|
| 1 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description not exceeding 1.5 Sqm each completeall as specified and directed |
| 2 | Ditto all as above but exceeding 1.5 Sqm but not exceeding 4 Sqm each completeall as specified and directed. |
| 3 | Supply and fixing factory made uPVC door frame made of uPVC. extruded sections having an overall dimension (extruded section profile) 42x50 mm (tolerance ± 1 mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete all as specified by the manufacturer and as per directions of Engineer-in-charge |
| 4 | Supply and fixing factory made uPVC white colour Casement door with 3D hinges made of (big series) frame 67 x 64 mm & sash 67 x 110 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension.comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges , one handle on each side of panels along with zinc plated mild steel multi point locking having transmission gear,one lock with key, cylinder with keeps and one side key, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws tc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in- Charge. |
| 5 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriatedimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers,plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion weldedat all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. |
| 6 | Supply and fixing factory made uPVC white colour Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension (Area of window upto 0.75 sqm.) comprising of uPVC multichambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length(shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. |
| 7 | M & L for 5 mm thick toughened glass including including neccesary fittings in each pane complete all as specified and directed. |
| 8 | M&L for 12 mm thick toughened clear trasparrent glass as in wall/door cladding fixed with necessary patch fittings s fixed in position ,including edge polishingcomplete all as specified and directed by the Engineer-in-Charge. |
| 9 | S&F for floor spring for glass door complete all as specified and directed.make:- godrej D-80 door control lock 8293 or equivalent |
| 10 | S&F for stainless steel lock for glass door complete all as specified and directed.make:- godrej model no 7780 or equivalent |
| 11 | S&F for stainless steel satin finish handledoor of size (25 x 325 mm) complete all as specified and directed.make:- godrej model no 7780 or equivalent |
| 12 | S&F for stainless steel satin finish glass to glass hinges complete all as specified and directed.make:- godrej or equivalent |
| 13 | S&Ffor Aluminium alloy wire cloth, 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with aluminium wire staples complete all as specified and directed. |
| 14 | M&L granite 15-18mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20mm thick 1:6 cement mortar all as specified and directed. |
| 15 | M&L for granite (of any type) tiles 15-18mm thick machine cut, in skerting/dado bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding ,rounding edge and polishing over and including 15mm thick backing coat in CM(1:3) complete all as specified and directed by the Engineer-in-Charge. |
| 16 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationsall asspecified and directed by Engineer-in-Charge. |
| 17 | Dismantling MS work of any description not otherwise provided forall asspecified and directed by Engineer-in-Charge. |
| 18 | S & F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge |
| 19 | S&F in repair SS Cover plate hydraulic floor spring door closer single cylinder body embeded,adjustable for aluminium door complete. |
| 20 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish offpremises etccomplete all as specified and directed by Eng-in-Charge. |
| 21 | M & L for joint free double charged vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 22 | M & L forjoint free double charged vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in skerting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coatin cement mortar 1:3 complete all as specified and directed. |
| 23 | M & Ljoint free coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. |
| 24 | M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.36 sqmas in skirting/dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. |
| 25 | Demolition of brick work built in cement mortar including all quoions, arches pillar etc complete all as specified and directed by the Engineer-in-Charge. |
| 26 | M&L brick work with sub class \"B\" bricks, straight or curved on plan exc. 6 mtr mean radius built in CM(1:6) complete all as specified and directed. |
| 27 | M&L rendering 15 mm thick in cement mortar 1:4 mix with water proffing material @200 mg/L on fair faces of brick or concretesurfaces finished even and fair complete all as specified and as directed. (Note:- waterproofing compound measured separatly.) |
| 28 | Supply only water proofing compound complete all as specified and directed. |
| 29 | M&L Rendering 10mm thick in cement mortar (1:6) on fair faces of brick work or concrete for fair and even Surfaces.complete all as specified. |
| 30 | M & L for preparation of old plastered surface of wall/ceiling, complete removal of existing treatmentand painted surfaces complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&Lapplying 1mm thick wall care putty on walls,ceiling etc complete all as specified and directed by Engineer-in-Charge. |
| 32 | M & L for preparation of new surface and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 33 | M & L for preparation of old ceiling surface and applying two coat of oil bound distemper complete all as specified & directed by Engr-in-Charge |
| 34 | M&L preparation of new surface and applying two coats of cement based paint over a coat of primer complete all as specified and as directed by Engr-in-Charge |
| 35 | Excavating over areas, in soft / losse soil/hard n exc 1.5 m deep and getting out in loose soil complete as specified and directed. |
| 36 | Returning, filling in, including spreading, levelling, watering and well ramming in layers,soilnot exc 25 cm.complete as specified and directed. |
| 37 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15cm thickness complete all as specified and directed by Engr-in-charge. |
| 38 | M&L for PCC 1:3:6 type B-2 (using 40 mm graded stone aggregates)as in foundation, fillings and mass concrete complete all as specified and directed. |
| 39 | Demolition of reinforced cement concretein any position complete all as specified and directed by Engr-in-charge. |
| 40 | M&L for RCC 1:2:4 nominal mix using 20 mm graded stone aggregate as in footings, plinth beam, bases for columns and mass concrete complete all as specified and directed. |
| 41 | M & L RCC 1:2:4 nominal mix using 20 mm graded stone aggregate as in Columns pillars and similar works complete all as specified and directed. |
| 42 | M & L RCC 1:2:4 nominal mix using 20 mm graded stone aggregate as in lintel band /beam and similar works complete all as specified and directed. |
| 43 | Use and waste of formwork to sides of concrete foundations, footings, bases of columns,plinth beams and similar work; vertical or to batter for surface fair and finish as specified and directed. |
| 44 | Use and waste ofform work of sides of pillars, posts, struts, piers, columns,wall and like etcsquare or rectangular or polygonal finished rough surface of concrete complete all as specified and directed. |
| 45 | S & F TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 46 | S & F TMT bars 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for stirrups,spacers & binders binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 47 | Dismantling of paver blocks/ stone slab of any desciption and any thickness in floors icluding removing of sand cushioning , laid dry complete all as specifed and directed. |
| 48 | M&L providing glossy finish chequered cement concrete tiles 25cm x 25cm x 20-22mm/30cmx30cmx20-22 thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigmentlaid over and includingscreed bed or bedding layer 20 mm thick in cm 1:6 as in floors complete all as specified and directed. |
| 49 | Ditto all as per tiem No. 48 but except tile |
| 50 | M&L for PCC1:4:8 type D-2 using 40mm graded stone aggregate as in sub base to floor etc complete all as specified and directed by Engr-in-charge. |
| 51 | M&L in repair for interlocking carpet shaggy foam play mat velvet fluffy area rugs squre shape and solid pattern plush puzzle floor tiles climbing mats for room of any size complete all as specified and directed. |
| 52 | S&F in repair premium multipurpuse wall mounted storage cabinet mirror in shelve any size,prime look complete all as specified and directed. |
| 53 | S&F in repair for plain self adhesive vinyl , polyvinyle chloride wall paper heat resistant, waterproof, oil resistant, reposisnable in any design pattern, any colour, complete all as specified and directed. |
| 54 | S&F wall brackets lanterns in B22 brass aluminium cover cast aluminium body finished with polyurethane paint (with prior treatments) with acrylic window cover total length 393 mm, max projection breath 205 mm, base provided 134mm x 101mm for wall mountingcomplete all as specified and directed. Make:- Mepro/crompton/Havells |
| 55 | S&F LED wall light, LED picture ligh, asthetically design with multiple body colour option, high efficiency, LED, opaque diffuser, inbuilt driver suitable for highlighting wall hangingcomplete all as specified and directed by Eng-in-Charge. Make:- Shakti/Mepro/Crompton/Havells |
| 56 | S&F LED strip light, 25 watt, flexible strip with driver, high efficiency with uniform illumination IP-20 with all connecting accessories complete all as specified and directed. |
| 57 | S&F LED wall light 6 watt with UP-DOWN, 6 multidirectional beam luminaire with wall surface mounting and IP-65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified and directed by the Engineer-in-Charge. |
| 58 | S&F LED wall light 6 watt with UP-DOWN, 4 multidirectional beam luminaire with wall surface mounting and IP-65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fitting complete all as specified and directed by the Engineer-in-Charge. |
| 59 | S&F LED CLIO wall light 6 watt with UP-DOWN luminaire with wall surface mounting using COB LED as light source and IP 65 protection luminaire, corrosion resistant complete with all accessories including making proper base structure for fittingcomplete all as specified and directed by the Engineer-in-Charge. Make- Crompton Greaves/ Havells/Phillips |
| 60 | Note :- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix \"B\" to Particular specifications as approved by AGE (I) AF manauri |
