|
| 1 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, fixed with self tapping screws incl dismantling of old asbestos cement sheets complete all as specified and as directed |
| 2 | S&F Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 MPa as in roof covering/cladding to wall, ridge etc fixed with self tapping screws incl dismantling of old PGI sheets complete all as specified and as directed |
| 3 | M&L for 4 mm thick Non Asbestos , fibre cement building board of size 595x595 mm size in ceiling fixed or laid / inserted to timber / GI/Aluminium framework with screws(Note : GI frame work will be measured and paid for seperately) incl dismantling of old wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness including cover fillet complete all as specified and as directed. (Note : GI frame work will be measured and paid for seperately) |
| 4 | M&L GI powder coated snap grid framework for false ceilingcomprising of the following section for making partion of 600 x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32 mm x 15 mm x0.30 mm, cross tee shall be 32 mm x 15 mm x0.30 mm thick with black lining in mid portion and wall angle shall be 24 mmx24 mm x0.30 mm thick complete all as specified and as directed |
| 5 | Taking down shutter of any description exc 1 Sqm but n. exc2 sqm each complete all as specified and as directed |
| 6 | S&F 35mm thick flush shutter solid core construction with block board core and ply wood face panels, commercial type both sides complete all as specified and as directed |
| 7 | S&F 35mm thick 2nd class hard wood factory made glazed and skelton shutter, open rebated and prepaned to receive glass, gauge etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc sizes of members of shutters complete all as specified and as directed |
| 8 | M&L for applying two coats of synthetic enamel paint to new undecorated wooden surfaces over a coat of pink primer including preparation, over 10cm width or girth complete all as specified and as directed |
| 9 | S&F mild steel framed work such as grills, gratings etc designed with ends of bars shouldered and/or rivited or forged into spikes conforming to Fe - 290 grade E-165 complete all as specified and as directed |
| 10 | M&L forapplying two coat of synthetic enamel paint over a coat of red oxide primer includingpreparation of surfaces on steel surfaces of any description over 10cm width or girth not otherwise described complete all as specified and as directed |
| 11 | S&F 200mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed |
| 12 | S&F 150mm long mild steel barrel tower bolts, stove enamelled black, with bright bolt complete all as specified and as directed |
| 13 | S&F 100mm size mild steel butt hinges medium weight, cold rolled complete all as specified and as directed |
| 14 | S&F 125mm size mild steel pressed handles, oval type, stove enameledblackcomplete all as specified and as directed |
| 15 | S&F 250 mm Aluminium sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and as directed |
| 16 | S&F mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed |
| 17 | S&F floor door stopper ofaluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor 140mm overall length of cover plate complete all as specified and as directed |
| 18 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm single side prelam PVC sheet and edges will be painted to match with the prelam sheet reinforced with MS square tube in opening incl necessary fixing arrangements as per specification and drawing complete all as specified and directed |
| 19 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and both side prelam PVC sheetfor top rail, lock rail and bottom rail on either side as gap insert for top rails, bottom rail, panelling of both side prelam PVC sheet to be fitting in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement in the frame at site as per specification and drawing complete all as specified and as directed |
| 20 | S&F factory made solid panel PVC door wire gauzed i.e. panel will be of wire gauze both side pre-laminated PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S tubes. The wire gauge shall be stretched to tighten firmly partly wired and partly panelled shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails M.S. tube shall be covered with heat moulded wood grain colour PVC \"C\" channels having a pvc sheet strip of 20mm width stuck inside with solvent cement for stiles and wood grain colour pvc sheet for top rail, panelling of wood grain colour pvc sheet to be fitted in the M.S. framed welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined the together with solvent cement, supplying & fixing in the frame at site as per specification & drawing, complete all as specified and as directed |
| 21 | Taking down door / window frame with shutter (without taking off shutter from the frame) area not exc 1.5 sqm complete all as specified and as directed |
| 22 | Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions. |
| 23 | Providing and fixing powder coated aluminium (minimum thickness of powder coating 50 micron) for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws all complete as per architectural drawings and the directions. |
| 24 | S&F for sheet glass 5.50 mm thick tinted quality and glazing complete all as specified and directed by Engineer-in-Charge exc 0.50 sqm in each panel complete all as specified and as directed |
| 25 | S&F 150mm aluminium, anodised, barrel tower bolts of extruded sectioncomplete all as specified and as directed |
| 26 | S&F extruded aluminium alloy handle of size 150mm, fabricated type, anodised complete all as specified and as directed |
| 27 | S&F stainless steel butt hinges 100mm size all complete all as specified and as directed |
| 28 | Hacking out old broken glass (any thickness, size, quality or description) from wooden or steel frames complete all as specified and directed |
| 29 | M&L for 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with cut and mitred beads in squares or triangular n. exc 0.5 Sqm in each pane complete all as specified and directed |
| 30 | S&F 3mm thick figured glass, pin headed typeand glazing with oil putty in squares n. exc 0.5 sqm each pane complete all as specified and as directed |
| 31 | S&F galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed |
| 32 | S&F in repair galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanesed wire staples complete all as specifed and directed |
| 33 | S&F in repair 18/19mm prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screwsas in cupboard shutters and shelves all as specified and as directed |
| 34 | S&F 150mm Hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws all as specified and as directed |
| 35 | S&F Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (When open) 30mm complete all as specified and as directed |
| 36 | S&F in repair 25mm dia drapery rod fancy powder coated fixed to wall with bracket and knobs complete all as specified |
| 37 | S&F in repair door closer aluminium body (extruded section) hydraulically regulated, designation No 3, universal type, complete all as specified and directed. |
| 38 | Roughening surfaces of old concrete floor/terrace by picking incl. taking down existing detoriated / decayed tar felt or any treatment including loose surface, scraping with scraper, chiselling, scraping of surface with wire brush or any other method, sweeping clean & washing down with water to remove dust etc. and removing the scraped materials debris to a distance complete all as specified and as directed |
| 39 | M&L 25mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in roof padding finish surface even and smooth without using extra cement including demolition of PCC in any description complete all as specified and directed |
| 40 | M&L for rendering 10 mm thick in cm 1:4 in horizontal / vertical surface of brick or concrete surfaces using water proffing liquid compound as per manufacturer\"s instruction and finishing surfaceseven & fair without using extra cement. complete all asspecified and directed. Note: water proofing liquid will be measured and paid separately. |
| 41 | Material & labour for provision of water proofing treatment by using APP torch on mineral/plain finished membrane over roof and vertical surfacesincluding preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq mon clean and dry surface and then providing APPmembrane having non woven. polyester film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m andfinished on top with mineral/slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps respectably complete all as per manufacturers compound complete all as specified and directed. |
| 42 | Supply only liquid integral water proofing admixture of make pidilite or its equivalent complete all as directed. |
| 43 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs. 46,400.00] |
