|
| 1 | Demolition of cement concrete in any descritpion complete all as specified and as directed. |
| 2 | Taking down cement plaster of any description on stone or brick walls etc including racking out joints, hacking for key, scrubbing down with water etc.complete all as specified and as directed. |
| 3 | 15mm thick cement plaster in CM 1:4 on fair faces of bricks or concrete surfaces & finishing the surface even and smooth without using extra cement, complete all as specified and as directed. |
| 4 | 10mm thick rendering in cement mortar 1:6 on other than fair faces of brick or concrete surface including finishing even & smooth without using extra cement complete all as specified and as directed. |
| 5 | Demolition of brick work or stone/boulder masonry built in cement mortar or cement lime mortar incl all quions, arches, pillars etc complete all as specified and as directed. |
| 6 | Brick work with sub class ‘B’ bricks straight or curved on plan exc 6m mean radius, built in cement mortar (1:6), all as specified and directed. |
| 7 | Plain cement Concrete 1:2:4 type-B1 (using 20mm graded crushed stone aggregate) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, coping, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating as specified and directed. |
| 8 | 50mm thick PCC 1:3:6 Type C-1 (using 20mm graded crushed stone aggregates) laid in alternate bays (not exceeding 2 sqm each) as in plinth protection, finished the surfaces even & fair, joints filled with mastic filling comprising one part of bitumen 85/25 grade and three parts of sand by weight complete all as specified and directed. |
| 9 | Preparation of newly plasteredor unplastered surfaces of wall and applying two coats of cement base paint, complete all as specified and directed. |
| 10 | Preparation of old plastered or un plastered wall surfaces including washing,scrubbing down and stopping of distermperd surfaces and applying one coat of oil bound distemper, complete all as specified and directed |
| 11 | Preparation of newlyplastered surface of wall including cornices pilaster etc, and applying two coats of oil emulsion distemper overprimer including 1-2mm thick wall care putty, complete as specified and directed. |
| 12 | Taking down chowkhat or frame exc 1.5 sqm but n exc 4 sqm each with shutters (without taking of shutter from the frames) complete as specified and directed. |
| 13 | Brass handles (150mm), cast type, polished bright, complete all as specified and directed. |
| 14 | 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 15 | Decorative laminate type 1, 1.5mm thick of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer\"s instruction complete as specified and directed. |
| 16 | Butt hinges (100mm), cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 |
| 17 | Brass barrel tower bolts (200mm), with cast or sheet barrel and rolled or cast bolts and fixed complete as specified and directed. |
| 18 | Brass, sliding door bolt 300mm with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts and fixed complete as specified and directed. |
| 19 | Taking up or down 15mm bore steel tubing & connection including cleaning for or removal from site complete as specified and directed. |
| 20 | Taking up or down 20mm bore steel tubing & connection including cleaning for or removal from site complete as specified and directed. |
| 21 | 15mm bore tubes medium grade galvanized with all fittings such as Tee, elbows, sockets, unions, plugs, short lenghts etc. and fixed complete to walls and ceilings or laid in floors concealed or open of any length complete as specified and directed. |
| 22 | 20 mm bore tubes medium grade galvanized with all fitting such as Tee, elbows, sockets, unions, plugs, short lenghts etc and fixed complete to walls and ceilings or laid in floors of any length complete as specified and directed. |
| 23 | Supply and Fix in repair 15mm bore dia Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs & Wall Flange (without Hand & Overhead Shower), with chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.Make: Jaquar Cat No. - FLP-5281PM or its equivalent in Kohler/Rocka |
| 24 | Supply and Fix in repair 15mm dia Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed, as specified and directed. |
| 25 | Supply and Fix in repair vitreous china wash down water closet pan pedestal pattern white including connection in drain andin flushing pipe complete including \"P\" or \"S\" trap and including plastic water closet seat cover with flat bottom and cover with MS Chromium plated hinge divice ISI marked complete all as specified and directed . |
| 26 | Supply and Fix in repair High or low level PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets and connections to pipes and fixing of chain and pull, or lever, if any as specified and directed. |
| 27 | Health faucet (ABS) body mild steel chromium plated suitable for 15mm dia pipe with 1.25 meter long flexible tube and ABS wall hook including making connections and fixed in positions complete in allas specified and as directed. |
| 28 | Toilet paper holder of white vitreous china, box type fixed to plug with chromium plated brass screws all as specified and as directed. |
| 29 | Supply and Fix in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm longcomplete in allas specified and as directed. |
| 30 | Supply and Fixin repairs tubular towel rail, brass cromium plated, 20mm dia, D type, 60cm long between flanges including flanges complete in allas specified and as directed. |
| 31 | Supply and Fix in repair Bib tap long shank fancy type cast copper alloy,chromium plated with crutch or butterfly handle, screwed down, screwedfor 15 mm bore iron pipe or for brass ferrule and fixed, complete in allas specified and as directed. |
| 32 | Stop valve/angle valve cast copper alloy, chromium plated with capstan head, screwed down, high pressure screwed both ends for 15 mm bore iron pipe or for unions and fixed in repaircomplete in allas specified and as directed. |
| 33 | Supply and Fix in repair Vitreous chinawash hand basin, whiteflat back, size 580 x 450 mm with brackets, including cutting for and pinning in ends of brackets or erecting stand complete in allas specified and as directed. |
| 34 | PVC connection 600mm long 15mm dia with GI nuts and washers complete in allas specified and as directed. |
| 35 | Applying two coats of synthetic enamel paintover a coat of red oxide primer to new or previously untreated steel surfaces not exceeding 10cm width or girth including preparation of surfaces, complete all as specified and as directed. |
| 36 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings. complete all as specified and as directed. |
| 37 | Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 38 | Dismantling of wall/ceiling board (fibre, pulp, insulation, etc) or insulation board slabs/ blankets,of any thickness, including cover fillets complete all as specified and directed. |
| 39 | Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on and including PVC frame and fillets complete all as specified and directed |
| 40 | 12mm thick toughned glass as in hinged door &partitions automatic doors and similar work including cutting to shape, drilling holes required complete in allas specified and as directed. |
| 41 | 25mm thick PCC 1:2:4 type B0 (using 12.5 mm graded stone aggregate) as in sub base and flooring, etc. complete all as specified and as directed. |
| 42 | Vitrified ceramiclight shade tiles 10mm thick (square/rectangular) polished, area of each tile notexc 0.36 sqmin floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer with CM 1:6 all as specified and directed |
| 43 | All as per Item No.42 above but in skirting over 10mm thick rendering in CM 1:4 complete all as specified and directed. |
| 44 | ColouredNon Skid ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with & incl 15mm thick screed bed or bedding layer with CM 1:6 complete all as specified and directed. |
| 45 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 46 | Glazed ceramic colouredtilesof size300x200x7mm / 450 mm x 350 mm x 7mm thick as in vertical surfaces , set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over and including 10 mm thick cement screed in cement mortar 1:4 complete all as specified and directed. Shade/Colour of tile shall be approved by the GE. |
| 47 | Providing and fixing 10mm thick plaster of paris ceiling (Gypsum anhydrous) to flat surface over 2nd class soft wood fillets, or metal frame work and reinforced with G.I. wire mesh (Fillets, metal frame work and G.I. wire mesh all as specified design and pattern as directed by Engr in Charge, rates are including forcutting of ceiling for light points and provn of cobing and counter sunk at corners/ or as specified and as directed by Engr-in charge. |
| 48 | Preparation of newly POP surfacesand applying two or more coats of plastic emulsion paint over a coat of oil primerto ceiling all as specified and directed. |
| 49 | Taking down exsting roof treatment of any description in any condition including removing of cement plaster of concrete of any description form the roof surfaces and removing all the debris to a distance n exc100m and roughening surfaces by sweeping clean and washing down with water toremove dust etc and applying evenly cement slurry at the rate of 3 kg/sqm over cleaned surfaces and providing 10mm thick cement screed in CM 1:4, finished surface even and smooth, after that cleaning the entire roof surface thoroughly to remove all loose particles, dust/dirt particles and applying with one coat of industrial bituminious primer at the rate of 0.40ltr /sqm over the plastered surfaces of roof and applying a coat of binding material with blown type bitumen of grade 85/25 heating to working temperature of 1800c @ 1.2kg/sqm then applying APP based polymericmembrane minimum weighing 3Kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt not less that 150 gms/sqm) laid with 75 mm side overlap and 150 mm end overlap by forced application as per manufactures instructions andcomplete all as specified and directed. |
| 50 | Supply and Fix in repair for PVC (SWR) pipes 110 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors all as spd and directed. |
| 51 | Supply and Fix in repair for PVC (SWR) pipes 75 mm single socketed, in any length with rubber ring joints, laid in trenches or in floors all as spd and directed. |
| 52 | Supply and Fix in repair 110mm bore PVC (SWR) bends any radiusall as specified and directed. |
| 53 | Supply and Fix in repair 110mm bore PVC (SWR) branch piece, double (doubleY) equal or unequal all as specified and directed. |
| 54 | Supply and Fix in repair PVC floor trap with grating including jointing with solvent cement to waste pipe 75 mm dia. |
| 55 | Supply and Fix in repair 75mm bore PVC (SWR) bends any radiusall as specified and directed. |
| 56 | Supply and Fix in repair 75mm bore PVC (SWR)vent cowl suitable for pipes complete all as specified and directed. |
| 57 | Supply and Fix in repair rotational moulded polyethylene water storage tanksdouble layer, ISI marked layer (Cylindrical vertical with threaded closed top) hoisted and fixed in position all as spd in SSR Pt-I,of capacity500 Ltrs, complete, screwed for iron pipe or brass ferrule and fixed, incl dismantling of existing water tank, complete all as specified and as directed. |
| 58 | Supply and Fix in repairs 20 mm bore, Ball brass valves, high pressure, with polythene float and fly nuts complete, screwed for iron pipe or brass ferrule complete all as specified and directed. |
| 59 | Demolition of cement concrete (un reinforced) in ground floors and paving n exc. 15 cm thickness, below or above ground level complete all as specified and directed. |
| 60 | Supply and Fix 4 mm thick E-board (Make : Classic) with and including fixing to frame work made Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including fixing of E-board as per manufacturer instructions complete all as specified and directed. |
| 61 | Chequered cement concrete tiles with grey cement and pigments of size 30cmx30cm x25 mm thick,set, jointed and pointed in neat cement slurry in floors including 20 mm thick screed bed in CM 1:6, incl 75mm thick cement concrete type D-2 1:4:8 using 40mm graded agg, as in sub base for floor complete all as specified and diected. |
| 62 | Colouredglazed ceramic tiles 7 to 8mm thick (square/rectangular) are of each tile exc 0.11 Sqm but n.exc. 0.18 Sqm in vertical surfaces such as skirting, dados and risers to steps etc including 10 mm thick plaster in CM 1:4 complete all as specified and directed. |
| 63 | Rendering 15 mm thick in cement mortar 1: 6 on other than fair faces ofbrick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified. |
| 64 | Preparation of new plastered surface of wall including cornices pilaster etc, and applying two coats of distemper oil emulsion over and including priming surface, complete as specified and directed. |
| 65 | Dismantling mild steel work of any description ,complete all as specified and directed. |
| 66 | Dismantling timber scantling 40 Sqcm and over section in fixed any position complete all as specified and directed. |
| 67 | Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed. |
| 68 | Rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connected plate confirming to Fe 410W (Gde E-250), quality \"A\" complete all as specified and directed. |
| 69 | Rolled Mild steel flat iron for wind tiesfor roofincluding securing bolts, necessary drilling, bolting or riveting etc and similar work conforming to Fe-210 Gde E-165 all as specified and directed. |
| 70 | Second class Hard-wood in scantlings , clean sawn timber framed and fixed, all as specified and directed |
| 71 | Taking down shutter of any description, notexc 1.0 sq.meach , complete all as specified and directed. |
| 72 | Taking down chowkats or frames n exc 1.50 Sqmwith shutters (without taking off shutters from the frame) |
| 73 | 2nd class HW plain, solid straight chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue pinned at joints complete all as specified and directed. |
| 74 | 35 mm thick 2nd class hard woodplain, framed, panelled shutters (any number of panels) with panels of timber flat on both sides (feather edged) or of veneered particle board, medium density, wood particle board with commercial face veneered supplied & fitted to chowkat complete all as specified and directed. |
| 75 | 30 mm thick 2nd class hard woodglazed and skeleton shutters, open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or rounded, mitred and rebated shash bars, any numbers, edges of framing plain, chamfered or rounded fitted with cut and mitred beads for securing glass etc, sizes of members of shutters, supplied & fitted to chowkats complete allas specified and directed by engr in charge. |
| 76 | 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed. |
| 77 | 75 mm long mild steel butt hinges, medium weight, cold rolled and fixed complete all as specified and directed. |
| 78 | 150mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 79 | 100mm long aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 80 | 150 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed. |
| 81 | 100 mm long aluminium handles, cast type, anodised and fixed complete all as specified and directed. |
| 82 | 250 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and directed. |
| 83 | Preparation of wood and wood based surfaces of any description not otherwise described over 10 cms width or girth and applying 2 coats of synthetic enamel paint over a coat of pinkprimer all as specified and directed. |
| 84 | Figured glass pin headed type, 3mm thick, glazing with oil putty or wooden beads in squares not exceeding 0.50Sqm in each pane, complete all as specified and directed. |
| 85 | Preparation of steel & Iron surfaces, width or girth exceeding 10cm & apply two coats of synthetic enamel paint of 1st quality over a coat of red oxide zinc chrome complete all as spd & directed. |
| 86 | Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 as specified & directed. |
| 87 | Plain cement Concrete 1:3:6 type-C1 (using 20mm graded crushed stone aggregate) as in copings, hold fasts plinth band, bed blocks, benching and like slightly rounded or chamfered angles as directed including necessary form work, complete all as specified. |
| 88 | Preparation of old surfaces of plastered or unplastered and applying one coat of white wash on walls complete all as specified and directed. |
| 89 | Preparation of old surfaces of plastered or unplastered and applying one coat of cement base paint on wall and AC sheet roof surfaces (any tint) all as specified and directed |
| 90 | EM PORTION:-Taking down carefully copper/aluminium point wiring for light, bell socket power socket etc complete with boards, outlet boxes fittings and fixtures such as switchs, sockets, lamp holders bracket,ceiling rose, celing fan etc and making good disturbed surfaces of walls, floor etc complete all as required. |
| 91 | M&L for point wiring with two single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable and one single core 1.5 sqmm (nominal cross section area) FRLS PVC insulated unsheathed multistranded copper conductor cable as earth continuity to common earth dolly running in and including PVC casing & caping (ISI marked) of suitable size with PVC boards of approporiate size and all requisite accessories such as PVC elbow, Tee, collars, bends etc with PVC terminals box& cover for mounting switches, sockets, fan regulator etc complete all as specified and as directed for the following:- |
| 92 | One light/fan point controlled by one, one way switch complete all as specified and directed. |
| 93 | One socket outlet 5 pin 6 Amps on same board complete all as specified and directed. |
| 94 | One socket outlet 5 pin 6 Amps on independent board complete all as specified and directed. |
| 95 | All as per item No. 91 above but with two 2.5 sqmm size cable as phase and neutral and one 2.5 sqmm size cable as earth continuity for 15/20 amp socket outlet on independent board |
| 96 | All as per item No.91 above but for one bell/buzzer point controlled by one push button on the same board with other switches or independent |
| 97 | Modular switch one way 6Amp ISI marked complete all as specified and directed |
| 98 | One bell push, flush type, 5 amp complete all as specified and directed |
| 99 | Modular switch one way 16 Amp ISI marked complete all as specified and directed. |
| 100 | Modular switch outlet 3 & 5 pin, 6 Amp ISI marked complete all as specified and directed. |
| 101 | Modular socket outlet 2 in 1 , 6 pin, 6 and 16 amp flush type ISI marked complete all specified and as directed |
| 102 | Ceiling rose, 3 terminal surface bakelite 65x50mm complete all specified and as directed |
| 103 | Taking out old unsv ceiling fan from site of capacity 1200/1400 mm sweep and replacement withceiling fans complete with blades, down rods, and accessories, 230 V, 1200 mm sweep, min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC)incl all connecting accessories complete all as specified and directed by Engineer-in-charge. |
| 104 | Modular white cover plate with frame 6 module complete all as specidied and as directed |
| 105 | Modular white cover plate with frame 3 module complete all as specidied and as directed |
| 106 | Modular white cover plate with frame 2 module complete all as specidied and as diected |
| 107 | Modular metal flush box 6 module complete all as specidied and as diected |
| 108 | Modular metal flush box 3 module complete all as specidied and as directed |
| 109 | Modular metal flush box 2 module complete all as specidied and as directed |
| 110 | Supply and Fix in repair SARVO home pressure system 0.5HP self priming pressure pump 1 phase 220V, 2850 RPM complete all as specified and directed |
| 111 | Supply and Fix in replacement of inverter LED batten 20 W with square profile and polycarbonate channel, lithium ion battery with charging time 8 to 10 hours and back up time upto 4 hours complete with all fittings and connecting up with PVC insulated and sheathed, 1100Volts grade, flexible, multistranded 1.0 sq mm copper conductor three core cable complete all as specified and directed. |
| 112 | Supply and Fix in repair LED tube light fittings mirror type with high out put diffuser 2 feet, 10 watt 220 volt AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose completeall specified and as directed. |
| 113 | Supply and Fix in repair ceiling mounting LED light fittings luminaire 600mmx600mm, 35/36 watt, 220v, AC recessed type with high efficiencyy PMMA diffuser soft glare free light complete with driver, holder & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor of suitable size all specified and as directed. |
| 114 | Supply and fix in repair for bedside wall light/reading light 2 W flexible head white light colour 6500kcoomplete all as specified and directed. Make : Philips wall light cat part no. 919215850141 or equivalent |
| 115 | Lamp holder insulated body including inverter LEDlamp 12 watt all as specified and as directed. |
| 116 | Supply and Fix in repair sheet metal enclosure for SPN DBs , 8ways, Double door (IP-43), with neutral link complete suitable for 240 volts,AC,50Hz complete all as specified and directed. |
| 117 | Supply and fix in repair heavy duty metallic exhaust fan 300 mm sweep 1400 RPM, single phase 230 Volts including all connecting accessories, louvers & frame, fixing nuts/bolts complete and taking out old existing exhaust fan, complete all as specified and directed. |
| 118 | Supply and fix in repair MCB SPN 40-63 Amps 240V, \"C\" series complete all as specified and as directed. |
| 119 | Supply and fix in repair MCB single pole 6 to 32 Amps 240V, 10KA, \"C\" series complete all as specified and as directed. |
| 120 | Supply and fix in repair sheet metal single pole and neutral enclosures with 2 pin plug and socket 240 volts with one single pole MCB 32/20 Amps complete all as specified and as directed. |
| 121 | Supply and fix in repair for earthing complete with galvanized Steel earth plate electrode 600 x 600 x 6.0 mm thick, buried directly in ground (earth pit not less than 2.25 meters below normal ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and incl galvanized earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel and earth wire protected by GI protection pipe light grade 15mm dia connected to main earth wire on pole or controll board GI pipe light grade 20mm bore for watering funnel with wire mesh PCC chamber pit in PCC 1:3:6 type C-1 40mm thick Precast RCC -25 cover reincorced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50m complete all as sprecified and shown in electrical plate No. 3 connected to earthing test point all as specified or indicated including testing on completion. |
| 122 | Piano type switch, 1 way, 6 Amps, flush type, all as specified and as directed. |
| 123 | Socket outlet 2 in 1, 3 pin, 6 Amps,flush type all as specified and as directed. |
| 124 | Switch socket combination 2 in 1, 5 pin, 6 Amps,flush type universal all as specified and as directed. |
| 125 | Switch socket combination 2 in 1, 5 pin ,6 and 16 Amps,flush type universal all as specified and as directed. |
| 126 | Supply,laying ,jointing and testing in repair of Cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armoured,electric power cables(heavy duty) 1100 volts grade with stranded aluminium copnducter of size 10 sqmm 2 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts including cable gland of suitable sizes and aluminium lugs for connection,complete all as specified and directed. |
| 127 | Excavation in trenches not exc. 1.5 m wide and not exc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed |
| 128 | Returning, filling in including spreading, leveling, watering and well ramming excavated soilin layers not exceeding 25 cm thick each, back in trenches after cables have been laid and tested, poles, stays , struts have been erected and tested , all as specified and directed at site |
| 129 | Removing excavated material to a distance not exc. 50 mtr and depositing where directed at a level not exc. 1.5 mtr above the starting point of any type of soil complete all as specified and directed. |
| 130 | Sand cushioning for the purpose of floors and laying of cables including watering and consiolidation complete all as specified and directed. |
| 131 | Supply and laying sub class \"B\" bricks laid dry flat transversely along the length of cable with widht equal to the length of bricks over sand cushioning as protection cover of cablescomplete all as specified and directed. |
| 132 | GI pipelight grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc complete all as specified and directed. |
| 133 | Electronic step regulator (speed regulation in 5 steps) , 100 watt capacity , suitable for ceiling fan 1200 / 1400 mm sweep complete all as specifiedand as directed. |
| 134 | S&F in replacement connecting, and commissioning ofstreet light fitting 35 watt LED, IP-65 protection, single peice pressure die cast aluminiumhousing high grade powder coated finish with heat resistant toughned clear glass cover for lamp and control gear compartmentwith high voltage surge protection device up to 5 KV, prewired including three core PVC insulated , sheathed 1.5 sqmm multistranded aluminium conductor with 2 core 1.5 sqmm pvc insulated cable from junction box to light fitting complete all as specified. |
| 135 | Street light bracket made out of GI tubing 40mm bore,light grade, 1.5 metre long bent to shape as directed, including suitable MS clamp of F.I. 50 x 6mm with MS bolts, nuts and washer fixed to steel tubular pole/PCC pole duly painted with two coats of aluminium paint complete all as specified and directed. |
| 136 | S&F in Replacement sheet metal enclosure for SPN DBs , 12 ways, Double door (IP-43), with neutral link complete suitable for 240 volts,AC,50Hz complete all as specified and directed. |
| 137 | LED lamp, CDL 9 watt, B22 base, complete all as specified and directed. |
| 138 | 35 watt LED , 230Volt, AC out door type pre-wired, IP 65/66 protection, in building security light fittings, with high pressure die cast aluminium housing and heat resistant complete with driver, lamp bracket complete all as specified and as directed. |
| 139 | S&F in Replacement sheet metal enclosure for SPN DBs , 4 ways, Double door (IP-43), with neutral link complete suitable for 240 volts,AC,50Hz complete all as specified and directed. |
| 140 | BLDC Five star rated Ceiling fans complete with blades, downrods, electronic regulator and accessories, 230V , 1200 mm sweep, with Minimum air delivery 210 CFM . |
| 141 | Supply,laying ,jointing and testing in repair of Cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armoured,electric power cables(heavy duty) 1100 volts grade with stranded aluminium conducter of size 16 sqmm 4 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts including cable gland of suitable sizes and aluminium lugs for connection,complete all as specified and directed. |
| 142 | Supply and fixing in replacement GI pipelight grade 40 mm bore for cable protection fixed on poles or laid in trenches, under floor, ducts etc with fixing clamps, nuts bolts etc complete all as specified and directed. |
| 143 | Supply & install steel tubular swaged poles Type 410 SP-31 (9 metres long) complete with CI base plate and finial including foundation, coping and necessary earth work complete all as specified. |
| 144 | Supply and fix GI bracket of 40 mm dia light grade incl 02 Nos of clamp, nut & bolts etc. complete all as directed by EIC. |
| 145 | Factory made PVC pole mounted street light junction box, three phase and neutral, 415 volts, weather proof of size 325x220x150mm depth,accommodated with properly insulated 04 Nos of aluminium busbar of 40 Amps rated current cap, 02 Nos of insulators per each busbar, nut bolts & clamps (25x3) for fixing of junction box etc. and including MCB SPN 6 Amps - 01 Nos, for connecting of security light fittings, with hinged door and locking bolt complete all as directed. Make : Sintex, Model No : GSJB - 3726 or equivalent . |
| 146 | Dismantling of ACSR conductor any type complete all as specified & directed. |
| 147 | Dismantling of insulator any type complete all as specified and directed. |
| 148 | PVC insulated PVC sheathed multi core flexible cable copper conductor 1100 volts grade conforming to IS-694/2010of size 1.5 Sqmm 3 core incl 25 mm PVC conduit from junction box to light fittings connecting up complete all as specified and directed by EIC. |
| 149 | Supply,laying ,jointing and testing in repair of Cable XLPE insulated screened PVC bedded,galvanized steel strip or wire armoured,electric power cables(heavy duty) 1100 volts grade with stranded aluminium conducter of size 50 sqmm 3.5 core, laid in trenches/ducts or fixed to poles/walls or laid under roads/paths/drains/culverts including cable gland of suitable sizes and aluminium lugs for connection,complete all as specified and directed. |
| 150 | All as per srl Item No.149 here in before but 35sq mm 3.5 core |
| 151 | Design, supplying, installing, testing and commissioning LT outdoordouble door type Feeder Pillarl board factory fabricated cubical kiosk type whether vermin proof with locking arrangement and made out of MS sheet 3.15 mm thick suitable size of channel for base complete with 200 Amps ratedaluminum bus bar32 mm thick chamber and cabinet for housing mounting switch disconnection fuze unit metering eqpt prewired with suitable size of copper conductor and duly painted with one coat of red oxide paint and two coat of synthetic enamel paint power coating mounted on PCC (1:4:8) platform commissioning washer chamber and panel board fixing an angle iron frame which is made out of 40 x 40 x 6 mm thick angle iron duly marked the incoming outgoing controls and comprising with the following:-(a) MCCB 200 Amps capacity 25 KA 4P, 415 volt - Nos -01 No (incoming) (b)Out going- MCCB 160 Amps capacity , 25 KA, 4P = 02 Nos(c) Digital Ammeter flush pattern type square dial96 X 96 mm along with selector switchand suitable CT ratio. (d) Digital Volt meter flush pattern type square dial 96 X 96 mm along with selector switch. |
| 152 | S&Fin replacement of bushbar chamber TPN BBC, bushbar made of aluminium 200 amp with 4 outgoing ways all as specified and directed by engineer in charge.angle iron rod for support and for fixing 40 cmm above ground level.with mccb 125 amps. |
| 153 | Providing plain cement concrete (1:4:8) Type D-2 using 40 mm graded aggregate for mass fillingof poles complete allas specified and directed at site. |
| 154 | Providing plain cement concrete (1:2:4) Type B-1 using 20 mm graded stone aggregate for coping of poles including necessary form work complete allas specified and directed at site. |
| 155 | Excavation in trenches not exc. 1.5 m wide andexc. 1.5 in depth for foundation of poles, stay assy etc. and getting out in hard / dense soil complete all as specified and directed. |
| 156 | Supply and fixing DWC HDPE pipe for protection of power cable (orange in colour) of size 50 mm dia complete with fittings and including cutting, jointing and clamping all as specified and directed. |
| 157 | Supply and fixing in repair of Rigid non-metallic PVC conduit of size 25 mm external dia including all accessories used for fixing of conduit on wall ,ceiling etc complete all as specified and directed. |
