Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Dismantling of floor, hearth or wall tiling incl cement mortar bedding (but not backing) removing tiles from site and rubbish off the premises complete all as directed by Engr-in-Charge. |
| 2 | Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.06 sqm but n exc 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 15 mm screed bed in 1:6 complete all as directed. |
| 3 | Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 15 mm screed bed in 1:6 complete all as directed. |
| 4 | Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed. |
| 5 | Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 15 mm screed bed in 1:6 complete all as directed. |
| 6 | Supply and fix non skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.38 sqm in skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of the tiles over and incl 10 mm rendering in CM 1:3 complete all as directed. |
| 7 | Material and labour for 300mm X 450mm X 7-8mm thickdecorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed by the Engr-in-Charge. |
| 8 | Material and labour for 300mm X 600mmX7-8mm thickdecorative type wall tiles (coloured) joint free as in vertical surfaces of and jointed with neat cement slurry and pointed in white/coloured cement to match the surface laid over and including 10mm thick rendering in CM(1:3) complete all as specified and as directed by the Engr-in-Charge. |
| 9 | Supply and fix vitrified tiles(light shade) of 9-10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqmas in floor set and jointed in neat cement slurry @ 3 kg per Sqm and pointed in coloured cement to match the shade of the tiles over and incl. 15 mm screed bed in CM (1:6) complete all as directed. |
| 10 | Supply and fix vitrified tiles (light shade) of 9-10 mm thick (square/ rectangular) polished, area of each tiles exc 0.18 sqm but not exceeding 0.36 sqm as in skirting set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tiles over and incl. 10mm rendering in CM (1:3) complete all as directed. |
| 11 | M&L Vitrified ceramicjoint free colour tilesarea of each tile exc0.42 Sqm but n exc exc 1.0 Sqmand 9 to 10 mmthick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement completeincluding 15 mm thick screed bed cement mortar 1:6 completeall as specified and directed. |
| 12 | M&L Vitrified ceramicjoint free colour tilesfor Vertical surface of area of each tile exc0.42 Sqm but n exc exc 1.0 Sqmand 9 to 10 mmthick, in floors etc, set and jointed in neat cement slurry and pointed in coloured cement completeincluding 10 mm thick screed bed cement mortar 1:3 completeall as specified and directed. |
| 13 | Taking down cement plaster in any descriptionon brick or stone wall etc incl racking outjoints. Hacking for key scrubbing down with water etc completeall as specified and directed. |
| 14 | Material and labour for 20 mm thick rendering in cement mortar (1:4), in two layers, each 10 mm thick, to fair faces of brick or concrete wall surfaces, top layer mixed with water proofing compound (@ 3 % by weight of cement or as per manufacture\"s instructions), finished rendering surface even and smooth(without using extra cement). (Note :Water proofing compound to be measured and paid separately as \"Supply only\") |
| 15 | M&L for 15mm thick cement plaster in cement mortar 1:4 on bricks or concrete surface and finished even and smooth without using extra cement including necessary scaffolding work all as specified and directed by Engr -in-Charge. |
| 16 | M&L for 15mm thick rendering in cement mortar (1:6) to fair faces of brick or concrete wall surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 17 | M&L for 10 mm thick rendering in cement mortar (1:4)to fair faces of brick or concrete ceiling surfaces finished even & smooth without using extra cement all as specified and directed by Engineer -in-Charge. |
| 18 | Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc all as specified and directed by Engr-in-Charge. |
| 19 | M&L brick work with Fly ash bricks old size brick straight or curved on plan exc 6 m mean radius built in cement mortar 1:6 complete all as specified and directed. |
| 20 | M&L brick work with Fly ash bricks\" old size brick straight or curved on plan to any radius built in cement mortar 1:4 as in half brick thick wall complete all as specified and directed. |
| 21 | M&Lforapplying one coat of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 22 | M&Lforapplying two coats of oil bound distemper to old decorated (distempered) surfaces of wall including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 23 | M&L for complete removal of existing treatment of old wall surface and applying two coats of oil bound distemper over a coat of alkali resistant primer applied over 1 to 2mm thick BIRLA/JK water proof wall care putty complete all as directed by Engr-in-charge. |
| 24 | M&Lforapplying one coat of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 25 | M&Lforapplying two coats of oil bound distemper to old decorated (distempered) surfaces of ceiling including preparation of surface (by brooming down or steel wire brushing, scrapping down smoke, soot, moulds, moss, efflorescent salts, trading oil and greasy spots) complete all as specified and directed by Engineer -in-Charge. |
| 26 | Material & Labour for applying Two or more coatsof 100% Premium acrylic emulsion paint havingVOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed |
| 27 | M & L Preparation of old surface of walls and soffits of Chajja, roof slab etc, by cleaning brooming, rubbing and scrapping as required using broom, emery paper, putty blade/ scraper as applicable to make the surface free from loose paint, algae formation dust etc including necessary safety & protective measures such as safety belt, headgear etc including filling cracks upto 2 mm thick exterior wall puttyfor smooth finish and finishing with one coat of weather proof exterior emulsion paintof approved make using airless spray technology capable of operating single spray gun with hose of adequate length and necessary scaffolding for upto 4 storey building height complete all as specified and directed. |
| 28 | M&L for preparation of newly plastered ceiling surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer complete all as specified and directed by Engineer -in-Charge. |
| 29 | M&L for preparation of newly plastered wall surfaces and applying two coats of Oil Bound Distemper over a coat of alkali resistant primer applied over 1 to 2 mm thick plaster of Paris complete all as specified and directed by Engineer -in-Charge. |
| 30 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar completeall as specified and directed. |
| 31 | S&F20 mm thick granite slab cut bedded and jointed with grey cement slurry and pointed with white cement with admixture of pavement to match the shade of granite stone incl grinding and polishing overand including 20mm screed bed in CM(1:6) completed all as directed. |
| 32 | M&L pre polishedChequered cement concrete 25mm thick& area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm in floors set , jointed & pointed with neat cement slurrywith grey cement and pigment including15 mm thick screed bedor bedding layer incementmortar (1:6)overbrushing with neat cement slurry with 3.00 Kg of cement per sqm completed all as specified and directed. |
| 33 | M & L forheavy duty coloured ceramic floor tiles of size 300 x 300x 10 mm thick, suitable for high traffic external tiles, anti skid, scratch resistance and neutral to UV rays and acid alkali resistance as in floor including 15mm thick screed bed in cement mortar 1:4 complete all as specified anddirected.(MAKE : JOHNSON, Model : ENDURA or equivalent model in other makes listed in the tender) |
| 34 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for all as specified and directed by Engr-in-Charge. |
| 35 | M&L 75 mm thick PCC 1:3:6 type C2 (using 40mm graded crushed stone aggregate) as in plinth protection/Paving etc, finished even and smooth without using extra cement as directed by the Engr-in-Charge. |
| 36 | M & L 40 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring, laid in alternate bays, surface finished even and smooth using without extra cement complete all as specified and directed. |
| 37 | S&F in repair chromium plated Hand shower (health faucet), brass body with 1.2 metre long flexible tube in chrome finish with wall hook complete all as specified and directed.(MAKE : JAQUAR, Cat No : ALD-573/ PARRYWARE, Cat No : T9941A1 / ESS ESS, Cat No: C-232D / CERA, Cat No: F8030401AB / HINDWARE, Cat No: F160002) orequivalent make specified in tender. |
| 38 | S&F in repair various china coloured flat back counter top wash hand basin of size 560mm x 430mm incl providing 32mm dia CP wasted coupling, CP bottle trap bracket, 32mm dia PVC waste pipe including taking down/out unserviceable Wash Hand Basin and making all necessary connections as di reacted by Engr-in-Charge. |
| 39 | S&F in repair various china white flat back counter down wash hand basin of size 560mm x 430mm incl providing 32mm dia CP wasted coupling,CP bottle trap bracket, 32mm dia PVC waste pipe and making all necessary connections, fixed as directed by Engr-in-Charge. |
| 40 | S&F in repair 15 mm Bore Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms/20mm 125gms).complete all as specified and directed. |
| 41 | S& F in repair 15 mm bore Stop valves/Angular stop valve, cast copper alloy, screweddown, highpressure, withcrutch orbutterfly handle, screwed both ends foriron pipe orfor unions and fixed |
| 42 | S&F in repair 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 43 | S&F in repair Vitreous China wash basin, white, flat back, including bracketssize 550x400mm(flat back or angle back type) any size, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pip complete all as specified and directed. |
| 44 | S&Fin repair Chromium plated brassAngular stop cock, fancy type,concealed type with wall flange fixed to 15 mm bore of Iron pipe complete all as specified and directed.(Make : JAQUAR, Cat No: CON-59KN / PARRYWARE, Cat No: G1453A1 / ESS ESS, Cat No: C-206 / CERA, Model: OCEAN / PRAYAG, Cat No: 9210 / HINDWARE, Cat No: F330043) or equivalent make specified in tender. |
| 45 | Supply and fix, as in repair, 15 mm bore bib taps, fancy type, chromium plated long neckcast copper alloy with crutch or butter fly handle, screwed down, screwed for iron pipe or for brass ferrule all as specified. |
| 46 | Supply and fixed fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe complete al as specified and directed. |
| 47 | S&F in repair Chromium plated brassWall mixer, concealed type, with concealed body, with overhead shower arrangement fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-273KNUPR / PRAYAG, Cat No: 9275 / CERA, Model: OCEAN / PARRYWARE, Cat No: G1417A1 / HINDWARE, Cat No: F200020 / ESS ESS, Cat No: C-216) orequivalent make specified in tender. |
| 48 | S&F in repair Chromium plated brassWall mixer, concealed type incl concealed body, with both overhead and telephone shower arrangement, fixed with 15 mm bore Iron pipe including taking down existing mixer complete all as specified and directed. (Make : Jaquar, Cat No : CON-281KN / PARRYWARE, Cat No: G1417A1 / ESS ESS, Cat No: C-218 / CERA, Model : OCEAN / PRAYAG, Cat No: 9280 / HINDWARE, Cat No: F200022)orequivalent make specified in tender.NOTE: Telephone shower shall be measured and paid separately. |
| 49 | S&F in repair 15mm dia fancy type chromium plated basin mixer foam flow screwed for iron pipe incl taking down old all as directed by Engr-in-Charge. (MAKE : ESS ESS, Cat No : C-211A / JAQUAR, Cat No : CON-167KNB / PARRYWARE, Cat No: G1414A1 / CERA, Model: OCEAN / PRAYAG, Cat No: 9250 / HINDWARE, Model: CONTESSA PLUS) orequivalent make specified in tender. |
| 50 | S&F in repair 15mm bore chromium plated two way bib cock with flange, fancy type complete all as specified and as directed.(Make : Ess Ess, Cat No: C-203 / JAQUAR, Cat No: CON-041KN/ PARRYWARE, Cat No: G1434A1/ CERA, Model : OCEAN / PRAYAG, Cat No: 9212/HINDWARE, CAT No: F330004CP) orequivalent make specified in tender. |
| 51 | S&F in repair Chromium plated brass Towel ring (premium quality) complete all as specified and directed. (Make : Ess-Ess, Cat No: AC-502 / JAQUAR, Cat No: ACN-1121BN / PARRRYWARE, Cat No: T6002A1 / PRAYAG, Cat No: BA-11 orequivalent make specified in tender. |
| 52 | Supply & fix, as in repairs, brass chromium plated over head shower roses125 mm size with or without swivel joint, including fixing to steel pipe or union all as specified and directed(Make : CERA, Cat No: F7040103 (for arm) & F7020305 (for shower) / PARRYWARE, Cat No: T9802A1 (for arm) & T9986A1 (for shower)/ESS ESS, Cat No: OH-104A / HINDWARE, cat No: F160051) orequivalent make specified in tender. |
| 53 | S&F in repair Aluminium body ( extruded section ) door closer hydraulically regulated, designation No 3 , universal type suitable for door shutters of 851 to 1000 mmm in width and weight between 61 to 80 kgas directed by the Engr-in-Charge. |
| 54 | S&F in repairs, Tubular towel rail (premium quality), 20mm dia,600 mm long between flanges including brass chromium plated, complete all as specified and directed.(MAKE : JAQUAR, Cat No : ACN-111SM / PARRYWARE, Cat No : T6401A1 / ESS ESS, Cat No: AC-101 / CERA, Cat No: F5004103 / PRAYAG, Cat No: BA-20 /HINDWARE, Cat No: F840013 ) orequivalent make specified in tender. |
| 55 | S&F in repairs towel rack (premium quality) with lower hangar with hook incl taking down existing rack complete all as specified and directed. (Make : JAQUAR, Cat No: AHS-1581H / ESS ESS, Cat No: AC-308 / PARRYWARE, Cat No: T6008A1 / CERA, Cat No: F5003101 / PRAYAG, Cat No: BA-12) orequivalent make specified in tender. |
| 56 | S&F in repair vitreous china floor mounted coupled closet (Pedestal pattern) coloured including low level vitreous china valveless symphonic action type flushing cistern with inlet ball valve float,push button, flush pipe incl bracket, P/S trap, PVC white colour seat cover and connecting fittingsincluding taking down existing water closet complete all as specified and directed.(Make : PARRYWARE, Model : Cascade NXT / CERA, Model : CLAIR / HINDWARE, Model: CONSTELLATION orequivalent make specified in tender. |
| 57 | S&F in repair 6mm thick bevelled edge mirror of size as required fixed on 6mm thick acrylic PVC sheet complete all as directed by the Engr-in-Charge . |
| 58 | S&F in repair corner glass shelf 200 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102) orequivalent make specified in tender. |
| 59 | S&F in repair glass shelf 450/600 mm with brass brackets, as in repair complete all as specified and directed. (Make: PRAYAG, Cat No: BEA-44 / JAQUAR, Cat No: ACN-1173 / PARRYWARE, Cat No: T6010A1 / CERA, Cat No: F5005102) orequivalent make specified in tender. |
| 60 | S&F in repair CP bottle trap with internal portion 32mm size with 190mm long wall connection pipe complete all as specified and directed(Make: JAQUAR, Cat No: ALD-769L250x190 / ESS ESS, Cat No: C-231C / HINDWARE, Cat No: F850003 / CERA, Cat No: F8060302/ PRAYAG, Cat No: BEA-26) orequivalent make specified in tender. |
| 61 | Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 450 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed.(MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 orequivalent make specified in tender. |
| 62 | Supply and fix in repairs Low density polyethylene pipe connection, comprising of 15 mm dia 600 mm long having PTMT union at each end of connection to each of pillar tap/cistern/stop cock/urinal etc. at one end, stop cock at other end complete all as specified and directed.(MAKE : PRAYAG, Cat No. 323 / POLYTUF, Cat No. 4003 orequivalent make specified in tender. |
| 63 | S&F in repair White PVC Flushing Cistern 10 Litre capacity, Low Level Valve Less, Syphonic Action type with Inlet, Ball Valve, Float, flush pipe and Handleincluding Cutting and pinning in Ends, making good disturbed Surfaces in Cement Mortar 1:3 and fixed including taking down/out unserviceable Flushing Cistern and connected items complete all as specified and directed.(MAKE : PARRYWARE, Model : Slim line Economy / HINDWARE, Model : Sleek Plus / CERA, Model : Corona / PRAYAG, Model: SMART orequivalent make specified in tender. |
| 64 | S&F in repairs Chromium Plated 25mm dia brass chromium plated curtain rod withfixing brackets, stops, rollers etcasdirected by Engr-in-Charge. |
| 65 | S&F in repairs fancy type metal finish curtain bracket fixed to walls complete all as specified and directed by Engr-in-Charge. |
| 66 | Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets all as specified |
| 67 | M&L False ceiling with \"E\" board \"Classic\" , reinforced, designer series, board with HPSC of size 600 mm x 600 mm x 4 mm thick fixed on aluminium powder coated snap grid to support the boards/files with aluminium anodised main \"T\" section 36mm x 25mm x 1.40mm cross tee 23.50mm x 23.50mm x 1.40mm thick and aluminium angle 25mm x 25mm x 1.40mm as on edges/sides including hanging arrangements with 1.6mm dia GI wire and anodised adjuster and applying two coats of oil bound distemper over a coat of alkali resistant primer on exposed surfaces complete as in reall as specified and as directed |
| 68 | S & F 10 to 12 mm thick gypsum board false ceiling including 0.55 mm thick GI perimeter channel, GI channel tray frame work having one flange of 20mm and another flange of 30mmwith web of 27mm, fixed to surrounding wall using nylon sleeves and screws @ 450mm centre to centre / GI intermediate channel of size 45mm x 0.90mm thick with two flange of 15mm each suspended from the soffit of roof slab/ truss @1220mm c/c with MS angle of suitable size fixed to soffit of ceiling with GI cleat and expansion fasteners with and including ceiling section ( not exc 1.2 metre length ) of 0.55 mm thickness having kurled web of 50 mm and flange of 25 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel @ 457 mm centre to centre with necessary nuts and bolts and gypsum board screwed to ceiling section with stainless steel screws @ 230mm c/c including applying two coats of Oil bounf distemper over a coat of primer to exposed surfaces complete all as specified and directed. |
| 69 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area not exceeding 1.5 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 70 | Taking down chowkats or frames with shutters (w/o taking off shutters from the frames) area exceeding 1.5 sqm and not exceeding 4 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 71 | Taking down shutters of any description area not exceeding 1.00 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 72 | Taking down shutters of any description area exceeding 1.00 sqm and not exceeding 2.00 sqm each and removing from the site complete all as directed by Engineer-in-charge. |
| 73 | Supply and fixing 2nd class hard woodplain solid straight chowkats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified and as directed by Engineer-in-charge. |
| 74 | Cutting holes in to brick wall for inserting bold fast & making good dismantled portion in cm (1:3) or PCC (1:2:4) type B1, exe half brick but not exe 1 brickcomplete all as directed by Engineer-in-charge. |
| 75 | S & F mild steel work holdfast, cleat etc. for door frame/ wooden batten etc. quality conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 76 | supply & fixing 30 mm thick 2nd class harrd wood Skelton shutters open rebated and prepare to receive glass, gauge etc, edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, gauge etc, size of members of shutters as specified in SSR Part-I, Section 8.24(b) and as directed by Engineer-in-charge. |
| 77 | S& F 30mm thick flush shutters, solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed by Engineer-in-charge. |
| 78 | S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed. |
| 79 | S&F, Powder coated aluminium Three Track sliding windowwith shutter styles 40mm x20 mm sheet thickness 1.5mm Two shutter of glass and one shutter of wire mesh consisting ofStainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, frame (chowkat) of window shall 100mm x 44mm x 1.5mm thick section with or without rebate 5 mm thick tinted glass fixed with aluminium beads locking arrangement with each shutter all as directed by the Engineer-in-Charge.Note: 1) Size of window shall be as per site requirement. 2) Glass and wire cloth shall be inclusive in this Rate. |
| 80 | S & F powder coating of any colour (Thickness or powder coating not less than 50 micron). Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete all as specified Note: 1) Size of window shall be as per site requirement. 2) Glass and ACP Boars shall be inclusive in this Rate. |
| 81 | Supply and fixing 4.8 mm thick sheet glass frosted on one side, area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed by the Engineer-in-Charge |
| 82 | Supply and fixing 4.8 mm thick sheet Plain glass , area in squares exc 0.5 sqm in each pane and glazing with rubber gasket fixed to aluminium frame work / snap beading complete all as specified and as directed by the Engineer-in-Charge |
| 83 | Taking down old broken glass (any thickness, size, quality or description) from wooden frames, steel window or stone concrete or brick surrounds glazed with putty or fixed with beads complete all as specified and directed by Engr-in-Charge. |
| 84 | S & F5.0 mm thick Toughned glass good quality as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed. |
| 85 | S & F10.0 mm thick Toughned glass good quality as in hinged doors, partitions automatic doors and similar work including cutting to shape, drilling holes as required complete all as specified and directed. |
| 86 | S & F Factory Made Solid PVC Door Frame of size 50 x 47 mm made out of 5.0 mm thick plain colour PVC Sheet reinforced with Mild Steel Square Tube, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repaircomplete all as specified and as directed. |
| 87 | S & F Factory Made Solid Panel PVC Door Shutter 30mm thick, consisting of frame made out of Mild Steel Tube of 19 Gauge thickness and size of 19mm x 19mm for Stiles and 15mm x 15mm for Top & Bottom Rails. Mild Steel Frame shall have a coat of Steel Primer of Approved Make and Manufacturer. Mild Steel Frame shall be covered with 5.0mm thick heat moulded PVC \"C\" Channel of size 30 x 50mm forming Stiles and 5.0mm thick, 75mm wide PVC Sheets For Top Rail, Lock Rail & Bottom Rail on either side, and 10mm (5.0mm x 2) thick, 20mm wide Cross PVC Sheet as gap insert for Top Rail, Lock Rail & Bottom Rail. Panelling of 5.0mm thick PVC Sheet Beading on either side and joined together with Solvent Cement Adhesive, etc. An additional 5.0mm thick PVC Strip of 20mm width is to be stuck on the interior side of the \"C\" Channel using PVC Solvent Adhesive, fixing in opening as per Specifications and Drawings shown in MES Schedule Part-II, as in repair complete all as specified and as directed. |
| 88 | S&F instainless steel wire cloth of 0.36mmnominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed by Engr-in-Charge. |
| 89 | M&Lforpreparation ofnew untreated wooden surfaces of any description, not otherwise describedover 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engineer -in-Charge. |
| 90 | Supply & fixing 100mm stainless steel butt hinges(medium weight) cold rolled complete all as directed by Engineer-in-charge. |
| 91 | Supply & fixing 150 mm size aluminium anodised barrel tower bolts of extruded section (ISI marked) make: Alans/Classic all as directed by Engineer-in-charge. |
| 92 | S&F 150mm long aluminium anodised handles (fabricated type) ISI marked (Make : Alans/Classic) complete all as specified and directed by Engr-in-Charge. |
| 93 | S&F 300mm long aluminium anodised sliding bolt with hasp, staple (bolt type) and fixing clips or sheets cast of extruded section and fixing bolts and sliding bolts of extruded section ISI marked complete all as specified and directed by Engr-in-Charge. |
| 94 | S & F in repairs 450 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or dwawn brass bolt. |
| 95 | S & F in repairs 600 mm long brass steel skeleton tower bolts with cast brass plate and staples and rolled or dwawn brass bolt. |
| 96 | S & F in repairs 300 mm long brass , sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fiing bolt with rolled or drawn brass bolts. |
| 97 | S&F in repair 4.8mm thick plain sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed by Engr-in-Charge. |
| 98 | S&F in repairs stainless steel wire cloth of 0.36mmnominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples as directed by Engr-in-Charge. |
| 99 | S&F in repair 19mm thick commercial faced plywood grade BWR type B-B fixed with screws to timber frame work as in pelmet boxes, cup board etc all as directed by the Engr-in-Charge.(Make : Greenply/Kitply/Alishan) or equivalent as approved by Accepting Officer |
| 100 | M & L in repairs 0.9mm thick decorative laminate type-1 (sunmica) of surface finish colour and pattern as approved fixed with approved adhesive as per manufacturer\"s instruction complete all as specified and directed by Engr-in-Charge. |
| 101 | Dismantling structural steel work of any description including doors, gates, railing etc but excluding framed trusses all as directed by the Engineer-in-Charge. |
| 102 | M&L mild steel rolled sections as in main and cross beams, angle, hip and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors etc conforming to grade Fe-410- W (Gde- E- 250) quality- A made to required shape and size, welded at joints complete all as specified and directed |
| 103 | S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St-240 including necessary form work complete all as specified and directed. |
| 104 | S&F rolled mild steel in roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of Fe-410-W(Gde-E-250) quality-A complete all as specified and directed. |
| 105 | S & F mild steel in framed work such as grills, gratings, etc. with ends of bars shouldered and /or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 all as specified and directed by Engineer-in-Charge. |
| 106 | Dismantling of plain or corrugated steel sheeting any gauge or any thickness in roof covering including stacking serviceable materials of re-use and removing unserviceable materials. |
| 107 | S&F in repairs 2mm thick fibre glass reinforced translucent corrugated sheeting with two corrugation side lap as in roof, wall fixed with L-type or J- type or crancked hook bolts in lieu screw complete all as directed by the Engr-in-Charge |
| 108 | S & F pre-paintedGalvalume aluminium zinc coating GI based corrugated steel 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 109 | S & Fpre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, ridges , valley gutter etcfixed with self tapping screws as specified. |
| 110 | S&F0.56 mm thick plain aluminium sheeting alloy 31000 H4 as in ridges, hips, valley gutter, drip and straight flashingetc complete all as specified and as directed. |
| 111 | Supply and Fixing PVC solid wall lining consisting of 5 mm thick plain colour PVC sheet used inclusive of solvent cementand fixing at site on PVC frame as per manufacturer’s specification and instruction) directed by the Engineer-in-Charge. |
| 112 | Supply and Fixing PVC fillets of width 35 mm, made of 5 mm thick PVC sheet, for wall paneling inclusive of fixing as in grid / frame on wall at a distance .6m horizontal & vertical for wall lining/paneling as per specification of manufacturer and as directed by the Engineer-in-Charge. |
| 113 | S&F Mono block water pressure pump set of capacity 0.50 HP single phase , discharge range 36-60 Lpm , working in voltage range 220-240 V with operating pressure range 1.4 -2.4 (Bar) complete including with closed dischargevalve and connected fittings complete all as specified and as directed . Make: KILOSKAR- ETERNA, Model SJPBS 42420- HL or equivalent model as approved by the Accepting officer |
| 114 | S&F of 15mm dia bore steel water GI tubes medium grade with all fittings and fixed concealed to walls, ceilings or laid in floors complete with and including taking up or down 15mm bore steel water tubing and connections complete all as specified and directed |
| 115 | S&F of 20mm dia bore steel water GI tubes medium grade with all fittings and fixed concealed to walls, ceilings or laid in floors complete with and including taking up or down 20mm bore steel water tubing and connections complete all as specified and directed |
| 116 | S&F 1000 Litre Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed |
| 117 | S&F 2000 Litre Capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed |
| 118 | Dismantling of 100mm bore cast iron (sand cast) soil, wasteor reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if requiredall as specified and as directed by the Engineer-in-Charge. |
| 119 | Dismantling of 150 mm bore cast iron (sand cast) soil, wasteor reinforced concrete drain pipes, jointed in cement mortar and taking out of trenches, if requiredall as specified and as directed by the Engineer-in-Charge. |
| 120 | S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints laid in trenches or in floor complete all as specified and directed (Note : Earthwork to be measured and paid separately). |
| 121 | S&F 150 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on floor or trenches complete all as specified and directed (Note : Earthwork to be measured and paid separately). |
| 122 | S&F 100 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed |
| 123 | S&F 150 mm dia Cast soil waste and vent pipes in any length with or without ears with cement joints fixed on wall complete all as specified and directed |
| 124 | S&F in repair 100mm CIbends (any radius),diminishing pieces or tapers(larger bore measured) any radius with oval access doorscomplete all as specified and directed |
| 125 | S&F in repair 150mm CIbends any radius complete all as specified and directed |
| 126 | S & F in repair PVC (SWR) pipe 75 mm bore single socketed in any length with rubber ring, fixed on wall complete all as specified and directed. |
| 127 | S & F in repair PVC (SWR) pipe 110 mm bore single socketed in any length with rubber ring, fixed on wall complete all as specified and directed. |
| 128 | S & F in repair PVC bend 110 mm bore complete all as specified and directed. |
| 129 | M & L for Disconnecting existing water tanks capacity exc 250 litre n exc 500 litre , setting aside (or lowering if required) for cleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed. |
| 130 | M & L for Disconnecting existing water tanks capacity exc 500 litre n exc 1000 litre , setting aside (or lowering if required) for cleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed. |
| 131 | M & L for Disconnecting existing water tanks capacity exc 1000 litre n exc2000 litre , setting aside (or lowering if required) forcleaning, repairs, leaning, etc. and hoisting using cleaning agents (chemical compound) if required all as specified and directed. |
| 132 | Removal of existing water proof treatment of any description including cement plaster carefully from the surfaces cleaning and scrubbing down with water complete all as specified and as directed. |
| 133 | M & L for Providing, cement concrete, Type B1, 1:2:4 ( 20mm aggregate) in roof kerbs or mud stops, padding, rounded or chamfered on edges on existing roof( with proper slope) including preparing of roof slab complete all as directed by Engineer - in - charge. |
| 134 | M&L rendering 10 mm thick screed bed on concrete surface in CM (1:4) & even and smooth mixed with water proofing compound@ 250ml/Bags finished fair and even. ( Note -W.P.C. shall be measured and paid separately.) |
| 135 | M & L for water proofing treatment on existing cleaned RCC roof with following specification and manufacturer Instruction complete all as specified as directed.(a) Applying bitumen primer confirming to IS-3384-1986 over the cleaned plaster surfaces as per IS-3067-1966.(b) Applying a layer of APP based polymeric membrane 3.0mm thick (minimum) weighing 3.0 Kilogram per sqm (reinforced with polyster non oven fabric weighing not less than 160 Gmss per sqm by torch application. The over laps shall be minimum 100mm on the transverse direction and 75 mm on longitudinal direction.(c) applying one coat of aluminium paint @ 0.10 Litre per Sqm Over APP based Polymeric membrane. |
| 136 | Supply only integral water proofing compound all as specified and as directed. |
| 137 | M & L for Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed. |
| 138 | E/M PortionTaking down copper/ aluminium point wiring (light, fan, buzzer, socketor power) complete including fixture and fittings such as switches, ceiling roses, pendants , regulators, sockets etc excluding light fitting for taking credit removing from site and making good disturbed surface of walls, floors etc complete all as specified and as directed. |
| 139 | M & L for point wiring with FRLSH PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC casing & capping / PVC contut terminated in PVC block 50 mm deep (sunken) for fixing of switches, sockets, fan regulators etc (PVC box of required size will be measured and paid under relevant item) for the following: - |
| 140 | One light point or one fan pointor bell point controlled by one switch or bell push |
| 141 | One 3/5 pin socket outlet, 5 Amp independent |
| 142 | One 3/5 pin socket outlet, 5 Amp on the same board with other switches |
| 143 | M & L for point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 2.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm size through and including PVC casing & capping terminated in and including PVC block 50 mm deep (sunken) for fixing of switches/ sockets for one 3 pin socket outlet, 15 Amps, independent . |
| 144 | M & L for concealed point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 1.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 1.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches, sockets, fan regulators etc for the following [Note: - Modular switch boards shall be measured and paid separately]: - |
| 145 | One light point or one fan point controlled by one switch |
| 146 | One 3/5 pin socket outlet, 5 Amp independent |
| 147 | One 3/5 pin socket outlet, 5 Amp on the same board with other switches |
| 148 | M & L for concealed point wiring with FRLSH grade PVC insulated unsheathed multistranded copper conductor cables of 2.5 sqmm size alongwith one earth continuity conductor with PVC insulated unsheathed multistranded copper conductor cable of 2.5 sqmm size through and including PVC conduit terminated in modular switch boards for fixing of switches/ sockets for one 3 pin socket outlet, 15 Amps, independent [Note: - Modular switch boardsshall be measured and paid separately] |
| 149 | S & F Modular Switch 1 way 6 A, 1 module complete all as specified and as directed. |
| 150 | S & F Modular Switch 1 way 16 A, 1 module complete all as specified and as directed. |
| 151 | S & F Modular Socket 6 A, 2/3 pin combined 2 module complete all as specified and as directed. |
| 152 | S & F Modular Socket outlet 6 A/ 16 A, 2/3 pin combined 2 module complete all as specified and as directed. |
| 153 | S & F Modular Blank plate, 1 module complete all as specified and as directed. |
| 154 | S & F Modular type White cover plate with frame 1 module complete all as specified and as directed. |
| 155 | S & F Modular type White cover plate with frame 2 module complete all as specified and as directed. |
| 156 | S & F Modular type White cover plate with frame 3 module complete all as specified and as directed. |
| 157 | S & F Modular type White cover plate with frame 4 module complete all as specified and as directed. |
| 158 | S & F Modular type White cover plate with frame 6 module complete all as specified and as directed. |
| 159 | S & F Modular type White cover plate with frame 8 module complete all as specified and as directed. |
| 160 | S & F Modular type White cover plate with frame 12 module complete all as specified and as directed. |
| 161 | S & F Modular type Metal Flush box 1/2 module complete all as specified and as directed. |
| 162 | S & F Modular type Metal Flush box 3 module complete all as specified and as directed. |
| 163 | S & F Modular type Metal Flush box 4 module complete all as specified and as directed. |
| 164 | S & F Modular type Metal Flush box 6 module complete all as specified and as directed. |
| 165 | S & F Modular type Metal Flush box 8 module complete all as specified and as directed. |
| 166 | S & F Modular type Metal Flush box 12 module complete all as specified and as directed. |
| 167 | S & F Bell , AC, 230 Volts, single pole complete all as specified and as directed. |
| 168 | S & F Musical Call Bell as per sample approved and directed by Engineer-in-Charge. |
| 169 | S & F stepped type electronic fan regulator flush type complete all as specified and as directed. |
| 170 | S & F Ceiling rose, 3 terminal PVC insulated body complete all as specified and as directed. |
| 171 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 172 | S & F in repair LED tube light fitting 10 watt, mirror type /mounted on wall / ceiling connected with insulated unsheathed flexible copper wire of suitable size (length not exceeding 0.5 m) from ceiling rose complete all as specified and directed. |
| 173 | S & F in repair Recess mounting 1X1 LED Luminaire ceiling light fitting 15 W as in repair,with suitable driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make: Havells PLUTO1X1PLR15WLED857S or equivalent make specified in tender. |
| 174 | S & Fin repairLED Ceiling light fitting 35/36 Wrecess type as in repair, minimum colour temperature 6500K, with suitable driver complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Make: Crompton LCTLSN-36-CDL or equivalent make specified in tender. |
| 175 | Taking down of old Submain wiring upto 10 sqmm any type including batten/ conduit/ casing at any indicated situationcomplete all as specified and directed. |
| 176 | M & L for sub main wiring with 4 run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm alongwith one run of FRLSH PVC insulated & unsheathed multistranded copper conductor of nominal cross sectional area 10.0 sqmm as earth continuity conductor drawn through and including PVC casing-capping of suitable size, surface type all as directed. |
| 177 | All as per Srl. Item No. 176 above but with 2 run of 6.0 Sqmm cable and 6.0 Sqmm as earth continuity conductor. |
| 178 | All as per Srl. Item No. 176above but with 2 run of 4.0 Sqmm cable and 4.0 Sqmm as earth continuity conductor. |
| 179 | Cutting Chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and directed. |
| 180 | Taking down of Old MCB DB any type any size including MCBs and disconnecting the serviceable MCBs and keeping in safe custody for reuse at site complete all as specified and directed |
| 181 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 4 way with 200 amps rated bus bar complete all as specified and directed. |
| 182 | S & F Sheet metal enclosure for MCB DB double door Triple pole & Neutral 4 way with 200 amps rated bus bar complete all as specified and directed. |
| 183 | S & F Sheet metal enclosure for MCB DB double door single pole & Neutral 8 way with 200 amps rated bus bar complete all as specified and directed. |
| 184 | Supply and fixing PVC casing/capping of size 25 mm with all accessories all as directed by Engr-in- charge . |
| 185 | Supply and fixing PVC casing/capping of size 20 mm with all accessories all as directed by Engr-in- charge . |
| 186 | S&F GI tubing medium grade of size 15 mm dia incl painting and making hole for extension of fan hook in high roof ceiling complete all as specified. |
| 187 | Supply only clamp with buckle for hanging ceiling fan including nut and bolts complete set all as specified and directed. |
| 188 | Supply only MCB Four pole, 415 volts, 63 Amps, breaking capacity 10KA complete all as specified and directed.Make: Cat No 408702, of Legrand or equivalent make specified in tender. |
| 189 | Supply only MCB \"C\" series single pole and Neural 32 Amps, breaking capacity 10KA complete all as specified and directed. Make:Cat No 408587-95, make: of Legrand or equivalent make specified in tender. |
| 190 | Supply only MCB \"C\" series single pole 6 to 32 Amps, breaking capacity 10KA,complete all as specified and directed. Make:Cat No 408587-95, of Legrand or equivalent make specified in tender. |
| 191 | Supply only AC short circuit protection motor starter 25 Amps capacity AC 230 Volt complete all as specified and directed. |
| 192 | Supply only lamp pendant / batten holder, complete all as specified and directed by Engr-in-Charge. |
| 193 | S & F LED decorative Wall lightsfitting 4 W x 2, complete with all accessories internally pre-wired and including connecting up with twin core twisted flexible copper conductor cableE-14 LED 4w X2 complete all as specified and directed. Make: Jaquar JES-WHT-WL00002TAE14or equivalent make specified in tender. |
| 194 | Note: Schedule of credit (SCHEDULE OF CREDIT)amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
