|
| 1 | Excavation in trenches not exc 1.5mtr wide and n.exc. 1.50m deep as in foundation of drain n.exc. 10 sqm on plan and getting out in soft/loose soil complete all as specified and directed.. |
| 2 | Returning, filling in, including spreading, levelling, watering and well ramming in layers,soilnot exc 25 cm.complete as specified and directed. |
| 3 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-charge. |
| 4 | M&L for PCC 1:3:6 type B-2 (using 40 mm graded stone aggregates)as in foundation, fillings and mass concrete complete all as specified and directed. |
| 5 | Demolition of reinforced cement concretein any position complete all as specified and directed by Engr-in-charge. |
| 6 | M & L RCC M 25 using 20 mm graded stone aggregate as in chajja and similar works complete all as specified and directed. |
| 7 | M & L RCC M 25 using 20 mm graded stone aggregate as in lintel band and similar works complete all as specified and directed. |
| 8 | Use and waste ofFormwork to sides and soffits of floor or roof beams, beam haunchings, girders, ressummers, lintels, cantilevers, shelves ,lintal band,chhajja including sup- ports, overhangs,etc. also splays between floors and beams, etc. complete all as specified and directed. |
| 9 | S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 10 | S & F TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for stirrups,spacers & binders binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 11 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed by the Engineer-in-Charge. |
| 12 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed. |
| 13 | M&L rendering 15 mm thick in cement mortar 1:4 mix with water proffing material @200 mg/L on fair faces of brick or concretesurfaces finished even and fair complete all as specified and as directed. Note:- waterproofing compound measured separatly. |
| 14 | Supply only water proofing compound complete all as specified and directed. |
| 15 | M&L Rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete for fair and even Surfaces.complete all as specified. |
| 16 | M&L preparation of new surface and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engr-in-Charge |
| 17 | M&L preparation of new surface and applying two coat oil bound distemperover a coat of primer complete all as specified and as directed by Engr-in-Charge |
| 18 | M&L applying 1mm thick wall care putty on walls and after drying the surfaces sand the putty smooth before painting complete all as specified and directed. |
| 19 | M&Lbroken stone hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface, complete as specified and directed. |
| 20 | M&L 100mm thick PCC 1:3:6type B-2 using 40mm graded coarse aggt in sub base laid in alternate bays and joint filled with bituminious mastic and like complete all as specified and directed. |
| 21 | M&L 100mm thick PCC 1:2:4 type B-1 using 20mm graded coarse aggt in floor laid in alternate bays and joint filled with bituminious mastic and like complete all as specified and directed. |
| 22 | M&L 40mm thick PCC 1:2:4type B-0 using 12.50mm graded coarse aggt with water proofing compound in DPC and like complete all as specified and directed.Note:- WPC masured separataly. |
| 23 | M&L 75mm thick PCC 1:2:4type B-1 using 20mm graded coarse aggt in plinth protection laid in alternate bays and joint filled with bituminious mastic and likeincluding neccesry form work complete all as specified and directed. |
| 24 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description not exceeding 1.5 Sqm each completeall as specified and directed |
| 25 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description exceeding 1.5 Sqm but not exceeding 4 Sqm each completeall as specified and directed. |
| 26 | M&L for PCC 1:2:4 type B-1using 20 mm graded aggregate as in concrete for fixing holdfasts for bed blocks etc complete all as specified and directed |
| 27 | Dismantling MS work of any description not otherwise provided for complete all as specified and directed. |
| 28 | S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar work all as specified and directed . |
| 29 | S & F for pressed steel door frames of size 105 x 60mm for doors with one or more rebate including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and directed . |
| 30 | M & L for PCC 1:3:6 type C-0using 12.5 mm graded stone aggregate as in filling of hollow pressed steel frame etc complete all as specified and directed . |
| 31 | S & F30mm thick flush door shutters solid core construction, with block board core and plywood face panels, commercial type on both sidefixedto chowkhat complete all as specified and directed . |
| 32 | S & F powder coated (thickness of powder coating shall not be less than 50 micron) aluminium frame for doors, widows, ventilators with one or more tracks or rebates including joining cleats for fixing etc complete all as specified and directed . |
| 33 | S & F powder coated (thickness of powder coating shall not be less than 50 micron) anodised aluminium window and ventilator shutters, side hung type/top hung/sliding without sash bars/with sash bar, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed . |
| 34 | S&F stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 35 | M & L for 4mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each panecomplete all as specified and directed. |
| 36 | S&F extruded aluminium alloy handles, anodized 100 mm size complete all as specified and directed. |
| 37 | S&F aluminium anodised 250mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type complete all as specified and directed. |
| 38 | S&F Aluminum Barrel tower bolt 150mm complete all as specified and directed. |
| 39 | Dismantling wrought iron or mild steel work of any descriptioncomplete all as specified and directed. |
| 40 | M & L for roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. compete all as specefied and directed by E-in-Charge. (Fe- 410W Grade-E-250 quality A) complete all as specified and directed.. |
| 41 | M&L in applying two coats of synthetic enamel paints over a coat of red oxideprimer on new steel surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 42 | M&L in applying two coats of synthetic enamel paints over a coat of pink primer on new wodden surfaces over 10 cm width or girth including preparatinon of surfaces complete all as specified and directed by the Engineer-in-Charge. |
| 43 | Dismantling of AC (corrugated/semi corrugated) sheet/PGI/CGI in roof covering including ridges all as specified and directed by Eng-in-Charge. |
| 44 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface, all as specified and directed. |
| 45 | S&F Pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and making good to disturb surface,complete all as specified and directed. |
| 46 | Dismantling wall and ceiling boards fiber,pulp,insulation etc any thickness including Grid, cover fillets etc complete all as specified and directed. |
| 47 | S & F grid false ceiling in GI system powder coated prelude main runner section 38 x 24 x 0.40mm, cross \"T\" 28 x 24 x 0.40mm, wall angle 24 x 24 x 0.40mm and including providing and fixing 4mm thick non asbestos fibre fire resistantcement building board/designer E-Board with all finishes size 595 x 595mm fixed in ceiling frame work with all necessary hanging washers, expansion holding fasteners,including 3mm thicksuspension wire as requiredetc for securing framework to ceiling wherever required complete all as specified and directed. |
| 48 | M&L providing chequered cement concrete coloured tiles glossy finish 25cm x 25cm x 22 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigmentlaid over and includingscreed bed or bedding layer 20 mm thick in CM 1:4 as in floors complete all as specified and directed. |
| 49 | M&L for providing100 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate , finished even and fair etc complete all as specified and directed by Engr-in-charge. |
| 50 | M & L floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 140 mm complete all as specified and directed. |
| 51 | S&F in repair stainless steelcurtain rod 25 mm dia incl. brackets and curtain rod holders of suitable size at ends etc complete all as specified and directed |
| 52 | Taking down carefully (aluminium) point wiring complete of any type (batten/surface conduit or concealed) for light point, fan point, bell point socket point or power point complete with all fitting such as switches, sockets pendants, ceiling rose, round block etc complete removing material to store of keeping in safe custody or for taking creditand making good disturbed surfaces of wall, floor or ceiling with plaster of tiles or roof treatment etc and finishing the surfaces with distemper/white washing/colour washing to match with the existing surface complete all as specified and directed. |
| 53 | Material and labour for point wiring includingconcealed in surface of structure/ truss etc rigid non-metallic PVC conduit pipe medium grade, ISI marked heavy duty in size 20 MM diawith 1.5 Sqmm FRLS insulated unsheathed, multi stranded copper conductor cable, single core 1100 volt grade with flush cast iron/ pressed steel terminal boxes of suitable size for fixingsuch as switches, sockets and fan regulators etc and fixing with brass screws/cup washer and including FRLS insulated & unsheathed 1100 volts grade cable with multi stranded copper conductor of size 1.5 Sqmm as continous earth wire complete including making good the disturbed surfaces complete all as specified and directed. for the following:- Note:-Quoted rate shall be included cost of cheasesing,cutting, plastering and colouring etc to surface of wall / beam/ roof etc as site requiredmatchingwith existing surface and blank plate to be cover up to extra gap in mountingboard in given module /make / model etc. |
| 54 | (a) All as as per item No 53 above but One light point/Fancontrolled by one way indepdentswitch multi stranded copper conductor FRLS of size 1.5 Sqmm in PVC Conduit. |
| 55 | (b) All as as per item No 53 above butOne 3 pin 5 Amps socket out let point on same board controlled by one switch multi stranded copper conductor FRLS of size 1.5 Sqmm in PVC Conduit. |
| 56 | (c) All as as per item No 53 above but One 3 pin 5 Amps socket out let point on independent board controlled by one switch multi stranded copper conductor FRLS of size 1.5 Sqmm in PVC Conduit. |
| 57 | (d)All as as per item No 53 above but All as per above item No-2 here in before point wiring for 15 Amps socket using 2.5 Sqmm copper cable for phase and neutrl and 2.5 Sqmm as earth wire in PVC Conduit complete. |
| 58 | Supply and fixing modular switch , one way 6 Amps 1 module complete all as specified and directed. |
| 59 | Supply and fixing modular switch, one way 16 Amps 1 module complete all as specified and directed. |
| 60 | Supply and fixingmodular socket 6 A, 2/3 pin combined 2 modulecomplete all as specified and directed. |
| 61 | Supply and fixingmodular socket 16 A, 3/5 pin combined 2 module complete all as specified and directed. |
| 62 | Supply and fixing ceiling rose surface type 65 MM x 50 MM, 2 to 3 terminal complete all as specified and directed. |
| 63 | Supply and fixing of modular fan regulator step type 120W 2 modulecomplete all as specified and directed. |
| 64 | Supply and fixing in replacement white cover plate with frame 3 module complete all as specified and directed. |
| 65 | Supply and fixing in replacement white cover plate with frame 4 module complete all as specified and directed. |
| 66 | Supply and fixing in replacementwhite cover plate with frame 8 module complete all as specified and directed. |
| 67 | Supply and fixing LED Tube light fitting 20 watt 4 feet with PC batten, compact appearance suitable for Retrofit LED Tube 20 watt including LED tube rod 20 watt self ballasted retrofit lamps with thermoplastic body 270 degree wide distribution CCT 6500 K including fitting fixed on wall/ceiling and connecting up complete with 3 core flexible cable white of size 23/0.0076 including taking down old unsv tube light fitting and making necessary connection complete all as specified and directed by Engr-in-Charge. |
| 68 | Supply and fixing in replacement exhaust fan 450 mm sweep steel body heavy duty with louver mounting bracket ISI marked 4 star rated energy saving less noise capacitor type incl making hole in brick wallplastering colour coading and all site requiredwork for disturbed surfacematching with existing and making electric connection using three core copper cable drawn through in PVC conduit pipe complete all as specified and directed. Note:- OLd fans should be deposited by contractor to MES store yard. |
| 69 | Supply and fixing in replacement ceiling fan in size 1200 MM sweepwhite colourBEE 5 star rated copper wound energy saving with set of sweep/ extension rod / \"U\" clampand other accessories single phase 50 HzsMin air delivery 210 CFM with service value 6.00 BEE and Brush less direct current motor (BLDC) incl making electric connection using three core copper cable drawn through in PVC flexible conduit pipecomplete all as specified and directed.Note : Quoted rated shall be included the cost of GI clamp made out strip in size 32 x6 MM with nut bolts washer etc all, OLd fans should be deposited by contractor to MES store yard |
| 70 | Supply & Fixing in replacement 35 W bldg security light LED fitting Warm/day cool as required, IP 65 IK 07Aluminium Pressure Die Casting protection with high powerLED completewith including provn of flexible three core cablefrom ceiling rose to fitting terminal for making electrical connection, fixing the fitting on wall including all necessary fixing accessories with nuts, boltand all Earth work completecomplete all as specified and as directed . |
| 71 | Material and labour for sub main wiring with two runs of single core PVC FRLS IS-694 cable with unsheathed multi-stranded copper conductor of size 06 Sqmm and drawing through in concelead rigid non metallic PVC conduit pipe medium grade heavy duty in suitable size with all necessary fittings including one run of FRLS insulated unsheathed stranded copper conductor cable of size 06 Sqmm as earth wire (green in colour) and connected to common earth dolly complete including taking down of old unserviceable sub main wiring including taking out to old unsv sub main wiring with accessories complete all as specified and as directed. Note : (i) Two run of 06 sqmmwith one run of earth with one run PVC conduit pipe shall be measured agaist one unit. (ii)Cost of cutting /chasing/ plastering /colouring etc as site shall be included matching to disturbed surface all as existed. |
| 72 | Supply and fix sheet metal enclosure for MCB distribution board SPN, double door, 8 way with 200 Amp rated bus bar 230 Volts including taking down to old unsv DBs in any make/ model/ way etc with accessoriescomplete all as specified and directed. |
| 73 | Supply and fixing MCB , SPN, 2 pole 220 volts , 40 Amps , \"C\" Curve 10 KA complete all as specified and directed. |
| 74 | Supply and fixing 240V, 10 KA \"B\" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed. |
| 75 | Excavation in treanches soft/loosesoil not exceeding 1.5 mtr wide and not exceeding 1.5mtr in depth for foundation etc or for shaft well, cesspits, manholes, pireholes etc not exc 10 Sqm on plan and getting out in soft/loose soil, complete all as specified and directed. |
| 76 | Returning & filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 CM thick in soft/ loose soil, complete all as specified and directed. |
| 77 | Removing excavated material not exceeding 50mtr and deposting where directed at a level not exceeding 1.5mtr above the starting point complete all as specified and directed. |
| 78 | M&L for sand cushioning (dry sand) to under ground cable for cable protection with layer of 8 cm deep before laying the cable and 15 cm depth after laying the cable, complete all as specified and directed. Note :Punned thickness of sand layers shall be measured and paid contractor. |
| 79 | M&L for brick, subclass \"B\" well burnt, laid dry flat in trenches for protection of cable over LT/HT cable, complete all as specified and directed. |
| 80 | Supply laid in trences/ fixing with pole/ connecting, thembling, glandingofXLPE insulated under ground screened PVC badded, galvanised steel strip or wire armoured, electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2 core (earhted) complete all as specified and directed. |
| 81 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix \"B\" to Particular specifications as approved by AGE (I) AF manauri |
