|
| 1 | Dismantling of boarding, any description, fixed in any position with screws etc all as directed. |
| 2 | S&F inFalse ceiling with \"E\" board \" Classic\"\" Re enforced, designer series, board with HPSC of size 600x600mmx4mm thick fixed on Powder coated aluminium snap grid to support the boards/files with powder coated aluminium anodised ain \"T section 36mmx25mmx1.40mm ,cross tee 23.50mmx23.50mmx1.40mm thick and aluminium angle 25mm x 25mm x1.40mm as on edges/sides, fixed to ceiling with hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabsby means of ceiling cleats made out of GI flat 40x3mm size60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified and directed |
| 3 | Dismantling wrought iron or mild steel work of any description not otherwise provided for. complete all as directed. |
| 4 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc of grade FE 410 W grade E 250 quality A. complete all as spd and as directed. |
| 5 | Dismantling of Asbestos cement (corrugated, semi-corrugated, etc.) sheets in roof coverings etc complete all as directed. |
| 6 | S&F Pre- painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified and as directed. |
| 7 | S&F for pre-painted Galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as inroof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 8 | M&L for Preparing new Steel or Iron Surfaces of any description, over 10 Cm width or girth and applying Two Coats of Synthetic Enamel Paint over a coat of Red Oxide/ Zinc Chrome Primer, complete all as specified and as directed. |
| 9 | Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed |
| 10 | M&L for 100mm thick cementconcrete type B-1, 1:2:4 using 20mm graded aggregate in floors finishing cement concrete surface even andsmooth using extra cement complete all as specified and directed. |
| 11 | M&L for dark shade verified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid screed bed 20 mm thick CM 1:6 complete all as specified and directed. |
| 12 | M&L for dark shade verified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in wall etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over laid backing coat 10mm thick plaster CM 1:4 complete all as specified and directed. |
| 13 | Demolition of stone slabs and tiles of any description or thickness in floors/vertical surfaces, etc laid, bedded and pointed in any mortar, etc complete all as specified and directed by Engineer-in-charge. |
| 14 | M&L Granite (of any type) tiles 20mm thick machine cut, bedded & jointed with grey cement slurry & pointed with white cement with admixture of pigment to match the shade of granite stone including cutting & polishing over 20 mm thick screed in CM(1:4) etc complete all as spd and as directed. |
| 15 | Demolition of Brickwork masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed. |
| 16 | M&L for Brickwork with old size fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified. |
| 17 | M&L for Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished fair and even and smooth (without using extra cement) etc complete all as specified and as directed. |
| 18 | M&L Preparing old decorated Plaster Surfaces of Wallwashing, rubbing down and stoppingof distempered and painted surfaces of walls and applying oneCoat of oil bound distemper complete all as specified and as directed. |
| 19 | Material & Labourcomplete removal of old surface of wallsapplying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over all as specified and directed. |
| 20 | M&L Preparing old Painted Steel Surfaces over 10 Cm width or girth not otherwise described and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 21 | M&L Preparing old Wooden Surfaces of any description not otherwise described over 10 Cm width or girth and applying One Coat of Synthetic Enamel Paint (First quality), complete all as specified and as directed. |
| 22 | Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key and scrubbing down with water complete All as specified and as directed. |
| 23 | M&L 15 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:6 complete all as directed. |
| 24 | M&L 15 mm thick cement plaster on brick or concrete walls finishing fair and even in CM 1:4 complete all as directed. |
| 25 | M&L Preparingnew plastering Surfaces of Wall and applying two Coast of oil bound distemper complete all as specified and as directed. |
| 26 | Material & Labour preparing new plaster surfaces for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. |
| 27 | Taking down steel window/ventilators of any size including grill/guard bars and removing to store complete all as directed. |
| 28 | S&F in repair powder coated anodised aluminium doors frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified. |
| 29 | S&Faluminium anodised powder coated for doors, windows, ventilators and partition with one or more rebate (Minimum thickness of powder coating 50 micron) and Three track with 1.80 mm thick channel section and shutter frame thickness 1.65 mm without sash bars, Aluminium section weighing 0.55 kg/mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. Complete all as specified and directed. Note:- 1.Size of window shall be as per site requirement. 2. Glass & wire cloth shall be measured separately. |
| 30 | S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as directed. |
| 31 | S&F 4mm thick ordinary quality sheet glass/frosted glass and glazing with oil putty in square n.exc. 0.5 Sqm in each pane complete all as directed. |
| 32 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm and n.exc.4.00 Sqm each wooden all as directed. |
| 33 | S&F for 2nd class HW, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, moulded or chamfered, put together with glue, pinned at joints complete all as directed |
| 34 | S&F 30mm thick 2nd class hard wood glazed & skeleton shutters, open rebated and prepared to received glass, gauge etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, size of members of shutters as specified in SSR Part-I section 8, clause 8.20(a) complete all as directed. |
| 35 | S&F Factory made 35mm thick with 2nd class hard wood, rail and style factory made plain framed panelled shutter with lock, rail and panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail & style as per IS:1003(Part-I) kiln seasoned and chemically pressure treated. |
| 36 | S&F 100mm butt hinges stainless steel medium weight |
| 37 | S&F aluminium handle, cast type anodised 125mm sizeall as directed. |
| 38 | S&F 150mm aluminium anodised barrel tower bolts of extruded section |
| 39 | S&F 300mm aluminium, anodised sliding door bolt with hasp, staple(bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloyall as directed complete all as directed. |
| 40 | Preparing new surface of wood or wood based material of any description and in any position not otherwise described n.exc 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as directed. |
| 41 | S&F 20mm dia fancy type Harrison rails (Curtain rod) mild steel, chromium plated including fixing brackets, stops, rollers et fixed on wall sample as approved by GE complete all as directed. |
| 42 | Note: Schedule of credit (SCHEDULE OF CREDIT)amount of Rs ________ mentioned on Page No ____ shall be deducted from the total quoted amount of BOQ. |
