|
| 1 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons Laid, bedded and pointed in any mortar etc complete all as specified and directed. |
| 4 | Demolition of Concrete is ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 5 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed. |
| 6 | Demolition of reinforcement cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 7 | M&L for cement concrete type D2,1:4:8 (using 40 mm graded stone aggregate) as in mass concrete complete all as specified and directed. |
| 8 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed. |
| 9 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed. |
| 10 | Taking down shutter including frame of cupboard of any description exc 1 sqm but n. exc 2 sqm each and removing from site complete all as specified and directed. |
| 11 | Taking up or down 15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. |
| 12 | Taking up or down 20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed. |
| 13 | Dismantling water tanks500 & n exc 1000 and removing to store of all retrieved material complete all as specified and directed. |
| 14 | Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed. |
| 15 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roofcoveringscomplete all as specified and directed. |
| 16 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 inluding one coat of zinc chromate primer before fabricationdistance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed. |
| 17 | S&F mild steelRolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates inluding one coat of zinc chromate primer before fabricationdistance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed. |
| 18 | S&F pre-painted galvalume aluminium zinc coating GI based semi corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 19 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 20 | M&L for E-board false ceiling consisting of powder coated GI wall angle, main T and cross Tof 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E-Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed. |
| 21 | M&L for Ceramic tiles light shade 7/8mm thick (square/rectangular) polished, area of each ( 600 x 600 ) in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement including screeding 15mm thick in CM 1:6 complete all as specified and directed. |
| 22 | All as per item no 21 but on verticle surfaces over 7/8 mm thick plaster in CM 1:6 complete all as specified and directed |
| 23 | M&L for glazed coloured ceramic tiles 600 x 300 mm x 7 mm thick in vertical wall complete or in patches surfaces set and jointed in neat cement slurry and pointed in white cement using pigment to match the shade of tiles including plastering 10mm thick in CM 1:4 complete all as specified and directed. |
| 24 | M & L for non- skid ceremic colouredtiles7 to 8 mm thick(Square / rectangular) areaof each tile exceeding0.11 Sqm but not exceeding 0.18 Sqm in floors etc set and jointedin neat cementslurry and pointed in whiteor colouredcement to matchover and including screed bed 15mm thick in cement mortar 1:6 for laying floor finishes including dismantling of tiles complete all as specified and directed. |
| 25 | M&L for 18-20mm thick Granite of any colour(table rubbed and polished) as in windows cill &cooking platforms and like in cement mortar (1:4) including form work , pointing in white cment (1:2) using marble dust with admixture of pigment to match with shade of granite with full round bull nosing edging complete all as specified and directed. |
| 26 | M&L for 75mm thick PCC 1:3:6 , type C-2 (using 40 mm graded stone aggregate) as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using and sand mixture in 1:3 complete all as specified and directed . |
| 27 | M&L for 25 mm sand cushion over PCC before laying interlocking tiles complete all as specified and directed. |
| 28 | M&L for cement Concrete coloured interlocking 60 mm thick paver blocks shall be factory made with casting in rubber/ pvc moulds & compacting on a vibro table assembly and shall be cured in curing tank for atleast 14 days and then air dried before use. The paver block shall be confirming to IS 15658 -2006 of60mm thickness, M-35 Grade. Approved design, shape, size and colour of top layer over 100 mm PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base floor/ pavings complete all as specified and directed. |
| 29 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm) including making drainage opening wherever required complete all as specified and directed. |
| 30 | M&L for providing precast cement concrete rubber moulded heavy duty chequered coloured tiles 300mmx300mmx10 mm thick even finished on top of approved design and pattern laying over and including 15mm thick screed bed in CM 1:4 complete all as specified and directed. |
| 31 | M&L for reinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent complete all as specified and directed. |
| 32 | M&L forreinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in Lintel/Roof beam and chajja including bonding agent , complete all as specified and directed. |
| 33 | S&F Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) completed all as specified and directed. |
| 34 | S&F Form work to sides and soffits of floor or roof beam, beam hings, girders bressume, lintles, contilevers, shelves,Chajjas including support over lungs etc also splays between floor and beams etc. completed all as specified and directed. |
| 35 | M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete complete all as specified and directed. |
| 36 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 37 | S&F Mild steel TMT bars 5mm dia and over upto and including 10 mm dia in stirrups,spaces and binders complete all as specified and directed |
| 38 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as specified and directed |
| 39 | M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed |
| 40 | M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fairfinishedwithout using extra cement with using water proofing liquid complete all as specified and directed.Note:- water proofingshall be measured and paid seprately. |
| 41 | S&F pressed steel frames size 105 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, including filling of PCC 1:3:6 supplied and fixed |
| 42 | S&F pressed steel frames size 125 x 60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, including filling of PCC 1:3:6 supplied and fixed |
| 43 | S&F for 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed . |
| 44 | S&F 30mm thick factory made Glazed and skeleton shutters, open rebated ofsecond class hard wood rail and stles and prepared to receive glass, gauze, etc. (without sash bars), divided into squared, with plain, cham-fered or rounded, mitred and rebated sash bars, any numbers sizes of members of shutters as specified in SSR Part I, Section 8. cla-use 8.20 (a); supplied and fitted to chowkats complete all as specified and directed by Engineer-in-Charge.(Note :- S & F Glass/gauge shall be measured and paid for separately) |
| 45 | S&F stainless steel wire cloth, 0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 46 | S&F 140 mm long floor door stopper of aluminium alloy body and tongue, brass body and tongue with hard drawn steel spring complete all as specified and directed. |
| 47 | S&F Solid Prelam PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 48 | S&F 30 mm thick factory made one side Prelam PVC sheet other side decorative (door shutter) used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing. |
| 49 | S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed. |
| 50 | S&F steel windows with pressed steel frame (size 95 x 45 x 1.25 mm ) side hung shutter including box type hinges with steel handle and steel peg stay with glazed openable shutter with glazing bar ( open out side ) and wie gauged openable shutter without glazing bar ( open inside ) dovetailed or welded complete all as specified and all as per DRG No TD/088 dt 07 Jan 2002 Note :- (i) Two shutters ie wire guaged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit(ii) rate for filling PCC in frame deemed to be included in quoted rates(iii) MS grill shall be measured and paid seperatly under relevant item of schedule |
| 51 | M&L for 3mm thick sheet glass ordinary qualityand glazing with oil putty in squares not exc. 0.5 Sqm in each pane complete all specified and directed. |
| 52 | S&F for (kitchen cabinet) made of 18 mm thick prelaminated PVC exterior grade with one side decorative laminated glossy finish & other side plain white as in shelves, side, back & door frame including PVC liping on all exposed edges of same texture & shade to match from laminated with selected quality modular type SS hydraulic concealed hinges glossy handle, maganet catcher complete all as specified and directed. |
| 53 | S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed |
| 54 | S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 55 | S&F 100 mm size butt hinges medium weight stailess steelcomplete all as specified and directed by Engineer-in-Charge. |
| 56 | S&F 300 mm size ordinary mild steel , rat tailed rod pattern spring including roller and roller platewelded to mild steel frame.fixed in repair complete all as specified and directed |
| 57 | S&F 300 mm long aluminiumsliding door bolts plate type with bright bolt not less than 16 mm dia with and including a minimum of 6 bolts and nuts, 04 Nos on bolt plate and 02 Nos on staple plate and fix complete all as specified and directed |
| 58 | S&F in repairs factory made PVC Cupboard frame of the size 50x47mm with a wall thickness of 5mm, made out of extruded 5mm thick plain/prelam PVC sheet of density 600 kg/cbm, having bottom width of 50mm and thickness of 10mm. All four frame lengths reinforced with 15 mm x 15mm M. S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners adjointed with 2 nos. of 15mm long brackets 0f 10mm x10mm M S square tubes. The door frame shall be fixed to the wall using 8/100 long M S screws through the frame by using PVC fasteners. A minimum of 4 nos. of screws to be provided for each vertical member and minimum of 2nos. of screws to be provided horizontal member etc. complete as per direction of Engr-in-Charge, manufacturer\"s specification and drawing. |
| 59 | S&F factory made PVC cupboard flush type shutter of 30mm thick consisting of frame made out M S tubes of 19 gauge thickness and size 19mm x 19mm for stiles and rails. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1mm wall thickness, bonded using solvent cement/ cynoacrylate adhesive with 5mm thick plain/prelam PVC sheet, on both side of inside panel incliding necessary items to fix the shuter to frame such as 100mm stailess steel hinges, 100 mm long handles made of anodised aluminium and magnetic ball catch for each pair of shutter.All four edges of the panel to be sealed with lipping of 10mm thick and 20mm wide PVC sheet baton (made by sticking 2nos. PVC foam sheet of 5mm thickness using PVC solvent cement adhesive).complete as per direction of Engr-in-Charge. |
| 60 | S&FPVC boards 18 to 20 mm thick any colour/ prelaminatedas in cabinets incl sshelves and shutters, fixed with screws and adhessive as per direction of Engr-in-Charge and, manufacturer\"s instructions including piano hinges, magnet catcher, handles etc. |
| 61 | S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed |
| 62 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 63 | S&F15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 64 | S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed |
| 65 | S&F in repair vitreous chinaware coloured wash hand basin with pedestalofsize 55X45X82cm complete including fancy 15 mm dia CP pillar tap, 32 mm dia CP Waste coupling, waste pipe, complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed. |
| 66 | S&F in repair fancy type 125mm sizebrass CP shower rose complete all as specified and directed |
| 67 | S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turn complete all as specified and directed |
| 68 | S&F in replacement 15 mm dia bib cock two way fancy type chromium plated with flange quarter turn complete all as specified and directed |
| 69 | S&F in replacementSS AE-SI 316 grade tubular towel ring complete all as specified and directed. |
| 70 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 71 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm complete all as specified and directed |
| 72 | S&F in repair fancy type chromium plated brass angle/stop valve type suitable for 15mm bore pipe complete all as specified and directed |
| 73 | S&F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified and directed |
| 74 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed |
| 75 | S&F in repairs 2 in 1 chromium plated wall mixture withconnectionfor shower arragement complete all as specified and directed. |
| 76 | S & Fin repair Vitreous china wash down closet (padestal pattern) white complete, black incl connection to drain pipe and to flushing pipe antisyphonage pipe etc complete all as specified and directed |
| 77 | S & F Plastic water closet white seat, black cover closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified. |
| 78 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed |
| 79 | S & F Brass CP hand shower (health faucet)with 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hookscrewecd for iron pipe fancy type long body all as specified and directed. |
| 80 | S & F in repair water jet of EWC chromium plated with PVC connection complete all as specified and directed |
| 81 | S&F in repairPVC (SWR) floor trap 75 mm dia outlet plain with grating with grating including jointing with solvent cementincluding jointing to waste pipe fixed in cement concrete 1:2:4, typeB-1 complete all as specified and directed. |
| 82 | S&FPVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting including of taking down of old pipe complete all as specified and directed by Engr-in-charge. |
| 83 | S&FPVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting including taking down old PVC pipecomplete all as specified and directed. |
| 84 | S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. |
| 85 | S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. |
| 86 | S&F designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified |
| 87 | S&F in repairs Stainless Steel plate rack of size 90x80x25cm made with 1.00 mm thick sheet including taking out existing wooden plat rack, complete all as specified. |
| 88 | S&F in repair 0.8 mm thick stainless steel kitchen sink size 590x460x230mmundermount,double bowl size 540x410x230 mm) , incl waste pipe & SS coupling, washers etc. complete all necessary fittings all as specified and directed. |
| 89 | S&F in repair20 mm dia stainless steel 1.0 mm thick fancy typecurtain droppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed |
| 90 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified anddirected by Engineer-in-Charge. |
| 91 | M&L for preparation of newuntreated wooden or wood based surfaces of any description not otherwise described over 10 cm width or girth and applying two coat of synthetic enamel paint over and including one coatof pink primer complete all as specified and directed by Engineer-in-Charge. |
| 92 | M&L for preparation of new plastered surfaces of wall and applying two coats of exterior weather proof exterior emulsion paint over a coat of 1mm thcik wall care putty complete all as specified and directed.Note:- Colour and pattern to be applied as pr approved by Stn Cdr) |
| 93 | M&L for preparation of old decorated surface of walls by brushing, scrapping down smoke soot mould by steel wire brush and applying two coats of weather proof exterior emulsion paint with airless electric sprayers over a coat of 1mm thcik wall care putty complete all as specified and directed.Note:- Colour and pattern to be applied as pr approved by Stn Cdr) |
| 94 | M&L for preparation of newly plastered surface of walls and applying two coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness wall care putty including necessary scoffolding upto four storey building heightcomplete all specified and directed Note :- Application to be done through authoried apllicator manufacturer.(ii) Putty surfac to be rubbing down with sander machine after getting dried all as directed to obtain a smooth & even surface. |
| 95 | M&L for complete removal of old distempered surface of walls including brooming down or steel wire brushing, scrapping down smoke sooot moulds, moss and efflorescen salts and trading oil and greasy spots and applying two coats of distemper oil emulsion with airless electric sprayers over 1 mm thickness wall care putty including necessary scoffolding upto four storey building heightcomplete all specified and directed Note :- Application to be done through authoried apllicator manufacturer.(ii) Putty surfac to be rubbing down with sander machine after getting dried all as directed to obtain a smooth & even surface. |
| 96 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 m in depth, getting out in soft/loose soil etc., in luding trimming bottom and sides of trenches, leveling/grading and ramming bottom of excavation complete all as specified and directed |
| 97 | Returning, filing in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil, complete all as specified and directed. |
| 98 | Removing surplus excaveted soil to a distance exc 250 Mtr and nexc 500 Mtr depositing where directed at a level n. exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 99 | M&L for 150 mm bore reinforced concrete pipes class N P-2, laid and jointed complete with collars layring over concrete bed for 150mm in PCC 1:3:6 type C-2 (using 40 mm graded stone aggregate) to drain pipes including packing under,haunching against the sides of pipes after they are laid and testedcomplete all as specified and directed. |
| 100 | M&L for PCC 1:4:8 type D-2 (using 40 mm graded stone aggregate) as in foundation bed of manhole, drains and steel post embeded etc all as specified and directed. |
| 101 | M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) as ub channels /benching of manhole, laid to shape and slope and surface finished even ans smooth using extra cement, complete including all form work complete all as specified and directed. |
| 102 | M&L for rendering 15 mm thick on fair faces of brick (internal faces of manholes ST in CM 1:4 mixed with water proofing compouind where ever required in proportion as per manufacturer\"s instructions, including finishing the surfaces even & smooth without using extra cement complete all as specified and directed. |
| 103 | Supply only integral water proofing compound (powder)complete all as specified and directed. |
| 104 | M&L for providingpre cast reinforced cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as n precast RCC manhole/septic tanks covers including all form work and setting in CM 1:4 complete all as specified and directed. |
| 105 | M&L for Brickwork withsub class \"B\" old size brick in CM 1:6 straight or curved on plan exc 6 m mean radius complete all as specified and directed. |
| 106 | M&L for PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregrate) mass concrete as in coping, kerb complete all as specified and directed |
| 107 | Demolition and breaking up drain pipes (salt glazed ware, AC or Reinforced) 150mm dia set in cement mortar complete all as specified and directed |
| 108 | Cutting into existing manholes for connecting new drains making good to open and rendering, cutting out existing benching for and forming branch channel 1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1,smooth finished and reforming benching complete all as specified and directed |
| 109 | Taking down carefully aluminium point wiring any type including battens if any except for ceiling or where not feasible for light/ fan//bell/socket or power and including unscrewing from board, fitting and fixture such as switches,socket, ceiling rose,lamp holder,pendants, bracket and regulator etc and removing material from site including making good disturbed surface to match with the existing surface complete all as specified. |
| 110 | Taking down carefully UNSV main switch DBs of any description of an size in any position complete all as specified and directed |
| 111 | Taking down submain wiring including all accessories complete all as specified and directed. |
| 112 | Material and labour for point wiring for One light / fan/ exhaust fan point controlled by one switchwith single core FRLS 1100 volt grade cable with multi stranded copper conductor of size 1.5 Sq mm (Nominal area) drawn through and including non metallic rigid PVC conduit medium duty ISI markednot less than 20mm dia, with all conduit accessories, screws (concealed conduit wiring in walls and casing capping on ceiling or roof) including metal box suitable for modular fittings and covered withmodular plateand cover of suitable size with new brass screwsfor mounting switch sockets and regulators and drawing continuous earth wire with and including PVC sheathed 1100 Volts grade cable with strandedcopper conductor of size 1.5 Sq mm (Nominal area) and connected to main earth dolly complete all as specified for:- |
| 113 | (b) One 5 pin 5 Amp switch socket out let point on an independent board.complete all as specified and directed |
| 114 | (c) One 5 pin 5 Amp socket out let point controlled by one switch on same board. complete all as specified and directed |
| 115 | (d) One buzzer/ bell point controlled by one push button on the same board with other switches or independent complete all as specified and directed |
| 116 | All as per item 112 here in before but for one 15 Amp 6 Pin switch socket out let independent with2.5 Sqmm FRLS (Nominal Area) PVC unsheathed copper conductor single core multistrandedincl 2.5 sq mm FRLS PVC copper conductor single core used as earth continuity conductoe complete all as specified.complete all as specified. |
| 117 | S & F Modular switch one way 10 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 118 | S & F Modular switch one way 16 A, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 119 | S & FModular bell push 6 Amp, 1 Module complete all as specified and directed by the Engr-in-Charge. |
| 120 | S & FModular Socket 6 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 121 | S & FModular Socket 6/16 Amp, 2/3 Pin combined 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 122 | S & FModular fan regulator Step up type, 120 Watt, 2 Module complete all as specified and directed by the Engr-in-Charge. |
| 123 | Supply and Fixing ceiling rose PVC/ Poly carbonate,Isolated body, threeterminal AC 230 volts complete all as specified and directed. |
| 124 | M & L for replacement oflamp holder, PVC / Poly carbonate, insulated bodymodular type with back plate batten/angle type for batten fittings complete all as specified and & directed |
| 125 | S&F in replacement LED mirror light fitting of 1 x 10 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 126 | S&F in replacement LED mirror light fitting of 1 x 20 wattLED batten with aluminium housing with all accessories prewired suitable for wall /surface mounting complete with connection all as specified and directed. |
| 127 | S&F indoor decorative LED City-3 light fitting suitable for & including single 12 Watt LED lamp with polycarbonate body with upper globe complete all as specified and directed. |
| 128 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires includinguding LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 129 | Supply and Fix LED lamp 12 Watt, 230 V , AC integrated circuit complete all as specified and directed. |
| 130 | Supply and fixing Buzzer, Ding Dong AC. 230 volts,single pole complete all as specified and directed |
| 131 | Supply & Fixing security light fitting, LED type, 25 Watt, 6000 K, pressure die cast housing with prismatic polycarbonate diffuser & indvl LEDs as light source withintegrated electronic driver complete with M&L GI pipe mounting bracket of size 25/32 mm dia and 1.20 m long fixed to wall with andincluding nut, bolts and GI clamps of size 50 x 6 mm as required including two coats of synthetic enameled paint over a coat of primer and making connection with three core 23/.0076 rubber insulated copper cable from ceiling rose to connector of street light complete all as specified and directed. |
| 132 | M&L for sub main wiring with two single core 6.0 Sqmm (FRLS)copper conductor PVC unsheathed cable medium grade including PVC conduit (appropriate size) concealed in wall for sub main connection including 6.0 Sqmm (FRLS) PVC insulated multistranded unsheathed copper conductor used as a earth wire to common earth and connection to earth dolly all as specified. ( Note :-Two runs of 6.0 sqmm (FRLS) and one run of 6.0 sqmm (FRLS) copper conductor shall be measured as one unit length.) |
| 133 | Taking down carefully ceiling fan from existing siteand dopositedin MES yard for BER in coming BOOall as directed by Engineer-in-Charge. |
| 134 | Supply and fixing ceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 135 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m complete all as specified and directed. |
| 136 | M & L for Hole cutting in wall for fixing of exhaust fan of size 300 mm and good the disturbed surfacres of wallby using putty and match with existing colour of wall complete all as specified and directed.Note:Cost of repairing work and material ( cement and sand) included in quoted rate. |
| 137 | S&F MCB SPN 40 Amp 240 volt complete all as specified and directed by the Engr-in-Charge. |
| 138 | S&F MCB single pole 6 to 32 Amp 240 Volt \"B\" curve 10 KA complete all as specified and directed by the Engr-in-Charge. |
| 139 | Supply and fix flush sheet metal enclosure SPN DB 12 way with double door IP-42 protection detachable gland plates, flush mounting for MCB fitted with bus bar , earth bar and neutral linkscomplete including taking down old unsv all as specified and directed. |
| 140 | Supply and fix TPN DB -TPN DB 4 way with provn and including of MCCB 63 Amps , 415 Volt, 3 Phase, 4 wire AC 50 Hz having aluminium Bas Barphase and the neutral insulated with PVC sleeves, connected with appropriate size copper thimbles. |
| 141 | Supply and fixing 415V 10KA \"B\" curve miniature circuit breaker (MCB) of TPN/FP 40 to 100 AMPcurrent carrying capacity in the DB complete with connection testing and commissioning complete all as specified and directed by the Engr-in-Charge. |
| 142 | Material & Labour for earthing complete including taking out old unsv and replacewith galvanised steel earth plate 600x600x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level ) with top edge of the plate not less than 1.5 meters below normal ground level, surrounded with adequate quantity of charcoal dust mixed with salt to a packed thickness of 15 cm all around the plate using 4 mm dia GI wire as earth wire electrode moulded and rivetted to earth plate at one end and connected to main switch/ control switches of buildings at another end, GI earth wire encased inand including 15 mm dia GI \"light grade\" pipe from upper end of earth plate upto main switch board of building including 20 dia bore GI pipe \"light grade\" as water pipe from earth chamber andincluding excavation and earth work, PCC 1:3:6 typeC1 chamber and MS angle iron frame 40x40x3mm and RCC cover 40mm thick (1:2:4) type B1 using 20mm graded stone aggregate reinforced complete all as specified and directed |
