directed. |
| 19 | M&L for20 mm thick rendering on faces of stone /concrete surfacesin cement mortar 1:4 and finishedeven and smooth without using extra cement with water proofing, complete all as specified and directed. Note:- Water Proofing Compound shall be measured separately. |
| 20 | M&L for providing and injecting Along the external wall below concrete or masonry apron using post Antitermite Treatment chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron , complete all as specified and directed. Note: The treatment work shall be carried through authorised agencey only. |
| 21 | M&L for cement concrete type C-2, 1:3:6 (using 40mm graded stone aggregate) 75 mm thick as in plinth protectionlaid in slope 1:12 from outer edge of the wall finished even and fair ,laid in alternate bays including providing 6 mm wide joints through out the thickness of plinth protection in concrete bays and in between walling and plinth protection,joint filled mastic filling comprising of one part of heated bituminous 85/25 and 3 parts of sand (all by weight) complete all asspecified and directed. |
| 22 | M&L for coloured glazed ceramic tiles on vertical surface of size (450x300x7 mm thick ) set and jointed in neat cement slurry and pointed with white or coloured cement to matchthe colour of tiles,laid over and including 10mm thick rendering in CM(1:4) complete all as specified and directed . |
| 23 | S&F 150mm ordinary rat tail rod pattern springs including roller plate, complete all as specified and directed. |
| 24 | S&F Aluminium handles, cast type, anodised 150mm long, complete all as specified and directed. |
| 25 | S&F aluminium, anodised barrel tower bolts of extruded section and fixed of size200 mm long, complete all as specified and directed. |
| 26 | S&F aluminium alloy anodised sliding door bolt with fixing bolts and sliding bolts of extruded section or cast aluminium alloyand fixed of size200 mm, complete all as specified and directed. |
| 27 | M&L for steel water tubing medium grade galvanised with all fittings including short lengths, fixed to walls, concealed in wall and ceiling or laid in floor complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore 15 mm, complete all as specified and directed. |
| 28 | S&F steel water tubing medium grade galvanised with all fittings including short lengths, laid in trenches complete with all fittings (such as bends, elbows, Tee, short pieces, connectors, back nuts, diminishing pieces, caps and plugs, unions etc.) of nominal bore dia 20 mm, complete all as specified and directed. |
| 29 | S&F in repair Bib tap cast copper alloy with crutch or butterfly handle, chromium plated fancy type screwedfor iron pipe, suitable for 15 mm bore, complete all as specified and directed. |
| 30 | S&F in repair Stop/ Angle valve cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed for 15mm dia pipe, complete all as specified and directed. |
| 31 | S&F in repair pillar tap brass chromium plated fency type 15mm bore, complete all as specified and directed. |
| 32 | Supply and fix in repairs of CP brass WHB/Sink mixer for hot and cold water mixing of 15mm dia screwed down for iron pipe, complete all as specified and directed. |
| 33 | S&F PVC connection 15 mm x 450 mm including brass check nut at both ends screwed for iron pipe of 15 mm bore, complete all as specified and directed. |
| 34 | S&F in repair wash basin of size 550x400mm, vitreous china (flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand, complete all as specified and directed. |
| 35 | S&F in repair 32mm waste fittings, brass, chromium plated for glazed ware basins, etc with long screwed shanks and fly-nuts, flange end bedded in red lead cement and other end fixed, complete all as specified and directed. |
| 36 | S&F in repair SS Grating of 100 mm dia, fixed in repairs, complete all as specified and directed. |
| 37 | S & F in repair for 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thickcommercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers, complete all as specified and directed. |
| 38 | S & F in repair for Sheet glass shelf assembly consisting of 5.5mm thick and 12cm wide sheet glass shelf ,with chromium plated bracket guard and railing 60cm long, complete all as specified and directed. |
| 39 | M&L for Preparing new plastered surfaces of walls and applying two coats of oil bound distemper over 1.00mm thick one coat of wall care putty, complete all as specified and directed. |
| 40 | M&L for preparing new wall surfaces and applying two coats of cement base paint, complete all as specified and directed. |
| 41 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 500 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I Incl dismantling of existing tank and removing to store, complete all as specified and directed. |
| 42 | Supply only water liquid water proofing compound conforming to IS, complete all as specified and directed. |
| 43 | S&F in repair sink with drainage board made of stainless steel 0.8 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. |
| 44 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed bed laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incurring rubbing and polishing over and including 20 mm thick screed bed in CM 1:6 incl dismantling and rounding/moulding of edges, complete all as specified and directed. |
| 45 | M&L for machine cut kota stone slab flooring 18-20mm thick over cement screed bed in rider of steps,skirting,dado,pillars laid and jointed with grey cement slurry mixed with pigment to match the shade of slab incurring rubbing and polishing over and including 10 mm thick screed bed in CM 1:3 incl dismantling and rounding/moulding of edges, complete all as specified and directed. |
| 46 | M&L for RCC type B1 1:2:4 (20mm graded aggregate ) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies,canopies, deck slabs and in shelves and the like, complete all as specified and directed. |
| 47 | M&L for 16-18 mm thick granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, laid over and including 20 mm thick CM (1:4) incl rounding the edges, cutting polishing, complete all as specified and directed. |
| 48 | Formwork to sides and soffits of slabs, landing, shelves and the like for rough finish, complete all as specified and directed. |
| 49 | S&F in repair stainless steel kitchen plate rack of overall approx size 24\" x 24\" x 10\", complete all as specified and directed. |
| 50 | M&L for factory made 100% Solid WPC Door Frame 125mm x 65mm Double Rebated made from Wood Polymer Composite ( Single Extruded Section Process) Material comparising of virgin PVC polymer of K value 57-60 ( suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive fabricated with frame density of 780 Kg/cbm &manufactured by \"RAJSHRI\" an ISO 9001-2015 Certified Company, having good screw holding capacity ( Screw Withdrawl Strength of Min. 900N),Minium Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed. |
| 51 | M&L for factory made 100% Solid WPC Door Frame 90mm x 45mm Single Rebated made from Wood Polymer Composite ( Single Extruded Section Process) Material comparising of virgin PVC polymer of K value 57-60 ( suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive fabricated with frame density of 780 Kg/cbm &manufactured by \"RAJSHRI\" an ISO 9001-2015 Certified Company, having good screw holding capacity ( Screw Withdrawl Strength of Min. 900N),Minium Compressive Strength of 58 N/mm2, Modulus of elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant & Fixed in position with SS Dash Fasteners / Hold Fast of required dia and length, all as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed. |
| 52 | M&L for Factory made 30mm thick 100% Solid WPC Laminated MouldedDoor Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive, made from Extrusion process WPC foam sheet Single Extruded (inner) with having minium density not less than 650 Kg/cbm manufactured by \"RAJSHRI\" an ISO 9001-2015 Certified Company,having good screw holding capacity ( Screw Withdrawl Strength of 2000N(face) & 1100N (Edge), Minium Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant. WPC to be laminated with PVC foil of minium 14 micron thick of approved design pasted on both faces of shutter & Fixing Stainless Steel Butt Hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed. |
| 53 | M&L for Factory made 30mm thick 100% Solid WPC Laminatedskeleton Door Shutter of required size comprising of virgin PVC resin of K value 57-60 (Suspension Grade), Calcium Carbonate and Natural Fibres ( Wood Powder/Rice Husk/Wheat husk) and Non toxic additive, made from Extrusion process WPC foam sheet Single Extruded (inner) with having minium density not less than 650 Kg/cbm manufactured by \"RAJSHRI\" an ISO 9001-2015 Certified Company,having good screw holding capacity ( Screw Withdrawl Strength of 2000N(face) & 1100N (Edge), Minium Compressive Strength of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof & Fire retardant. WPC to be laminated with PVC foil of minium 14 micron thick of approved design pasted on both faces of shutter & Fixing Stainless Steel Butt Hinges of required size with necessary full body threaded star headed counter sunk SS Screws. All as per specifications drawings as directed by the Engineer-In-Charge. Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and directed. |
| 54 | M & L for powder coating of any colour aluminium frame for doors, windows, ventilators and shutters of sizes as directed by Engineer in charge with one or more rebates including joining cleats for fixing etc, complete all as specified and directed. |
| 55 | M & L for powder coatedaluminium window and ventilator shutters of any colour side hung type without sash, aluminium sections weighing 0.55 Kg/M including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (1 No) hinges type B-21 100 mm long (3 Nos) suitable handle (2 Nos), complete all as specified and directed. |
| 56 | S&F Aluminium anodized grills 7-8 mm dia decorative type 75mm mesh size, complete all as specified and directed. |
| 57 | M&L for Reinforced Cement Concrete (nominal mix) typeB1 (1:2:4) using 20 mm graded stone aggregateinBeam, cantillevers, bressumers, lintels etc, complete all as specified and directed. |
| 58 | Formwork to edges of rough finished concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all exceeding 20cm wide, complete all as specified and directed. |
| 59 | M&L for mild steel TMT bars above 10 mm dia cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip.and necessary welding, complete all as specified and directed. |
| 60 | M&L for mild steel TMT bars above but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders cut out length bent to shape including cranking, bending and binding with 0.9mm dia mild steel wire or securing with clip.and necessary welding, complete all as specified and directed. |
| 61 | Providing, cement concrete type B-0 (1:2:4) (12.5 mm graded aggregate in roof kerbs, mud stops, rounded or chamfered on edges, parapets and railings upto 60 cm in height, copings,holdfast, kneelers etc, complete all as specified and directed. |
| 62 | M&L for White Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marbleshade and laid over and including 20 mm thick CM (1:4) cutting polishing, complete all as specified and directed. |
| 63 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil, complete all as specified and directed. |
| 64 | M&L for Steel as in Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed. |
| 65 | M&L for Pre-cast factory made cement concreteType B-1 (1:2:4) (using 20mm graded stone aggregate), block masonry with solid blocks, exc. 10 cm in width and setting in mortar 1:6, complete all as specifed and directed. |
| 66 | S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised, complete all as specified and directed. |
| 67 | M&L for 19-20 mm Pre laminated board interior grade cupboard shutter, both sides laminated including beading & leaping, complete all as specified and directed. |
| 68 | M&L for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steelsheeting or other covering, running rails and guides) and hanging;also fastening and fixing Fe 290 Gde-E-165, complete all as specified and directed. |
| 69 | S & F for 50mm, 4 Lever, BrassLock of cupboard, grade-I, complete all as specified and directed. |
| 70 | Excavation in trenches n exc 1.5 m deep and n exc 1.5 m width and getting out in soft/loose soil, complete all as specified and directed. |
| 71 | Returning filling in including spreading watering well ramming in layers n exc 25 cm thick with soil, complete all as specified and directed. |
| 72 | Removing of surplus soil to a distance n exc 50 m and depositing where directed at a level n exc 1.50 m above the starting point, complete all as specified and directed. |
| 73 | M&L for 75mm thick cement concrete type C-2,1:3:6 (using 40mm graded stone aggregate) as in sub base etc, complete all as specified and directed. |
| 74 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and no pigment, complete all as specified and directed. |
| 75 | M&L for chequered cement concrete tiles of 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in path with grey cement and no pigment over & including 15mm thick screed bed in CM (1:6), complete all as specified and directed. |
| 76 | M&L for Hardcore of guage exc 63mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface, complete all as specified and directed. |
| 77 | M&L 5 mm thick rendering in cement mortar (1:6) onnew fair faces of brick/ concrete surfaces of ceilings, finished even & smooth without using extra cement, complete all as specified and directed. |
| 78 | M&L for preparing old decorated plastered ceiling and applying one coat of oil bound distemper, complete all as specified and directed. |
| 79 | M&L for preparing new wall surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives@ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces, complete all as specified and directed. |
| 80 | M&L for one coat of synthetic enamel paint on old steel surfaces including preparation of surfaces, complete all as specified and directed. |
| 81 | M/L for colouredNon skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to matchthe colour of tiles over and including 10mm thick screed bed in CM (1:4), complete all as specified and directed. |
| 82 | M&L for light shade Vitrifiedcoloured tiles 7-8 mm thick(square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, laid over and including 10mm thick screed bed in CM(1:4) in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match, complete all as specified and directed. |
| 83 | M&L for Light shade Vitrifiedtiles 7-8 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, laid over and including 10mm thick rendering in CM(1:4) in dados /skirting jointed in neat cement slurry & pointed in white or coloured cement to match complete, complete all as specified and directed. |
| 84 | S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified and directed. |
| 85 | S&F Factory made solid PVC moulded Door Shutter with particle board core, 28 to 30mm thick (stiles) with 2, 4 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed. |
| 86 | S & F galvanised mild steel wire cloth 0.56mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks of galvanised wire staples, complete all as specified and directed. |
| 87 | S&F Curtain Rod ofAluminium alloy 25 mm dia fancy type complete and hanging hooks/brackets / end caps of length 1.5 mtr to 1.8 mtr, complete all as specified and directed. |
| 88 | Supply and fix in repairs of CP brass wall mixers 2 in 1two for hot and cold water mixing and one for shower rose of 15mm dia screwed down for iron pipe, complete all as specified and directed. |
| 89 | S&F in repair Viterous china wash down water closet pan (pedestal pattern ), white (excluding flushing cistern, flush pipe, complete all as specified and directed. |
| 90 | Supply only in repair PVC low level flushing cistern 10 ltrs capacity white with inlet ball value, float valve and handle incl brackets, PVC flush pipe, complete all as specified and directed. |
| 91 | M&L in repair for 75 mm PVC (SWR) floor trap, plain with grating including jointingwith solvent cement, complete all as specified and directed. |
| 92 | S&F in repair PVC SWR pipes 110 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors,walls with steel clamps, complete all as specified and directed. |
| 93 | S&F in repair PVC SWR pipes 75 mm bore single socketed in any length with rubber ring joint fixed to or laid in trenches or in floors with steel clamps, complete all as specified and directed. |
| 94 | S&F in repair 110 mm bore PVC (SWR) bend any radius, complete all as specified and directed. |
| 95 | S&F in repair chromium plated shower roses of size 125mm with or without swivel joints, any size, including fixing to steel pipe or union, complete all as specified and directed. |
| 96 | S&F in repair tubular towel rail 20mm dia, D type, chromium plated 60cm long between flanges, complete all as specified and directed. |
| 97 | S&F in repair for brass CP soap dish incl brass CP screws and wooden cleats, complete all as specified and directed. |
| 98 | S&F rotational moulded polythene water storage tank (Cylindrical vertical withclosed top)hoisted and fixed in position of 1000 ltrs capacity fixed with PVC tank nipples, complete all as specified in SSR Part I Incl dismantling of existing tank and removing to store, complete all as specified and directed. |
| 99 | Complete removal of existing water proofing treatment over RCC roof, projections of any thickness, any type by stripping out old tar felt over roofs, parapets, chimney stacks etc laid horizontally or vertically including taking out layer of cement plaster etc and cleaning the surface with wire brush including removing debris from the site and depositing inlow lying area where directed and providing following :- (a)Rendering 10mm thick in cement mortar 1:3on concrete roof surfaces and finish the surface even and smooth without using extra cement including mixingwater proofing compound @ 2% by weight of cement.(b)Apply a coat of bituminous primer confirming to IS-3384@ 0.4 ltr/Sqm on newly plastered surface after curing as per IS-456 and dried.(c)After the primed surface has dried, apply a coat of hot blown bitumen(85/25 penetration) confirming to IS-702 @ 1.2 Kg/Sqm of the surface. (d)Provide polymeric water proofing membrane ISI marked laid with overlaps, bonded with hot blown bitumen, and laid by torch application method, end overlaps shall not be less than 150mm and side lap 75mm. Polymeric water proofing membrane should be five layered with centre core as 90 micron high molecular high density polyethylene film, min weight 3 Kg per sqm & minimum 3mm thick reinforced with polyster non wove fabric, APP membrane shall laid acorss the slop from lowest line of sloping roof towards ridge.(e) Over the APP membrane, apply a coat of semi hot blown 85/25 penetration grade bitumen confirming to IS-702 @1.20 Kg/ sqm and blinded with fine sand in dry condition @ 0.50 Kg / Sqm dusted over the bitumen coat. Note : (i) Care shall be taken to avoid wrinkle and air gaps while sticking membrane to the bitumen applied surface. (ii) Ponding test shall be conducted for 72 hrs as directed.\" |
| 100 | S&F 100 mm long stainless steel butt hinges, medium weight cold rolled, complete all as specified and directed. |
| 101 | S&F in repair cupboard shutter 20mm thick(style) factory made panel PVC incl chowkhat frame made out of MS. tubes 19 gauge for top and bottom rails m.s frame shall be covered with heated moulded plain colour PVC channel having a PVC Sheet strip of 10mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail lock rail and bottom rail on either side 10mm (5mmx2) thick of 20mm and 20mm cross PVC sheet and as gap insert for top and bottom rail. Panelling for plain colour PVC sheet to be fitted in the m.s frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement supplying fixing in the frame at site as per specification, complete all as specified and directed. |
| 102 | Sch \"A\" Part-II (E/M works)Taking down unserviceable aluminium point wiring (light, fan, bell, socket or power) complete, including all fitting and fixtures such as switches, ceiling roses, pendants, regulators sockets, light fittings etc.) removing material for taking credit (credit for above items should be made as per conditions separately) and making good the disturbed, complete all as specified and directed. |
| 103 | M&L for point wiring with two single core 1.5 sqmm (nominal cross section area FRLS PVC insulated unsheathed copper conductor cable and one single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed 1100 Volts, grade multi stranded copper conductor cable as earth continuity to common earth and connecting to earth dolly running in and including medium grade rigid non metalic PVC concealed conduit in wall after cutting chases in wall including cast iron or pressed steel terminal box covered with and including 3mm thick bakelite sheet top cover fixed flush with wall using brass screws, washers and all requisite accessories such as PVC elbow, Tee, collars, bends etc for mounting switches, socket, fan regulators etc for one light/ fan exhaust fan point controlled by one way switch 6 Amp, complete all as specified and directed.Note: The colour coding of wiring to be followed as Red/ Yellow/ Blue Phase/ Neutral/ Earth respectively. |
| 104 | All as per Item No 103.00 here-in-before but for socket outlet 5 Amp on same board. |
| 105 | All as per Item No 103.00 here-in-before but for socket outlet 5 Amp on independent board. |
| 106 | All as per item No 103.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead. |
| 107 | M&L for point wiring for one light point/ fan point/ one bell/ buzzer point controlled by one switch with 1.5sqmm PVC insulated FRLS unsheathed copper conductor two single coremulti strand flexible cable and 1.5sqmm PVC insulated FRLS unsheathed copper conductor single core cable (green colour) as earth lead and including PVC conduit along with modular sunken boxes of required size with modular white cover plate with frame including cutting chases to wall making good the disturbed surfaces to match with the existing specification, complete all as specified and directed. |
| 108 | All as per Item No 107.00 here-in-before but for socket outlet 5 Amp on same board. |
| 109 | All as per Item No 107.00 here-in-before but for socket outlet 5 Amp on independent board. |
| 110 | All as per Item No 107.00 here-in-before but for one bell point controlled by one push botton. |
| 111 | All as per item No 107.00 here-in-before, but for one 3 pin 15 Amp socket outlet independent with 2.5 sqmm PVC insulated FRLS multistranded copper cable with 2.5 sqmm single core multistranded FRLS copper cable as earthling lead. |
| 112 | M&L for switch piano flush type 5 Amps SP one way 230 volts, complete all as specified and directed. |
| 113 | M&L for modular switch piano, 1 module, 6 Amps SP one way 230 volts, complete all as specified and directed. |
| 114 | M&L for modular switch piano, 1 module single pole, one way 16 Amps 240 volts, complete all as specified and directed. |
| 115 | M&L for socket outlet 2 in 1, 5 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed. |
| 116 | M&L for modular socket outlet 2 in 1, 6 Amps, 2/3 Pin, flush type, 230 volts, complete all as specified and directed. |
| 117 | M&L for modular socket outlet 2 in 1, 6/16 Amps, 6 Pin, flush type, 230 volts, complete all as specified and directed. |
| 118 | S&F for switch socket combination 2 in 1, 15 Amps, 5 Pin, flush type, 230 volts, complete all as specified and directed. |
| 119 | S&F modular bell push 6A, 1 module, ISI marked, complete all as specified and directed. |
| 120 | S&F ding dong bell AC 230 volts, single pole, complete all as specified and directed. |
| 121 | M&L for ceiling rose surface bakelite 3 terminals, PVC/ Polycarbonate, isolated body, complete all as specified and directed. |
| 122 | S&F modular stepped type elctronic fan regulator heavy duty flush type, complete all as specified and directed. |
| 123 | S&F in replacement lamp holder insulated body PVC/ Polycarbonate type with back plate suitable for batten/ angular/ pendent fittings, complete all as specified and directed. |
| 124 | S&F LED lamp 7 watt suitable for lamp holder, complete all as specified and directed. |
| 125 | M&L in replacement for LED Tube light fitting, complete with 1x 20 watts, 220V, AC decorative box type with driver, holder in andincluding LED tube light connection complete prewiredand connecting electrically to ceiling rose to fitting using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core and connector block etc and necessary fixing arrangement at any height, complete all as specified and directed. |
| 126 | S&F in replacement LED luminaire 600 x 600 mm, 36 watt, 220 Volts, AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivber, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size, complete all as specified and directed. |
| 127 | M&L for exhaust fan, plastic body, 4 blade, heavy duty, double ball bearing, 230V, 50Hz, 250mm sweep having power input 70W speed 1200RPM, with protective bird guard including connecting with three core, 0.75 sqmm PVC insulated copper conductor cable complete all as sepecified and directed. |
| 128 | Supply and fixing in replacementLED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as sepecified and directed. |
| 129 | S&F in replacement of sheet metal enclosure MCB DB, SPN 240 volts 8 way with IP-43 IK-09 protection double door 200A complete with appropirate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specificaiton, complete all as specified and directed.Note: MCBs will be measured separately. |
| 130 | S&F in replacement of sheet metal enclosure MCB DB, SPN 240 volts 12 way with IP-43 IK-09 protection double door 200A complete with appropirate size bus bar and neutral link, fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces to match with existing specificaiton, complete all as specified and directed.Note: MCBs will be measured separately. |
| 131 | Supply and fixing in replacement LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, complete all as specified and directed. |
| 132 | Taking out unserviceable ceiling fan and deposit to MES Store, supply and replacement with ceiling fan 230V, 50 Hz, AC, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete with hanging arrangement by down rod and electronic regulator alongwith steel wire rope for additional safety in ceiling fan with all allied accessories and connecting up with three core, 0.75 sqmm PVC insulated copper conductor cable, complete all as specified and directed. |
| 133 | M&L for MCB single pole and neutral 240 volts any rating upto 32 Amps, with rupturing capacity 10 KA,including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed. |
| 134 | S&F MCB DB TPN 4 way with 200 Amps rates busbar 415V double door confirming to IP-43-IK, complete with din rail, Neutral and Earthing bar, complete all as specified and directed. |
| 135 | S&F for MCB single pole 240 volts any rating upto 6 to 32 Amps, with rupturing capacity 10 KA,including providing thimble for out going cables, including removing old/unsv, complete all as specified and directed. |
| 136 | S&F Miniature Circuit Breaker (MCB) TPN, 63 Amp, 415V, 10KA \"B\" curve in the DB complete with connection testing and commissioning, complete all as specified and directed. |
| 137 | M&L in replacement for submain wiring with two single core PVC insulated FRLS unsheathed, FRLSH flexible copper conductor cable of size 6.0 sqmm and one single core PVC insulated unsheathed, FRLSH flexible copper conductor cable (green color) of size 6 sqmm as earth lead in & including PVC casing caping/ non metallic rigid PVC conduit medium grade and making goog the disturbed wall surfaces to match with existing specififcation all as required at site, complete all as specified and directed. |
| 138 | Supply and fix electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc, complete all as specified and directed. |
| 139 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 2 core, complete all as specified and directed. |
| 140 | Supply, laying and testing in replacement cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4 core, complete all as specified and directed. |
| 141 | M&L in replacement for earthing with galvanised steel earth plate electrode 600mm x 600mm x 6 mm burried directly in ground earth pit not less than 2.25 mtr deep below normal ground level with top edge of the plate vertically to a depth not less than 1.5 mtr below ground level connected to connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No. 3 including GI pipe 15 mm dia light grade for protection to the extend of7.5 mtr as earthing lead connecting to equipment with provn charcol and salt complete includingPCC chamber with RCC cover watering arrangement with GI pipe 20 mm dia medium grade and MS funnel, including excavation and earth work and returning, filling in including ramming and removal of surplus soil and testing on completion complete. |
