|
| 1 | Dismantling PVC water tanksExc 250 ltrs but not 500 ltrs including taking down of float valve and removing from site complete. |
| 2 | S&F1000 Ltrs capacity double layer (ISI marked) rotational moulded polyethylene water storage tanks, (cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I complete. |
| 3 | S&F in repair ball valve/float ballhigh pressure of PTMT 20mmwith epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed minimume weight 210 gm etc all as specified and directed. |
| 4 | Taking up or down existing steel tubing and connection complete for following sizes:- |
| 5 | (a)15 mm dia |
| 6 | (b)20 mm dia |
| 7 | Supplying, fixing, jointing and testing galvanised steel water tubing medium grade with all fittings such as bend, elbow, socket reducer etc fixed to walls and ceilings or laid in floors, complete for the following sizes: - |
| 8 | (a)15mm dia bore |
| 9 | (b) 20 mm dia bore |
| 10 | Dismantling of floor hearth or wall tilling including cement mortar bedding (but not backing) and rubbish of the premisses complete all as specified and directed. |
| 11 | M&L glazed ceramic coloured tiles size 300mm x 450/300x200 mm x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cementmortar 1:4 complete all as specified and directed. |
| 12 | M & L for vitrified cerameic tiles 9 to10mm thick light shade (square/rectangular )polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed in cement mortar 1:6 complete all as specified and directed. |
| 13 | M & L25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including finishing surface of concrete topping even and rough complete as in levelling work etc complete all as specified and directed. |
| 14 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar complete all as specified and directed |
| 15 | M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill ofparapit wall over12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colouras per direction of GE complete all as specified and directed. |
| 16 | M & L 22 - 25 mm thick machine cut Kota stone slab in flooring or treads single piece of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab including rubbing complete all as specified and as directed.Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above. |
| 17 | Description all as per ser item No 12.00 above but as in skirting or vertical surfaces including 10 mm thick rendering in cement mortar 1:4, complete all as specified and as directed. |
| 18 | Taking down chowkhats or frames not exc 1.5 sqm each without taking off shutter from the frame complete all as specified and directed. |
| 19 | Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter frome the frame ) complete all as specified and directed. |
| 20 | S & F 125 x 60 mm size Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate,hold fast include etc., complete as specified |
| 21 | S & F 105 x 60 mm size Pressed steel frames for door with one or more rebates including necessarylugs, hinges, lock strike plate,hold fast includeetc., complete as specified |
| 22 | M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work as specifed etc complete all as specified and directed. |
| 23 | M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (featheredged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed. |
| 24 | S & F 2 nd class hard wood35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24(a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately inrespective supply only item. |
| 25 | S & F PVC solid factory made door frame of size 50 mm x 47 mm made out of 5 mm thick plain colour PVC sheet reinforced with MS square tubecomplete all as specified and directed. |
| 26 | S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MSframe shall be covered with heat molded plain colourPVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2004 complete all as specified and directed. |
| 27 | S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete . |
| 28 | S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed. |
| 29 | S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed complete all as specified and directed. |
| 30 | S & F 150 mm size aluminium handles cast type, anodised ISI marked complete all as specified and directed. |
| 31 | S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed complete all as specified and directed. |
| 32 | S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame /wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good complete all as specified and directed. |
| 33 | S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed. |
| 34 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 35 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 36 | M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ;barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified. |
| 37 | M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 38 | M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed. |
| 39 | S & F in repairs Galvnised mild steel wire cloth, 0.56mmconforming toI Snominal dia of wire and average width of aperture 1.18 mmand fixed with tinned tacks, wooden beads or galvanised wire staples etc complete all as specified and directed. |
| 40 | M&L Brick work with fly ash brick straight or curved on plan exc 6m mean radius built in cement mortar 1:6 including demolition of brickwork complete all as specified and directed |
| 41 | M&L forrendering in cement mortar (1:6) 10mm thickfirst coaton fair faces ofbrick walls or concrete surfacesand in cm 1:4 5mm thicksecond coatoverfirst coat , mixed with water proofing compound as per manufacturer instructions, finishe fair andevenwithout using extra cementcomplete all as specified and asdirected incl taking down existing plaster. |
| 42 | Supply only Integral water proofing compound |
| 43 | M&L for rendering 10mm thick plastering in CM (1:6) finished even &fairall as specifiedincl taking down existing plaster complete all as specified and directed. |
| 44 | Complete removal of old treatment on internal surfacesby scrapping , and washing etc complete all as specified and directed. |
| 45 | M&L forapplying 1 mm Avg thick wall care putty on wallon internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed |
| 46 | M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall all as per specified and directed. |
| 47 | Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness (below or above ground level complete all as specified and directed. |
| 48 | M&L for PCC 1:3:6 type C2 using 40mm stone graded aggregate 75mm thick as in plinth protection, finished concrete surfaces even and smooth without using extra cement complete all as specified and directed. |
| 49 | S & F in repairsSink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mmcomplete all as specified and directed. |
| 50 | S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.Note :- Pillar tape shall be measured as supply only under respective item |
| 51 | S & F in repairs 15 mm dia bore pillar tap cast copper alloywith capstan heads chromium plated screwed down high pressure with orwithoutlettered ‘HOT’ or‘COLD’ with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed. |
| 52 | S & F in repairs 10 Ltr capacity,PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed. |
| 53 | Supply only PVC connection pipe 15 mm dia 450mm long with PTMT nut at both ends complete all as specified and directed. |
| 54 | S&F in repair 600mmx450mm mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed at site. |
| 55 | S & F (in repair) brass chromium plated angle cock 15 mm dia screwed for iron pipeor brass ferrule, complete. Make : Plumber Cat No FLP-0507/Prayag Cat Part No 7810/ Jaquar Cat Part No CQT-23059 complete all as specified . |
| 56 | S & F in repair brass chromium plated towel rail 20 mm outer dia Brackettype, 60 cm long between flanges with and including chromium plated brass screws and wooden / plastic cleats, complete. Make : Plumber Cat part No U-0911/Prayag Cat Part No BA-10/Jaquar Cat Part No AQN-7711 complete all as specified and directed. |
| 57 | S & F in repair over head shower with arm & flnge of chromium plated with or withoutswivel joints, any size, including fixingto 15mm dia steel pipe for required lengthor union Make: Plumber Cat part No.ITP-2401/Prayag BOS-90 Cat Part No SHP-524/Jaquar Cat Part No OHS 1989 complete all as specified and directed |
| 58 | S&F in repair 15 mm dia consealedtype stop valves, cast copper alloy, chromium plated, screwed down, high pressure with handle, screwed both ends for iron pipe or union complete all as specified and directed |
| 59 | S&F in repair 15mm diaBib tap chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed. |
| 60 | S&F in repairs powder coated steel peg set having 06 Nos spikes fixed to wall complete all as specified and directed |
| 61 | S & F in repair PVC bath cabinet box mirrortype with shutter complete all as specified and directed. |
| 62 | S&F harrison rail/curtain rod, mild steel chromium plated with fixing bracket, stops and complete fitment all as specifed and as directed. |
| 63 | S & F in repair cornershelf of 300 mm size with ABS brackets complete. Make :Prayag Cat No - BEA - 52 or equiilent ofJaquare CAT NO - CAN-1173/Plumber CAT NO- U-0921 complete all as directed and specified. |
| 64 | S & F in repair Gun-metal, globe of gate balve /flush cock of 20mm bore with iron wheel head, screwed both ends for iron pipe etc all as specified. |
| 65 | S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement complete all as specified and directed. |
| 66 | S & F in repair110 mm dia bore. PVC (SWR) pipes single socketed in any length withrubber ring joints,laid in floor/ trenchescomplete all as specified and directed. |
| 67 | S & F in repair75mm dia borePVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenchescomplete all as specified and directed. |
| 68 | S & F in repair110 mm dia bore. PVC (SWR) pipes single socketed in any length withrubber ring joints,fixed to wallscomplete all as specified and directed. |
| 69 | S & F in repair75mm dia borePVC (SWR) pipes single socketed in any length withrubber ring joints, fixed to wallscomplete all as specified and directed. |
| 70 | S & F in repair 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 71 | S & F in repair 75mm dia borePVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed. |
| 72 | S & F in repair110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 73 | S & F in repair75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed. |
| 74 | S & F in repair110 mm dia bore PVC (SWR) vent cowlrubber ring joints, fixed complete all as specified and directed. |
| 75 | Demolition of reinforced cement concrete of any description for manhole cover, slab of septic tank & soak well etc complete. |
| 76 | M & L providing pre-cast cement concrete 1:2:4 typeB-1 using 20 mm graded stone aggregate as in cover slab of manholes, septic tank, soak well etc set in cement mortar 1:4 with plain fair faces including chamfered weathering, throating etc including necessary use and waste of form work complete all as specified and directed. |
| 77 | S & F mild steel TMT bars 10 mm dia and over as in reinforcement, cut to length, benty to shape required including cranking, bending, spirally for hooping for columns, hooking ends and hinding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 78 | S & F Joist channel, angle or tee, square or rectangular tubler sections fixed independently or as purlin, rafter or post incl cutting to dead length where required notching drilling firing riveting and/or welding or connecting with bolts and nuts providing and fitting angle cleats fish plates, gusset plates etc complete all as specified and directed confirming to steel (Fe-410-W (gde-E-250) quality A) |
| 79 | Treating the soil under the plinth protection at the rate of 5 litre of emulsion per square metre of surface area.complete all as directed and specified. |
| 80 | S & F Pre-painted galvalum aluminium zinc coating steel based corrugated steel sheet 0.50mm thick (total coated thickness) of any colour having tensile strength of 550 as in roof coverings / cladding to wall, fixed with self tapping screws including dismentaling of sheets etc complete all as specified and directed. |
| 81 | M&L for preparationold decorated surface of wall/ceilling to be done by mechanical means/smart painting technique coats of acrylic latex base exterior grade (100% ACRYLIC) over a coat of primer at any height including necessary scaffolding complete alongwith five year warrantly complete all as specified and directed (Make:- Asian Paints Apex/ Dulux Weather Shield or equvalent).Note:- Painting work shall be executed through authorized and certified applicator of paint manufactures of paint companies. 2. Approval shall be obtained from GE for make/manufacturers and applicator before engagement in the work. 3. Contractor shall provide five year writtenguarantee certicate for the paint work. |
| 82 | M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed. |
| 83 | S&F in repairs shelf glass assembly consisting of 5.5 mm thick sheet glass shelf 120 mm wide with CP bracket guard and railing 600 mm long all as specified and directed. |
| 84 | M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over of redoxide zinc chrome coat complete all as specified and as directed. |
| 85 | Dismantling of Wallandceilingboards(fibre, pulp, insulation, etc.) or insulationboards/slabs/ blankets, any thickness, including cover fillet complete. |
| 86 | S & F for Anodised aluminium snap grid size (605mmx605mm) frame work for false ceiling with Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified. |
| 87 | M & L for Exposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600 mm x 600mm grid (Frame work for ceiling shall be measured and paid separately) complete all as specified. |
| 88 | Taking down copper /aluminium point wiring (light, fan, bell,socketor power) complete including fixture and fittings such as switches , ceiling roses , pendent , regulators, sockets, light fitting etc.Removing materials to store for keeping in safe custody or for taking credit (credit a for above items should be made as per condition seperately) and making good distrubed surfaces ofwalls, floors etc complete all as specified and directed. |
| 89 | Taking down old/unserviceable distribution board by disconnection of electric connection carefully SPN DBs/TPN DBs/ Main Switch including old unserviceable MCCBs/ MCBs, Isolators, etc and making good to disturbed surface all as specified and directed at site. |
| 90 | M&L point wiring with 1.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 1.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module,for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for the following complete for One light / fancontrolled by one, one way switch 5/6 Amps all as specified and as directed . |
| 91 | Description all as per ser item No. 86.00 above , but for one 3 pin, 5/6 amps socket outlet point on independent boardcontrolled by one, one way 5/6 amps switch all as specified and directed. |
| 92 | Description all as per ser item No. 86.00 , but for one 3 pin, 5/6 amps socket outlet point on same boardcontrolled by one, one way 5/6 amps switchall as specified and directed. |
| 93 | M&L point wiring with 2.5 sqmm (nominal cross sectional area) single core, PVC insulated, unsheathed FRLSH copper cable, 1100 volts grade, with multi stranded copper conductor drawn through and including non-metallic, rigid non mettalic PVC conduit (medium grade) concealed in wall / ceilingwith and including 2.5 sqmm single core PVC insulated, multistranded, unsheathed, FRLSH copper conductor cable as continuous earth continuity conductor (green in colour) with cast Iron / pressed steel modular terminal boxes any size/module, conceiled on walls and fixed by neans of brass screws incl modular cover plates and cover frme any size/module,for mounting or housing switches, socket outlets, fan regulators, etc. including all other fixing accessories for one 15A socket point independentcompleteincl taking down of old unsv point wiringall as specified and directed. |
| 94 | S&F in replacement of Ceiling rosethree terminals surface bakelite type, AC, 50 HZ, 230V complete all as specified and directed. |
| 95 | S & F modular switch1 way 6 A , 1 modulecomplete all as specified and directed. |
| 96 | S & Fmodular socket 6 Amps 2/3 pin combined2 module complete all as specified and directed. |
| 97 | S & Fswitch modular type 16 A, 1 module complete all as specified and directed. |
| 98 | S & F socketmodular type multipurposes 6/16 A, 2 module complete all as specified and directed. |
| 99 | S&F surface /wall mounted LED batten fiitng slim channel type poly carbonate bodyT-8 tube light luminare with system efficiency 120 lumens per watts. High quality polycarbonate end cap in white finish and snap fitted to the housing completeall as specified and directed.integrated electronic driver complete with all connectedaccessories all as specified and directed. |
| 100 | S&F MCB DB SPN 8 way ,IP-43, IK 09, double door type with metal doorwith 200 Amps rated bus bar ,230 volts, 50 Hz complete all as specifed and directed. |
| 101 | Supply & FixMCB SPN 32 Amps current rating \"C\" series 10 KA breaking capacitycomplete all as specified and directed. |
| 102 | Supply & FixMCB SP 6 to 32 Amps current rating \"C\" series 10 KA breaking capacitycomplete all as specified and directed. |
| 103 | Taking down existingceiling fan of any sweep after disconnecting necessary connection from ceiling rose to fan and deposit to MES store yardcomplete all as specified and as directed |
| 104 | S & F for ceiling fan, 230 Volts, 50Hz, 1200 mm sweep with down road, canopy, blades, BLDC motor etc and service value of the fan shall be greater than 6.1 as per BIS with necessary accessories and electrical connections from ceiling rose to fan teriminal includingwritting the MES Number with synthetic enamel paintcomplete all as specified and as directed. |
| 105 | Supply and laying and testing Cable XLPE insulated, screened , PVC bedded galvanised steel strip or wire armoured electric power cable (Heavy duty) 1100 volts grade with stranded aluminium conductor of6 sqmm4 core all as specified and as directed. |
| 106 | Excavation in trenches, n. exc. 1.5 m wide and n.exc 1.5 m in depth ;for foundation, etc or for shaft, well, cesspit, manhole, pier holes etc.n. exc. 10 sq m on plan and n. exc. 1.5 m in depth and getting out soft/loose soil all as specified and as directed. |
| 107 | M&L fine sand cushioningfor cable protection in layers incl punning all as specified and directed.Note : Punned down thickness shall only be measured. |
| 108 | Supplying and laying un-reinforced precast concrete cable cover, Class LV, Type I, flat, size 250 mm x 150mm x 40mm all as specified and as directed. |
| 109 | S & F tubes, \"light grade,galvanised, with all fitting of size 40 mm laid in trenches for cable protection all as specified and directed. |
| 110 | Returning, filling in, trenches including spreading, levelling watering and well ramming in layers not exceeding 25 cm Soft / loose soil all as specified and as directed. |
| 111 | Removing excavated soil to a distance not exc 50 m and depositing where directed at a level not exc1.5m above the starting point all as specified and as directed. |
| 112 | M & L for earthing complete with galvanized steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried directly in ground vertically (earth pit not less than 2.25m deep below ground level) with top edge of the plate not less than 1.50 mtr deep below normal ground level, connecting to GI earth wire 4mm dia by means of bolts, nuts, check nuts, and washers of galvanized iron or steel including 15 mm dia. medium grade protection pipe for earth lead complete with charcoal and common salt including watering arrangement with galvanized iron pipe light grade 20 mm dia, PCC Chamber, CI frame and cover, MS funnel with wire mesh all as shown in electrical plate no 3 of SSR part I including excavation and earthwork in any type ofsoil/strata and testing on completion. Note:- GI earth wire 4 mm dia and 15 mm dia protection pipe upto 7.5 mtr from earth plate is deemed to be included in rate quoted complete all as specified and directed. |
| 113 | M&L for LED ceiling fitting 33 to 36 watts, 2 ft x 2 ft fittings suitable for aluminium grid ceiling, lumen out put ≥ 122 lumen/ watt,THD < 10% environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light source,incl inbuilt drivers suitable for Grid ceiling complete with atration of aluminium frame work wherever necessary during installation all as specified and directed. |
| 114 | M&L for MS ERW plane ends pipe of size 100 mm bore heavy as per IS 1239 (Pt-1) 1990 (Re affirmed 1998) 6.0 mm thick incl all accessoried and special such as tees, bends, flanges etc. and welding with pipes and laying, jointing, testing and commissioning in trench or on PCC blockfor pedestral support with one coat of red oxide primer and two coats of Apcolite paint of approved shade complete all specified and directed.Note: Above rates include supply, erection and fixing of civil concrete block (1:2:4) of minimum size 400 x 400 x 400 mm for Pedestral Support for pipe upto size 100 mm including necessary fittings like pipe clamp with anchor fastner, 12 mm U clamp, C channel 75x 6 mm thick with hole fastner etc if not laid in trenches. |
| 115 | M&L for MS ERW plane ends pipe of size 80 mm bore heavy as per IS 1239 (Pt-1) 1990 (Re affirmed 1998) 6.0 mm thick incl all accessoried and special such as tees, bends, flanges etc. and welding with pipes and laying, jointing, testing and commissioning in trench or on PCC blockfor pedestral support with one coat of red oxide primer and two coats of Apcolite paint of approved shade complete all specified and directed.Note: Above rates include supply, erection and fixing of civil concrete block (1:2:4) of minimum size 400 x 400 x 400 mm for Pedestral Support for pipe upto size 80 mm including necessary fittings like pipe clamp with anchor fastner, 12 mm U clamp, C channel 75x 6 mm thick with hole fastner etc if not laid in trenches. |
| 116 | Supply and fix fire hydrant stand post 80 mm dia GI/MS upto 1.5 metre both flanged type with provn of single outlet conforming to IS 908 as per requirement at site complete all as specified and directed. |
| 117 | Supply , Erection, Testing & Commissioning MS Hose Box duly painted red from outside & white paint inside to accommodate 2 hose pipe of length 15 meter each, nozzle,coupling & Branch pipe complete with glass , allen key lock etc.,size800 x 600 x 250 mm including fixing arrangment on the ground/along wall with suitable capacity nut, bolts, washer etc complete all as specified and directed. Note : The cost of items such as supporting pipe, stand, PCC foundation work, metal sheet etc formaking necessary arrangement for fixing hose box at ground or along wall as per site requirement is deemed to be included in quoted rate. |
| 118 | Supply, installaion, testing and commissioning of slim seal type cast iron butterfly valves , bronze/ Gun metal seat of size 100 mm dia, PN 1.6, lever operated type with necessary flanges, nuts, rubber insertion gaskets, nuts and bolts complete all as specified and directed. |
| 119 | Supply, installaion, testing and commissioning of slim seal type cast iron butterfly valves , bronze/ Gun metal seat of size 80 mm dia, PN 1.6, lever operated type with necessary flanges, nuts, rubber insertion gaskets, nuts and bolts complete all as specified and directed. |
| 120 | Supply, installaion, testing and commissioning of non return valve 100 mm cast iron double flanged conforming to IS 5312 with bolts, nuts, washers, 3 mm thick insertion rubber gaskets complete as reqd. |
| 121 | Supply, installaion, testing and commissioning of Foot Valve 100 mm cast iron for suction branch, double flanged conforming to IS 4038 with bolts, nuts, washers, 3 mm thick insertion rubber gaskets complete as reqd. |
| 122 | Supply and fix Non Rising Spindle Sluice Valve with steel spindle both end flanged including gasket nut bolts washer etc for fixing, ISI mark suitable for pressure rating not less than 7Kg/Cm2 suitable for 80 mm bore ERW pipe complete all as specified and directed |
| 123 | Supply and fix Non Rising Spindle Sluice Valve with steel spindle both end flanged including gasket nut bolts washer etc for fixing, ISI mark suitable for pressure rating not less than 7Kg/Cm2 suitable for 100 mmbore ERW pipe complete all as specified and directed |
| 124 | Supply, installation, testing and commissioning of single hydrant valve of 63 mm dia single headed with instantaneous hose coupling adaptor with ISI mark. confirming to IS : 5290 lim seal type cast iron non return valves with flanges, nuts, bolts and rubber gaskets for seating the valves complete. |
| 125 | Supply, installation, testing and commissioning of hose reel with 30 metre long hose pipe of 20 mm dia conf to IS 5132 leak proof hydraulically tested, corrosion resistant & high quality powder coating for weather resistance alongwith shutoff Nozzle complete all as specified and directed . |
| 126 | Supply ,install, testing and commissioning of controlled percolated hose in 15 M lengthfor internal hydrant landing valvesof of 63 mm dia and tested to bursting pressure of 15 Kg/ Sqcm and with SS coupling as per IS: 901. |
| 127 | Supply and install of branch pipe of 63 mm dia having SS body with hexagonal head of 12.5 mm dia nozzle conforming to IS 903. |
| 128 | Design, Fabricate, Supply, Installing, Testing and Commissioning of Electrical control panel of cubical construction,out door type Wall mounting type / free standing , compartmentalised , sectionailsed , dust , damp and vermin proof with suitable ventillation fabricated out of 3.15 mm thick CRCA sheet and angle iron , spray painted with approved colour shade , suitable for 415V , 50 Hz 3 phase , 4 wire system complete in all respect and confirming to latest revised ISI specifications including necessary connections , inter connections with copper conductor cable of required size , cable end termination , necessary cable tray of requierd size , soldering etc with and including following switch gears mounted thereon as required ( All switch fuse /fuse switch units shall be to AC 230 V duty IS: 4064) complete all as specified and directed.(a) 100 Amps 4P MCCB\"C\" series 01 No as incomming (b) Digital volt meter with selector switch.-01 Nos(c) Digital Ampere meter with selector switch.-01 Nos(d) 63 Amps 4P MCCB\"C\" series 02 Nos as outgoing(e)Aluminium Bus bar three phase with neutral 200 Amp(f) Automatic star Delta starter for centrifugal pump set 25 HP , operataion based on pressure drop on fire lines If the main pump set fails to startwith in 10 seconds, complete all as specified and directed. |
| 129 | Supply installation , testing and commissioning of Electric motor driven fire pumping set consisting of and including the following complette all as specified and directed. |
| 130 | (a) Centrifugal horizondal suction type multi stage pump complete for delivery 1650 Ltr/minute against a total head of 40 Mtrs with and including cast iron casing, bronze impelller and stainless steel shaft directely coupled through flexible coupling with electric motor as required. |
| 131 | (b) Squirrel cage AC induction motor suitable for operation 415V(+/- 10%) three phase , 50 Hz AC supply of not less than 25 HP with synchronomous speed of 2900 RPM ( with permissible slip) . The motor shall have \"B\" class insulation and the enclosure shall be TEFC type confirming to protection class IP 55 of IS: 4691. The motor shall be rated for continuous duty. |
| 132 | (c) Common base plate fabricated out of MS Channel of size 75x150 mm |
| 133 | (d) Suitable RCC pump foundation as per manufactors design with vibration damping arrangement by providing cushy foot or similar mounting as required and tin shed with iron pipe structure for motor and electric panel. |
| 134 | (e) Pressure switches for fire pumps complete with mini ball valve |
| 135 | (f) Pressure gauge complete with mini ball valve and siphon tube. |
| 136 | Supply and fix Gun metal fire brigade inlet connection (Siamese Connection) for connecting to external fire hydrant ring main consisting of two nos 63mm dia instantaneous type male coupling with built in two NRV and cap with chain complete with 80/100 mm dia butterfly valve and flanged outlet complete with all accessories all as specified and directed. |
| 137 | Earthing complete with galvanised steel earth plate electrodesize 600x600x6.00mm thick burried directly in groundvertically in pit of depth not less than 2.25 mtr below normal ground level with top edge of the earth plate not less than 1.5 mtr below normal ground level surrounded from all sides by mixture of charcoal and common salt and electrode connected to and including galvanised iron strip 32X6 mm earth lead by means of bolts, nuts, check nuts and washers of galvanised steel and also including provision of GI pipe light grade 20mm bore for watering, funnel with wire mesh. PCC chamber pit in PCC 1:3:6 type C-1, 40 mm thick precast RCC M-25 (design mix) cover reinforced with 8 mm dia TMT bars @ 10 cm C/C on both sides and handle, excavation and earth work in any type of soil and removal upto 50 m complete all as specified and shown in electric plate No.3 of SSR Part-I(2009), all as specified including testing on completion. |
| 138 | M&L for XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 sq. mm 3.5 core in trenches / under PCC/interlocking tiles incl making good of surface with PCC/ cementing incl connecting to existing LT panel board and Electric Control Panel for firefighting pump set all as directed at site. |
