|
| 1 | Taking up or down steel water tubing and connections of 20mm bore, fixed in walls, ceiling, floors, trenches etc, complete all as specified and directed by Engr-in-Charge. |
| 2 | M&L for cutting chases, pinning in, making good to facings as original where required and pointing in cement mortar 1:3 for concealed water tubing etc. and making good, cutting not exc 10 cm girth in brick walls, complete all as specified and directed by Engr-in-Charge. |
| 3 | M&L for galvanized steel water tubing medium grade of 15mm bore with & including all fittings and fixed complete to walls and ceilings or laid in floors, complete all as specified and directed by Engr-in-Charge. |
| 4 | S&F in repairs PVC valveless symphonic action type low level flushing cistern (ISI marked) of 10 litre capacity including32 mm dia PVC flush pipeconnected to water closet with inlet, ball valve, float and handle, complete all as specified and directed by Engr-in-Charge.Make : Commander, CERA, Pearl, Parryware Slimline |
| 5 | S&Fin repair PVC connection 450 mm long suitable for 15 mm bore GI pipe including CP brass nuts on both sides,complete all as specified and directed by Engr-in-Charge. |
| 6 | S & F for 5 mm thick glass Corner shelf 300mm with chromium plated guard, fixed with brass screws and wooden/plastic cleats, complete all as specified and directed by Engr-in-Charge.Make : Prayag, L&K, Shakti, Coronet. |
| 7 | S&F in repairs brass chromium plated shower rose 125 mm size without swivel joint including fixing to steel pipe of 15mm bore or union, complete all as specified and directed by Engr-in-Charge.Make : Prayag, Pumber, Mark. |
| 8 | Dismantling /cutting of stone slabs and tiles laid in bedded cement mortar of any description or thickness in floors, aprons etc, complete all as specified and directed by Engr-in-Charge. |
| 9 | M&L for 18-20 mm thick machine cut granite (of any type )andin any colour work (table rubbed & polished) in floor,steps, jambs, pillars, window-cills, cooking platforms & like, over 15mm thick screed bed in cement mortar (1:4) including pointing into white cement (1:2) using marble dust with admixture of pigment to match shade of granite, complete all as specified and directed by Engr-in-Charge. |
| 10 | Treatment of Floor joints : All stone shall be cut to open the expansion joint remove all the malba to reach the parent slab. Clean the surface the surface with wire brush to remove all the dust. PCC shall be done to raise the level of Expansion joint to fix the Aluminium section. Providing BIZZER -426-ALR-100, base mounted seismic Expansion joint cover made from aluminium of Grade T-6 for floor-to-floor expansion jonts at VDF areas subjected to Fork Lifter movement. Movement capacity (+/-50%) system must have aluminium side frames of 2mm thickness and width 50mm each centerplate multy layer mechanism of total thickness 13mm total sightline 200mm and profile 3000mm height of he system should be 27 mm including GI sheet/aluminium sheet |
| 11 | S & F in repair for 100 mm long Hasp & staple, safety type, Stainless steel with mild steel hinges pin including bolt to hinges plate & fixed with screw, complete all as specified and directed by Engr-in-Charge. |
| 12 | S&F in repairmild steel helical door spring 300mm ordinary rat tail rod pattern spring including roller and roller plate, complete all as specified and directed by Engr-in-Charge. |
| 13 | S&F in repair butt hinges of size 100 mm medium weight, stainless steel ISI marked, complete all as specified and directed by Engr-in-Charge. |
| 14 | S&F aluminium handle, 150mm size, cast type, anodized (ISI marked), complete all as specified and directed by Engr-in-Charge. |
| 15 | S&F in repair 200 mm long aluminium anodized barrel tower bolts of extruded section (ISI marked), complete all as specified and directed by Engr-in-Charge. |
| 16 | S&F in repair 300 mm long mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia and including a minimum of 06 bolts and nuts, four on bolt plate and two on staple plate and fixed, complete all as specified and directed by Engr-in-Charge. |
| 17 | S&F CP grating 125mm dia without waste hole, complete all as specified and directed by Engr-in-Charge. |
| 18 | S & F in repair gun metal gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of 20mm dia, complete all as specified and directed by Engr-in-Charge. |
| 19 | S & F in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm fixed with tinned tacks or galvanised wire staples or necessary welding works for MS windows,door and wooden door etc, complete all as specified and directed by Engr-in-Charge. |
| 20 | S & F for double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty , complete all as specified and directed by Engr-in-Charge. |
| 21 | S & F in repair for door closer hydraulically regulated designation No 3, universal type, suitable for door shutter of weight between 61 to 80 Kg of aluminium extruded sec body , complete all as specified and directed by Engr-in-Charge. |
| 22 | S & F in repair floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor, over all length of cover plate 140 mm, complete all as specified and directed by Engr-in-Charge. |
| 23 | S&F in repairs 4.00 mm thick sheet glass ordinary quality and glazing with oil putty in squares not exc 0.5 sqm in each pane in any location and height incl hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete, complete all as specified and directed by Engr-in-Charge. |
| 24 | Dismantling of Wall & ceiling boards (fiber, pulp, insulation, etc) or insulation boards/slabs/blankets, any thickness, including cover fillets, complete all as specified and directed by Engr-in-Charge. |
| 25 | M & L of anodized aluminium snap grid size 605x605mm of frame work for false ceiling, complete all as specified and directed by Engr-in-Charge. |
| 26 | Providing and fixing of E-board `Everest` or equivalent make 600 x 600 mm and 04mm thick white prelaminated sett embosed reinforced designer as approved ceiling board/tiles at any height, complete all as specified and directed by Engr-in-Charge. |
