|
| 1 | Code No.2.8.1 Earthwork in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as per direction of Engineer-in-charge , within a lead of 50m - all kinds of soil |
| 2 | Code No.2.27 Supplying and filling in plinth with river sand under floors including, watering, ramming consolidating and dressing complete. |
| 3 | Code No.4.1.10Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:5:10 (1 cement: 5 fine aggregate : 10 graded stone aggregate 40mm nominal size) |
| 4 | Code No. 6.1.2Brick work with common burnt clay F.P.S. (non modular ) bricks of class designation 3.5 in foundation and plinth in - cement mortar 1:6 (1 cement : 6 fine aggregate) |
| 5 | Code No.5.1.3 Providing and laying in position specifiedgrade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement -All work upto plinth1:2:4 (1 cement : 2 fine aggregate : 4 graded stone aggregate 20mm nominal size) |
| 6 | Code No.5.2.2 Reinforced cement concrete work in walls (any thickness) , including attached pilasters, buttresses , plinth and sting courses , fillets , columns , pillars , piers , abutments , posts and struts etc. upto floor five level excluding cost of centering , shuttering , finishing and reinforcement - 1:1.5:3 (1 cement :1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size) |
| 7 | Code No.5.3 Reinforced cement concrete work in beams, suspended floors , roofs having slope up to 15degree landings , balconies , shelves , chajjas , lintels , bands , plain window sills , staircases and spiral stair cases above plinth level up to floor five level excluding the cost of centering ,shuttering, finishing and reinforcement , with 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size) |
| 8 | Code No.5.9.1 Centering and shuttering including strutting, propping etc.and removal of form for: Foundations , footings, bases of columns ,etc. for mass concrete. |
| 9 | Code No.5.9.6 Centring and shuttering includingstrutting, propping etc. and removal of form for: columns,pillars, piers, abutments,posts and struts. |
| 10 | Code No.5.9.5 Centering and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers. |
| 11 | Code No.5.9.3 Centering and shuttering includingstrutting, propping etc. and removal of form for : uspended floors, roofs, landings , balconies and access platform. |
| 12 | Code No.5.22.6 Steel reinforcement for R.C.C.work including straightening , cutting , bending , placing in position and binding all complete upto plinth level - Thermo -Mechanically treated bars Fe - 500D or more |
| 13 | Code No.6.4.2 Brick work with common burnt clay F.P.S (non modular ) bricks of class designation 3.5 in superstructure above plinth level upto floor five level in all shapes and sizes in - cement mortar 1:6 ( 1 cement : 6 fine aggregate) |
| 14 | Code No 6.12.2 Half brick masonry with common burnt class FPS ( non modular)bricks of classdesignation 35 in foundation and plinth in cement mortar 1:4 (1 cement : 4fine aggregate) |
| 15 | Code No 5.12Providing , hoisting and fixing above plinth level upto floor five level precast reinforced cement concrete work in string courses, bands, copings, bed plates, anchor blocks, plain window sills and the like, including the cost of required centering, shuttering but excluding cost of reinforcement , with 1:1.5:3 (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size) |
| 16 | Code No.9.1.2P Providing wood work in frames of doors , windows, clerestory windows and other frames , wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately) -Padak wood |
| 17 | Code No.9.5.1.1P Providing and fixing panelled or panelled and glazed shutters for doors, windows, and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately , all complete as per direction of Engineer-in-charge -(Note:- Butt hinges and necessary screws shall be paid separately) - Padak wood - 35 mm thick shutters |
| 18 | Code No.9.7.1P Providing and fixing panelling or panellingand glazing in panelled or panelled andglazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters25mm to 40mm thick: Padak wood |
| 19 | Code No.9.53 Providing 40 X 5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bots, nuts and wooden plugs and embeddings in cement concrete block 300 x100 x 150 mm 1:3:6 mix (1 cement : 3 fine aggregate : 6 graded stone aggregate 20mm nominal size) |
| 20 | Code No.9.48.2 Providing and fixing M.S.grills of required pattern in frames of windows etc with M.S. flats , square or round bars etc. including priming coat with approved steel primer all complete - Fixed to openings / wooden frames with rawl plugs screws etc |
| 21 | Code No 10.17 Providing and fixing M.S. fan clamp type I or II of 16mm dia M.S. bar, bent to shape with hooked ends in R.C.C.slabs or beams during laying , including painting the exposed portion of loop, all as per standard design complete |
| 22 | Code No.9.97.1Providing and fixing aluminium tower boltsISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete : -300x10mm |
| 23 | Code No 9.97.4 Providing and fixing aluminium tower boltsISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required Colour or shade with necessary screws etc. Complete 150 X 10mm. |
| 24 | Code No.14.35.2Providing and fixing bright finished brass hard drawn hooks and eyes - 250 mm |
| 25 | Code No.9.100.2 Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS:1868) transparent or dyed to required colour or shade with necessary screws etc.complete :-100mm |
| 26 | Code No 9.96.1Providing and fixing aluminium sliding door bolts , ISI marked , anodised ( anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade , with nuts and screws etc complete - 300 X 16 mm |
| 27 | Code No 9.165.1AProviding and fixing of 65mmNavtallock of 6 levers etc complete |
| 28 | Code No 11.37Providing and laying ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in colours such as white, Ivory, Grey, Fume red brown ,laid on 20mm thick cement mortar 1:4 (1 cement : 4 fine aggregate), jointing with grey cement slurry @ 3.3 kg/ sqm including pointing the joints with white cement and matching pigment etc., complete. |
| 29 | Code No 8.31Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS:15622(thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved, in skirting, risers of steps and dados, over 12mm thick bed of cement mortar 1:3 (1 cement : 3 fine aggregate) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete |
| 30 | Code No.12.15.1 Painting top of roofs with bitumen of approved quality at 17kg per 10sqm impregnated with a coat of fine aggregate at 60 cudm per 10 sqm including cleaning the slab surface with brushes and finally with a piece of cloth lightly oaked in kerosene oil complete: With residual type petroleum bitumen of grade VG -10 |
| 31 | Code No.12.20 Providing and laying pressed clay tiles (as per approved pattern 18mm nominal thickness of approved size) on roofs jointed with cement mortar 1:4 (1 cement : 4 fine aggregate) mixed with 2% integral water proofing compound , laid over a bed of 20mm thick cement mortar 1:4 (1 cement : 4 fine aggregate) and finished neat complete |
| 32 | Code No.13.1.2 12mm cement plaster of mix :Cement mortar1:6 (1 cement: 6 fine aggregate) |
| 33 | Code No.13.2.2 15 mm cement plaster on rough side of single or half brick wall of mix - cement mortar 1:6 (1 cement : 6 fine aggregate) |
| 34 | Code No.13.16.1 6mm cement plaster of mix 1:3 (1 cement : 3fine aggregate). |
| 35 | Code No 13.37.1 White washing with lime to give an even shade - new work (three or more coats) |
| 36 | Code No.13.44.1 Finishing walls with water proofing cement paint of required shade - New work. (Two or more coats applied @ 3.84 kg/10 sqm) |
| 37 | Code No.13.61.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade - Two or more coats on new work. |
| 38 | Code No.13.50.2 Applying priming coat - with ready mixed aluminium primer of approved brand and manufacture on resinous wood and plywood. |
| 39 | Code No.13.50.3Applying priming coat: with ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/steel works. |
| 40 | Code No.17.13.2 Providing and fixing white vitreous china water closet squatting pan (Indian type) Orissa pattern WC pan of size 580 x 440 mm. |
| 41 | Code No.31.160.1A Providing, laying and jointing UPVC pipes (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, UPVC specials such as bends,tees, threadedpieces, couplers ,reducer , endcaps etc.,complete all as per IS and CPWD specification. - 20mm dia. |
| 42 | Code No. 18.17.1A Providing and fixing gunmetal gate value with C.I wheel of approved quality (screwed end) - 20 mm nominal bore. |
| 43 | Code No.18.15.1 Providing and fixing brass bib cock of approved quality - 15 mm nominal bore. |
| 44 | Code No.12.41.2 Providing and fixing on wall face unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion, (i) single socketed pipes. 110mm diameter. |
| 45 | Code No.12.42.5.2 Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal xpansion. Bend 87.5deg. 110mm bend. |
| 46 | Code No.19.32.1A Making soak pit 2.5 m diameter 3 m deep with 45 x 45 cm dry brick honeycomb shaft with bricks of class designation 75 and 110mm dia UPVC pipe (type B) 1.8 m long complete as per stadard design with F.P.S.bricks |
| 47 | 17.35.2.1 Providing and fixing soil,waste and vent pipes - 75mm dia - sand cast iron S&S pipe as per IS: 1729 |
| 48 | Code No.16.95 Supplying fixing and commisioning of1 HP monoblock pumpset slow speed single phase motor. The rate include the cost of pumpset , pumpset fixing in position and test run etc. complete . |
| 49 | Code No.18.48A Providing and fixing rectangular high density polyethylene water storage loft tank with cover ISI: 12701 marked, colour of opaque white or as approved by Engineer-in-charge. The rate includes making necessary holes for inlet, outlet & over flow pipes. The base support including fittings and fixtures for tank shall be paid separately |
| 50 | 17.7.3 Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass pillar taps ,32mm C.P.brass waste of standard pattern ,including painting of fittings and brackets ,cutting and making good the walls wherever required - white Vitreous China wash basin size 550x400 mm with a pair of 15 mm C.P.brass pillar taps |
| 51 | 18.18.2 Providing and fixing ball valve (brass) of approved quality , high or low pressure , with plastic floats complete - 20mm nominal bore |
| 52 | Code No.1.1.1.1 supplying and fixing of following size of PVC conduit along with the accessories in surface / recess conduit including cutting the wall and making good the same in case of recessed conduit as required.Make: Avonplast / Vijaya:- 20mm dia. |
| 53 | Code No.1.1.1.2 supplying and fixing of following size of PVC conduit along with the accessories in surface / recess conduit including cutting the wall and making good the same in case of recessed conduit as required.Make: Avonplast / Vijaya:- 25mm dia. |
| 54 | Code No 1.1.2.1 Supplying and laying of following size of PVC conduit in roof slab along with the accessories Make : Avonplast/Vijaya 20mm dia. |
| 55 | Code No 1.1.2.2 Supplying and laying of following size of PVC conduit in roof slab along with the accessories Make : Avonplast/Vijaya 20mm dia. |
| 56 | Code No 1.1.3.1.3 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required . Avonplast/Vijaya – 20mm Jinction box three way. |
| 57 | Code No 1.1.3.2.2 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required . Avonplast/Vijaya – 25mm junction box two way. |
| 58 | Code No 1.1.3.4.3 Supplying and fixing of following size of PVC junction box in required position along the line of PVC conduit as required . Avonplast/Vijaya – 25mm junction box three way. |
| 59 | Code No 1.3.8Supplying and fixing of following size of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required – 250mmx200mmx50mm deep. |
| 60 | Code No 1.3.12Supplying and fixing of following size of Teak wooden board on recess including cutting the wall and finishing the surface good the same as required – 300mm x 250 mm x 50 mm deep. |
| 61 | No 1.5.1 Supplying and drawing of 1.5 sqmm FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC / steel conduit/PVC casing and capping as required. Make : finolex/ Polycap. |
| 62 | No 1.5.2Supplying and drawing of 2.5 sqmm FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC / steel conduit/PVC casing and capping as required. Make : finolex/ Polycap. |
| 63 | Code No 1.5.3Supplying and drawing of 4.0 sqmm FR PVC insulated, copper conductor, single core cable in the existing surface/recessed, PVC / steel conduit/PVC casing and capping as required. Make : finolex/ Polycap. |
| 64 | Code No 1.6.8Providing and fixing of following size phenolic coated sheet on existing wooden board 250mmx200mmx3mm thick. |
| 65 | Code No 1.6.12Providing and fixing of following size phenolic coated sheet on existing wooden board 300mmx250mmx3mm thick |
| 66 | Code No 1.7.1.1Supplying and fixing S.P 1 way /5/6 amps piano/flush type switch on the existing switch box/ cover including connection etc as required Make :kundan/Anchor/Vinay |
| 67 | Code No 1.7.1.4Supplying and fixing S.P.I 1 way 15/16 amps piano/flush type switch on the existing switch box/ cover including connection etc as required Make : kundan/Anchor/Vinay |
| 68 | Code No 1.7.1.6Supplying and fixing S.P.I 3 pin 15/16 amps piano/flush type socket outlet the existing switch box/ cover including connections etc as required Make : Kundan/Anchor/Vinay |
| 69 | Code No 1.7.1.10Supplying and fixing 16 amps Kit kat fuse on the existing switch box/cover including connection etc as required Make: kundan/Anchor / Vinay |
| 70 | Code No 1.7.1.14Supplying and fixing Electronic Dimmer 400 W socket type on the existing switch box/cover including connection etc as required Make: kundan/Anchor / Vinay. |
| 71 | Code No 1.7.2.1 Supplying and fixing 3 plate, 5 amps ceiling rose on the existing junction box/ wooden black including connections etc as required Make: kundan/Anchor/ Vinay |
| 72 | Code No 1.7.2.2 Supplying and fixing jumbo type battern/ angle holder including connections etc as required Make: kundan/Anchor/ Vinay. |
| 73 | Code No 1.7.3.16A Supplying and fixing 20A single phase DP main switch with keycard switch on the existing modular plate and switch box including connections but excluding modular plate as required make : MK |
| 74 | Code No 2.1.1 supplying and fixing following way single pole and neutral sheet steel, MCB distribution board, 240 volts on surface / recess complete with tinned copper bushbar, neutral busbar, earth bar, din bar, detachable glad plate, interconnections, phosphatized and powered painted including earthing etc, as required : (butwithout MCB/ /RCCB/Isolator)make :Siemens / ARB /L&T Hager, 4 way – SPN double door, MCB DB. |
| 75 | Code No 3051supplying and fixing 1x40Wbox type single tube light fittings with copper choke and starter without tube Make Philips / Bajaj. |
| 76 | Code No 3079 supplying and fixing 60W incandescent bulb, make : Philips / Bajaj. |
| 77 | Code No 3081 Supplying and fixing Bulk Head fittings aluminium alloy body heat resistant prismatic glass cover with specially designed gasket (GLS 100W type) Make : Philips / Bajaj. |
| 78 | Code No 3.1Earthing with G.I medium pipe 3.00 long and 40mm dia including accessories 250x50x6mm G.I clamp with 12mm bolt, nut and washer for connecting earth wire, RCC ring enclosure and cover plate complete as required. |
