|
| 1 | Taking up or down20 mm bore tubingand connections and removing off the site all as specified and as directed. |
| 2 | Supply and laying of CPVCpipes20 mm dia outer boreSDR 11 &plain CPVC SDR 11with all special fittings onwalls /ceilings or laying in floors complete all as specified and as directed. |
| 3 | Supply and fixing 20 mm outer dia CPVC Male Brass Threaded Adaptor (MTA/MBTA) complete all as specified and as directed. |
| 4 | Supply and fixing 20mm outer dia CPVC pipes brass Elbow complete all as specified and as directed. |
| 5 | Supply and fixing 20mm outer dia CPVC pipes brass Elbow (3/4 X1/2) complete all as specified and as directed. |
| 6 | Supply and fixing 20mm outer dia CPVC female brass adaptor (FTA/FBTA) complete all as specified and as directed. |
| 7 | Supply and fixing 20 mm outer dia CPVC Brass Tee complete all as specified and as directed. |
| 8 | S&F for 20mm bore CPVC Brass Union complete all as specified and as directed. |
| 9 | S&F for20 mm bore CPVC Tank Adaptor complete all as specified and as directed. |
| 10 | S&F in repair25 mm cpvc ball valve / Gate valvescrewed both ends for cpvcpipe complete all as specified and as directed.. |
| 11 | S&F Ball brass valve high pressure of polyethylene float and fly nut complete screwed for iron pipe and fixed, cast copper alloy with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule etc and fixed of 25mm bore complete all as specified and as directed. |
| 12 | Dismantling of plain or corrugated steel sheeting any gauge thickness or similar pattern roof coverings complete all as specified and as directed. |
| 13 | S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as manufacturers instruction complete all as specified and as directed. |
| 14 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws asin ridges, hips, valley gutter, drip, and straight flashing all as specified and as directed. |
| 15 | M & Lfor Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings (length and girth as fixed) of thickness 1.25 mm complete all as specified and as directed. |
| 16 | Dismantling wrought iron or mild steel work of any description not other wise provided for, complete all as specified and as directed. |
| 17 | M&L Roof trusses (framed), trusssed, purlings, crane gantries, rails and fasternings and heavy breacket frasming(Beam,tee,angle,Channel, hollow sec or flat sections) including distance pieces, cleates etc. complete all as specified and as directed. |
| 18 | S & F Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment confirming to Fe-410 W (Grade E-250) quality A complete all as specified and as directed. |
| 19 | M & L for providing cement concrete type B1 (1:2:4) using 20 mm graded aggregate as in copings,apex stones,bed plates etccomplete all as specified and as directed |
| 20 | M&L for preparing new steel or iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and as directed. |
| 21 | Dismantling of ceiling boarding in description fixed in any position with nails complete all as specified and as directed. |
| 22 | S&F aluminium flatas wind tie fixed with 50mm/75mm aluminium self tapping screws complete all as specified and as directed. |
| 23 | S & F in repairs anodized aluminium grid work 605 x 605 mm with using 36.5mmx23.5mmx1.5mm thick main tee, 23.5 x23.5mmx1.28mm cross tee and 25x25x1.5mm angles fixed to perimeter of wall for false ceiling including hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed. |
| 24 | M&L 4mm thick Non asbestos fibre cement building boards fixed or laid / inserted to timber/ GI / Aluminium framework with screws complete all as specified and as directed. |
| 25 | Taking down chowkats or frames exc 1.5 Sqm and not exceeding 4 Sqm (with shutters and grill (if fixed) without taking off shutters from the frame) complete all as specified and as directed. |
| 26 | S&F for Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 45 x 70 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2 , modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 27 | S&F Factory made single 30 mm thick extruded WPC (Wood Polymer Composite) solid moulded flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed. (Note: stainless steel butt hinges and necessary S S screws incl in this item) |
| 28 | S & F second class hard wood 35 mm thick glazed and skeleton shutters open rebated and prepared to receive glass, gauge etc divided in to squares with plain, chamfered or rounded, mitred and rebated sash bars fitted with cut and mitred beads for securing glass etc complete all as specified and as directed. |
| 29 | M&L preparation of new wood/wood based surfaces of exc. 10cm width or girth of any description and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 30 | S&F Aluminium anodised sliding door bolts 300mm long with hasp and staple complete all as specified and as directed. |
| 31 | S&F aluminium anodised barrel tower bolt of extruded section 150mm long complete all as specified and as directed. |
| 32 | S&F extruded aluminium alloy handle fabricated type anodised 150mm long complete all as specified and as directed. |
| 33 | S & F butt hinges of stainless steel 150 mm long ISI marked fixed with brass screws complete all as specified and as directed. |
| 34 | S & F 100mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring. Fixed in floor complete all as specified and as directed. |
| 35 | S&F for factory made single extruded 18/19 mm thick WPC (Wood Polymer Composite) solid board one side white color and other side of board laminted with PVC foil of minimum 14 micron thickness of approved design pasted with hot melt adhesive for cup boards, work stations and bathroom/kitchen cabinet etc. of required sizes comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/ borer proof, water/moisture proof and fire retardant and fixing with stainless steel piano hinges/soft close clip on concealed hinges of required size with necessary full body threaded star headed counter sunk S.S screws etc., complete all as specified and as directed.NOTE:- All joint should be filled with sealant |
| 36 | S&F extruded aluminium alloy handle fabricated type anodised 100mm long complete all as specified and as directed. |
| 37 | S&F for contunoius (piano) hinges , mild steel , bright finish orelectrogalvanishedand width offlaps 30 mm (when open) etc., complete all as specified and as directed. |
| 38 | Demolition of precast concrete block walling built in Cement Mortar including all quoins arches pillars etc complete all as specified and as directed. |
| 39 | M&L precast cement concrete block masonry with solid block, exc 10cm in width in PCCtype C-1, 1:3:6 (using 20mm graded stone aggregate) set in CM (1:6) complete all as specified and as directed. |
| 40 | M & L for rendering15mm thick in CM 1:6 (Total 15 mm thick) on concrete or brick masonry surfaces including mixing water proofing compound as per manufacurers instructions and finishing the top surface even and fair complete all as specified and as directed.Note: Water proofing compoundwill be measured and paid separately. |
| 41 | Supply only Integral water proofing compound. |
| 42 | M&L for interconnection of nozzles, foam jets, valves, UPVC pipes, under water lights, LED drivers with proper design and including providing water proof tapes, supports etc., including testing and commissioning complete all as specified and as directed.Note : The items nozzles, foam jets, UPVC pipes, under water lights shall be measured and paid separately. |
| 43 | Supply only chromium plated brass diamond jet nozzle of size 1\" dia complete all as specified and as directed. |
| 44 | Supply only chromium plated brass foam jet nozzle of size 1/2\" dia complete all as specified and as directed. |
| 45 | Supply only RGB type LED under water light fittings stand type comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 980 lumens having secondary optics min wattage 12 watt with ingress protection IP 68 THD less than 10%, CRI>80, PF>0.9, IK>08, SPD of capacity 10 KV complete all as specified and as directed. |
| 46 | Supply only RGB type LED under water light fittings suitable for fixing on foam jet type nozzle comprising of epoxy powder coated housing, enclosed with glass cover in frame with lumen output not less than 980 lumens having secondary optics min wattage 9 watt with ingress protection IP 68 THD less than 10%, CRI>80, PF>0.9, IK>08, SPD of capacity 10 KV complete all as specified and as directed. |
| 47 | Supply only LED driver suitable for under water lights, transformer type of min wattage 105W, 220V AC as incoming and 12V as outgoing, 50Hz with ingress protection IP 68 complete all as specified and as directed. |
| 48 | Supply only CPVC pipes outer diameter 20mm SDR 13.5 pipes & plain CPVC SDR 11 fittings complete all as specified and as directed. |
| 49 | Supply only CPVC pipes outer diameter 50mm SDR 13.5 pipes & plain CPVC SDR 11 fittings complete all as specified and as directed. |
| 50 | Supply only CPVC ball valve suitable for CPVC pipes outer diameter 50mm complete all as specified and as directed. |
| 51 | Supply only CPVC ball valve suitable for CPVC pipes outer diameter 20mm complete all as specified and as directed. |
| 52 | Supply only flat three core PVC insulated& PVC Sheathed copper conductor of size 4 sqmm for submersible pump motors 1100 volt complete all as specified and as directed |
| 53 | Supply only flat three core PVC insulated& PVC Sheathed copper conductor of size 1.5 sqmm for submersible pump motors/ lights, 1100 volt complete all as specified and as directed |
| 54 | Supply, install, testing and commissioning Pumping sets 15 HP, submersible, electric driven, 415 Volt complete all as specified and as directed. |
| 55 | Supply, install, testing and commissioning Pumping sets 3 HP, submersible, electric driven, 415 Volt complete all as specified and as directed. |
| 56 | S&F Digital timer with C&T manual time switch, contactor pre wired distribution board complete time lite 63A 3 pole 415V complete all as specified and as directed. |
| 57 | S&F Star Delta motor starter 15 HP comprising of steel body with powder coated paint, 415V, 11.2KW, 50Hz including circuit breaker suitable contactor overload relay with start and stop button for manual control including indicator lamp complete all as specified and as directed. |
| 58 | S&F DOL motor starter 3 HP comprising of steel body with powder coated paint, 415V, 2.4KW, 50Hz including circuit breaker suitable contactor overload relay with start and stop button for manual control including indicator lamp complete all as specified and as directed. |
