|
| 1 | Surface excavation n.exc 30cm deep and averaging 15cm deep and getting out soft/loose soil, including removal of excavated earth upto a distance 500m from starting pointcomplete all as specified and directed by Engr-in-Charge. |
| 2 | Excavation in trenches n.exc 1.5 m wide and n.exc 1.5 m deep for foundation etc getting out in soft/loose soil complete all as specified and directed by Engineer-in-charge |
| 3 | Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc. complete all as specified and as directed. |
| 4 | Dismantling asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including wind tie complete all as specified and as directed. |
| 5 | Dismantling wall and ceiling boards’ fiber, pulp, insulations etc or insulation boards any thickness including cover fillets complete all as specified and as directed. |
| 6 | M&L for rendering 15mm thick on brick wall or concrete surface in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified. |
| 7 | M&L for 15mm thick Rendering in CM 1:4 on brick work or concrete surfaces finished even and smooth etc complete all as specified and directed. |
| 8 | M&L for 15mm thick Rendering on fair faces of walls of brick work or concrete surfaces in cement mortar 1:4 with water proofing compound complete all as specified and as directed.Note: water proofing compound shall be measured and paid seprately. |
| 9 | M&L for 10mm thick rendering in CM 1:3 on brick work or concrete surfaces finished even and smooth w/o using extra cement in Ceiling etc complete all as specified and directed. |
| 10 | M&L for preparation of new plastered surfaces of ceiling and applyingthree coats white wash on ceiling complete all as specified and directed by Engr-in-Charge |
| 11 | M&L applying two coats of cement base paint on newly plastered or unplastered wall surface over a coat of cement primer including preparation ofsurfaces, complete all as specified and as directed. |
| 12 | M&L for 12 mm thick rendering on brick work or concrete surfaces in cement mortar 1:6 complete all as specified and as directed. |
| 13 | M&L for preparation of new plastered surfaces of wall and applying two coats of whitewash onwalls complete all as specified and directed by Engr-in-Charge |
| 14 | M&L for preparation of new plastered surfaces of walls and applying two coat of Birla white putty to obtain the true line to achieve smooth surface and applying two coats of oil bound distermper complete all as specified and directed. |
| 15 | M&L for preparation of new plastered surfaces of walls and applying two coats of oil bound distermper over a coat birla 2.00mm thick white putty complete all as specified and directed. |
| 16 | M&L for preparation of newplastered or unplastered decorated surfaces of walls or cornicsapplying two coat of exterior emuslion paint and including 2mm thick wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed. Note:- Exterior emulsion paint to be done by Roller. |
| 17 | M&L for preparation of old plastered surfaces of walls and applying one coats of oil bound distermper over one coat of birla white putty 2.00mm thick complete all as specified and directed. |
| 18 | M&L for preparation of old plastered or unplastered decorated surfaces of walls or cornicsby complete removeal of existing treatment by applying water and scrappingof entire thickness of exsting treatment with using steel scraper and thereafter applying two coat of exterior emuslion paint and including 2mm thick wall care putty to achieve smooth finish over a coat of appropriate primer complete all as specified and directed. Note:- Exterior emulsion paint to be done by Roller. |
| 19 | S&F in position suspended false ceiling system using E-gridsuspended ceiling grid system . The size of grid shall be 600x600mm with GI frame work main runner 38x24mm cross tee 25x24mm and wall angle 24mmx24mm using 8mm thick ceiling panel laminated wth PVC film on front face and foil back available in due drop texture as per IS- 2095 Part-I 1996 fixed in the grid of E grid suspended ceiling Grid system duly suspended by 4mm dig GI bar hangers from the purlins of the roof with butter fly clipsall as specified. |
| 20 | S&F of pre painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified. |
| 21 | S&F of pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws all as specified and as directed by Engineer-in-Charge. |
| 22 | Dismantling floor or wall tiles including cement mortar bedding, removing serviceable tiles to store and rubbish off the premises complete all as specified and directed by Engineer - in – Charge. |
| 23 | M&L for granite 20mm thick (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified |
| 24 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations. |
| 25 | M&L for glazed ceramic coloured tiles in vertical surfaces 450x300x7mm thick setand jointed in neat cement slurry pointed in white or colour cement to match the colour,with 10 mm thick cement screed bed(1:4) complete all as specified and directed by Eng in Charge |
| 26 | M&L for vitrified ceramic tiles light shade tiles 9-10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqmin vertical surface such as skirting dados and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 10 mm thick cement rendering in CM (1:4) complete all as specified and directed by Eng in Charge |
| 27 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular)area of each tile exceeding 0.11sqm but n.exc 0.18 Sqm in floor set and jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement rendering in CM (1:6)complete all as specified and directed by Engr-in-Charge |
| 28 | M&L for vitrified ceramic tiles light shade tiles 9-10 mm thick (square/rectangular) polished, area of each tile not exc 0.36 Sqmin floor setand jointed in neat cement slurry and pointed in white or colour cement to match the tiles, with 15 mm thick cement rendering in CM (1:6)complete all as specified and directed by Eng in Charge |
| 29 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed. |
| 30 | M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius with old size bricks built in cement mortar 1:4 complete all as specified and as directed . |
| 31 | M&L for brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:4 complete all as directed. |
| 32 | M&L for form work to soffits of suspended slabs such as roof slab floor slab not exc 200mm thick with rough finished surface of concrete. |
| 33 | M&L for reinforced cement concrete Nominal mix Type B-1 (1:2:4) using (20mm graded aggregates) in Slabs supported on walls, beams and columns in floors, roofs, landings, Chajjas, balconies, canopies, deck slabs and in the shelves and the like complete all as specified. |
| 34 | M&L for formwork to edges of concrete surfaces flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide with rough finished surface of concrete complete all as specified and as directed by Engr-in-Charge. |
| 35 | M&L reinforced cement concrete Nominal mix Type B-1 (1:2:4) using(20mm graded aggregates) as in beams, cantilevers, bressummers and lintels over 1.5m span complete all as specified. |
| 36 | Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed |
| 37 | Use and waste of formwork to chajjas and similar items including edges rough finished complete all as specified and directed. |
| 38 | M&L for TMT bars 10mm dia and over cut to length bent to shape required, including cranking, bending hooking etc & binding with mild steel binding steel wire (annealed) not less than 0.9mm dia. |
| 39 | - ditto - all as per item No 38 here in before but 6mm dia to 8 mm dia as in stirrups. |
| 40 | S&F rolled sections Fe 410-W(Gde-E-250) Quality -A as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. complete all as specified and directed by Engr-in-Charge. |
| 41 | M&L RCC 1:2:4 type B-0 using 12.5 mm graded crushed stone aggregate as in chajjas , manhole cover , tank platform sink Platform etc. complete all as specified and directed by Engineer-in-charge. |
| 42 | M&L for providing precast cement concrete 1:2:4 type B-1 (using 20mm Graded stone aggregated) as in manhole cover slabsbrackets, etc. (of any section indicated), with plain fair faces, including necessary formwork complete all as specified and directed as by Engineer-in-charge |
| 43 | Taking down chowkhats or frames not exceeding 1.5 sqm each with shutters (without taking off shutters from the frames) and removing complete all as specified and directed. |
| 44 | Taking down chowkats or framed with shutter (with out taking off shutters from the frame) area exc 1.50 sqm but n. exc. 4sqm each complete all as specified and directed. |
| 45 | S&F of solid PVC door frame of size 50x47mm made out of5mm plain colour PVC sheet reinforced with MS square tube in opening complete all as specified and directed. |
| 46 | S&F of factory made solid PVC panel shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and a gap insert for top rail and bottom rail; paneling of plain colour PVC sheet to be fitted in the MS frame welded /sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cementas specified in SSR Part-II- 2004 SEC 8 CLAUSE 8b1 TO 8b 2.1complete all as specified and directed by EIC. |
| 47 | S&F of pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 125 x 60mm filling hollow frame complete all as specified and directed. |
| 48 | S&F ofpressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified, size of frame 105 x 60mm filling hollow frame complete all as specified and directed. |
| 49 | M&L forPCC 1:3:6 type C2 as in filling of chowkhats complete all as specified and directed by Engineer-in-charge. |
| 50 | S&F of factory made 2nd class hard wood Plain, framed, panelled shutters 35 mm thick(any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers: supplied and fitted to chowkatscomplete all as specified and directed by Engineer-in-charge. |
| 51 | S&F of factory made 2nd class, hard wood, 35mm thick glazed and skeleton shutters, open rebated and prepared to received glass, gauge, etc ( without sash bars) edges of framing plain, chambered or rounded, fitted with cut and mitred beads for securing glass , etc but difided into squares with plain chamfered or rounded mirted and rebated sash bars any numbers sizes of members of shutters as specified and directed by Engineer-in -Charge. |
| 52 | S&F of flush shutters 30 mm thick, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed by Eng-in-charge. |
| 53 | S&F of alumunium hinges for PVC door shutter, size of hinges in 100mm |
| 54 | S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 200mm |
| 55 | S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm for PVC door |
| 56 | S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm long. |
| 57 | S&F of aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed, length of bolt in 250mm complete all as specified and directed. |
| 58 | M&L for preparation of new wooden surface exceeding 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 59 | M&L for preparation of old steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge. |
| 60 | M&L for preparation of new steel surfaces of any description over 10cm girth or width not otherwise described and applying two coat of synthetic enamel paint over red oxide primer all as specified and directed by Engineer-in-Charge. |
| 61 | Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leafconsisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullionof EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement (h) including MS gills shall be of 12mm dia MS square as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. |
| 62 | S&F ofanodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified |
| 63 | S&F of anodised aluminium window andventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified |
| 64 | - ditto - all as per description of serial item No 63 here-in-before but comprising of gauged shutters |
| 65 | Supply and fix steel ventilators fixed type with glazing bars etc complete all as specified and directed by EIC. |
| 66 | S&F 4.00mm thick sheet glass in repair, ordinary quality in squares n exc 0.5 sqm each pane and glazing with oil puttycomplete all as specified and directed by Engineer-in-charge. |
| 67 | S&F 4.00mm thick figured glass, pinhead type in squares n exc 0.5 sqm each pane and glazing with oil puttyall as specified. |
| 68 | S/F stainless steel wire cloth 0.56mm nominal dia of wire and avarage width of aperture 1.00mm and fixed with tinned tacks/screwswith bolts incl leaping wooden complete all as specified and directed. |
| 69 | S/F 300mm MS ordinary rat rail rod pattern helical springs including roller and roller plate complete all as speicified complete all as specified and directed. |
| 70 | Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring overall length of cover plate 140mm complete all as specified and directed. |
| 71 | Mild steel curtain rods, bright finish/wooden finish 25mm dia heavy duty superior quality with brackets, rings (15 cmc/c), knobs etc as approved by GE complete all as specified and directed. |
| 72 | Taking up or down steel tubing 15mm bore pipe including cleaning for re-fixing and removing from the site complete all specified and directed. |
| 73 | 15mm bore GI tubing medium grade with and including all fittings and cutting, threading both ends to required size, and fixed to walls, ceilings or laid under floors, making good all the disturbed portions complete all as specified and as directed. |
| 74 | Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and makinggood, cutting not exceeding 10cm girth in brick walls complete all as specified and directed. |
| 75 | Taking down GI tubing & connection 20mm dia laid in floor / trenches or fixed to walls complete all as directed by Engineer-in-Charge. |
| 76 | S&F GI tubing 20mm dia medium grade galvanized with all fittings & fixed complete to walls & ceiling or laid in floors. |
| 77 | S&F wash hand basin mixer 15 mm Brass CPfor mixing hot and cold water with all necessary fittings screwed down for iron pipe and fixed complete. |
| 78 | S&F wall mixer 15 mm Brass CPfor mixing hot and cold water for bathroom including shower connection with all necessary fittings , screwed down for iron pipe and fixed complete. |
| 79 | S&F 15 mm bore CP bib taps fancy type cast copper alloy with crutch or butter fly handle screwed down for iron pipe or for brass ferrule and fixed complete. |
| 80 | S&F in repairs 15mm dia stop/angle valve, CP cast copper alloy with crutch or butterfly handle. Screwed down high pressure, screwed both ends for iron pipe and fixed complete all as directed |
| 81 | S&F PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete. |
| 82 | S&F brass Choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete. |
| 83 | S & F PTMT Corner shelf with and including chromium plated brass screws and wooden/plastic cleats (Minimum weight 300 gms) |
| 84 | S&F PVC(SWR) floor trap with CP grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 85 | S&F vitreous china wash down water closet pan (Pedestal pattern) of white colour including plastic water closet seat back closed pattern with flat bottom (with MS or CP hinging device) and fixing bolts, P or S trap, jet spray necessary inlet and outlet connections including syphonic action type low level PVC flushing cistern of 10 lit capacitymake white in colour and PVC flush pipe 32mm dia complete. |
| 86 | S&F 600x450 mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6 mm thick commercial ply or AC building board, fitted to wooden plug with CP screws complete all as specified and directed. |
| 87 | Supply and fix vitreous chinabowl urinals flat back,half stallcomplete including providing & fixing plugs, bedding urinal against wall in CM (1:2) securing urinal to plugs with & including 60cm long brass screws, jointing around urinal back in cement paste includingflush pipe, grating and union for discharge pipe as specified. |
| 88 | S&F 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 89 | S&F in repairs PVC(SWR) floor trap with grating and diameter of outlet 75mm including jointing to waste pipe fixed with solvent cement complete all as specified and directed. |
| 90 | S&F in repairs fancy type chromium plated stop valves with long shank and cup (concealed type) cast copper alloy screweddown high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed for bore fof size 15mm complete all as specified and directed. |
| 91 | S&F concealed 15mm dia of pipe stopvalves, chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for Unions and fixed . |
| 92 | Supply & fix 15mm Angle valve fancy typeof CP cast copper alloy , with capstan heads, chromium plated, screwed down high pressure, screwed for iron pipe and fixed |
| 93 | Supply and fix in repairsfor vitreous china ware wash basin white, flat back size 550 X 400mm including 15mm dia pillar tap chromium plated, CP waste coupling, waste fittings, union and waste pipe 32mm dia or required length and all necessary inlet, out let connections complete complete all as specified and directed. |
| 94 | S&F in repairs shower rose 125mm with cp arm of chromium plated any colour or fixing with 15mm pipe (minimum weight 40gm) complete all as specified and directed. |
| 95 | S&F kitchen sink with drain board made of stainless steel 1mm thick sheet with plugs, washers and wastes including bedding in cement mortar including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm and bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 96 | S&F utensil rack stainless steel of size 750x600x250 mm fixed on walls with screws as specified and directed. |
| 97 | S&F soap dish chromium plated heavy duty complete all as specified and directed. |
| 98 | S&F 75 mm UPVC pipes in repair single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge. |
| 99 | S&F 75 mm UPVC pipes in repair single socketed in any length laid in floor complete all as directed by Engineer-in-Charge. |
| 100 | S&F 75 mm UPVC bendcomplete all as directed by Engineer-in-Charge. |
| 101 | S&F 75 UPVCjunction single,(single T)equal or unequal complete all as directed by Engineer-in-Charge. |
| 102 | S&F 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as directed by Engineer-in-Charge. |
| 103 | S&F 110 mm UPVCbend with complete all as directed by Engineer-in-Charge. |
| 104 | S&F 110 UPVCjunction single,(single T) equal or unequal complete all as directed by Engineer-in-Charge. |
| 105 | S&F 110mm UPVC vent cowl. |
| 106 | S & F PVC (SWR) gully trap 125/110 mm setting and jointing with solvent , cement |
| 107 | Supply and fixing 100 mm bore stack clamps out of 50mm by 5mm flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof fornominal bore. |
| 108 | Dismantiling water tank PVC 500 Ltrs and removing from site |
| 109 | S&F rotational moulded polythelene water storage tanks cylindircal water tankfor hoisted and fixed in postion of 500 ltrs capcity incl fittings and as directed by Engr-in-Charge |
| 110 | S&F gunmetal globe and gate valve with iron welded hand secrewed both and for iron pipe 20mm fixed in repairs |
| 111 | S& F in repairs Ball valves 20mm high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball screwed for iron pipe and fixed. (Minimum weight 15mm-142gms/ 20mm-210 gms./25mm-455gms/ 40mm - 690 gms) |
| 112 | S&F PVC cupboard frame of size 75mm x 40mm with wall thickness of 5mm made out of extruded 5mm thick Prelam PVC sheet reinforced with 15mm x 15mm M.S. square tubes of 19 gauge thickness throughout the frame and mitre cut at two corners and jointed with 2 nos. of 150mm long brackets of 10mm x 10mm M S square tubes. The door frame shall be fixed to the wall using 65/100mm long MS screws through the frame by using PVC fasteners complete all as specified and directed |
| 113 | S&F factory made PVC cupboard shutter flush type of 25mm thickness consisting of panel of hollow PVC profile of 12mm x12mm inserted all around the hollow profile section and insert one 10mm x 10mm MS tube in the centre of this section and lipped with 10mm thick(5mm x 2) and 12mm wide on stiles and rails using solvent cement the inner panel shall be laminated with 5 mm thick termite proof waterprrof and fire retardent printed PVC sheet using solvent cement on both sides of panel. |
| 114 | S&F alumunium hinges for PVC door shutter,cupboardssize of hinges in 100mm |
| 115 | S&F of aluminium anodised, barrel tower bolts of extruded section and fixed, length of bolt in 150mm |
| 116 | S&F of extruded aluminium alloys handles frabicated type anodized of size 150mm long. |
| 117 | Supply & fix 40 mm dia cupboard knobs of brass duly polished,with nuts, screw and washer of mild steel bright finished complete all as specified. |
| 118 | M&L for magnetic type catch fixed with screws to door frame complete all as specified and directed by Engr-in-Charge |
| 119 | Demolition of cement concrete of any description and in any position not otherwise specially provided for complete all as specified and directed. |
| 120 | M&L for 75mm thick PCC 1:3:6 type C2 as in plinth protection finishing the surface even and smooth with out using extra cement complete all as specified and directed. |
| 121 | M&L for plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified. |
| 122 | M&L for 100mm thick Plain cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete or in sub base of floors complete all as specified and directed by Engr-in-Charge. |
| 123 | M&L for machine cut kota stone for flooring ,staircase 18-20mm thick laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including cutting and polishing bedded on 15mm thick bedding layer in CM 1:6 as specified and directed by Eng-in-Charge. |
| 124 | M&L for 75mm th PCC 1:4:8 type D-2 as in sub base, Floors, Paving finished even and fair complete all as specified. |
| 125 | M&L for 25mm thk PCC 1:2:4 type B-1 using20mm graded agg as wearing coat for layingfloor finishes, finished fair to receive tiles. |
| 126 | M&L for sand filing under floors or in foundations including watering and consolidation |
| 127 | M&L for machine pressed precast concrete interlocking paver block any shape and size confirming to IS-15658 - 2006 of 80mm thick ness, M-40 grade with grey cemet and pigment over sand cushioning complete all as specified. |
| 128 | Supply only integral water proofing compound. |
| 129 | Supply only liquid water proofing compound. |
| 130 | Demolition and breaking up 300mm bore dia drain pipe (salt glazed ware, AC or reinforced cement concrete) set in cement mortar. |
| 131 | Cement concrete (1:3:6) type C2 using 40mm graded crushed stone aggregate as in bed of RCC NP-2 pipe 300mm bore including packing under and haunching against the sides of pipes after laying and testing complete all as specified |
| 132 | M&L for reinforced concrete 300 mm dia pipe class NP-2 laid & jointed complete with collars, complete all as specified and directed. |
| 133 | M&L for cement concrete (1:2:4) type B-1 using 20mm graded stone aggregate as in surface channel and benching for manholes and haunching around manholes frames includingnecessary form work and finishing exposed surfaces even and smooth without usingextra cement. |
| 134 | Soakage well excavation, in any type of soil, foundation in PCC 1:3:6, walls of honey combed masonry with top ring of M25 concrete including intercepting chamber and screen chamber made of Brick masonary in CM, RCC cover slab in M25/ SFRC cover, interconnecting pipes of RCC/DWC complete filled with brick bats of size 1.80m x 3.0m effective depth |
| 135 | M&L for 5 users on site LLDPE conventional Septic tank designed to carry sewage and sullage water, excavation in any type of soil, PCC 1:4:8 below foundation, Vent shaft, connection etc. complete |
| 136 | Excavation in post holes (or similar holes) each n exc 0.5 cum, getting out , returning filling in layers not exceeding 25cm including watering and ramming and removing surplus earth to a distance not exceeding 50 metre complete all as specified. |
| 137 | Plain cement concrete (1:2:4) type B-2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified. |
| 138 | S&F of roof trusses (framed),staging for water tanks, and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc.Fe-410(Gde-E250) complete all as specified and directed by Engr-in-Charge. |
| 139 | S&F for Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment conforming to Fe-410-W (Gde-E-250) quality B complete all as specified and directed by Engr-in-Charge. |
| 140 | Returning, filling in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick using excavated soil. |
| 141 | Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at a level not exceeding 1.5 metre above the starting point all as directed. |
| 142 | Taking down aluminium point wiring for light, fan, bell socket, power socket etc complete including fittings and fixtures removing from site and making good disturbed surfaces of walls, floors, etc complete all as directed by Engineer-in-Charge |
| 143 | Material and labour for point wiring complete with 1.5 Sqmm single core multistranded copper conductor PVC (FR) insulated cable in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.5 Sqmm insulated un-sheathed PVC insulated copper conductor common earth and connecting to earth dolly for :- |
| 144 | One light point controlled by one, one way switch |
| 145 | One fan point controlled by one, one way switch |
| 146 | One socket outlet 3 Pin, 5 Amp on independent board |
| 147 | One socket outlet 3 Pin, 5 Amp on same board. |
| 148 | One bell point controlled by one bell push |
| 149 | One light point controlled by one, two way switch |
| 150 | M&L for point wiring with 4.00 Sq mm single core multi-stranded copper conductor PVC (FR) insulated, unsheathed cable 1100 volt grade in PVC concealed conduit of size 19/20 mm (ISI Marked) including PVC accessories (concealed in wall and surface in ceiling complete including cutting chasing & making good to disturbed surface etc including pressed steel terminal boxes (sunk in wall) with 3 mm thick plastic laminated sheet top cover with 1.50 Sq mm single core, multi-stranded copper conductor, PVC insulated, unsheathed cable for common earth and connecting for earth dolly for 5 pin, 15 Amp socket outlet on Independent board. |
| 151 | S&Fswitch piano flush type single pole one way 5 Amp (ISI Marked) |
| 152 | S&F switch piano flush type single pole one way 15 Amp (ISI Marked) |
| 153 | S&F socket out let 2 in 1, 3 pin 5 Ampflush type (ISI Marked) |
| 154 | S&F socket out let 2 in 1, 3 pin 15 Amp flush type (ISI Marked ) |
| 155 | S&F switch piano flush type single pole two way 5 Amp. |
| 156 | S&F Bell push flush type single pole one way5 Amp |
| 157 | M&L for ceiling rose, surface Bakelite 65 x 17.50 mm of three terminals PVC/Polycarbonate,isolated body (ISI Marked) |
| 158 | Taking down old unserviceable flourescent tube light fitting 36/40 watt fluorescent tube light fittings direct to walls or roof as ordered and disconnecting electrically with the electrical system and all materials required for the same. The rates also include making good the same to match with the existing surface. |
| 159 | Supply, installation, testing and commissioning Supply and fixing LED lights fitting 1x 20W, 220V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed. Make: Crompton/ Bajaj/ Philips |
| 160 | Taking down old unserviceable wall mounting fitting & supply & fix decorative wall mounting type made up of polycarbonate rings, and glass shade with lamp holders, connectors block, 1 x 09 watt LED Bulb, glass fitted engineering plastic B22 D lamp holder with electrical copper contacts, set screws, polycarbonate diffuser in opal finish for soothing light effect, LED 09 watt etc complete with all accessories prewired and including connecting up with twin core twisted flexible copper conductor cable complete all as specified and directed. Cat part No LHDL03160099 |
| 161 | Taking down old unserviceable lamp holder and S&F lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings.including LED lamp 09 Watt. |
| 162 | Taking down old unserviceable bulkhead fitting & supply & fix LED light fitting 1x9 watt/1x10 watt bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge, |
| 163 | Supply and fix LED Bldg security light fitting 35 W housing made out of die cast aluminum alloy with toughed glass, IP 65/66 protection having clamp for mounting on wall working on 240 V AC 50 Hz, 20 watts including fixed on wall with 02 Nos MS clamps and bracket made of 40 mm dia light grade GI pipe bend to shape. complete all as specified and as directed. Make : Wipro/Havells/Bajaj. |
| 164 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) and connecting up and including provision of twisted three core PVC insulated flexible cord of 0.75 Sqmm copper conductor of required length from ceiling rose/connector to fan complete all as specified and directed. |
| 165 | S&F in replacement Exhaustfans of 230 Volt 300 mm sweep ventilator DB bouble ball bearing heavy duty motor, metal blade with protection steel bird guard and roubst complete including M&L for providing/cutting the round hole of required size in wall finishing the same supply and grounting the ragged bolts in wall, fixing the frame on the exhaust side (outer surface of the wall) and connecting with and including PVC insulated three core 23/.0076 copper cable rubber insulated from ceiling rose to exhaust fan motor and writing MES No. with black synthetic enamel paint 2.0 cm high complete all as specirfied and directed( Make-BAJAJ, HAVELLS, USHA or equivalent ) |
| 166 | Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300 mm sweep with, blades, and frame and louvers cutting of the holes in existing wall and making good the surfaces all as directed . |
| 167 | Taking down old unsv DB and supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge. |
| 168 | Taking down unserviceable MCB’s and supply & fix following type/rating MCB’s including necessary connection as under:- |
| 169 | S&F of MCB, 10 to 32 Amp, SP, 240 Volt . |
| 170 | S&F of MCB,25 to 32 to Amp, SPN, 240 Volt. |
| 171 | Supply and fixing factory made sheet metal enclosure double door distribution board class IP-43 with 200 Amp rated copper bus bar 240 volts 8 way single pole and neutral link complete all as directed by Engineer-in-Charge. |
| 172 | Taking down old unserviceable sub main wiring of any sizes and M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn PVC concealed conduit of size19/20 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductormulti-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engineer-in-Charge. Note : Three run of 6.00 Sqmm cableand one run of PVC Conduit shall be measured & paid as one unit.) |
| 173 | Supply and fix water heater storage type electric, capacity 25 litres BEE 5 star BEE rating AC 230 volts, 50 Hz vertical type including material and labour for grouting four Nos rack bolt for holding of water heater on wall including making good and match existing surfaces and complete all as specified and as directed by Engr-in-Charge. Make : Usha Misty or euivalent |
| 174 | Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 25 Sqmm 4 core laid in trenches, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge. |
| 175 | Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 16 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge. |
| 176 | Supplying, laying, jointing and testing under ground XLPE insulated armoured heavy duty electric cable with aluminium conductor 1100 vols grade cross sectional area 10 Sqmm 2 core laid in trences, in floor, in duct, through pipes or along the pole including taking down old one complete all as specified and directed by Engr-in-Charge. |
| 177 | Material and labour for sand cushioning to under ground cable with a layer of sand 8 cm thick before laying of cable and 15 cm thick after laying of cable complete all as specified and directed. |
| 178 | Material and labour for brick protection using old size sub class ‘B’bricks, laid flat, dry adjacent to each otherlaid length wiseperpendicular to theaxis of cable complete all as specified and directed. |
| 179 | M&L for pipes galvanized, “Medium class”, supplied and laid complete including fittings 20 mm dia complete all as specified anddirected. |
| 180 | Supply and fixing 25 mm bore steel water tubing, medium grade, galavanised with all fittings and laid in trenches complete all as specified and directed. |
| 181 | All as per description of Srl item No 172 here-in-before but 40 mm bore pipes complete all as specified anddirected. |
| 182 | Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 40 mm bore iron pipe and fixed in position complete all as specified and as directed. |
| 183 | Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 25 mm bore iron pipe and fixed in position complete all as specified and as directed. |
| 184 | Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 20 mm bore iron pipe and fixed in position complete all as specified and as directed. |
| 185 | All as per description of Srl item No 1 here-in-before but 15 mm bore pipes complete all as specified and directed. |
| 186 | Supply and fixing gun metal globe or gate valve with iron wheel head, screwed both ends for 15 mm bore iron pipe and fixed in position complete all as specified and as directed. |
