Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified & directed. |
| 3 | Demolition of cement concrete (unreinforced)Roof , Floors (other than Ground floors), Beams, staircase,landing,chajjas and similar suspended work complete all as specified & directed. |
| 4 | Demolition of cement concrete (Re-inforced) of any description and in any position not otherwise specifically provided for complete all as specified & directed. |
| 5 | M & L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc including brushing with neat cement slurry with 3.0 Kg of cement per Sqm complete all as specified & directed. |
| 6 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), rubbish off the debris out of MOD premises complete all as specified and directed |
| 7 | Taking down cement plaster/wall tiles including backing etc from brick/stone walls / concrete surfaces including raking out joints,hacking for key , scrubbing down with water etc complete all as specified and directed |
| 8 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) not exc. 1.5 Sqm each, complete all as specified & directed. |
| 9 | Taking down chowkats or frames including shutters (without taking off shutters from the frame) exc. 1.5 Sqm but n exc 4.0 sqm each, complete all as specified & directed. |
| 10 | Taking down shutters of any description exc. 1 sqm and not exc. 2 Sqm each, complete all as specified & directed. |
| 11 | Taking down, easing and adjusting shutters of any description, exceeding. 1.00 Sqm and not exceeding 2.00 Sqm each and re-fixing in the sameor other opening complete all as specified and directed. |
| 12 | Taking up or down steel tubing of 20mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 13 | Taking up or down steel tubing of 15mm bore pipe and connection laid in trenches or floors or fixed to walls and including cleaning for refixing or removal to store with all fittings, complete all as specified and directed. |
| 14 | Dismantling of plain or corrugated AC sheeting, any gauge, thickness, including ridge etc as in roof covering complete all as specified & directed. |
| 15 | Taking down eaves gutters and rainwater pipes(any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store complete all as specified and directed. |
| 16 | M&L for rendering or plastering work 10mm thick in CM 1:3 with WPC @ 0.200 ltr in 50 Kg of cement in fascia or edging of chajjas, ceiling and roof proIections etc, including taking out peeled off plaster / concrete incl roughening old concrete surface and making the line in true shape and finishing the surface (without using extra cement) complete all as specified & directed. |
| 17 | M&L 15 mm thick rendering in(cement mortar 1:4) mixing with WPC @ 200 ml/ bag of cement on brick or concrete surfaces and finished even and smooth without using extra cement complete all as specified & directed. |
| 18 | M&L 15mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:6) finished even and fair without using extra cement complete all as specified & directed. |
| 19 | M&L for Brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 complete all as specified. |
| 20 | Material and labour for complete removal of existing treatment on wall and ceiling roofs etc by scraping with mechanical sander having mechanical vaccum mechanism, sanding pad of grit 80 to make free from dust ,paint by skilled labour and applying two coats of oil emulsion distemper with fully automatic airless spray machine paint application with flow speed minimum one ltr per minute having a pressure 3300 PSI overa new or old untreated plaster surface finish with one coat of primerover 1 mm thick wall care putty complete all as specified. |
| 21 | Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm incl complete removal of existing treatment surfaces incl 1 mm thick wall putty over old or new plastered surface to prepare the surface even and smooth complete all as specified and directed. |
| 22 | M&L for light shade vitrified tiles 8 to 9mm thick (Square or rectangular) polished, area of each tile not exceeding 0.36 sqmin floor etc set and Iointed(Ioint free) in neat cement slurry and pointed in coloured cement. including 15mm thick screed bed in CM (1:6) and finished rough etc complete all as specified and as directed. |
| 23 | M&L for light shade vitrified tiles 8 to 9mm thick (Square or rectangular) polished, area of each tile not exceeding 0.36 sqmin skirting etc set and Iointed(Ioint free) in neat cement slurry and pointed in coloured cement. including 10mm thick renderingin CM (1:4) and finished rough etc complete all as specified and as directed. |
| 24 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square/rectangular) in floor etc area of each tile exceeding 0.11 sqmbut not exceeding 0.18 sqm, set and Iointed in neat cement slurryand pointed in white or coloured cement to match over and incl 15mm thk screed bed in CM 1:6all as spd and directed. |
| 25 | M&L for glazed ceramic coloured tiles of size 450mmx300mm, thickness 7mm as in vertical surfaces such as skirting, dado, wall etc., set and Iointed in neat cement slurry and pointed with coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified & directed. |
| 26 | M&L for Machine cut kota stone slab flooring 18 to 20 mm thick over cement screed base laid and Iointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing completeIointed in neat cement slurry and pointed in white or coloured cement to match over and incl rendering 10mm thick in CM (1:4) on brick or concrete surface complete allas spd & directed. |
| 27 | M&L for machine cut Kota stone slab not less than 16mm thick as in riser of steps, skirting, dado and pillar laid over& including 10 mm thick screed base in CM 1:4 and Iointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing to yield mirror finish with machine, complete all as specified. |
| 28 | M&L for Granite (of any type ) work20mm thick (table rubbed and polished) in cooking plateform, window cill, Iambs, steps and like in CM 1:4 over and 15 mm thick screed in Cm 1:6 incl pointing in white cement (1:2) using marble dust with admixture of pigment to match with Granite shade including rounding the exposed edege full round complete all as specified and as directed. |
| 29 | M&L Cement concrete type C-1, 1:3:6 (using 20mm graded aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair incl making Ioints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified |
| 30 | Taking down existing roof treatment of any description incl mud phuksha or PCC padding if any (any no of layers) including removal to debries in low laying area exc 1.00 KM but n exc 2.00 KM complete all as directed. |
| 31 | M&L for 25 mm thick (avg thickness)cement concrete 1:1.5:3 type B-0 (using 12.50 mm graded stone aggregate) with WPC and GI wire netting of size 0.71 mm dia of wioreand avg width of aperature 25 mm of as in floor by maintaining required gradient / unddulation, finished even and fair as in roof padding including preparation of surface and mix with water prrofing compound and finish even and fair without using extra cement, complete all as spd and directed. |
| 32 | The surface shall be rendered clean prior to application of smart care damp proof ultra. Wire brushing shall be done so as to get rid of any kind of loose material and debris. The surface shall be free from oil deposits laitance etc. Supplying & treating the cracks up to 3 mm width with a single pack fibre glass reinforced crack filling compound smart care crack seal or equivalent etc complete as per manufacture specification. |
| 33 | M&L for 20mm thick cement plaster in cement mortar 1:4 on concrete surface finished even and smooth using WPC liquid of make mentioned in Annexure-I to particular specification as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed. |
| 34 | Material and labour for preparation of surfaces and apply first of coat Fiber reinforced elastomeric liquid water proofing membrane formulated with PU hybid polymers and reinforcing acrylic fibers with Sun Reflective Index (SRI) of 100-110,having minimum elongation of 350%,tensile strength of 2.9 Mpa and shall have cracks bridging ability upto 2.5 mm and shall resist 10 bars of hydrostatic pressure & reduce surface temperature upto 10 degree Celsius with 33% dilution of priming coat.Laying of Fibre mesh of 0.3 mm thickness weavo in leno pattern having 45 gsm /sqm and pasting it properly with overlap of 50 mm and allow it dry . Apply scond of undiluted coat @ 0.45 ltr /sqm .Apply third and final coat undiluted @0.45 ltr/sqmcomplete application to be done by the manufacture or authorised applicator complete all as directed by Engr-in -Charge |
| 35 | M&L for Providing precast cement concrete 1:2:4, type B1(20 mm graded aggregate) set in CM 1:6, as in cover slabs for wash basin plateformetc with plain fair faces casted in angle iron frame(Angle iron frame measured and paid separetaly)complete all as specified and directed |
| 36 | M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified. |
| 37 | Supply & fixed110 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wallswith suitable clampcomplete all as specified and directed. |
| 38 | S&F PVC (SWR) bend with ovel accessed door any radius 110mm dia bore complete all as specified and directed. |
| 39 | M&L PVC (SWR) floor trap, dia of outlet in 75 mm, plain excludinggrating, but including jointing with solvent cement fixed in repaircomplete all as specified and directed. |
| 40 | M&L PVC (SWR) floor trap, dia of outlet in 110 mm, plain excludinggrating, but including jointing with solvent cement fixed in repaircomplete all as specified and directed. |
| 41 | Supply & fixed, 110 mm bore PVC (SWR) branch piece , with or without excess door, single (Single Y) equal or unequal.with excess doorcomplete all as specified and directed. |
| 42 | Supply & fixed, 110 mm bore PVC (SWR) branch piece, with excess door, double (double Y) equal or unequal, with or without excess doorcomplete all as specified and directed. |
| 43 | Supply & fixed, 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal,with excess doorcomplete all as specified and directed. |
| 44 | Supply & fixed, 110 mm bore PVC(SWR)junction double, (double T), equal or unequal, with excess doorcomplete all as specified and directed. |
| 45 | Supply & fixed in repair, 110 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints , laid in trenches or in floorcomplete all as specified and directed. |
| 46 | Supply & fixed in repair, 75 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints, laid in trenches or in floorcomplete all as specified and directed. |
| 47 | Supply & fixed in repair, 75 mmbore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls with suitable clampcomplete all as specified and directed. |
| 48 | Supply & fixed , 75 mm bore PVC (SWR) bends any radius, with or without excess doorcomplete all as specified and directed. |
| 49 | Supply & fixed, 75 mm bore PVC (SWR) branch piece, single (Single Y) equal or unequal ,with excess doorcomplete all as specified and directed. |
| 50 | Supply & fixed, 75 mm bore PVC (SWR) branch piece, double (double Y) equal or unequal.withexcess doorcomplete all as specified and directed. |
| 51 | Supply & fixed, 75 mm bore PVC (SWR) junction single, (Single T) ,withexcess door, equal or unequalcomplete all as specified and directed. |
| 52 | Supply & fixed, 75 mm PVC(SWR)junction double, (double T), with excess door, equal or unequalcomplete all as specified and directed. |
| 53 | Supply & fixed, 75 mm bore PVC (SWR) vent cowlcomplete all as specified and directed. |
| 54 | S&F for GIpipe 32 mm dia light grade in short length as spout pipe in sunken floor slab laid in slope to brick wall with PCC 1: 2:4 TYPE B -1completeall as specified and directed. |
| 55 | M & L 15 mm thick plaster in CM 1:4 with intergral water proofing compound and applying 75 mm thick padding and junction coved filling of PCC M-20 Nominal Mix (1:1.5:3) of 12.50mm Agg on the junction offloor and wall the surface shall than he cured and allowed to dry. Apply Epoxy Resins Coating, polymer Modified Cementation coating like brush bond of frsroc,pedilite and bostic as per manufactures instruction both on floor as well as on wall complete all as specified and directed by Engr in Charge |
| 56 | Supply only liquid water proofing compoundcomplete all as specified and directed. |
| 57 | M&L for Cement concrete 1:5:10 type D-2 (using 40mm graded crushed stone aggregate)as in mass filling in sunken slab of toilets, complete all as specified. |
| 58 | Supply and fixing factory made uPVC white colour fixed glazed window/ventilator made of (small series) frame 47 x 50 mm mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension (Area upto 0.75 sqm.) comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I. fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made on this account. |
| 59 | Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between frame and adIacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. Incl Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and required accessories incl fully selected quality glass 5 mm thick with rubber gasket complete. Note : The quoted rates shall includes all other connected accessories and refixing of existing MS grills in the opening after fixing of windows. |
| 60 | S&F of 35mm thick single piece Factory made wire gauge doorshutters including of wire cloth (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of M.S tube 19 SWG, size 19mm x19 mm complete in all respect with lock rail and beautified by PVC beading all around fixed with PVC solvent cement complete all as per Drawing No CEPZ/TD-378/,Sheet 1/1 dated 27/12/2011 complete all as specified and as directed by Engr-in-Charge. |
| 61 | S & F SS wire gauged door shutter, factory made box type hollow section style and rais of size 40mm x 40mm by 2 mm thick .SS wire gauged skeleton shutter with SS with Hollow sction square guard bars of size 15mm x15mm by 2 mm thick incl fixing of shutter to the existing wooden/WPC frames with necessary arrangements and with 04 Nos. SS Butt hinges of required size and SS screws incl fixing of 02 Nos 300 mm long SS sliding door bolt with hasp and staple and 02 Nos 125 mm size SS handles complete all as specified and directed by Engr in charge.Note- SS wire cloth shall be measured and paid separately. |
| 62 | Providing and fixing 35mm thick factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shuttercomprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screwwithdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof,water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer In- Charge. Note: stainless steel butt hinges and necessary S.S screws shall be paid separately. |
| 63 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter Ioints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made on this account. |
| 64 | S & F Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter Ioints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made on this account. |
| 65 | S&F in repair factory made 25mm (+ 0.7mm) thick WPC cupboard shutter/ Shelf / partition,, prelaminated one side with coating of ultra voilet chemical, glossy/mat finish incl. 100% termite/water proof, fire retardant, Eco friendly, density not less than 600Kg/cum finish at all edges for making edges lipping/bending, complete as per direction of Engineer-in-Charge and manufacturer\"s specifications. |
| 66 | Supply and fixing factory made 18mm thick WPC (wood particle composit) sheet one side prelam sheet and other side wood nature colour for cupboard shutter of density 600 kg /Cum bent 90°incl 100% termite/water proof, fire rertradent, Eco friendly, and finish at all edges at level for making edges lippingusing binding tape etc. Complete as per direction of Engr-in-charge, Manufacture specification.Note-Binding tape shall be measured and paid separately. |
| 67 | Supply and fixing factory made 5mm thick PVC sheet one side prelam sheet for kitchen cabinet/cupboard of density 600 kg /Cum bent 90° completeall as specified and directed. |
| 68 | S &F aluminium alloy, anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded setion or cast aluminium alloy and fixed 300 mm long complete all as specified & directed. |
| 69 | S & F anodised aluminium barral tower bolt extruded section 200 mm size complete all as specified & directed. |
| 70 | S & F anodised aluminium handle cast type 125 mm size complete all as specified & directed. |
| 71 | S & F 3mm thick sheet glass ordinary quality and glazing with oil putty or fixed with bead/glazing pins in squares size n.exc 0.5 sqm in each pane including hacking out old broken glass any thickness, size or quality complete in all respect as specified and directed. |
| 72 | M & L for 0.80 mm thick PVC edge binding tape around the 18 to 20 mm thick PVC shutter edge colour as directed, complete all as specified and directed. |
| 73 | S&F 100 mm long aluminium handles for casttype anodisedcomplete all as specified and directed. |
| 74 | S & Fcontinuous (piano) hinges, mild steel, bright finishwidth of flaps (when open ) 40 mm all as specified and directed. |
| 75 | S & F 100mm size hasp and staple, aluminium anodisedsafety type, fixed with screws complete all as specified and directed. |
| 76 | S & F 50 mm dia polished hardwood knobs fixed with screws complete all as specified and directed. |
| 77 | S & F Magnet ball catcher for cupboard shutter, complete all as specified and directed. |
| 78 | S & F for stainless steel plain basket of size 17\"\" x 20\"\" x 8\"\" complete all as specified and directed. |
| 79 | S & F for stainless steel plain partion basket of size 17\"\" x 20\"\" x 6\"\" complete all as specified and directed. |
| 80 | S & F for stainless steel cutlery basket of size 17\"\" x 20\"\" x 4\"\" complete all as specified and directed. |
| 81 | S & F for stainless steel plate/thali basket of size 17\" x 20\" x 8\" complete all as specified and directed. |
| 82 | S & F for stainless steel cup & soucer basket of size 17\" x 20\" x 4\" complete all as specified and directed. |
| 83 | S & F for stainless steel plain basket of size 17\"\" x 20\"\" x 6\"\" complete all as specified and directed. |
| 84 | S & F for 20\"\" long telephonic slider to facilitate drawer slide of steel ball bearing fixed with steel screws complete all as specified and directed. |
| 85 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ choowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate andnatural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with fullbody threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: M.S. hold fast/ lugs fasteners shall be paid for separately). |
| 86 | S & F in repair 20 mm bore stainless steel powder coated,curtain rodthickness not less than 1mm including fancy type brackets, funnels etc suitable forcurtain rod, fixed in repair, etc complete all as specified and approved by GE. |
| 87 | S&F for Mild steel, 300mm, ordinary rat tail rod patttern springs includding roller and roller plate complete fixed with screw or necessary welding to pressed steel door framecomplete all as specified and directed. |
| 88 | S&F sinks made of stainless steel 1mmthickkitchenorlaboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mmng WPC liquid of make mentioned in Annexure-I of PS as per manufacturer instruction @ 0.200 ltr in 50 Kg of cement complete all as specified and directed. |
| 89 | Supply & fixed in repair 5.50mm thick bevelled edge mirror of selected quality glass, mounted on 6 mmdia SS clamp on counter. complete all as specified. |
| 90 | S&F rubber lining fitted with aluminium powder coated strip, 100mm wide for door cill complete all as specified and directed. |
| 91 | S&Fstainless steel peg set of six of size 400mmx30mmx3mm size fitted with machine screw and wooden and plastic cleats (minimum wt 190gms)complete all as specified and directed. |
| 92 | Supply only Aluminium( extruded section body) Door closer hydraulically regulated, designation No. 1 universal type, suitable for door shutters up to 700 mm in width and of weight not more than 35 kg and fixed all as specified and directed. |
| 93 | S&F for floor door stopper of 140mm long cover plate of aluminium alloy body and tongue anodised with hard drawn steel spring, fixed in floor complete all as specified and directed |
| 94 | S & F Tubular towel rail, 20mm dia, D type, 60cm long between flangesin complete all as specified and directed. |
| 95 | S & F in repair Rotational moulded polyethlene water storage tanks three layers of 500 ltrs capacity ISI marked (cylindrical vergical with closed top) hoisted and fixed in position all as specified in SSR Part I including 20mm thick Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including dismantling of old broken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed. |
| 96 | S&Fin repairs towel Ring round with round flange ofbrass chromium plated including brackets. complete all as specified and as directed. |
| 97 | S&F stainless steel kitchen plate rack made of 1.00 mm thick sheet of size 24\"x24\" incl shelves, rod to put plates etcand fixed to wall complete all as specified. |
| 98 | M & L for repair to RCC structural member such as sunshades, balconies, Beams ,Facia and similar RCC structure as per the following precedence of application including necessary formworks and scaffolding if required upto 10 m height.(a) Taking down the damaged loose/cracked plaster /concrete from RCC surface in any thickness .(b) Applying one coat of steel bar coat of rust preventive PH RB-167 /rust free/ SHIELDOXY including preparing ,cleaning of corroded steel all as per manufactures instructionscomplete including providing additional reinforement on required basis and properly binded ,overlap with the existing reinforement and additional reinforement on required basis and maintaining sufficient developementlength /Anchorage length at the junctions to be inserted in the bearings to acknowledge proper bond with surrounding concrete complete all as specified and as specified and directed. (c) Providing /filling the plain cement concrete 1:1.5:3 type-A-0 using 12 mm graded stone aggregate upto the depth /thickness varrying from 15 to 45 mm .(d) Rending 5 mm thick in CM 1:3 and applying two coats of exterior emulsion paint over a coat of primer complete all as specified and directed. |
| 99 | M&L for reinforced cement concrete type B11:2:4 nominal mix (using 20 mm graded crushed stone aggregates) in slabs supported on walls beams, columns etc complete all as specified and directed. |
| 100 | M & L for Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)complete all as specified and directed. |
| 101 | M&L for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165complete all as specified and directed. |
| 102 | S & F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 103 | S & F for frame work for sunshade made with hollow MS pipe and flat iron incl welding ,reviting cutting holes to brick wall ,chase cutting for inserting sheet to wall incl filling with PCC 1:2:4type B0 with necessary scaffolding completeall as specified and directed. |
| 104 | S&F 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceilingcomplete all as specified. |
| 105 | S&F 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor, ceiling complete all as specified. |
| 106 | Refixing of old steel tubing 15 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc all as specified. |
| 107 | Refixing of old steel tubing 20 mm medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls, floor etc complete all as specified & directed |
| 108 | Supply & fixed in repair, Vitreous china squatting pan of pattern, long pan, \"Orissa pattern\", size 580 x 440 mm white with integral foot rests (excl flushing cistern and flush pipe) but including provision concrete bedding CI floor trap etc complete all as specified and directed. |
| 109 | S&F in repair Vitreous china wash down water closet pan pedestal pattern, white (excluding supply of flushing cistern and flush pipes, but including fixing there of),including making connections to trap, and to flush pipe incl plastec seat cover closed pattern with stainless steel or aluminised hinging devicecomplete all as specified and directed. |
| 110 | S&Fin repairs oval type Counter top Vitreous china wash basin, white of,size 550 x 400 mm including 32 mm boreCP waste pipe long screw thread and 32 mm diaflexible waste pipe incl fixing of tapsall as spd and directed. |
| 111 | Supply & fixed in repair, Vitreous china wash basin, white flat back, size 550 x 400 mm excl taps, wastechain and plug and porcelain stopper but incl brackets complete all as specified and directed |
| 112 | Supply & fixed in repair Push botton type dual flush type PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and push botton (incl brackets & flush pipe PVC 32 mm dia) capacity of 10 Litrescomplete all as specified and directed. |
| 113 | S & F in repair SS double bowl kitchen sink of 45\" x 20\" x 10\" size includingall the accessories and making connections fixed in walls including bedding in cement mortar to dwarf wall or including fixing cantilever bracket and connecting union to pipe complete all as specified and directed . |
| 114 | S&F in repair fancy type angular Stop cock15mm bore pipe ,CP cast copper alloy complete all as specified and directed. |
| 115 | S&Fin repair fancy typeBib taps for 15 mm bore pipe, cast copper alloychromium platedcomplete all as specified and directed. |
| 116 | S&F in repair long bodyBib taps for 15 mm bore pipe, cast copper alloychromium platedcomplete all as specified and directed. |
| 117 | Supply & fixing chromium plated brass central hole single lever WHB Mixer 15 mm bore for mixing hot and cold water with 450long braided house 20 cartriage size screwed down, high pressure screwed for iron pipe complete all as specified and directed. |
| 118 | S&F in repair glass self straight with CP railing20\"\" with CP Brass Bracket, complete all as specified and directed. |
| 119 | S&F in repair corner glass corner shelf quarter round with CP Brass Bracket, complete all as specified and directed. |
| 120 | S & F in repair 15 mm fancyPillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down highpressure, with or without lettered\"Hot\" or \"Cold\" withlong screwed shanks and fly-nuts, screwed for iron pipe and fixedcomplete all as specified and directed. |
| 121 | Supply & fixing in repair 3 in 1 wall chromium plated brass telephonic mixer with shower 15 mm bore for mixing hot and cold water screwed down, high pressure screwed for iron pipecomplete all as specified and directed. |
| 122 | S&F in repair health foucet hand shower 8mm dia 1mtr long flexible pipe ,hook and wall hook complete all as specified and directed. |
| 123 | S&F in repair Stop valve concealed type cast copper alloy (ISI Markd) fancy type, chromium plated with long shank and cup screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed. |
| 124 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed. |
| 125 | S&F in repairs CP soap dishfixed to walls with chromium plated (CP) brass screws complete all as specified and directed. |
| 126 | S & F Gun-metal, globe or gate valves suitable for 15 mm bore iron pipe ,cast copper alloy ,screwed down, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 127 | S & F Gun-metal, globe or gate valves suitable for 20 mm bore iron pipe ,cast copper alloy ,screwed down, with iron wheel head, screwed both ends for iron pipe and fixedcomplete all as specified and directed. |
| 128 | Supply & fixed CP Brass shower rose 200x200 mm size with with flexible brass arm 450-550mm long for 5 mm bore pipecomplete all as specified and directed. |
| 129 | S&Fgrating of stainless steel size 100mm dia(as per sample ) with hole and without hole as per requirementfixed in repairincl making good to existing floor complete all as spd and directed. |
| 130 | M & Lalong the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed. |
| 131 | M&L for providing and injecting chemical emulsion for for termite treatment of soil under existing floors around the periphery of wall upto 0.60 cm distance from the surface of wall usingemulsion @ one litre per hole, 300mm apart including drillingand plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed. |
| 132 | M&L preparation of old steel surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified. |
| 133 | M&L prepration of old wooden surfaces of anydescription, not other wise described over 10 cm width or girth and applying one coats of synthetic enamel paint , white or tinted complete all as specified. |
| 134 | S & F Galvanised SS wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with SS wire staples complete all as specified. |
| 135 | Dismantlingframed timber scantlings40 sq. cm and over in section ,in any position complete all as specified and directed. |
| 136 | M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in coping, bed plates benching,floor by maintaing required gradient/undulation and including roof beam etc slightly rounded or chamferred angles and throating, complete all as specified and directed |
| 137 | M&L for Roof trusses (framed), purlins, rails and heavy bracket frame (beam, tee, angle, channel or flat section) including distence pecies, cleats etc Fe-290 (Gde E-165) complete all as specified and directed |
| 138 | M&L for Rolled mild steel plates (plain or chequered), square cut or notched (ordinary or counter sunk) forming holes etc of Fe-290 (Gde E-165) complete all as specified and directed |
| 139 | S & F for rolled mildsteelsection work conforming to Fe -290 (gdeE-165 ) as in purlins ,rafter ,rail amd fastening and have bracket farming ( Beam, Tee, channel or flat sections ) including distance pieces ,cleats etc complete all as specified and directed . |
| 140 | M&L for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550Mpaas in roof covering / cladding to wall, fixed with self tapping screws as specified. |
| 141 | S&F 1mm thick Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275 incl dismantling of existing valley/gutter etc all as specified and directed. |
| 142 | M&L False ceiling of 9.5mm thick gypsum tiles (600x600mm) laminated with PVC film on the face side & metalised polyester film on the back side with all four edges sealed with PVC film (shade either plain white or crack) fixed using T grid/Cross-T/Wall angle/level clip & suspenders of standard galvanised sections in a grid size of 600x600mm, including taking down existing ceiling board & grid work etc of any type/pattern complete all as specified and directed. |
| 143 | Cleaning/clearing of sewage line (including manholes) 100mm to 150mm bore of any description, underground at any depth ,removing any type of blockage including desilting, descaling & dechockingof drains as well as manholes and depositing the sludge in a pit (including digging of pit) not less than 100 metres away from the site of cleaning and covering the sludge with layer of 2.5cm thick layer of earth and spraying unslacked lime on the pit and make line smooth functional all as specified and directed. |
| 144 | Cleaning of blocked WC/floor trap/gully trap etc.including and upto first manhole manually and well flushing with clear water, making the seat functional including deposting the sludge in a pit (including digging of pit) not less than 100 meter away from site of cleaning and covering the deposited sludge with minimum 25cm thick layer of earth and spreading unslacked lime on the pit all as specified and directed by Engr-in-Charge. |
| 145 | M&L Preparation of new steel sufaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint of approved shadeover one coat of red oxide primer not otherwise described including rubbing out and cleaning rust on new steel surfaces complete all as specified and as directed by the Engineer-in-charge. |
| 146 | M&L for stainlesssteel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed in repair with statinless steel wire staples. |
| 147 | S & F corrugated waste pipe, 32 mm dia, suitable for WHBs/sinks/Urinal, including threaded PVC socket suitable for shank of waste coupling complete all as specified. |
| 148 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed |
| 149 | M&L for Non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:6, complete all as specified and directed . |
| 150 | M&L for non skid ceramic jointless coloured tiles,7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but nexc 0.38 sqm in skirting etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 10mm thick screed layer in cement mortar 1:4, complete all as specified and directed . |
| 151 | M&L for 25 mm thick (average thickness) PCC 1:2:4, type B-0 using 12.5mm graded stone aggregates as in floor by maintaing required gradient/undulation, finished rough.complete all as specified and directed |
| 152 | M & L for Precast reinforced cement concrete 1:2:4 type B1 (using 20mm graded crushed stone aggregate as in manhole cover slab and finishing the surface and necessary formwork complete all as specified directed. |
| 153 | M&L TMT steel bars 6 to 8mm dia, cut to length bent to shape required including cranking bending etc and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed |
| 154 | S & F of Wire netting of stainless steel wire 0.71 mm dia wit size of mesh 25mm fixed with tinned tacks of stainless steel wire staplescomplete all as specified and directed. |
| 155 | M&L cement concrete 1:1.5:3 type B-0 (using 12.50 mm graded stone aggregate) leveling course on existingroof , rounded and chamfered on edges, with Wpc @200ml/ bag of cement complete all as spd and directed |
| 156 | M&L for APP modified roof treatment over existing non-accessible RCC roof slab / chajjah / canopy / parapet wall to be executed through approved applicator of the membrane manufacturer with following specification etc complete all as specified and directed :-(a) Cleaning the top surface of RCC roofing properly with water complete.(b) Applying Oil bound bitumen primer @ 0.30 litre/Sqm manufacture by the same agency as that of APP with a density 0.87-0.89 Kg per litre at 25 degree centigrade on prepared surface.(c) Laying of membrane not less than 3.0 mm thick APP modified water proofing membrane weighing not less than 3.60 Kg/Sqm reinforced with non woven polyster fiber weight not less than 160 Gms/Sqm using butane torch by torch application with 10 Cm side laps and 15 Cm end lap complete. (d) APP membrane shall be laid using butane torch by Torch application with minimum 10cm side overlap and 15cm end lap.(e)Top of membrane shall be provide with solar reflective bituminous aluminum paint @ 0.1 Kg /Sqm as prescribed by manufacture of membrane.(f)APP Membrane shall be stick inside parapet where available by chase cutting and sealed with PCC (1:2:4) type B-0complete. |
| 157 | M & L forChequered cement concrete tile 30cmx30cmx20mm thick ,set and jointed over 20 mm screed bed in CM 1:4 and pointed in neat cement slurry in floor with grey pigment cement and pigment complete all as specified and directed |
| 158 | S&Ffor Stainless steel fasteners of size 75mm long steel supports, fixed to walls, complete all as specified & directed. |
| 159 | S&Ffor Stainless steel designer handle (heavy duty) of 100mm size, fixed to drawers or cupboard shutters, complete all as specified & directed. |
| 160 | M & L for Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed |
| 161 | S&F for wall mount Stainless Steel plate rack (ISI Marked) of min. dimension 760 x 250 x 760 mm and weight not less than 11 kg completeall as specified and directed. |
| 162 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame including punching or drilling out old glazing pins/spribng clips and providing and fixing new ones exc 1.5 Sqm complete all as specified and directed |
| 163 | Supply and fixing sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mmand bowl size 400mmx300mmx 180mm complete all as specified and directed. |
| 164 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30 mm thick size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. Note: stainless steel butt hinges and necessary S S `screws shall be paid separately |
| 165 | S&F for Aluminium, anodised, barrel tower bolts 150 mm of extruded section and fixed. complete all as specified and directed. |
| 166 | M&L for brickwork with Fly Ash Bricks (old size), straight or curved on plan exceeding 6 metre mean radius built in cement sand mortar 1:6 but except bricks complete all as specified. |
| 167 | S&FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/Ceosetory windows & other Frames/ Chowkhat of size 50 X 125 MM comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugsor SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. complete all as specified and directed. |
| 168 | S&F for Box type steel windows comprised of tubular frame and shutters made out of 1.25 mm thickMS sheet tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire cloth and glass panes will be measured and paid seperately) with side hung shutters with MS handles and MS peg stay dovetailed or welded incl 02 Nos, MS Tower bolts 150 mm long for each leaf and 8 mm square bar grill / guard bars at spacing as shown on Drg welded to MS flat iron frame work ,including other fittings ,hinges ,MS handles ,tarred hold fasts ,PCC blocks for hold fastsetc all as shown on Drg No CEPZ/TD -354/09 sheet 1/3 to 3/3 including two coat of synthetic enamel paint over one coat of red oxide zinc primer, complete all as specified and directed by Engr-in-charge. |
| 169 | S&F 4 mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5sqmin each pane, complete all as specified and directed. |
| 170 | S&F for Butt hinges 100 mm long, stainless steel, medium weight with SS hinges pin and fixed complete all as specified. |
| 171 | S&F \"as in repair\" 25mm outer dia stainless steel decorative drapery rod of thickness 20 guagewith stainless steel brackets near to ends with stainless steel finialswith adopter for 25 mm dia drapery rod at both ends complete all as specified and directed. |
| 172 | M&L Marble work Udaipur green 16mm to 18mm thick (table rubbed and polished)as in cooking platforms, treads, riser or landing of stair hall, window cill and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade of other than white and black incl cutting of 25 mm dia hole for gas pipe and incl rounding to edges complete all as specified and directed. |
| 173 | Supply & fixed PVC grating square, 150 mm (Hinge pattern and with or without hole) complete all as specified and directed. |
| 174 | M&L for coloured machine pressed precast rubber moulded concrete interlocking red/yellow) paver block of any shape and size with 6-8mm white cement layer mixed with pigment and coated with epoxy coating having high glossy finish confirming to IS 15658-2006 of 60mm thickness, M-35 Grade, laid dry over and including 50mm thick sand filling under paver, properly levelled etc, including taking out existing interlocking paver block complete all as specified and directed. |
| 175 | M&L for 75 mm thick cement concrete type C-2, 1:3:6 (40mm graded agg) as in Sub-base to floor finishes complete all as specified and directed. |
| 176 | Rendering 05 mm thick plaster in cement mortar 1: 3 on concrete surfaces as in ceilingsfinished even and smooth without using extra cement, complete all as specified. |
| 177 | Rendering 10 mm thick on fair face of brick work or concrete surface in CM 1:6,finished even and smooth without using extra cement complete all as specified and directed. |
| 178 | M&L for 15mm thick rendering in two layers (5mm thick in CM 1:4 over 10mm thick in CM 1:6) on brick work and concrete surfaces of wall, finished the surface even and smooth without using extra cement, mixing and including WPC @ 200ml/bag of cement, complete all as specified and directed. |
| 179 | Taking down cement plaster and decayed concrete of any description, upto tripple storey of building, from roof projection, chajja etc and making good the decayed portion with cement mortar1 :3 mixed with water proofing compound as per manufacturers instruction or PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) including necessary form work and finally finished the surface with 15mm thick cement plaster in CM 1:3, complete all as specified and directed. |
| 180 | Preparation of newly plastered surface of wall and applying two coat of oil bound distemper, white or tinted shade with and including priming surface with chalk whitening and 1mm thick putty, complete all as specified and directed. |
| 181 | Complete removal of existing treatment of wall surfaces and applying two coat of oil bound distemper, white or tinted shade with and includingpriming surface with chalk whitening , and 1mm thick putty, complete all as specified. |
| 182 | M&L for preparing newly plastered surfaces and applying three coats of white wash as in ceiling etc complete all as specified and directed. |
| 183 | M&L for preparing of plastered surfaces of ceiling, old decorated surfaces and applying one coats of white wash complete all as specified and directed. |
| 184 | M&L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc; and cutting chases for concealed water tubing ,etc., and making good, cutting not exc 10 cm girth in brick walls, complete all as specified. |
| 185 | Taking down existing water heater storage type steel body andrefixing the same complete all as specified and as directed by Engr-in-Charge. |
| 186 | Taking down existing electric meters andrefixing the same complete all as specified and as directed by Engr-in-Charge. |
| 187 | Taking down existing Ceiling Fans andrefixing the same complete all as specified and as directed by Engr-in-Charge. |
| 188 | M&L for modular point wiring for one light/fan/bell point controlled by one switch complete with 1.5 Sqmm multistranded FRLSPVC insulated unsheathed, FRLS, multistranded copper conductor cable 1100 volts grade (red, yellow & blue) in and including medium duty non metallic rigid PVC concealed conduit 20 mm dia including conduit accessories like bends, tees junction boxes etc fixed concealed/recessed in wall or ceiling etc including 1.5 Sqmm single core FRLS PVC (green) insulated unsheathed multi stranded copper conductor 1100 Volts grade as earth continuity wire connected to earth dolly including inner and outer frame plate matching with surrouding with modular sunken steel boxes zinc oxide plated of suitable size including modular sheets of suitable module and back plates etc. complete all as specified and directed. |
| 189 | M&L for point wiring for one metal plug top for Geyser / AC using 2.5 Sqmm FRLS PVC insulated unsheathed multi-stranded copper conductor cable drawn through & including non metalic rigid PVC concealed conduit (ISI marked) not less than 20mm dia medium duty with all necessary fittings, incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly complete all as specified and directed.Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces. |
| 190 | S&F in repairs modular switch, one module,1 way, 6 Amps 240 volts complete all as specified and directed. |
| 191 | S&F in repairs modular switch, one module,1 way, 16 Amps 240 volts complete all as specified and directed. |
| 192 | S&F in repairs modular bell push 6A, 240 volts, 1 Module complete all as specified and directed. |
| 193 | S&F in repairs modular switch, two way,6A, 240 volts, 1 Module complete all as specified and directed. |
| 194 | S&F in repairs modular socket 6A, 240 volts 2 & 3 pin,2 Module complete all as specified and directed. |
| 195 | S&F in repairs modular socket, 6A & 16A, 240 volts, 2 & 3 pin, 2 Module complete all as specified and directed. |
| 196 | S&F in repairs modular step type fan regulator 120W, 240 volts,2 Module,complete all as specified and directed. |
| 197 | S&F in repairs ceiling rose, 3 phase PVC / polycarbonate, isolated body complete all as specified and directed. |
| 198 | S&F in repairs modular cover plate with back plate 2 modules on sunken box for fixing of switches and sockets complete all as specified and directed. |
| 199 | S&F in repairs modular cover plate with back plate 3 modules on sunken box for fixing of switches and sockets complete all as specified and directed. |
| 200 | S&F in repairs modular cover plate with back plate 4 modules on sunken box for fixing of switches and sockets complete all as specified and directed. |
| 201 | S&F in repairs modular cover plate with back plate 6 modules on sunken box for fixing of switches and sockets complete all as specified and directed. |
| 202 | S&F in repairs modular cover plate with back plate 8 modules on sunken box for fixing of switches and sockets complete all as specified and directed. |
| 203 | S&F as in repairs sunken steel box, zinc oxide plated of size 4\"\"x4\"\" including cutting the wall to required shape and making good the disturbed surfaces to match existing one complete all as specified and directed. |
| 204 | S&F as in repairs sunken steel box, zinc oxide plated of size 7\"\"x4\"\" including cutting the wall to required shape and making good the disturbed surfaces to match existing one complete all as specified and directed. |
| 205 | S&F as in repairs sunken steel box, zinc oxide plated of size 9\"\"x11\"\" including cutting the wall to required shape for fixing and making good the disturbed surfaces to match existing one complete all as specified and directed. |
| 206 | S&F as in repairs sunken steel box, zinc oxide plated of size 7\"\"x9\"\" including cutting the wall to required shape for fixing and making good the disturbed surfaces to match existing one complete all as specified and directed. |
| 207 | S&F in repairslamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings complete complete all as specified and directed. |
| 208 | S&F in repairs LED Lamp of 9W, Base B22, BEE 3 Star complete all as specified and directed. |
| 209 | Supply & fix in repairs LED tube light fittings (4 feet long), wall mounted 1x20 watt6500K, Decorative ultra slim square profile LED lighting fixture with extruded polycarbonate, environmental friendly, energy efficientwith all accessories and making connection using 2 core, 0.50 Sqmm PVC insulated and overall sheathed flexible copper conductor cable from ceiling rose/PVC connector to light fitting and testing etc complete all as specified and directed. |
| 210 | S&F in repairs LED light fitting, mirror type with high out put diffuser, 2 feet,10 watt, 220 volt, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 211 | S&F in repairs LED Bulk Head luminaries, 10W complete with all accessories and including connector andconnecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ complete all as specified and directed. |
| 212 | S&F decorative wall mounting LED bed side light 3 watt 3000k fitting having flexible neck and mounting arrangements allas specified and directed. |
| 213 | S&F in repairs decorative wall light white in colour made up of poly carbonate including 9 watt retrofit LED Lamp complete all as specified and directed. |
| 214 | S&F in repairs building security LED lightluminaire 30 W, IP 66, IK-07, AC 230 volts, made up of pressure di-cast iron housing complete making connectionusing PVC insulated and sheathed3 core multi stranded copper conductorcable of size 0.50 Sqmm from ceiling rose including MS bracket made of 25/32mm GI pipe bent to shape, fixed to wall with clamps and nurs & bolts for mounting fittings complete all as specified and directed. |
| 215 | S&F in repairs sheet metal enclouser,single pole and neutral 240 volt, 20 to 32 Amps with two pin and earth plug and socket plug top complete with single pole MCB complete all as specified and directed. |
| 216 | S&F in repairs sheet metal enclousre for DBs double door single pole and neutral with 200 amps rated bus bar 8 way, 240 volts complete all as specified and directed. |
| 217 | S&F in repairs MCB single pole and neutral, 63 Amps, 240 volts, B-series complete all as specified and directed. |
| 218 | S&F in repairs MCB single pole 16 to 32 Amps, 240 volts, B-series complete all as specified and directed. |
| 219 | S&F as in repairs prewired VTPN Distribution board of size not less than 750mmx470mm with provision for & including MCCB as incommer 63 Amp, 04 pole IP 54, 04way (for incomming MCCB & outgoing MCBs), with copper busbar for each phase, withNeutral bar,Earth bar and cable ties for cable managemet, fully insulated busbar & shrouded Neutral bars, with 63 Amps MCCB, 50 KA, 4 pole, as incomer and SP MCB\"s of capacity 6-32amps as outgoing complete all as specified and as directed. Note: Cost of MCCBs and MCBs, cutting chases, grouting in wall shall be deemed included inunite quoted rate of this item. |
| 220 | Supply and fix exhaust fans AC single phase 230/240V, 50 Hz, RPM not less than 1200, Copper winding of size 250 mm sweep white colour Model DX made of sturdy Engineering plastic complete with louvreincluding connecting to ceiling rose all as required or directed. |
| 221 | M & L for cutting hole in brick/stone masonary wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos forfixing exhaust fanall as spd and directed.Note : (i) Rates are deems to be included to making the cutting hole smoothly and colour wash as per exisiting colour.(ii) Rates are deems to be including charges of hiring T & P, i.e. ledder square foldingand insurance of labour deployed, being holes are made to be at mutlistorage bldgs of different height . |
| 222 | Supply and fix for electric water heater vertical type, 230 Volts AC Single Phase, single weld lined high grade stainless steel (304) inner tank with advanced vitreous enamel/ glass coating storage type, ABS Body mult-layer for anti-corrosion protection high density PUF insulation, superior quality, copper heating element not less than 2 KW with glass coating, overheat protection (thermostat + thermal cut out), maximum operating pressure 8 Bars, Capacity 10 litre, BEE 5 Star rated, Maximum water temp 75/80 °C, Heating Indicator LED Type. Extra thick magnesium Anode provides added protection complete with all accessories such as safety valve, thermostat, thermal cut out, plug top & NRV, Power Cord 3 Core of suitable size and length etc and heavy duty anchor bolt fastner not less than 100 mm long with suitable size of nut, washer and Plastic Adapters, grouted in wall with complete mason work for proper mounting of geyser fastner bolt and making necessary inlet/ outlet water connection, electric connection and testing on load all as directed by Engr-in-charge. |
| 223 | S&F Gl tubing medium grade Gaivanized of size 15mm bore with all fitting such as bends elbows, tees short pieces, connector check nuts & threading complete laid on wall surfaces complete all as directed by E-in-Charge. Note - only Connection will be taken independently from nearest existing main water pipe line of the building and repair to existing damaged wall by providing cement mortar, white wash, tiling if required as per existing size and colour including making good the disturbed surface as existing surface including removing the rubbish off the premises complete all as specified and directed by Engr-in-Charge. |
| 224 | S&F Bib cock wall mounted cast copper alloy, with capstan heads, chromium plated screwed down high pressure, with marked lettered \"Hot\"with long screwed shanks and fly-nuts, screwed for GI pipe of size 15mm dia complete all as directed. |
| 225 | M&L for cutting existing GI pipe line of size 15/20 mm dia pipe making new connection including provn of providing short pieces inserting tees, bends, sockets union etc with existing water pipe line all as specified by Engr-in-charges. |
| 226 | M&L of Bell, Ding Dong AC. 230 volts, single pole all as specified. |
| 227 | M&L for Earthing complete with galvanised steel earth plate electrode 600mmx600mm thickness not less than 6mm thick buried directly in ground (earth pit not less than 2.25 mtr deep below normal ground level) with top edge of earth plate not less than 1.5m below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron/steel all as shown in electric plate No 3connected to earth test point/MCB DBs all as specified and indicated complete with funnel, charcoal, dust, salt etc and GI protection pipe, medium grade 15mm bore and GI watering pipe 20mm bore light grade, 40mm thick precast RCC M-15 (nomial mix) cover reinforced with XPM weight not less than 4 Kg/Sqm with suitable handle of 6mm dia MS bar and angle iron 40x40x3mm frame for cover, PCC M-15 (Nominal mix) pit, excavation and earth work in any type of soil and connected, complete all as specified & directed. Note:- 1. Earth lead & protection pipes length upto & including 7.50 metre is deemed included in the unit rate quoted by the contractor.2. Soil should be free fromstone, boulders, aggregate, gravels etc |
| 228 | M & L for sub main wiring with 6.0 sqmm copper conductor cable multistrand, FRLS PVC sheathed two run (as phase and neutral) and run 6.0 Sqmm multistrand PVC sheathed copper conductor cable for earth continuity in drawn in rigid non metalic PVC conduit complete all as specified and directed by Engr-in-charge.(Note:- The rate for concealed type point wiring shall deemed to include the cost of cutting,chasing in wall by using electric cutter andmaking good the disturbed surface of wall by providing cement plasterand matching the surface by white wash/colour wash all as per existing finishes complete). |
| 229 | S&F in repairs sheet moulded compound (SMC) meter box fire retardant type of size not less than 600mmx500mmx150mm to enclose 04 nos single phase electric meters with hinged type front operated door having transparent acrylic sheet and proper locking arrangement and flush mounting in wall including refixing the serviceable electric meters, dismantling and making electrical connections including cleaning of disturbed areas and making good the disturbed surface and matching with existing surface complete all as directed. Note : Rate quoted shall deemed to be in unit quoted rate of the item included taking down existing electric meter and refixed in new meter box with proper electrical connection. |
| 230 | Taking downCeiling fan/exhaust fan , sealing cable end, dismantling blades and removing fan and blades and re fix the same position after servicing including minor repairs by replacement of capacitor, safety pin, cap, nuts & bolts etc and making connection using 3 core, 0.50 sq mmPVC insulated and overall sheathedflexible copper conductorcable from ceiling rose to fan, including testing to ensure efficient functioning including application of one coat of synthetic enamel paint by spray painting& rewriting number complete all as specified and directed. |
| 231 | Taking down copper /aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches , ceilling roses , holder , tube light , bulk head , pendants, regulators, sockets etc, removing materials to store for keeping in safe custody or for taking credit (Credit for above items should be made as per conditions separately) and making good surfaces , wall, floors etc.) |
| 232 | M& L in replacement of Point wiring for one light point / fan point or bell point controlled by one switch with 1.5 sqmm PVC insulated unsheathed, FRLS , Multistranded copper conductor cable as in and including non metalic rigid PVC concealed conduit ISI marked, not less than 20mm dia, mediun duty for one light, fan, bell pioint controlled by one switch includingsunken steel boxes of suitable size with 3mm thick plastic laminated backelite sheet including FRLS PVC insulated unsheathed multistranded copper conductor cable of size 1.5sqmm (green colour ) as continious earth wire and connecting to earth dolly, and making good to distrub surfaces of wall/floor to match to existing finishes etc complete all as specified and directed. Note: The unit rate quoted include the cost of cutting chases in surfaces for conduits and fixing of sunken boxes and making good the distrubed surfaces to match the existing surfaces. |
| 233 | M& L in replacement of Point wiring for one 2 way light point/ fan point/ bell point etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate sizenot less than 20mm dia,and with sunk cast ironfor mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified. |
| 234 | M& L in replacement of Point wiring for one socket outlet 5 Amp 3/5 pinfor independent board etc controlled by one switch with copper conductor cable FRLS type multistrand of size 1.5 Sqmm(red or yellow or blue colour) PVC insulated and unsheathed with 1.5 Sqmm PVC insulated copper conductor cable as earth wire (green colour), in and including non metalic rigid PVC Conduit of appropriate sizenot less than 20mm dia,and with sunk cast ironfor mounting fittings like switch, sockets etc covered with 3.00 mm thick plastic laminated sheet top cover all as specified. |
| 235 | All as per Sl item No 233 here in above but for one 3/5 pin 5 amps socket outlet on the same board with other switch complete all as specified and directed. |
| 236 | All as per Srl item No. 233 here-in-above but for one 15 Amp independant socket outlet pointusing 2.5 Sqmm FRLS PVC insulated unsheathedmulti-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked)not less than 20mm dia,medium duty including sunken steel boxex of suitable size with 3mm thick plastic laminated bakelite sheet incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 2.5 Sqmm (green colour) earth wire connecting to earth dolly . |
| 237 | All as per Srl item No. 233 here-in-above but for metal plug top of Geyser pointusing 4.0 Sqmm FRLS PVC insulated unsheathedmulti-strand copper conductor cable drawn in including non metalic rigid PVC concealed conduit (ISI marked)not less than 20mm dia, incl FRLS PVC insulated unsheathed multistranded copper conductor cable of size 4.0 Sqmm (green colour) earth wire connecting to earth dolly . |
| 238 | M & L for Switch pianoflush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 239 | M&L for two way switchpiano, flush button, single pole two way 6 amps 240 Volt with polycarbonate body complete all as specified and directed. |
| 240 | M&L for Bell push switchpiano flush button single pole one way 6 Amps 240 volts with polycarbonate body complete all as specified and directed. |
| 241 | S&F for multi socket outlet for 2 &3 pin, 6A, flush type complete all as specified and directed. |
| 242 | S&F for socket outlet 2 in 1, 5 pin, 6 and 16 Amps , flush type, single pole, oneway,230Volts complete all as specified and directed. |
| 243 | S&F for switch piano, flush type, single pole, oneway, 16 Amps 230Volts complete all as specified and directed. |
| 244 | S&F for stepped type electronic mini /delux fan regulator 100 watt rotary step all as specified and directed. |
| 245 | Supply, fixing and testing of exhaust fans AC single phase rated voltage 230V, not more than 50W, 1350rpm of size 230 mm sweep, Double ball bearings heavy duty motor, Protective bird guard is provided, steel body with louvre including connecting to ceiling rose and making hole in brick/stone masonary wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos forfixing exhaust fanall as required and directed. |
| 246 | Supply, fixing and testing of exhaust fans AC single phase rated voltage 230V, not more than 50W, 1350rpm of size 300 mm sweep, Double ball bearings heavy duty motor, Protective bird guard is provided, steel body with louvres including connecting to ceiling rose and making hole in brick/stone masonary wall and provision of PCC 1:3:6 for making proper suitable size of hole to matching with size of exhaust fan for proper ventilation including MS bolts 04 Nos forfixing exhaust fanall as required and directed. |
| 247 | Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out all as specified and directed. |
| 248 | Returning filling in (soil) including spreading , levelling ,watering and well ramming in layers not exceeding 25cm thick all as specified and directed. |
| 249 | Removing exacavated materials (soil) to a distance not exceeding 50m away from the starting pointand dipositing where directed at a level not exceeding 1.5m above all as specifiedand directed. |
| 250 | M& L for sand cushioning to the under ground cable complete as per SSr Part - I clause 19.75 all as specified and directed. |
| 251 | Material and labour for brick protection with sub class B bricks using old size bricks , laid dry, flat over cable , longer length of brick laid perpandicular to the cable in trenches all as directed. |
| 252 | M &L ofXLPE insulated, armoured, heavy dutyelectric cable with aluminium conductor 1100volts grade, cross section area 25 sqmm 4 core complete all as specified and directed. |
| 253 | S&Fforgalvanised iron tubing light grade size 40 mm dia for protection of cables with all fitting and fixed complete to pole or laid in ground complete all as specified and directed. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
