|
| 1 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description not exceeding 1.5 Sqm each completeall as specified and directed |
| 2 | Taking down chowkhat with shutter without taking off shutter from chowkhatof any description exceeding 1.5 Sqm but not exceeding 4 Sqm each completeall as specified and directed. |
| 3 | S&F factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applyingPVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimumompressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and lengthcompleteall as specified and directed. |
| 4 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative typeflush door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, completeall as specified and directed. |
| 5 | S&F factory made single extruded WPC (Wood Polymer Composite) solid decorative type gauged door shutter of 35mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately |
| 6 | Providing and fixing factory made uPVG white colour Sliding window Three track area not exc. 2.0 sqm made of extruded profiles with wall thickness of 2.3mm (+ -0.2mm). Window profile with hollow section with multi chamber. Frame (88mm x 52mm), sliding sash (42mm x 67mm). Sliding mesh Sash (42mm x 57mm) Sliding interlock (One vertical length in each shutters) (45.5mm x 28mm), Glazing bead (24.5mm x 16mm) will be miterd cut and fusion welded at all corners, including drilling of holes for fixing hardware and drainage of water etc., making arrangement for fixing of hardware. EPDM gasket, 1.2+ -0.2mm thick galvanised steel Frame (30mm x 18mm) 2 nos, sliding sash (30mm x 18mm), sliding mesh sash (26mm x 10mm) profile to be inserted in required profile, frame will be fixed to the wall with 8mm x 100mm long fasteners, Hardware [Touch Lock of zinc alloyed (white powder coated), steel roller system. Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories completeall as specified and directed.Note: The unit rate quoted by contractor excludes cost of glass and includes all other connected accessories. Net Opening will be measured lor payment purpose. |
| 7 | Supply and fixing factory made uPVC white colour Casement door with top hung ventilator with 3D and SS friction (400 x 19 x 1.9 mm) made of (big series) frame 67 x 64 mm, sash 67 x 110 mm & mullion 67 x 80 mm all having wall thickness of 2.3 + 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of door upto 2.50 sqm) comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, zinc alloy (white powder coated) 3D hinges and one handle on each side of panels along with zinc plated mild steel multi point locking havingtransmission gear, cylinder with keeps and one sidekey, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality complete all as specified and directed by Engineer-in-Charge. Note :- Glass shall be paid separately in respective item. |
| 8 | M & L for 5 mm thick plain sheet glass ordinary quality including glazing with putty area area n.exc 0.5 Sqm in each pane complete all as specified and directed. |
| 9 | S&Faluminimum alloy wire cloth. 0.45mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 10 | S&F butt hinges medium weight stainless steel 100mm size, ISI marked complete all as specified and directed. |
| 11 | S&F stainless steeltower bolt 200mm complete all as specified and directed. |
| 12 | S&F stainless steel 250 mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type complete all as specified and directed. |
| 13 | S & F 300mm MS ordinary rat tail rod pattern springs, incl roller and roller plate complete all as specified and directed. |
| 14 | S&F stainless steel handles,150 mm size complete all as specified and directed. |
| 15 | M&L granite 15-18mm thick work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over 20mm thick 1:6 cement mortarcomplete all as specified and directed. |
| 16 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situationsall asspecified and directed by Engineer-in-Charge. |
| 17 | M&L brick work with sub class \"B\" bricks(old size bricks) straight or curved on plan exceeding 6 mtr mean radius built in cement mortar 1 : 6 and external face of brick work pointed flush in the same mortar as the work proceeds, complete as specified and directed. |
| 18 | Taking down cement plaster on brick/stone surface of wall built in cement mortar including racking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 19 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:4 finished even and fair. complete all as specified and directed. |
| 20 | M & L for rendering 15 mm thick on fair face of brick walls or concrete surface in CM 1:6 finished even and fair. complete all as specified and directed. |
| 21 | M & L for preparation of walls and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm/ltr and UV resistance as per IS 15489:2004, alkali & fungal reistance, dirt resistance exterior paint of required shade (company depot tinted) with silicon aditives at 1.43 ltr/10sqm over and including priming coat of exterior primer applied at 0.90ltr/10sqm all asspecified and directed by Engineer-in-Charge. |
| 22 | M&L for PCC type B-1 (1:2:4) 20 mm graded aggregate as in concrete for fixing holdfasts for bed blocks etc complete all as specified and directed |
| 23 | Dismantling MS work of any description not otherwise provided forall asspecified and directed by Engineer-in-Charge. |
| 24 | S & F MS framed work such as grills, gratings, frames,holdfast etc with ends of bars shouldered and or riveted or forgot into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walkways, railings, frame work of water tank and similar workall asspecified and directed by Engineer-in-Charge. |
| 25 | Dismantling floor, hearth or wall tilling including cement mortar bedding(but not backing), and rubbish offpremises etccomplete all as specified and directed by Eng-in-Charge. |
| 26 | M & L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed. |
| 27 | M & L for vitrified ceramic tiles 10mm thick light shade (square/rectangular) polished, area of each tiles not exc 0.36 sqm in skerting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick backing coatin cement mortar 1:3 complete all as specified and directed. |
| 28 | M & L coloured non-skid ceramic tiles joint free ceramic tiles 7 to 8 mm thick( square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed by Eng-in-Charge. |
| 29 | M&L coloured glazed ceramic tiles in vertical surface 350x 250x 7mm/ 450X 350X 7mm thick on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over 10 mm thick backing coat in cement mortar 1:3 complete all as specified and directed by Eng-in-Charge. |
| 30 | M & L for preparation of old plastered surface of wall/ceiling, complete removal of existing treatmentand painted surfaces complete all as specified and directed by Engineer-in-Charge. |
| 31 | M&Lapplying 1mm thick wall care putty on walls, complete all as specified and directed by Engineer-in-Charge. |
| 32 | M & L for preparation of new surface and applying two coats of Oil bound distemper on walls over a coat of primer complete all as specified and as directed by Engr-in-Charge. |
| 33 | M&L applying 1mm thick wall care putty on ceilings and after drying the surfaces sand the putty smooth before painting complete all as specified and directed. |
| 34 | M & L for preparation of new surface of ceiling including cornices and apply two coats of oil bound distemper over a coat of primer complete all as specified and directed by the Engineer-in-Charge. |
| 35 | S & F Solid PVC Double door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing wood grain printed PVC sheet used instead of Plain colour PVC sheet in opening as per specification & drawingcomplete all as specified and directed . |
| 36 | S & F Factory Made with particle board core solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as shown in SSR Part – I 2009 complete all as specified and directed by Engineer-in-Charge |
| 37 | S&F butt hinges medium weight stainless steel 75mm size, ISI marked all as specified. |
| 38 | S&F stainless steelhandles, anodized 100 mm size complete all as specified and directed. |
| 39 | S&F stainless steel200mm long sliding door bolt with hasp and staple (bolt type) and fixing clip and bolt extrude section or cast alloy type all as specified and directed. |
| 40 | S&F stainless steeltower bolt 150mm complete all as specified and directed |
| 41 | S&F floor door stopper of aluminimum alloy body and toung of overall size 150 mm anodised, with hard drawn steel spring fixed in floor complete all as specified and directed |
| 42 | Note:- (i) Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material. The contract amount shall be arrived at after deduction of Schedule of Credit from the total quoted amount in BOQ.(ii) Make of material shall be as per mentioned in Particular specifications or Appendix \"B\" to Particular specifications as approved by AGE (I) AF manauri |
