Tender For Special Repairs Of Bldg No P-18, P-2H, P-52 And P-91 At Various Units Under Ge Missamari, Missamari-Assam

TDR : 53072014

Tender Notice
BOQ

27 Days Left

Missamari , Assam

Tender Brief : Tender For Special Repairs Of Bldg No P-18, P-2H, P-52 And P-91 At Various Units Under Ge Missamari

Document Fees
₹ 1000 /-

EMD
₹ 196000.0 /-

Tender Value
₹ 1.21 Crore /-

Submission Date
19-01-2026

Competition Type
Indian

Bidding Type
Tender

Need a Business Loan? Apply Now !


1	Dismantling plain or corrugated steel sheeting any gauge, thickness in roof covering.
2	Taking down/Dismantlinig wrought iron or mild steel work of any description not otherwise proveded for.
3	S&FRolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates to Fe-290 (Gde E- 165) complete all as specified
4	All as per item No. 3 above but for fixing only.
5	S&F pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
6	S&F pre painted galvatume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified.
7	S & F Plain aluminium 0.71 thick sheeting alloy 31000 H4 in ridges, hips, valley gutter, drip and straight flashing.
8	S&F Flat iron of any size as in wind/wall ties conforming to Fe-290 Gde E-165.
9	S & F 20mm thick 2nd class hard wood Clean sawn with butt joints as in fascia,Boarding, fixed with nails in any situation (except flooring and skirting) complete all as specified and directed.
10	Removing complete existing treatment incl pcc pedding of roof surfaces by picking, sweeping clean and washing down with water to remove dust etc.,
11	M&L for brushing neat cement slurry with 03 Kg of cement per Sqm
12	M&L for rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 . (Internal water proof compound measured seperately)
13	M&L 25 mm thick cement concrete PCC Type B0 1:2:4 using 12.5 mm graded aggregate.
14	M&L APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced applicationincluding coating the surface with water based bituminous primer blow bitumen of 85/25 or 90/15 at 1.2 Kg/Sqm both at bottom and top of the membrance and finally finished with one coat of bitumenous aluminium primer at 100 gm per sqm complete all as specified.
15	Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) any thickness, including cover fillets.
16	S&F for Anodised aluminium/ GI snap grid power coated framed work of size main runner 39x24.70x0.80 mm, cross tee size 29.x24.70x0.80 mm, wall angle 22.2x22.2x0.65 mm and size of grid 605x605 mmfor false ceiling all as specified with 4mm thick GI suspender complete all as specified and as directed.
17	M & L for 4m thick Non Asbestos designed Cement E boardas approved by GE of size fixedin ceiling as specified and directed.
18	Taking down Chowkats or frames not exceeding 1.5 Sq. M each (Without taking off shutters from the frames)
19	Taking down Chowkats or frames exceeding 1.5 Sq. M but not exceeding 4 Sq. M each (Without taking off shutters from the frame)
20	Pressed steel frames size 125 x 60mmfor doorswith one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed
21	Pressed steel frames size 105 x 60mmfor doorswith one or more rebatesincluding necessary fixinglugs, hinges, lock strike plate,etc., complete, as specified,supplied and fixed
22	S&F mild steel flat iron of size 50x3mm as in hold fast
23	M&L PCC 1:3:6 type C1 using 20mm graded stone aggregate for fixing of hold fast and making good all as specified and directed.
24	S & F 35 mm thickSecond class hard woodkiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.
25	S&F 35 mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides. Make : Century Ply, Green Ply, Archid Ply or equivalent as approved by GE.
26	S&F three track powder coatedAlum anodised sliding window having two glass shutter and one gauge shutterframe made up 130 mm /41 mm 1.6 mm thick aluminium section & shutter made up 45 mm / 25 mm/1.3 mm thick without sash bar alum sectionincluding all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc as directed by engr in charge. (Note: The unit rate quoted by contractor include cost of glass and gauge includes all other connected
27	S&Fpowder coatedAlum anodised fixed ventilaters having half fixed and half 100mm wide glass louvers frame made up 62 mm /29.5 mm 1.5 mm thick aluminium section including all necessary joining cleats,hold fast ,rubber gasket anodised snap beading,anodised alumn fittings,suitable alumn handle and locking arrangment etc as directed by engr in charge.(Note: The unit rate quoted by contractor include cost of glass and includes all other connected
28	S & F Solid PVC Door Frame of size 100mmx45 mm made out of 5mm wood grain colour PVC Sheet reinforced with MS Square etc.
29	Supply and fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. .frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail,; Paneling of plain colour PVC sheet to be fitted in the M.S.frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification complete all as specified and as directed.
30	M&L2nd class hard wood in scantling wrought timber unframed and fixed
31	M&L in repairs PVC board 18/19 mm thick100% LEAD Free density not less then 600 Kg/Cbm (prelaminated single side) as in kitchen cabinets, cup boards, and similar work with and incl piano hinges, magnetic catcher one peace each shutter and 100mm long SS handles, includind dismantling complete.
32	S&FGI wire cloth with 0.63 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium stapple complete all as specified and directed.
33	S&F framed work such as grills, gratings, etc with ends of bars shouldered and/or revited, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work confirming to Fe.290. Gde-E-165
34	S & F100 mm long extruded aluminium alloy with galvanised mild steel Butt hinges and fixed type B-21.
35	S & F 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised.
36	S & F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section
37	S & F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy.
38	S&F solid PVC wall lining consisting of 5mm thick colour wood grained PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per spcifications and drawing.
39	S&F 5 mm thick PVC sheet fillet of width 35 mm for wall paneling inclusive of fixing on to wall to make PVC frames as per specifications.
40	M&L for 25mm thick PCC 1:2:4 type B-0 using (12.5mm graded stone aggregate ) as in sunken floor mixed water proofing compound finished surface even and smooth with using extra cement complete all as specified and directed.Note : water proofing compound shall be measured seperatly.
41	Rendering 15mm thick cement plaster in cement mortar 1:3 as in brick/concrete surface of sunken portion using water proofing compound complete all as specified and directed.Note : water proofing compound shall be measured & paid seperately
42	M&L wire brushing and cleaning top surface of cement concrete including flashings and junction of parapet etc. and surface painting with a layers of blown grade bitumen of any penetration applied hot @ 1.7 kg per sq.m. blinded with grit or pea size gravel @ 0.006 cu.m. per sqm and lightly tampered (area of flashings, etc., shall be added to the roof area) complete all as specified and directed.
43	M&L for PCC 1:5:10 type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.
44	Dismantling floor, hearth or wall tiling incuilding cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the permises.
45	Glazed ceramic coloured tiles in vertical surfaces 450x 350x 7 mm thick set and jointed in neat cement slurry & painted in white or colour cement to match incl screed bed 10 mm thick in CM 1:4 .
46	Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness. (Below or above ground level)
47	M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in sub base flooring 25 mm thick surface finished even andrough to receive the topping layer complete all as specified and directed.
48	M/L Vitrified Ceramic tiles 10 mm thick (square/ rectagular) dark/colourshade polished,area of each tilesnot exceeding 0.36 sqm ,in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match as in floors over 20mm thick screed bed in CM 1:6 complete all as specified and directed.
49	-do-but on vertical surface of wall of size 600x600x10mm thick as in dado/skitting including 10 mm thick renderingin CM 1:4
50	M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.
51	M&L Heavy duty Coloured Ceramic Tiles 600x600x 15mm thick, in Floors, set and jointed in Neat Cement Slurry and pointed in White Cement mixed with Pigment to match the colour of tiles over and including 15 mm thick screed bed or bedding layer in CM 1:4, complete all as specified and directed.
52	-do-but on vertical surface of wall of size 600x600x15mm thick as in dado/skitting including 10 mm thick renderingin CM 1:4
53	M & L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like 15mm thick in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite,including rubbing,rounding of edge stone slab andpolishing complete all as specified and directed.
54	M&L for PCC 1:3:6 type C2 using 40mm graded stone aggregate, 75mm thick in plinth protection laid in panels and finished even and smooth without using extra cement including necessary form work complete all as specified and directed. Note : Joints 12mm wide to the full depth of PCC shall be provided at every 3 meters and at every change of direction and shall be filled with mixture of bitumen and sand 1:3 by weight. Cost of this provision shall be deemed to be included in the quoted rate for concrete in plinth protection.
55	M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.
56	M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.
57	Demolition of brick work or stone/ boulder masonry built in cement mortar or cement lime mortar including removal to rubbish complete all as specified and as directed.
58	M&L for brick work with burnt modular bricks built in cement mortar 1:6 straight or curved on plan exceeding 6mtr mean radius and all as directed.
59	M&L for half brick work burnt modular bricks built in cement mortar 1:4 straight or curved on plan exceeding 6mtr mean radius and all as directed.
60	Demolition of RCC as in bands, lintel and similar suspended work.
61	Use and waste ofform work to soffits of ssupended slabs such as roof slabs, floor slabs, landings and similar works n.exc 200mm thick (Horizonal or slopping) for rough finished surface of concrete.
62	M&L for reinforced cement concrete (nominal mix) type B0 1:2:4 (12.5mm graded stone aggregate) Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
63	M&L for MS TMT bars,5mm dia and over upto and incl 10 mm dia in spacers, stirrups and binders , hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality confirming to Fe-410-W or Fe 290 (as in rungs/handles).
64	Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc.
65	M&L for 15mm thick plaster in two layers on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight of cement face of conc work to wall surface and the surface is finished even and smooth without using extra cement.WPC paid separetely
66	M&L rendering 15mm thick on other than fair faces of brick or concrete Surfaces in cement mortar 1:6 finished even and smooth.
67	M&L rendering 5mm thick of cement plaster 1:3on concrete surfaces of ceiling finished even and smooth(without using extra cement.).
68	Supply only Integral water proofing compound
69	M & L for preparation of newly plastered surfaces ofwall and applying 1 mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali reseistance priming paint complete all as specified and directed.
70	M&L forpreparation of new plastered surfaces of walls and applying two coat of cement base paint over a coat of primer complete.
71	M & L for preparation of newly plastered surfaces ofceiling and applying 1 mm thick wall care putty and applying two coats of oil bound distemper over a coat of alkali reseistance priming paint complete all as specified and directed.
72	M&L forpreparation of old deocorated surfaces of walls and applying two coats of oil bound distemperover a coat of primerincluding Washing, rubbing down and stopping of with sand paper complete.
73	M&L for Preparation old decorated plastered surfaces of wall and applying one coat of cement base paint all as specified and directed.
74	M&L forpreparation of ceiling applying one coats of white wash complete all as specified and directed.
75	Preparation of new or previously treated wood surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of pink primer over applying two coat of synthetic enamel paint.
76	Preparation of new or previously treatedsteel surfaces of any description, over 10 cm width or girth, not otherwise described appling one coat of Red Oxide, zinc chorme and applying two coat of synthetic enamel paint.
77	Taking down of eaves gutters and rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.
78	M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors of 75 mm bore of pipe etc complete all as specified and directed.
79	M&L for PVC (SWR) pipessingle socketed, in any length with rubber ring joints, laid in trenches or in floors of 110 mm bore of pipe etc complete all as specified and directed.
80	S&F PVC (SWR) bends any radius of 110 mm borewith outaccess door complete all as specified and directed.
81	S&F PVC (SWR) bends any radius of 75 mm borewith outaccess door complete all as specified and directed.
82	S&F PVC (SWR) bends any radius of 110 mm borewithaccess door complete all as specified and directed.
83	S&F PVC (SWR) bends any radius of 75 mm borewithaccess door complete all as specified and directed.
84	S&F PVC (SWR) vent cowl 110 mm bore complete all as specified and directed.
85	S&F PVC (SWR) vent cowl 75 mm bore complete all as specified and directed.
86	S&F stack clamps made out of 50 mm x 5 mm flat iron and 16 mm dia round iron stays, including bolts and nut and securing ends of stays to wall or roof for100 mm bore of pipe complete all as specified and directed.
87	S&F 100 mm bore Cast Iron ‘P’ or ‘S’ trap all as directed.
88	S&F 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement
89	PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement
90	S&F in repair PVC connection 15mm size with PTMT nuts of length 450mm complete in repairs.
91	S&F in repairs SS Grating doom 125 mm dia with /with out waste holecomplete all as specified and directed.
92	Taking up or down 15 mm bore steel tubing and connections, including cleaning for Refixing or removal to store
93	Taking up or down 20 mm bore steel tubing and connections, including cleaning for Refixing or removal to store
94	Taking up or down 25 or 32 mm bore steel tubing and connections, including cleaning for Refixing or removal to store
95	Supply and laying 20 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
96	Supply and laying 25 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
97	Supply and laying 32 mm dia CPVC pipes SDR 11 & plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified.
98	Dismantling water tanks of any description, capacity exc 500 and not exc 1000 litres and removing from site complete all as specified and directed.
99	S&F in repairs Ball brass valves, high pressure with polythene float and fly nut complete screwed for iron pipe or brass ferrule of20 mm bore dia of pipe complete all as specified and directed.
100	S&F in repairs Gun metal globe or gate valves with iron wheel head screwed both ends for iron pipe of 20 mmbore dia of pipe complete all as specified and directed.
101	S& F in repairs forVitreous China (Pedestal pattern) Vitreous china premium/ 1st quality wash down water closet wall hung EWCwhite/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc. pipe) incl PVC seat cover complete in all respect all as specified. “long pan”, size 580 mm white with ‘P’ or ‘S” trap, front or back inlet and foot rests, any pattern (excluding flushing cistern and flush pipe)
102	S&F for in repairshealth faucet (ABS Body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connection and fixed in position complete in all respect as specified.
103	S&F in repairs for 10 Ltrs. Capacity PVC flusing cisternlow level slimline or equivalen make / model with all accessories.
104	S&F in repairs vitreous china wash basinwhite, flat back, size 550x400mm excluding taps , waste ,but including barkets.
105	S&F 15mm bore bib tap cast copper alloy fancy type chromium plate with crutch or butter fly handle screwed down for iron pipe but fancy type.
106	S&F in repair 15mm bore angular stop cock/valve cast copper alloyscrewed down high pressure with crutch or butter fly handle screwed both end for iron pipe complete.
107	S&F PVC connector 600mm long with brass coupling in both ends screwed down for iron pipe.
108	S&F 15mm boreCP mixer for mixing hot & cold water screwed down for iron pipe and fixed\"H\" or \"C\" with long screwed shank and fly nuts screwed for iron pipe etc complete all as specified and directed.
109	S&F Toilet paper holder with flat recessed type stainless steel Complete all as specified and directed.\"
110	S & F brass CP Tubular towel rail 20mm dia fixed to wall complete all as specified and directed
111	S & F 20MM Brass CP curtain railwithCP brackets fixed to walls complete all as specified and directed.
112	S & F in repairs Chromium plated shower rose 125 mm size with or without swivel joints, any size, including fixing tosteel pipe or union
113	S&F in repair chromium plated single lever wall mixer 3-in-1 system with provision of both shower and hand shower complete with 115mm long bend pipe, connecting legs and wall flange complete.
114	S & F Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long fixed to wall complete all as specified and directed.
115	S&F in repairsLooking mirror 5.5 mm thick of selected quality glass of size 600 x 450 mm bevelled edge ,mounted on wall with stud pin complete all as specified and directed.
116	S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495 mm x 420 mm bowl size 410 mm x 330 mm x 160 mm complete all as specified and directed.
117	M&L for 75mm thick PCC 1:3:6Type C-2 using 40mm graded stone aggregate in pavement/hard-standing laid in alternative panels, surface finished evenincluding necessary form work,complete all as specified and directed.
118	M&LforProviding and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand
119	M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in lintels upto 1.5 m clear span, coping, benching, bed block, lintel band, plinth courses etc and similar work including weathering,slightly rounded or chamfered angles and throating including necessary form work complete all as specified and directed.
120	M&L for PCC 1:3:6 type C-0 in filling of pressed frame.
121	S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.complete all asapecified and as directed.
122	S&F 30 mm thick Flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides.
123	S & FSolid PVC Door Frame of size 50mm x 47mmmade out of 5mm plain colour PVC sheetreinforced with M.S. Square tube, suppling & fixing in opening as per specification &drawing etc complete all as specified and directed.
124	S&F anodised aluminium frame for doors, windows, ventiletors with one or more rebates including joining cleat for fixing etc complete all as specified in cl power coating above aluminium section.(minimum thickness of poweder coating 50 micron).
125	S&F for anodised window/ventiletor shutters, side hung type without sash bars aluminium section weighing 0.55 kg/m including necessary joining cleats,glazing clips,ruber neoprene packing,anodised aluminium snap beading screws,anodised aluminium fittings such as peg stays 150 mm long(1 no),hinges type-B-21 100 mm long( 2 no) suitable handle 1 no complete all as specified incl power coating of any colour (thick ness of powder coating not less than 50 micron).
126	S & F 4 mm thick Sheet glass, ordinary quality and glazing with wooden beadsin squares not exceeding 0.5 Sq. M in each pane
127	S & F 4 mm thick frosted glass, ordinary quality and glazing with wooden beadsin squares not exceeding 0.5 Sq. M in each pane
128	S&F wire netting of stainless steel wirewith 1.40 mm dia fixed with tinned tacks of stainless steel wire staples,12 mm mesh size complete all as specified and directed.
129	M&L in repair 18/19 mm thick pre-laminated particle boards exterior grade prelaminated both sides with decoratative choice lamination fixed in alum frame work.
130	M&L for Plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) as in hold fast.
131	Supply fix in repairs Harrison rails, mild steel, chromium plated fixed alongwith 2 Nos. of brackets, stops, rollers etc, complete all as specified.
132	Supply & Fix in repairs vitreous china wash down water closet pan (pedestal pattern) white excluding fixing bolts, flushing cistern & flush pipes.
133	S&F in repairs brass cromium plated Tubular Towel Rail 20 mm dia, D Type, 60 cm long between flanges. (Minimum weight 190gms)
134	S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar of dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mmx460mm bowl size 410mmx330mmx160mm.
135	S&F in repair kitchen plate rack made of stainless steel sheet not less than 0.63 mm thick of over all size 1050 x 750 x 250 mm complete all as specified and as directed.
136	M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.
137	Demolition of stone slabs tiles of any description or thickness in floors apronslaid bedded and pointed in any morter etc
138	M & L for granite of any type 20 mm thick machine cut bedded and jointed with grey cement slurry and pointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors.
139	M& L for Kota stone slab flooring of 20-25 mm thick over cement screed jointed with grey cement slurry mixed with pigment to match the shade of slab including grinding and polishing complete incl 20 mm thick screed bed 1:6 CM in floors.
140	M& L for Kota stone slabof 20-25 mm thick in riser,of steps, skirting, dado over cement screed jointed with grey cement slurry mixed with pigment to match the shade of slab including grinding and polishing complete incl 10 mm thick screed bed 1:4 CM in floors.
141	M&L for 100 mm thick cement concrete type B-2 (1:2:4) using 20 mm graded stone aggregate as in path/hardstanding/sub base complete all as specified.
142	M&L for Chequered cement concrete tiles 30cm x30cm x 25mm thick, set, jointed and pointed in neat cement slurry with grey cement and pigment in floors including 20 mm thick screed bed in CM 1:4 complete all as specified and as directed.
143	Rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 and even and smooth without using extra cement including mixing of water proofing compound wherever required for floors and sides of wall in sunken floorsNOTE: Water proofing compound will be measured separately
144	M&L applying one coat of NITTO proof to sides and bottom of floors to sunken floors.
145	Taking down rain water pipes inculding all fittings any size and pattern
146	S & F 75 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls.
147	S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes double socketed in any length with rubber ring joints fixed in walls.
148	S & F 110 mm bore PVC (SWR) junction single (Single `T\") equal or unequal with access door
149	S & F 110 mm bore PVC (SWR) Vent Cowl
150	Supply & fix 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed.
151	M&L 75 mm bore for cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
152	M&L 75 mm bore for cast iron Nahani trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
153	S & F in repairs 15 mm bore chromium plated bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule.
154	S & F in repairs 15 mm bore Fancy type pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed.
155	Material & Labour for preparation of new wall surface applying Two or more coats of 100% Premium acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface over 1 mm thick wall care putty.
156	M & L for Complete removal of old surfacefor preparation of new wall surface applying Two or more coats of 100% acrylic exterior emulsion paint with silicone additives of required shade additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @2.20 litre/ 10 sqm over new surface.
157	M&L for preparation of new plastered surfaces of walls and applying two coats of acrylic distemper including one coat ofchalk whiting on plastered surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.
158	M&L for complete removal of old surfaces of walls and applying two coats of acrylic distemper including one coat ofchalk whiting on plastered/putty surface to prepara-tory to distempering complete all as specified and directed over 1 mm thick wall care putty.
159	Preparing new surfaces of ceilings by brooming down or by steel wire brushing and applying three coats of white wash.
160	M&L for preparation of old decorated plastered surfaces of ceiling and applying one coat of white wash complete.
161	M&L for preparation of old decorated plastered wall surface applying one coat of white wash on wall all as specified and directed
162	S&F 500 Ltrs. Capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position all as specified including 20mm bore ball brass valves, high pressure, with polythene float and flynut complete screwed for iron pipe or brass ferrule and fixed Including dismantling PVC/RCC water tanks and removing to store n exc 500
163	S & F facroty made Second class hard woodkiln seasoned and chemically pressure treated plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue pinned at joints.
164	S & F 35 mm thick Ist class hard woodkiln seasoned and chemically pressure treated Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc., (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut mitred beads for securing glass etc.
165	Supplying and fixing in frame at site, factory made solid panel pvc moulded doorshutter 28 to 30 mm thick (style) with 2,4,or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing.
166	S&F mild steel framed work such as grills, gratings etc with ends of bars shouldered and / or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings,frame work of watertanks and similar work conforming toFe -290 Gde E-165 complete all as specified and directed.
167	S&F mild steel flat ironas in hold fast
168	S & F100 mm long medium weight, cold rolled mild steel Butt hinges and fixed.
169	Supply & Fix in repairs Vitreous EWC size 580 x 440 mm white withincludig \"P\" or \"S\" traps.
170	M&LNon - skidcoloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured including Screed bed or bedding layer of cement mortar 1:6, 15 mm thick for laying floor finishes.
171	As per Ser No 140 above but on vertical surface of wall as in dado/skitting including 10 mm thick renderingin CM 1:4
172	S & F chequered cement concrete tiles of size 300x300x18 to 20mm thick in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles as in floor including 15mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
173	Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided complete all as specified and directed
174	M & L applying one coat of NITTO proof to sides and bottom of plaster surfaces to avoide water seepage complete all as specified and directed.
175	M&L for 15mm thick plaster on fair faces of brick work or concrete surface in cm (1:4) with wpc @2% by weight face of conc work to wall surface and the surface is finished even and smooth without using extra cement
176	Dismantling plain or corrugated asbestos sheeting any thickness in roof covering.
177	Dismantling of timber boarding of any description fixed in any position with nails complete all as specified and directed.
178	S&F50 mm bore sand cast cast iron soilwaste in any length with or without ears with cement joints laid in trenches or in floors
179	S&F 50 mm bore bends any radious with ducks foot or heel rest.
180	M&L 50 mm bore for cast iron floor trap with grating incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)
181	Preparation of old paintedsteel surfaces of any description, over 10 cm width or girth, not otherwise described appling onecoat of synthetic enamel paint.
182	Preparation of old painted wood surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coat of synthetic enamel paint.
183	Taking down carefully existingunserviceable copper/ aluminiumpoint wiring (light,call bell, two way, socket orpower point etc)completewith fittings/fixures such asswitches sockets, ceiling rose, fan regulators,bracket light fittings and making goodto the disturbedsurface complete all asdirected by Engr-in-Charge.
184	Taking down the existing unservicable main switch/ cut out/ DBs of any type/ capacity/ description as existing at site including making good the disturbed surfaces to match with the existing finishes all as specified by Engr-in- Charge.
185	Taking down carefully unsv aluminium submain wiring of any type /loc includingconduit /casing and earth wire and making good the distributed surface of walls /ceiling matching with existing finishes all as directed by Engr-in-Charge.
186	Taking out unsv UG Cable any cross sectional area and connection of any description of any description laying in trenches or fixing with wall or poles all as specified and directed.
187	M & L for Point wiring with 1.5 Sq mm copper conductor single core FRLSH PVC insulated unsheathed 1100 Volts multistranded drawn through and including rigid PVC Concealed conduit and its accessories of suitable size, high grade ISI markedin walls /roof and PVC boxes of suitable size including fixing/grouting sunken/ surface as per site requirement for mounting the switches / sockets/ regulators etc including running up of 1.5 Sq mm copper conductor FRLSH PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly all as specified for :(a) One light point controlled by one, one way switch 5 Amps
188	All as per item No 187 above but one ceiling fan / exhaust fan point controlled by one , one way switch and regulator
189	All as per item No 187 above but one 3 point 5 Amps socket outlets point controlled by one switch on the same board
190	All as per item No 187 above but one 3 pin 5 Amps switch socket outlet point controlled by one switch on independent board
191	All as per item No 187 above but description all as per item No 192 here in before but for one light point controlled by one, two way switch 5 Amps
192	All as per item No 187 above but with two run of 2.5 sqmm multi stranded Single core copper conductor 1100 volts grade FRLSH PVC insulated sheathed cable with one run of FRLSH PVC 2.5 Sqmm multi standard insulated sheathed copper wire as earth continuity conductor along with wiring and connecting to the common earth dolly on independent board.
193	S & F Switch piano (White)flush type single pole one way 5 Amp, 230 Volts complete all as specified.
194	S & F switch piano single pole flush type(white), two way, 5 amps, 230 volts.complete all as specified and directed.
195	S & F Socket outlet (White)2 in 1, 5 pin, 5 Amps complete all as specified and directed.
196	S & F Switch socket combination(White)flush type multipurpose 5 pin 5 Amps two in one , 230volts complete all as specified
197	S&F Switch socket combination (White)2 in 1 5/6 pin, 15 Amp flush type universal.
198	S&F ceilling rose (White)three terminal surface bakelite type AC 50 Hz 230 Volt of size 65x50mm complete all specified
199	S & F ceiling fan regulator (White)step type 2 Module, flush type heavy duty suitable to work on 230 Volt AC supply complete all as specified.
200	S & FLamp holder (White)with insulated body, with back plate suitable for batten fittingscomplete all as directed.
201	S&F in replacement decorative, wall mounting, champagne gold finish fixture with plastic body suitable for 9 W LED lamp B22 base made out of polycarbonate with unbreakable globe/frame suitable for LED bulb and provision of LED bulb 09 watts complete all as specified and as directed. Model No. LHFOECE1TZ1O014 of Havells or Equivalent in Crompton /Philps / Surya
202	S & F LED ADORE 10 W B22 CDL 5 STAR LAMPwith B 22 base capacity 1200 lumencomplete all as specified.Make- Havells equivalent in CG /Surya /Philips.
203	S & F sheet metal enclosure MCB DBTPN 4 way with 200 amps rated bus bar 415 volts double door with magnetic locking system complete including grouted on walls all as specified
204	S & F MCB TPN 415 volts suitable for fixing in MCB DB of capacity 63 amps complete all as specified and directed.
205	S & F sheet metal enclosure MCB DBSPN 8 way with 200 amps rated bus bar 230 volts double door with magnetic locking system complete duly groutedall as specified and direted.Make-L&T or equivalent in Schneider/ Legrand/ABB.
206	S & F MCBSPN230volts suitable for fixing on MCB DB of capacity 40Ampscomplete all as specified.Make -L&T/Schneider/Seimens/Legrand
207	S & F MCB SP, 240 volts, 6-32A Amps 50 Hz ,confirms to IS/IEC 60898 Breaking Capacity of 10 kA, B-curve, complete all as specified and directed. Make L&T and equivalent in Schneider/ Legrand / ABB
208	Supply and fixing LED Tube lights batten fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed with efficacy not less than 110 lumens per watt.
209	S & F Energy saving new generation environmental friendly long life versatile presure die cast aluminium IP 66 security light fitting luminaire with high power LEDs as light source and PC Cover having TOP opening seperate driver compartment with IP 66 Protection and impact resistance of IK07 with electronic driver of capacity 20 watts with pre wired andnecessary mounting arrangements, provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting and GI pipe bracket made out of GI pipe medium grade 32 mm dia 1.5 mtr long bend to required shape duly fixed with Clamps nuts and bolts complete all as directed by Engineer-in-Charge. Make- Havells Cat Part No. LHEXAYP7PN6K020 or equivalent in/CG/Surya / Philips
210	Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light completewith driver, holders & LED lamp suitable for roof ceiling including connecting up with driver threecore flexible copper conductor cases of suitable size complete all as specified and directed.
211	Supply and fix in replacement of Single pole andneutral enclosure with a two pin and earth plugAC socket complete with one single pole MCB complete all as specified and directed.
212	Excavation in trenches n exc 1.50 m wide andn exc 1.50 m depthin soft /loosesoil andgetting out for lying of cable and errection pipeetc complete all as directed.
213	Returning, filling in, trenches insoft /loose soilincluding spreading, leveling, watering and well ramming in layers not exc 25 cmcomplete all as directed.
214	Removal of excavated soil to a distance n. exc 50 m and depositing where directed at a level n.exc 1.5 m above the starting pointcomplete all as directed.
215	M & L sand cushioning in trenches for cable protection with coarse sand laid dry in trenches with uniform thickness including consolidation complete all as directed.
216	Supply & Laying well burnt brick , locally available best quality (sub class \"B\" bricks ) laid in trences perpendicular to UG Cable protection complete all as specified.
217	Supply & Laying XLPE LT heavy duty UG Cable of size 25 Sqmm .3.5Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab and equivalent in Havells and Gloster
218	Supply & Laying XLPE LT heavy duty UG Cable of size 10 Sqmm 2Core laid in trences /floor/on wall/service connection PVC Insulated, sheathing and armd 1100 Volts grade with aluminium conductor including connection to the main switch/cut out MCB/MCCB with necessary lugs after cutting to required length complete all as specified and directed. Make :- Polycab and equivalent in Havells and Gloster
219	S & F GI Tubing light grade of size 40mm dia in protection of cable at road crossing /hard standing/pole protection fixed with clam as per site requirement etc all as specified and directed.
220	Taking down ceiling fan/ Exhaust Fan of any sweep, keeping with safe custody and refixing the same with replacement of unsv core PVC insulated PVC sheathed 3 core multistranded copper conductor cable of size 23/0.193 from ceiling rose to fan terminal over hauling the fan complete duly painted with 2 coats of synthetic enamel paint complete all as specified and as directed.
221	M&L for replacement Sub main wiring2 x 6 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduitand continuous earthwire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
222	M&L for replacement Sub main wiring2 x 4 Sqmm multi-strand FRLSH PVC insulated copper conductor unsheathed cable including concealed conduitand continuous earthwire of FRLSH PVC insulated multi-strand copper conductor of size 6.0 sqmm complete all as specified and directed. Connections of cables with MCBs or bus bars shall be done through appropriate size brass/copper thimbles.
223	M & L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6 mm thick burried directly in ground to a depth not less than 2.25 mtrs below ground level with top edge of earth plate not less than 1.5 mtrs below normal ground level connected to GIearth wire 4 mm dia drawn through and including GI protection pipe of light grade 15 mmbore by means of bolts, nuts, check nuts and washers including excavation earth work provisioning of PCC chamber made of PCC 1:3:6 RCC cover funnel with wiremesh 20mm dia watering pipe Medium grade, GI protection pipe 20mm dia bore all as specified in Electrical Plate No.3 of SSR Part I.
224	Supply and Fix Cable end termination kit for LT1.1 KV Cable for Cable 25 to 50 Sqmm 3.5 Core cable complete all as specified and directed .
225	Supply and Fix Cable end termination kit for LT1.1 KV Cable for Cable 10Sqmm 3.5 Core cable complete all as specified and directed .
226	S & F Switch piano (white) single pole flush type, two way, 6 amps, 230 volts.complete all as specified and directed.
227	S & F bell (white) pushflush type 5 amps, 230 volts.complete all as specified and directed..
228	S & F call bell suitable to work on 230 volts Ac supply complete all as specified.
229	S & F MCB \"B\" series single pole 5 to 32 Amps, breaking capacity 10KA.
230	S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired andnecessary mounting arrangements , provision of new 3 core multistrandedcopper conductor of size 23/0.193 from ceiling rose to fitting all as directed by Engineer-in-Charge.
231	Boring holes horizontally under Road without damaging the surface of Road of any type (minimum 1.0 METRE below the Road Surface with the help of GI Tubing not exc. 40mm bore (dia) for passing of UG Cable, complete all as specified and as directed. NOTE: GI Pipe laid will be measured and paid separately under appropriate Item.

Tender Documents

SR No	FileName	File Description
1	Click here to download tender document	Tender Documents
2	Click here to download tender document	Tender Documents
3	Click here to download tender document	Tender Documents
4	Click here to download tender document	Tender Documents

Also Visit

Tenders

Assam Tenders

Construction Tenders

Building Construction Tenders

Building Work Tenders

Disclaimer

We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.

Top

Tender For Special Repairs Of Bldg No P-18, P-2H, P-52 And P-91 At Various Units Under Ge Missamari, Missamari-Assam

Tender Documents

Disclaimer

About Us

Services

Browse Tenders

For Sales Inquiry

Tender For Special Repairs Of Bldg No P-18, P-2H, P-52 And P-91 At Various Units Under Ge Missamari, Missamari-Assam

Tender Documents

Disclaimer

OTP Verification

About Us

Services

Browse Tenders

For Sales Inquiry

Connect With Us