|
| 1 | Demolition of brick work or stone / boulder masonary,built in cement mortar incl all quoins , pillars etc complete all as specified and directed. |
| 2 | M&L for brick work with old size sub class B bricks straight or curved on plan exc 6m mean radius built in CM 1:6 complete all as specified and directed. |
| 3 | M&L for brick work with old size sub class B bricks straight or curved on plan to anyradius in half brick thick wall built in CM 1:4 complete all as specified and directed. |
| 4 | Dismantling of asbestos cement (corrugated, semi corrugated etc) sheet inroof coverings at any height of bldg.Complete all as specified and as directed |
| 5 | Dismantling ofwrought iron or mild steel work of any description not otherwise provided for .Complete all as specified and as directed |
| 6 | S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates and cooler stand and similar work confirming to Fe 410W(Gde E-250 quality A) complete all as specified |
| 7 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick,Trapezoidal roofing profile with 190 mm Pitch &29 mm depth of profileof any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. |
| 8 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick,Trapezoidal roofing profile with 190 mm Pitch &29 mm depth of profileof any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.(For sun shed) |
| 9 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5 mm thick of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed. |
| 10 | M&L Painting to new steel and iron surface of any description over 10cm in width or girth not otherwise described with two coats of synthetic enamel paint over coat of red oxide primer complete all as specified and directed |
| 11 | Dismantling wall and celling board (fibre, pulp, insulation etc) any thickness including cover fillets as directed. |
| 12 | S&Ffalse ceiling with Everest Fibre Cement Designer tile Ivory painted (High Pressure Steam Cured) of4mm thickness (as per IS:14862) of size 595x595 mm and any one of the design (oceanic, lake & hill, cascade or electra) in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections (galvanized @ 120 gms, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and 15x32 mm made from 0.30 mm thick sheet, spaced at 1200 mm c/c and cross \"T\" of size 15x32 mm made of 0.30 mm sheet, 1200mm long spaced between main \"T\" at 600 mm c/c to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size15x32 mm made of 0.30 mm thick sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 15x20 mm made of 0.30 mm thick sheet and laying false ceiling tiles in the grid including , required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI soffit cleats fixed to existing RCC lintel with dash fasteners, GI adjustable rods of 3mm dia with galvanised Butterfly level clips, spaced at 1200 mm c/c along main T, bottom exposed width of 15mm of all T -sections shall be centra black pre-painted with polyester paint, and having a load bearing capacity of 12 kg/sqm, all complete at all heights as per direction of Engineer-in-charge. |
| 13 | Dismantling floor, hearth or wall tilling including cement mortar bedding, and rubbish offpremises etccomplete all as specified and directed. |
| 14 | Material & Labour for Non- skid coloured HD Digital Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.38 sqm but not exceeding 0.72 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed incement mortar 1:6 complete all as specified and directed. |
| 15 | All as per item above but in dedo/skirting vertical surfaces over and including 10mm thick plaster in cement mortat 1:4. Complete all as specified and directed |
| 16 | Taking down chowkats or frames areanot exceeding 1.50 Sqm(w/o taking off shutters from frames) and removing from site, including cutting holes for taking out existing hold fasts and making good in cement mortar (1:3) or PCC 1:2:4 type B1, complete all as specified and as directed.(Note – The quoted rate shall be deemed toinclude for fixing of hold fast in the same opening irrespective of position of hold fasts and no separate item for making good of hold fasts shall be paid). |
| 17 | M&L for 14-16 mm thick Black granite stone as in cooking platforms, slabs for oval type WHB,sinks/cills etc & the likes completelaid over 15 mm thick cement sand screed in CM 1:4 incl mirror polishing complete & providing necessary holes for gas pipecomplete all as specified and directed. |
| 18 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 19 | Supply and fixing for mild steel framed work as in door chowkats/gate of angle or angle iron work as in fixing of cooler stand by drilling/cutting the stone masonry wall and fixing up to 1st floor walls, other section of grade Fe-290-Gde E-165 with gusset plate rails, braces etc welded/drilled to fixing of steel sheeting or other covering doors etc. to be prepared for sliding or hanging with and including either hooks and hinges or steel hanging door fittings (exclusive steel sheeting or other covering, running rails & guides), complete all as specified and as directed by the Engr-in-Charge. |
| 20 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid Decorativetypeflush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with ecessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge.(Note: stainless steel butt hinges and necessary S S screws shall be paid separately) ® |
| 21 | Supplyand fixing, made 100% Solid WPC (Wood Polymer Composite) Door Frames of cross section 45 mm x 70 mm(moulded) having single rebated made from Wood Polymer Composite (Single Extruded Process) material comprising of virgin PVC polymer of K-Value 57-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ruce husk/wheat husk)and non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treated star headed screws having minimum frame density of 780 Kg/cbm & manufactured by \"Rajshri/Echon or Eq\" an ISO 9001-2015 certified company, having good screw holding capacity (Screw withdrawal strength of (Min, 990N) Minimum compressive strength of 58 N/mm2, modulus of elasticity 900N/mm2 and resistance to spread of flame of class A category with property of being termite/borer prof, water/moisture proof & fire retardant & fixed in position with and including SS Dsh Fasteners/Hold Fast of required dia and length, all as per specifications drawings as directed,. Material test certificate and authentication should be compoulsory provided by the manufacturing company. |
| 22 | Supply & fixed 150 mm long aluminium anbodised barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 23 | Supply & fixed150 mm long Extruded aluminiumalloy handles, fabricatedtype anodised complete all as specified. |
| 24 | S&F 100 mm long stainless steel butt hinges with galvanised MS hinge pin etc. |
| 25 | S&F in repair Stainless steel 20mm dia curtain rod including fixing brackets complete all as specified and directed. |
| 26 | S&F Stainless steel knobs with bracket fixing at end of pelmet rod complete al as spd & directed. |
| 27 | Taking down cement plaster from brick walls/stone masonry walls, concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc complete all as specified and as directed. |
| 28 | Material andlabour for 15mm thick rendering in cement mortar (1:6) onbrick/stone masonry or concrete surfaces (internal walls) of any description, finished the surface even and smooth without using extra cement complete all as specified. |
| 29 | Material andLabour for 15mm thick rendering on fair faces of brick work/stone masonry, concrete surfaces (external walls) or stone walls upto 7.5 mtr ht of bldgs in cement mortar 1:4 mixed with liquid water proofing compound using as per manufacturer’s instructions,finished even and fair, complete all as specified. Note : (i) WPC shall be measured and paid separately. (ii) Rendering upto 9 mtr ht shallbe included in the quoted rate). |
| 30 | Dubbing out average 15mm thick in CM 1:4 on irregular faces of walls or concrete chajjas (at any hight of building) etc including necessary scaffolding complete all as specified and directed by Engineer-in-Charge. |
| 31 | Supply only liquid water proofing compound, ISI marked complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper (acrylic) white or tinted over a coat of 1 mm thick wall care putty, complete all as specified and directed. |
| 33 | Material & Labour for preparation of new plastered surfaces of wall and applying two coats of weather coat over a coat of 1 mm thick wall care putty for neat and smooth finishing complete all as specified. |
| 34 | Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign mtrls making good minor cracks etc in cement mortar 1:3 on the surface with uniform thickness making surface absolutely smooth,applying 1mm thick water proof wall care putty & applying two coats of Interior plastic emulsion paint white or tinted over priming the surface with al-kali resistance priming paint complete all as specified and directed. Make: \"Royale\" of Asian Paints and equivalent product of Berger Paints /Nerolac paints as approved by AGE(I) complete all as specifeid . |
| 35 | Taking down existing wall finishes any type by vigorously wire brushing, brooming dusting & finally washing with water to clear the surface absolutely free from any kind of existing finishes & foreign mtrls making good minor cracks etc in cement mortar 1:3 on the surface with uniform thickness making surface absolutely smooth,applying 1mm thick water proof wall care putty & applying two coats of exterior emulsion paint white or tinted over priming the surface with (100% Acrylic)Base coat of Apex ultima protek duralife and top coat of Apex Ultima protek, Make : Asian Paints) over a coat of alkali resistent primer through authorized applicator only complete all as specified and directed. |
| 36 | M&L for preparation of old painted steel surface of any description, over 10cm in width or girth not other wise described and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 37 | Demolition of reinforced cement concrete of any description and in any position not otherwise specially provided for including cutting of steel reinforcementas required to facilitate demolition, complete all as specified. |
| 38 | Material and labour for providing reinforced cement concrete 1:2 :4 type B1 using (20mm graded stone aggregate ) as in cooking platform slab supported on wall, beam, cantilevers and kitchen cooking platform including necessary formwork complete all as specified. |
| 39 | Material andlabour mild steel TMT bars, 8 mm dia , cut to length, bent to shape required including cranking, binding spirally for hooping or column, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm diaor securing with clips, complete all as specified and directed. |
| 40 | M&L for form work, fair finished to soffits of suspended slabs such as roof slabs, floor slabs, landing and similar works flat n exc 200mm thick (Horizontal or slopping) etc complete all as specified and directed. |
| 41 | S&F in repair Oval shape WHB size 605 x 430mmx200mm ,including CP waste coupling 32mm,waste pipe complete all as specified and directed. |
| 42 | S&F in repair One piece ceramic floor mountedwestern water closetwhite with soft close seat cover including flush tank, trap and all fittings complete all as specified and as directed, Note:-The size, colour, design and Make shall be Approved byEng-in-Charge. Make:- Cera, Parryware, Hindware,Jaqur.Prayag |
| 43 | S&F in repair 15mm bore concealed stop valve type chromium plated cast copper alloy screwed down high pressure screwed both ends for iron pipe or for unionall as specified and directed by Engr-in-charge. |
| 44 | S&F in repairs Chromium plated bib taps,with capstan heads, screwed down for iron pipe or for brass ferrule& fixed for 15 mm bore pipe complete all as specified & directed. |
| 45 | S&F in repairs chromium plated faucet for pedestal type WC with 1.00 mtr tube and hook asapproved by Engr-in Charge. Make:- parryware, prayag, Jaquar |
| 46 | S & F in repair 15mm bore light angular stop valves with wall flange, Half Turn / Quarter turn, fancy type chromium plated screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and directed. Make :- Cera, Parryware ,Hindware ,Prayag, Jaquar |
| 47 | S&F Half Turn / Quarter turn, 15mm dia CPcentral hole basin mixer without pop up waste system with 450 mm flexible hose for mixing ofhot and cold water screwed for iron pipe and fixed complete all as specified and directed. Make : Cera, Parryware or Hindware , Prayag or Jaquar |
| 48 | S&F in repair brass chromium plated tubular towel rail 20mm dia \"D\" type 60cm long between flanges all as specified and directed by Engr-in-charge. |
| 49 | S&F in repair rotational molded polyethylene water storage tanks (cylindrical vertical with closed top) capacity 500 Ltrhoisted and fixed in position after dismantling (water tank of cap exc 500 ltr and n.exc 1000 ltr) and removing to store and all as specified and directed by Engr-in-charge. |
| 50 | S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe flange ends type fixed of 20mm dia all as spd and directed. |
| 51 | S&F in repair PTMT ball valves high pressure with epoxy coated aluminium rod & high density plastic ball screwed for 20mm bore pipesall as specified and directed by Engr-in-charge. |
| 52 | S&F in repair bevelled edge looking mirror 5.5mm thick of anysize mounted on mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washerscomplete all as spfd anddirected by Engr-in-charge. |
| 53 | Taking up or down steel tubing and connections of 15mm bore including cleaning for refixing or removal to store provision for branch connection by inserting tee union elbow etc. complete all as required at site. |
| 54 | All as item above but 20mm bore, complete all as specified. |
| 55 | Supplying and laying of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings 16mm dia bore on walls/ceiling or laying in floors or fixing as in concealed to walls or in floors etc, and making good the surfaces matching to exsiting surfaces of walls/ floor to the entire satisfaction of Engineer-in-charge. |
| 56 | Material & Labour Steel Tubes 20mm bore, \"medium grade\", galvanised, with all fitting; laid in trenches and fixed complete to brick/stone wall or laid in floor concealed, complete all as specified and as directed.. |
| 57 | Supply & fixedin repair glass shelf assembly consisting of made out of 5.5 mm thick glass shelf 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specified and directed. |
| 58 | S & F for CP brass Soap Dish Holder, complete all as specified and as directed. |
| 59 | Demolitionand breaking up 100mm dia drain pipes (Salt glazed ware, AC or Reinforced concrete ) set in cement mortar,complete all as specified and directed. |
| 60 | S&F75mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 61 | S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors |
| 62 | S&F110 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed on walls including GI stack clamp out of 30mm by 4mm flat iron and 12mm dia round stays, bolts and nuts and securing ends of stays |
| 63 | S&F 75 mm bore PVC (SWR) bends any radius |
| 64 | S&F 110 mm bore PVC (SWR) bends any radius |
| 65 | S&F 110 mm bore PVC (SWR) junction single (Single T) equal or unequal |
| 66 | S&F 100mm bore pipe PVC (SWR) vent cowls, complete all as specified. |
| 67 | Material andlabour in repairs 75mm dia PVC (SWR) floor trap plain with grating including jointing with solvent cement. Completeall as specified and directed. |
| 68 | Material andlabour in repairs PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement including jointing to waste pipe fixed in cement concrete type-B-1 (1:2:4) using 12.5mm brick aggregate all as specified and directed. |
| 69 | Taking down carefully copper/Aluminum point wiring (light/fan/socketor power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc., removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making gooddisturbed surfaces of wall, floors etc. complete all as directed. |
| 70 | Taking down carefully complete light fittings removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making gooddisturbed surfaces of wall, floors etc. complete all as directed. |
| 71 | Taking down Distribution Boards along with MCB\"s incl removing the same from site and making good to the disturbed surface complete.Note: All taken down MCBs should be deposited to MES store by the contractor without any extra charge. |
| 72 | Taking down existing sub main wiring of any type and description including removal of teak wood batten/pipe etc complete. |
| 73 | M/L for point wiring concealed type with 1.5sq mm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box incl 3mm thick ISI marked laminated sheet cover for fixing switches/socket/regulators etc for the following: Wire: Make -Mescab/Polycab/KEI/Havells/FinolexPVC conduit: Make -Polycab/Precision/Plaza/KalingaNote:- (i) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing capping and its accessories.(ii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated. |
| 74 | One light/fan/bell point controlled by one No piano type switch5 Amps single pole one way |
| 75 | One socket outlet 5/3 pin 6 AMPS controlled by one switch on the same board. |
| 76 | One socket outlet 5/3 pin 6 AMPS controlled by one switch onindependent board. |
| 77 | All as per item No 5 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor. |
| 78 | S&F Switch Piano Flush button single pole one way 5/6 Amp.MAKE:- Havells(Reo)/Anchor(Penta)/Gold Medal |
| 79 | S&F Switch Piano Flush button single pole one way 15/16 Amp.MAKE:- Havells(Reo)/Anchor(Penta)/Gold Medal |
| 80 | S&F socket outlet 2 in 1,5 pin & 2 pin, 5/6 Amp, 240 volt.MAKE:- Havells(Reo)/Anchor(Penta)/Gold Medal |
| 81 | S&F socket outlet 2 in 1 ,5 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt.MAKE:- Havells(Reo)/Anchor(Penta)/Gold Medal |
| 82 | S&F ceiling rose surfacebakelite 65mmx50mm 100watt three terminal.MAKE:- Havells(Reo)/Anchor(Penta)/Gold Medal |
| 83 | S&Fstep typeelectronicfan regulator flush type one way on the existing phenolic laminated sheet.MAKE:- Havells(Reo)/Anchor(Penta)/Gold Medal |
| 84 | S&F Lamp holder PVC/Polycarbonate insulated body with metal ring and back plate for batten fitting including with 9watt LED bulb.MAKE:- Havells(Reo)/Anchor(Penta)/Gold Medal |
| 85 | M&L for sub main concealed wiring with two single core PVC insulated of size 6 sqmm FRLS unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including non metallic rigid PVC conduit and conduit accessories of 25 mm external dia and conduit FRLS accessories of ISI marks medium grade including 6.0 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly.Wire: Make -Mescab/Polycab/KEI/Havells/FinolexPVC conduit: Make -Polycab/Precision/PlazaNote:-(i) One run of conduit two run of 6 sq mm copper conductor & one run of 6.0 sq mm copper conductor is measured as one unit.(ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories.(iii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated. |
| 86 | M&L for sub main concealed wiring with two single core PVC insulated of size 4.0 sqmm FRLS unsheathed copper conductor 1100 volt grade multistandard and incl drawn through and including non metallic rigid PVC conduit and conduit accessories of 20 mm external dia and conduit FRLS accessories of ISI marks medium grade including 4.0 sqmm FRLS copper wire for earth continuity wire and connected of common earth dolly.Wire: Make -Mescab/Polycab/KEI/Havells/FinolexPVC conduit: Make -Polycab/Precision/PlazaNote:-(i)One run of conduit two run of 4 sq mm copper conductor & one run of 4.0 sq mm copper conductor is measured as one unit.(ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories.(iii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated. |
| 87 | S&F in replacement single pole and neutral enclosure with a two pin and earth socket complete with one single pole MCB of 20 Amp 240 volt.Make:- Legrand/Hager/Schneider/IndoAsian/Siemens. |
| 88 | S&F sheet metal enclosure double door for MCB DB single pole and neutral 8 way with 200 Amps 240 volts double door (Metallic) type.Make:-Legrand/Hager/Schneider/IndoAsian/Siemens. |
| 89 | S&F sheet metal enclosure double door for MCB DB single pole and neutral 4 way with 200 Amps, 240 volts double door (Metallic) type.Make:-Legrand/Hager/Schneider/ndoAsian/Siemens. |
| 90 | S&F MCB SP 5 to 63 Amps 240 volts \"C\" series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB |
| 91 | S&F MCB SPN 40 to 63 Amps 240 volts \"C\" series, 10 KA, 50 Hz, confirming to IS/IEC-60898-1. Make:- As approved Make of DB |
| 92 | Supply and fixing LED 4\" batten light18/20 Watt230 Volt, complete connection with PVC insulated multi stranded copper flexiblewire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge.Make Havells/Surya/Crompton/Philips/Bajaj |
| 93 | Supply and fixing Badminton Court Led Light Colour White complete connection with PVC insulated multi stranded copper flexible wire twin core of suitable size from nearest source complete all as specified and as directed by Engineer-in-Charge.Make Havells/Surya/Crompton/Philips/Bajaj |
| 94 | Supply and fixing 36\" GI Industrial Exhaust Fan with 6 No SS Blade 7000 CFM, 415V, 3 Auto opening damper type shutter type shutter, Direct Driven Outer Box Size - 800 x 800 x 400mm, Inner Blade diameter - 36 inchesincluding Fan safety Unit with single Phase Preventer and OLR complete.Make : Havells/Surya/Crompton/Philips/Bajaj |
| 95 | M&L for cutting and making good to the disturbed surface for fixing of Industrial Exhaust Fan complete all as specified and as directed by Engineer-in-Charge. |
| 96 | S&F verticalsheet metal enclosure double door for MCCB DB Triple pole and neutral 4 way, (4+12) with 200 Amps rated bus bar 415 volts earth dolly IP-43, IK09, complete all as specified and directed by Engineer-in-Charge.Make:-Legrand/Hager/Schneider/IndoAsian/Siemens/HavellsNote :- MCBs are measured and paid separately under respective items. |
| 97 | S&F MCCB TPN 63 Amp, 440 volt \"C\" series, 16 KA, 50 Hz, confirming to IS/IEC-60898-1 complete all as specified and directed by Engineer-in-Charge.Make:- As approved Make of DB |
| 98 | M&L for wiring Circuit/ Submain wiring concealed type alongwith earth wire with the sizes of 4 x 2.5 Sq. mm + 1 x 2.50 Sq mm earth wire of FR PVC insulated copper conductor cable 1100 Volts grade in PVC conduit of 25 mm dia with its accessories pressed steel terminal box complete all as specified and as directed by Engr-in-Charge.Wire: Make -Mescab/Polycab/KEI/Havells/FinolexPVC conduit: Make -Polycab/Precision/PlazaNote:-(i) One run of conduit 4 x 2.5 sq mm copper conductor & one run of 2.5 sq mm copper conductor is measured as one unit.(ii) On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit and its accessories.(iii) Cutting of wall, floor, PCC work and white wash for making of good to disturbed surfaces shall be included in the rate quated. |
| 99 | S&F sheet metal enclosure double door(Metallic) type for MCB DB Triple pole and neutral 4 way, 415 volts complete all as specified and directed by Engineer-in-Charge.Make:-Legrand/Hager/Schneider/ndoAsian/Siemens. |
| 100 | Note :-Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.) |
