Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed. |
| 2 | Material and labour for 75mm thick plain cement concrete type D2 (1:4:8)(40mm graded aggregate) as in sub base of floor, path etc,complete all as specified and directed. |
| 3 | M&L for screed bed or bedding layer of mortar 20mm thick in CM 1:6 for laying floor fininshes completed all as specified and directed. |
| 4 | M&L for machine cut Kota stone slab flooring, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing (granite finish) and exposed edges of Kota stone shall be rounded complete all as specified and directed. Note:- Cement screed bed shall be measured and paid separately. |
| 5 | M&L for machine cut Kota stone slab as in vertical surfaces such as dado/skirting, 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including grinding, rubbing and polishing and exposed edges of Kota stone shall be rounded complete over and including 15 mm thick screed bed or bedding layer in CM 1:4 finished even and rough all as specified and directed. |
| 6 | Dismantling of floor hearth or wall tiling including cement mortar bedding but not backing and removing serviceable tiles to store yard and rubbish off the primises as directed |
| 7 | M&L for non skid cramic tiles colured of size area of each tileexc 0.18 sqm but not exc 0.38 sqmin flooor etc,jointed in neat cement slurry and pointed in white or colours cement to match complete all as specfied and directed over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed |
| 8 | Material and labourfor glazed ceramic tilescolouredof size 350 x 450 x 7mm thick in walls etc, set & jointed in neat cement slurry and pointed in white or colours cement to matchthe colour of tiles over and including 10mm thick rendring in CM (1:4) complete all as specified and directed. |
| 9 | M&L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares n.exc. 0.5 sqm each pane including hacking out old broken glass (any thickness, size, quality or description) from wooden frames / steel frames, glazed with putty or fixed with beads complete all as specified. |
| 10 | Material and labourfor 75 mm thick PCC 1:3:6 type C-2 (using 20 mm graded stone aggregate) as in plinth protection, surface finished even and smooth without using extra cement, laid in panels n exc 3 mtr long and joints shall be filled with the mixture of bitumen and sand in (1:3) by weight, complete all as specified and directed. |
| 11 | Material and labour for machine pressed precast concrete interlocking paver block any shape and size with grey cement and pigment conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade, approved colour and design laid over 50mm thick sand cushion and filling of joints with Narmada fine sand complete all speciified |
| 12 | M&L cement concrete type C-1,1:3:6 ( 20mm graded stone aggregate) as in copings, packing complete all as specified and directed. |
| 13 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 14 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed |
| 15 | Taking down cement plaster of any description including raking outjoints, hackisng for key, scrubbing down with water etc. |
| 16 | Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfacesfinishing the surface even and smooth without using extra cementcomplete. |
| 17 | -Ditto- all as per Srl item No.16 here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound includincomplete. Note:-Supply only of W P C shall be measured and paid separately. |
| 18 | supply Integral water proofing Liquid of Dr fixit/sika/Fosroc |
| 19 | Dismanteling of wooden truss/ scanteling purlin rafter etc 40 Sqcm and over in section, in any position (framed work) all as specified and directed.. |
| 20 | Dismantling wrought iron or mild steel work of any description not otherwise described for of any description. |
| 21 | S&F 2nd class hard woodplain, solid, straightchowkats and frames, wrought, framed rebated on the solid, rounded or chamfered , put together with glue, pinned at joints complete all as specified and directed. |
| 22 | S&F for Roof trusses (Framed), trussed, purlins, crane gantries, rails and fastening and heavy brackets framing(Beam, tee, angle, channel or flat section) including distance pieces, cleats, etc. Gde Fe 410-W (Gde-E-250) quality-A. |
| 23 | Dismantling Plain or corrugated steel/ transluscent sheeting, any gauge, thickness, including Nainital or Similar pattern roof coverings etc complete |
| 24 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and bitumen washer complete all as specified and directed |
| 25 | S&Fpre painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws as specified . |
| 26 | M&L for complete removal of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails and applying oftwo coat OBD on wall over including a coat of primer applied and a coat of 1mm thick wall care putty compeletall as specified and directed. |
| 27 | M&Lcomplete removal of existing treatment andfor applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. |
| 28 | Material and labourfor preparation of old wooden based painted surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint all as specified. |
| 29 | All as per itemabovebut one coat of synthetic enamel paint over old/New steel surfaces and-ditto- |
| 30 | M&L for preparing newly plastered walls surfaces and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces complete all as specified and directed by Engr-in-Charge. |
| 31 | M&L fortwo coat OBD on newly plastered wall surface over including a coat of primer applied including a coat of 1mm thick wall care putty complete all as specified and directed by Engr-in-Charge. |
| 32 | Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 Sqm on plan and not exc 1.5m in depth and getting out is soft/loose soil. |
| 33 | Surface excavation n.exc (not exceeding) 30 cm deep and averaging 15cm deep and getting out in Soft / disintegrated rock. |
| 34 | Removingexcavated material exc. 250 m but n exc. 500 m and depositing where directed |
| 35 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. in Soft / disintegrated rock. |
| 36 | M&L for PCC 1:4:8 type D2 (40mm graded aggregate in foundation filling and mass concrete) |
| 37 | M&L for PCC 1:5:10 type E2 (40mm graded aggregate in foundation filling and mass concrete) |
| 38 | Formwork for Rough finished surfaces of concrete, to sides of concrete foundations, footings, bases of columns, raft and raft beams,sides and soffits (if any) of foundation and plinth beams;and similar work; vertical or to batter. |
| 39 | Formwork for Rough finished surfaces of concrete, to sides and soffits of floor or roof beams, beam haunchings,girders, bressummers,lintels, cantilevers, shelves including supports,overhangs,etc. also splays between floors and beams, etc. |
| 40 | Formwork for Rough finished surfaces of concrete, to sides of pillars,posts, struts, piers, columns and stanchions. |
| 41 | Formwork for Rough finished surfaces of concrete, to chullah hoods, chajjas,troughs and similar items including edges. |
| 42 | Formwork for Rough finished surfaces of concrete, to soffits and sides of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) |
| 43 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 44 | Ditto, but 5mm dia and over upto and including 10mm dia in stirrups, spacers and binders |
| 45 | M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in foundations, footing, plinth beams, bases for columns and mass concrete complete all as specified and directed. |
| 46 | M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in lintels over 1.5m clear span, beams and cantilevers complete all as specified and directed. |
| 47 | M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in slabs supported on walls, beams & columns complete all as specified and directed. |
| 48 | M&L for Reinforced cement concrete design mix M-25 (using 20 mm graded stone aggregates) in columns, pillars, posts & struts complete all as specified and directed. |
| 49 | M&L for brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 |
| 50 | M&L for 15 mm thick cement plaster in CM 1:6 on brick surface finished even and smooth without using extra cementComplete all as specified and directed by Engineer-in-charge. |
| 51 | M&L for rendering 15mm thick in CM (1 : 4) mixed with water proofing coumpound @ 3% by the weight of cement on brick work or concrete surfaces finished even & fair complete all as specified & as directed.Note:- Water proofing coumpound will be measured saperately. |
| 52 | M&L for rendering 10mm thick in CM (1 : 4) mixed with water proofing compound @ 3% by the weight of cement on concrete surfaces in ceiling finished even & fair complete all as specified & as directed.Note:- Water proofing compound will be measured separately. |
| 53 | Supply only Integral waterproofing compound. |
| 54 | M&L prepararing newly plastered surfaces of wall, pilasters, comices etcand applying two coat of water based exterior emulsion over and including a coat of primer over a coat of birla white puttyas Approved by GE complete all as specified & as directed. |
| 55 | M&L for one coat of 1mm thick wall care putty on wali surface. |
| 56 | M&L for prepararing newly plastered surfaces and applying three coats of white wash on walls all as specified and directed |
| 57 | M&L for prepararing newly plastered surfaces and applying two coats of white wash on ceilingall as specified and directed. |
| 58 | M&L for 25 mm thick PCC 1 : 2 : 4 type B-0 (Using 12.50mm graded stone aggregate) as in floor complete all as specified & as directed. |
| 59 | Material and labourfor non skid-ceramic tilescolouredof size area of each tile exc.0.06 sqm but not exc . 0.11 sqm (300 x 300 mm) X 6mm thick in floors etc, set & jointed in neat cement slurry and pointed in white or colours cement to matchover and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed |
| 60 | S&F glazed ceramic coloured tiles 350x 250x 7mm / 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in colour cement on vertical surfaces such as in dado/skirting etc over and including 15 mm thick rendering in cement mortar 1:4 complete all as specified and as directed |
| 61 | Supply and fixing of Vitreous Chinawash down water closet pan (Pedestal Pattern) and trap (standard pattern) coloured as approved including connection to drain (or outgoing pipe) and to flushing pipe anti symphonize pipe etc. including plastic water closet seat, white/black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminium hinging device and jointingcomplete with fixing bolts complete |
| 62 | S & F 10 ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. |
| 63 | S&F inVitreous China counter top oval type colouredwash basin suitable size including pillar taps with bottle trap, including waste pipe fixing on counter with stainless steel brackets complete all as specified. Make Jaguar or equivalent |
| 64 | M&L for 10mm thick plastering in CM(1:4) on concrete roof surfaces using water proofing compound @ 3% by weight of cement and finishing the surface even and fair including taking down existing plaster and APP membrane all as specified and directed.Note :- WPC shall be measured and paid separately. |
| 65 | M&L for applying two coat of bonding material using blown type bitumen grade 85/25 @ 1.20 kg/sqm applied hot over a coat of bitumen primer on finished plastered surfaces complete all as specified and directed. |
| 66 | M&L for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. |
| 67 | S&F 500 ltr capacity rotational moulded polythene water storage tanks (cylindrical vertical with closed top three layer) hoisted and fixed in position incl 20mm dia bore ball valve PTMT high pressure with polythene float and fly nut complete all as specified and directed. |
| 68 | S&F in repair 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed all as specified and directed. |
| 69 | M&L for PCC 1:3:6 type C2, using 40mm graded stone aggrgates as in platform to PVC water tanks all as specified and directed. |
| 70 | Cutting chasesnot exceeding 10cm girth for concealed water tubing and making good in cement mortar 1:3 complete all as specified and as directed. |
| 71 | Supplying, fixing, jointing and testing galvanised iron tubing medium grade with all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in floor complete all as specified and as directed for the following sizes:- |
| 72 | (a) 15 mm dia bore |
| 73 | (b) 20 mm dia bore |
| 74 | Supply and fixingin repair of fancy type three handle wall mixer, chromium plated with or without lettered Hot or Cold with a single unit fitted on wall and fixing for pipe of 15mm bore make as given in list of makes as directed by Engineer-in-charge |
| 75 | S&F chromium plated shower roses 125 mm longwith or without swivel joints, any size, including fixing fixing to steel pipe or union complete all as specified and direceted. |
| 76 | S&F 15mm bore CP bib tap cast copper alloy with crutch or butterfly handle, screwed for iron pipe or for brass ferrule complete all as specified & as directed. |
| 77 | S&F in repair 15mm bore dia Chromium plated stop valve/angle cock, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete. |
| 78 | Supply only 15 mm bore chromium plated Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed |
| 79 | S&F PVC connection 15mm dia of length not less than 450mm with both ends, brass fly nut complete all as specified & as directed. |
| 80 | S&F in repairtowel rail 600mm long of PTMT fixed with and incl CP brass screws and wooden/plastic cleats (min wt 190gms) complete all as specified. |
| 81 | S&F 600mmx450mm Looking mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 82 | S&F PVC (SWR) floor trap plain with gratinghaving dia meter of out let 75mm including jointing with solvent cement to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified & as directed. |
| 83 | S&F 75mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint laid in trenches or in floor. |
| 84 | S&F 75mm bore PVC (SWR) bend in any radius. |
| 85 | S&F 75mm bore PVC (SWR) junction (single ‘T’) equal or unequal. |
| 86 | S&F 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint fixed to wall. |
| 87 | S&F 110mm dia PVC (SWR) pipe and single socketed in any length with rubberring joint , laid in trenches or in floors. |
| 88 | S&F 110mm bore PVC (SWR) junction (single ‘T’) equal or unequal. |
| 89 | S&F 110mm bore PVC (SWR) bend in any radius. |
| 90 | S&F 110mm bore PVC (SWR) vent cowl. |
| 91 | M&L for PCC 1:3:6 type C-2 as in plinth protection 75mm thick. |
| 92 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate in drains and surface channels and finishing complete all as specified and directed by Engineer-in-Charge. |
| 93 | M&L for PCC (1:2:4) type B-1 using 20 mm graded stone aggregate as in copingincludingslightly rounded or chamfered angles and including necessary form work. |
| 94 | M&L for Providing precast cement concrete Type B1 1:2:4 (20mm graded aggregate) as in landings, cover slabs (for man holes etc.) |
| 95 | S&F Steel ventilator with top hung shutter including hinges, steel peg stay, complete. |
| 96 | S&F 3 mm thick Figured glass, pin head type and glazing withoil putty in squares n exc 0.5 sq. m in each pane complete all as specified and as directed. |
| 97 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire sta-ples complete all as specified and as directed . |
| 98 | S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 |
| 99 | M & L preparing new steel surfaces and applying two coat synthetic enamel paint over including a coat of red oxide primer over 10 cm width or girth complete all as specified and as directed. |
| 100 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with and including MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. |
| 101 | Factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and provision and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. |
| 102 | S&F 200mm long aluminium anodised, barrel tower bolts of extruded section. |
| 103 | S&F 300mm long Aluminium alloy, anodised,sliding door bolt with hasp,staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed |
| 104 | Supply and fixing 100mm size butt hinges extruted aluminium alloy withgalvanized mild steel hing pin anodised and fixed type C-21. |
| 105 | S & F 150 mm size extruded aluminium alloy handles cast type anodised and fixed. |
| 106 | Construction for 10 users Septic tanks excavation in ordinary soil, foundation in PCC 1:2:4 brick work in CM 1:4,,RCC cover slab including RCC precast manhole cover having 6mm plate embedded all around/fibre reinforced cover with angle iron frame vent shaft and sludge chambers etc complete all as specified. |
| 107 | M&L for sand filling under floor or in foundation including watering and consolidation all as specified and directed. |
| 108 | S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.50mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug(b) Middle/style rail : 85x44x1.20mm thick(c) Bottom/top rail : 114x44x1.20mm thick(d) Aluminium beading : 0.7mm thick(e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty ( Make Sandhu marked or its equivalent approved make)(f) Making good of wall surface to match with existing surface complete. |
| 109 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and including 5.50mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 110 | M&L, Broken stone or boulder Hardcore of guage n exc 63 mm, deposited, spread and levelled in layers not exc 15 cm thick , watered and rammed to a true surfaceetc all as specified and directed by engineer- in- charge |
| 111 | Material and labour light shed vitrified Ceramic tiles 9mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match over and including 15 mm thick screed bed in Cement Mortar 1:6 complete all as specified and directed |
| 112 | All as per item No 109but in skirting, vertical surface dadoes and riser etcover and including 10mm thick rendring in CM (1:4) complete all as specified and directed. |
| 113 | M & L 16 to 18 mm thick granite(Zed Black colour as approved by GE) stone slab machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding,round bull nosing edging and polishing as in kitchen platform/dado/skirting /plateform counter top WHB in cluding cutting holes for oval shape /urinal partitions etc. including 15 mm thick cement screed bed 1:6 CM in horizontal or vertical surfaces including grinding the edges half round and polishing complete all as specified and directed by Engineer-In- Charge. |
| 114 | Supply and fix APP polymeric water proofing membrane, minimum 3mm thick and weighing above 3.0 Kg/Sqm tochschield membrane/equilvalent with rich bitumen and select polymers blended to obtain excellent heat resistant & cold resistant, black finish reinforced with non-woven polyester matt, with a thermo fusable finish laid over compabble bitumen primer torching overlaps with a propane or a butane gas torch, with a overlap of 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer\"s instructions completed including removal of existing treatment all as specified and as directed. Note (i) Coved fillets in PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate, of radius 75mm shall be provided at the junction of roof and parapet wall/mumty/chimney/other vertical surfaces and thereafter surface painted with hot paving bitumen of grade 85/25 confirming to IS-73, [email protected] Kg/Sqm (ii) Polymeric membrane shall be taken to a height of 45cm (minimum) and then inserted inside the groove of parapet wall of brick masonry and shall be finished by membrane flushing (iii)The waterproffing treatment shall be got carried out by the manufacturer or their authorized applicators (iv)In case stone masonry parapet wall etc a groove of size 25mmx25mm(minimum) shall be made in coved fillet at the junction of roof and parapet wall/mumty chimny/other vertical surfaces and polimeric membrane insterted in groove and sealed with paving bitumen (v)Exposed surfaces of APP membrane insterted in groove and sealed with paving bitumen (vi) Above aspects are deemed to be included in quoted rate. |
| 115 | M & L excavating in post holes (or similar holes) each n exc 0.5 cum , getting out , returning , filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm for soft and dis-integrated rock, watering , and removing surplus soil to a distance n exc 50 m and making good surfaces complete all as specified and directed |
| 116 | S&F mild steel work as in tubular pipes including necessary welding or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed. |
| 117 | S&F of joist, channel, angle, flat iron or Tee sections, fixed independently with trusses connecting plates,such as in column etc complete all as specified and directed. |
| 118 | M&L in repairs for machine pressesd coloured glazed chequered cement concrete 20cm x 20cm x 25cm thick Glossy finish with mixture of grey and white cement in equal proportions and no pigment set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer of mortar 20 mm thick, in cement mortar (1:6), complete all as specified and directed. |
| 119 | M&L preparation of new steel surface of any description over 10cm width or girth and applyingtwo coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed. |
| 120 | M&L machine cut mirror polished kota stone slab flooring20-25mm thick over including 20mm thick cement screed base in CM 1:6 laid and jointed with grey cement slurry mixed with pigment dto match the shade of the slab including round nosing at corners, rubbing and mirror polishing complete as specified and directed. |
| 121 | M&L for machine cut mirror polished kota stone slab 20-25mm thick as in riser of steps, skirting, dado and pillar laid over and including 15mm thick cement screed base in CM 1:4 laid and jointed with gray cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete as specified and directed. |
| 122 | S&F pressed steel frames size 115mm x 60mm for door with one or more rebates including necessary fixing lugs, hings, lock stike plate etc complete all as specified and directed. |
| 123 | M&L for PCC (1:2:4) type B1 (using 20mm graded crushed stone aggregate) for fixing of hold fast/filling pressed steel door frame including necessary form work complete all as specified and directed. |
| 124 | S&F 30mm thick flush shutters, solide core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified. |
| 125 | S&F 35mm thick 2nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats complete all as specified and directed by Engr-in-charge. |
| 126 | S&F mild steel sliding door bolts, 300mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed all as specified and directed. |
| 127 | S&F galvanized mild steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staple |
| 128 | S&F 3.00mm thick sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sqm in each pane |
| 129 | Preparation of new wooden surface of any description and applying two coat of synthetic enamel paint over a coat of pink primer over 10cm width or girth. |
| 130 | S&FofSteel windows with pressed steel frame ( size 125x45x1.25mm) side hung shutter including box type hinges with steel handle, and steel peg steel complete with glazed openable shutter with glazing bar (open out side) and wire gauged openable shutter without glazing bar ( open in side) dovetailed or welded complete all as specified and directed and all as per Drg No TD/088 dt 07 jan 2002 or other size and section complete all as directed and specified by Eng-in-charge. Note:- (i) Two shutter ie wire gauged and glazed shall be fixed in one composite frame and both shutter shall be measured as one unit on this item. (ii) Rate for filling of PCC in frame and fixing of holdfast deemed to be included in quoted rate. (ii) MS grill shall be measured and paid seperatly under relevant item of schedule |
| 131 | S&F framed work such as grill grating etc with end of bars shouldered and/or riveted welded or forged into spikes framed guard bars iron doors ladders framed bullesters walk ways railings, frame work of water tanks and similar work confirming to Fe-410. |
| 132 | M&L applying two coats of synthetic enamel paints on new steel surfaces over a cot of red oxide promer including preparation of surfaces all as specified and diected |
| 133 | Taking down carefully copper/ aluminium point wiring ie. light, fan, socket or power/pointscomplete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fittings etc. and removing the items from site to store for taking credit (Credit for above items should be made as per conditions seperately) and making good disturbed surfaces of ceiling, walls, floors, etc complete all as specified and as directed. |
| 134 | Disconneting and taking down for main switch / MCB DBs including MCBs etc of any size and removing the items from site to store for taking credit (Credit for above items should be made as per conditions seperately) and making good distrbed surfaces to match with the existing surfaces of walls, floors etc complete all as specified and as directed. |
| 135 | Disconnecting electric connections and taking down for ceiling fans dismantling blades and removing fan and blades to store for keeping in safe custody for BER Board complete all as specified and as directed. |
| 136 | M & L in replacement of point wiring using proper colour coding complete all as specified with 1.5 sqmm PVC insulated FRLS/FR-LSZH unsheathed 1100 volts multistranded copper conductor two single core cable (Red and Black colour) confirming to IS 694:1990 Part-II with and includingnon metalic rigid PVC Conduit 25mm dia medium grade with all accessories including cutting chases pinning in, for concealed conduit wiring in wall/ceiling/floor/roof etc, making good of disturbed surface not exc 15cm girth, modular metal flush box or modular sunk pressed steel terminal box not less than 2mm thick, 50mm deep, covered with modular white cover plate (Outer cover) with frame (inner) including 1.5 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor one single core cable (Green colour) confirming to IS 694:1990 Part-II as continuous earth wire connected to common earth dolly all as specified and as directed for the following:-(a) One light/fan/exhaust fan point controlled by one modular switch.NOTE :- (i) Circuit conductor from MCB DB to Switch boards should not be less than 2.5sqmm. (ii) Modular white cover plate (Outer cover) with frame (inner) etc shall be measured and paid seperately under respective items. |
| 137 | (b) -Ditto- all as per above Sch \"A\" Item No.134.00 but one 3 pin modular socket outlet 5 Amp on the same board with other switch. |
| 138 | (c) -Ditto- all as per above Sch \"A\" Item No. 134.00 but one 3 pin modular socket outlet 5 Amp independent board. |
| 139 | (d) -Ditto- all as per above Sch \"A\" Item No. 134.00 but one 3 pin socket outlet 15 Amp independent board with 2.50 sqmm PVC insulated FRLS unsheathed 1100 volts multistranded copper conductor single core cable (Red, Black and green colour) confirming to IS 694:1990 Part-II. |
| 140 | S & F in replacement of Modular white cover plate with frame 1 Module complete all as specified and as directed. |
| 141 | S & F in replacement of Modular white cover plate with frame 2 Module complete all as specified and as directed. |
| 142 | S & F in replacement of Modular white cover plate with frame 3 Module complete all as specified and as directed. |
| 143 | S & F in replacement of Modular white cover plate with frame 4 Module complete all as specified and as directed. |
| 144 | S & F in replacement of Modular white cover plate with frame 6 Module complete all as specified and as directed. |
| 145 | S & F in replacement of Modular white cover plate with frame 8 Module complete all as specified and as directed. |
| 146 | M & L in replacement of modular switch, 1 way 6 Amp, 1 module |
| 147 | M & L in replacement of modular switch, 1 way 16 Amp, 1 module |
| 148 | S & F in replacement of modular socket 6Amp, 2/3 pin, combined 2 module. |
| 149 | S & F in replacement of modular socket6A/16A, 2/3 pin combined 2 module. |
| 150 | S & F in replacement of ceiling rose, 3 phase/ PVC/ polycarbonate, isolated body of size. |
| 151 | S & F in replacement of Lamp holder (Batten/Angle) PVC/Polycarbonate type with back plate for batten/angle fittings, complete all as specified and directed. |
| 152 | S & F in replacement of Lamp LED ADORE PLUS 1 x 9 Watts, CDL, 3 Star rating,heat sink white with Polycarbonate diffuser, B-22 base cap, retrofit type, 220/230 volts, complete all as specified and directed. |
| 153 | Supply and fixing in replacement of LED lights fitting 1x 20 Watts (T-8), 4 feet long, 220V, AC, decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose, prewired complete with two Nos of PVC box of size 75x75x20mm for mounting light fittings, complete all as specified and as directed. |
| 154 | S & F in replacement of LED light fitting 1x9W/1X10W Bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size with LED Lamp 1 X 9/10watts, complete all as specified and as directed. |
| 155 | S & F in replacement ofSupply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. |
| 156 | Supply and fixing in replacement ofCeiling fan 1200mm sweep, complete with blades, down rods, Electronic regulator and accessories, 230 V, Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) including connecting up with three core flexible copper conductor cable for suitable size, complete all as specified and as directed. |
| 157 | S& F in replacement of sheet metal enclosures MCB SPN DBs 8 Way, 240 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phase, including connection, testing and making good the disturbed surfaces complete all as specified and as directed. |
| 158 | S& F in replacement of miniature circuit breaker (MCB), Single Pole & Neutral 40 to 63 Amp, rating 240V, 10 KA current carrying capacity, \"C\" curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed. |
| 159 | S& F in replacement of miniature circuit breaker (MCB), Single Pole 6 to 32 Amp, rating 240V, 10 KA current carrying capacity, \"C\" curve fixing in the MCB DB complete with connection testing and commissioning, complete all as specified and as directed. |
| 160 | S& F in replacement of GI Bracket made out from GI pipe 25/32mm dia bend to shape as required, 1.2Mtr long fixed on wall with flat iron clamps of size 25 x 4mm - 2 Nos with the help of bolts, nuts, washers etc for fixing of security light fitting, complete all as specified and as directed. |
| 161 | Supply and fixing in replacement of Decorative wall light fixture made up of Polycarbonate, suitable for 1 x 9 Watts, retrofit LED lamp, B22 base, CITY-2, 220 Volts, AC, complete all as specified and as directed. |
| 162 | S & F in replacement of LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V, AC, Recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cable of suitable size from ceiling rose, complete all as specified and as directed |
| 163 | M&Lin replacement of sub main wiring with two single core PVC insulated unsheathed FRLS/FR-LSZH copper conductor 1100 volt grade multistandard conformng to confirming to IS 694:1990 Part-II of size 4.0 sqmm and drawn through & including concealed rigid non metalic PVC conduit not less than 25mm dia medium grade with all accessories fixed on wall/ceiling/surface (ISI marks), one run of 4.0 sqmm copper wire for earth continuity wire and connected of common earth dolly including cutting chases pinning in, for concealed conduit wiring and making goods of disturbed surface not exc 15 cm girth complete all as specified and as directed. Note:- One run of rigid non metalic PVC conduit 25mm dia medium grade, three run of 4.0 sqmm copper conductor is measured as one unit. |
| 164 | Supply and fixing in replacement of Wall mounting fans 230 volts, single phase, 50Hz 1450 RPM, Oscillating 400 mm sweep suitable for wall mounting, made of metal body, Copper winding including connecting up with three core flexible copper conductor cable for suitable size and wall mounting fastener bolt nuts & washers etc, complete all as specified and directed. |
| 165 | S& F in replacement of Sheet metal enclosure 20Amp SP (2P+E) with Metal plug and socket DBs suitable for protection of appliances like AC/Geysers etc complete with one MCB single pole 20Amps, 240Volts including connection, testing and making good the disturbed surfaces, complete all as specified and as directed. |
| 166 | M&Lfor Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No. 3 of SSR PT- I testing on completion with & incl. 15 mm bore lightgrade GI protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) type B1 cover slab with one handle made out of 8mm dia round bar, watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & charcoal alternative layers, necessary excavation earth work, including earthing test point all as specified or indicated including testing on completion and as directed. |
| 167 | S & F 30 HP Submersible pump with motor 40 mtr head including 40 mtr submersible cable of suitable size, 415 volt 3 phase electric driven all as specified and directed. |
| 168 | S&F for MS Column pipe heavy grade with all fittings laid in floors or fixed to walls and ceilings etc of size 100 mm nominal bore having wall thickness not less than 8mm, electric resistance welded with MS flanged 16 mm thick heavy duty confirming to IS, including 2 mm thick rubber sheet and steel nuts and bolts 10 mm long with washer, complete all as specified and as directed. |
| 169 | S & F for CI Sluice valve class PN-1.6 heavy duty flanged ends drilled ISI marked confirming to IS: 14846 suitable for 100 mm (4”) bore pipe, wheel operated (Handle) with high tensile stainless steel spindle, including nuts, bolts and jointing with jointing materials etc, including making arrangement for safe working complete all as specified and directed. |
| 170 | S& F in replacement of sheet metal enclosures MCB SPN DBs 4 Way, 240 Volts, 50Hz, AC, double door suitable for flush mounting and surface mounting with 200 Amp copper bus bar for phase, including connection, testing and making good the disturbed surfaces complete all as specified and as directed. |
| 171 | M & L in replacement Earth continunity conductor or main earth ing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of 4.00 mm dia GI or steel wire all as specified. |
| 172 | Taking down old service connection/UG Cable removing of site complete all as directed. |
| 173 | Supply and laying with commissioning and testing XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade of size 10 sqmm x 2 core laid in trenches, passing through pipes, fixed on walls complete including connecting properly by means of thimbles etc, complete all as specified and as directed. |
| 174 | Excavating in trenches, not exc 1.5 m wide and not exc 1.5 m in depth for laying of electric cables or water pipe etc, not exc 10 sqmm on plan and not exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed by Engineer-in-Charge. Note : Rates includes removing of paver blocks carefully and stack properly for refixing after laying of cables . |
| 175 | Returning filling in including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft/loose soil. |
| 176 | Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting pointcomplete all as specified. |
| 177 | Material and labour for river washed and screened, dry sand for cushioning of cable in trenches for cable protection including spreading, leveling and hand punning complete all as specified in SSR Part-I and as directed. Note :-Only compacted thickness of sand will be measured and paid separately. |
| 178 | Supply, laying un-reinforced precast concrete cable cover class LV type 1flat size 250mm x 150 mmx 40 mm. |
| 179 | Material and labour for Horizontal directional drilling (HDD) is a streeable trenchless method of Laying (installing) underground cables in a shallow arc along a 40mm/50mm bore path by using a surface-launched drilling rig, with minimal impact on the sorrounding area complete all as specified and as directed by Engr-in-charge. |
| 180 | M&L for GI pipe ,light grade 40mm dia for road crossing of cable for cable protection laid in trenches or above ground surface, complete all as specified and directed. |
| 181 | M & L in replacement Earth continunity conductor or main earth ing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc. as required of 4.00 mm dia GI or steel wire all as specified. |
| 182 | Supply, laying, conecting and testing of ISI marked GI steel water tubing medium grade including S &F all fittings and fixed complete to walls and ceiling or laid in floors complete of following sizes :- |
| 183 | 25 mm bore |
| 184 | S&F 25 mm bore Gun metal globe valve or gate valve with iron wheel head, screwed both ends with 01 No union for iron pipe heave duty with ISI marked all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
