|
| 1 | Demolition of PCC/lime Concrete of any description and in anypositionnot otherwise specifically provided foretc complete all as specified and as directed by the Engineer-in-Charge. |
| 2 | M&L for P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in padding over roof finished and laid to required slope complete all as specified and as directed by the Engineer-in-Charge. |
| 3 | Cutting grooves in brick wall75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | M&L, roughening surfaces of old concrete roof by picking ,sweeping clean and washing down with water to remove dust etc and applying a coat of cement slurry @ 3 Kg per Sqm complete all as specified and directed by the Engineer-in-Charge. |
| 5 | M&L for 10 mm thick rendering in cement mortar 1:4 on concrete surfaces when concrete is stilgreen finished even and fair including mixing ofwater proofing compound as per manufacturer instructionetc complete all as specified and as directed.Note :- Water proofing compound shall be measured separately as supply only in item no 08 |
| 6 | Supply only Liquid water proofing compound complete all as specified and as directed of as per manufacturer instruction. |
| 7 | M&L applying water proofing treatment with the following(a) First coat of bitumen primer conforming to IS-3384 @ 0.3Kg / sqm to be applied on prepared surface till the surface is properly impregnated.(b) after the application of approved bituminous primer the water proofing memberne minimum weight 3kg/sqm and minimum 3mm thick reinforced with polyesterd non woven fabric (weight not less then 160gms/sqm) shall be laid on the primed surface by torch application method as per manufactured instruction.(c) All joints and change in direction should be curved with cement mortar (1:3) mixed with SBR latex @ 200ml per bag on cement and cured well before laying of membrane including Aluminium paint on top surface( d ) M&L for preparation of newly surface of APP membrane and applying two coat of bituminous aluminium paint @200 gm /sqm etc complete all as specified and as directed. |
| 8 | Taking up or down existing 15mm bore steel tubing/PVC and connections including cleaning for refixing or removal complete all as specified and as directed. |
| 9 | Taking up or down existing 20mm bore steel tubing/PVC and connections including cleaning for refixing or removal complete all as specified and as directed. |
| 10 | Supplying, fixing, jointing and testing of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings 15/16mm dia borewith all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in trenches/wall/ceiling complete all as specified and as directed. |
| 11 | Supplying, fixing, jointing and testing of CPVC pipe SDR 11 and plain CPVC SDR 11 fittings 20mm dia borewith all fitting such as bends, elbow, socket, reducer etc and fixed to wall or laid in trenches/wall/ceiling complete all as specified and as directed. |
| 12 | Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc., and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cuttingexceeding 10 cm but not exceeding 20 cm girth in brick walls complete all as specified and as directed. |
| 13 | Dismantling water tanks and removing to store of steel/PVC of capacity including 500 ltr but not exceeding 1000 Ltr complete all as specified |
| 14 | S & F 1000ltr rotational moulded polyethylene water storage tanks,(cylindrical vertical with closed top) hoisted and fixed in position, all as specified in SSR part I-1991 including 20 mm dia GI pipe light grade washout pipe 450 mm long with plug and 20 mm dia GI pipe light grade over flow pipe 600 mm long with fitting and dismantling of existing unserviceable tank and removing from site, complete all as specified and directed. |
| 15 | S&F in rep 20mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (Minium weight 210 gms ), complete all as specified and directed |
| 16 | S & F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and as directed. |
| 17 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises and complete all as specified and as directed. |
| 18 | M&L for 15mm thick screed bed or bedding layer in CM 1:6,complete all as specified and directed. |
| 19 | M&L, for PCC 1:2:4 type B-0 using 12.5mm gradesd stone agg as in levelling course of floors of 25 mm thick complete all as specified and directed. |
| 20 | M&L for non skid dark coloured ceramic tiles 7 to 10 mm thick (square / rectengular) area of each tile exceeding 0.36sqm but not exc 1.00 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etccompleteall as specified and as directed. |
| 21 | M&L for dark coloured ceramic glossy tiles 7 to 10 mm thick (square / rectengular) area of each tile exceeding 0.36 sqm but not exc 1.00 sqm, in floors etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etccompleteall as specified and as directed. |
| 22 | M & L rendering 10mm thick in cement mortar (1:3) on fair faces of brick work or concrete surfaces as in vertical surfaces for receiving tiles completeall as specified and as directed. |
| 23 | M&L for dark coloured ceramic glossy tiles 7 to 10 mm thick (square / rectengular) area of each tile exceeding 0.36sqm but not exc 1.00 sqm, in skirtting/dado etc. set and jointed in neat cement slurryand pointed in white or coloured cement to match to floor etccompleteall as specified and as directed by the Engr-in-Charge. |
| 24 | M&L for 17-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 20 mm thick in CM(1:6) etc completeall as specified and as directed. |
| 25 | Demolition of cement concrete(un reinforced) of any description in any position not otherwise specifically provided for etc. complete all as specified and directed. |
| 26 | M&L for 75mm thick cement concrete1:3:6 type C-1(using 20mm graded aggregate) as in plinth protection finished even and smooth without using extra cement complete all as specified and directed |
| 27 | M & L Machine cut kota stone slab flooring 18-20mm thick over and including 20mm thick cement screed bed in CM 1:6 laidand jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed by Engr-in-Charge. |
| 28 | M & L Machine cut kota stone slab flooring 18-20mm thick in riser of steps,skirting, dado & pillar over and including 10mm thick rendering in CM 1:4 laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 29 | Demolition ofBrickwork of stone/boulder masonry, build in lime mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articlesl etc complete all as specified and as directed. |
| 30 | M&L brick work with sub class \"B\"brick straight or curved on plan exc 6m mean radiusbuilt cement mortar 1:4 complete all as specified and as directed. |
| 31 | Taking down cement plaster on brick or stone wall including raking out joints, hocking for key scrubbing down with water etc complete all as specified and as directed. |
| 32 | M&L for rendering 10mm thick on fair faces of wall even and fair finish without using extra cement onconc/brick surfaces in CM 1:6, complete all as specified and as directed. |
| 33 | M&L renderig 5mm thick in cement mortar 1:3 on ceiling surface and finished even and smooth with out using extra cment complete all as specified and as directed. |
| 34 | M&L for rendering 15mm thick on fair faces of wall even and fairfinish without using extra cement onconc/brick surfaces in CM 1:4, complete all as specified and as directed |
| 35 | M&L for complete removal of existing treatment of any description from wall all as specified and directed. |
| 36 | M&L for complete removal of existing treatment of any description from ceiling all as specified and directed. |
| 37 | M & L for applying two coat of oil bound distemper on old or new wall surfaceover applying 3 mm thick wall care water proof putty in three layers on wall suface as per manufacurers instructions etccomplete all as specified and as directed by the Engr-in-Charge. |
| 38 | M&L for applying two coat of white wash on ceiling surface complete all as specified and directed. |
| 39 | Material & Labour for applying two coaton old or new surface of wall of 100% Premium acrylic exterior weather proof paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm overapplying 1 mm thick wall care water proof putty on wall sufacecomplete all as specified and as directed by Engr-in-Charge. |
| 40 | M&L for preparing for old steel surfaces and applying two coats of synthetic enamel paint over 10 cm width or girth complete all as specified and as directed. |
| 41 | M&L for preparation old wooden surface of any description not otherwise described over 10 cm width or girth and applying two coat synthetic enamel paintetc complete all as specified and as directed by the Engr-in-Charge. |
| 42 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame)exe 1.5 Sqm but n exc 4 Sqm each etc complete all as specified and as directed |
| 43 | Taking down chowkhat or frames with shutters (without taking off shutters from the frame) not exe 1.5 Sqm each complete all as specified and as directed. |
| 44 | Taking down shutters of any description exc 1 sqm and n.exc 2 Sqm each etc complete all as specified and as directed |
| 45 | Refixing shutter of any description exc2 Sqm each in same opening etc complete all as specified and as directed |
| 46 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 100 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 47 | S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size30mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. (all as directed and specified by Engineer-in-Charge. |
| 48 | S & FFactory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 65 x 125 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardant and fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge.Note: stainless steel butt hinges 03 Noswith with 32mm long SS screws and Other hardwares should be fixed with 19*6mm size steel screws etc.Note: For WPC solid door/window frames, minus 5mm tolerance in dimension i.e. depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made |
| 49 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size35mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of EngineerIn- Charge. Note: Each shutter shiould be fixed with stainless steel butt hinges 03 Noswith 32mm long SS screws and Other hardwares should be fixed with 19*6mm size steel screws etc. |
| 50 | S&F 35mm thick FACTORY MADE WIRE MESH SOLID WPC both side Plain DOOR SHUTTER consisting of Density 650 Kg /Cbm Manufactured by an ISO-9001-2015 certified Company, Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose. (confirming as per S:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. S.Sbutt hinges size 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube. Other hardwares should be fixed with 19*6mm size steel screws etc. Complete as per direction of Engineer-in-charge, manufacturer\"s specification & drawings. complete all as specified and directed. |
| 51 | Cutting holes in brick walls built in cement mortar for inserting hold fasts , inclduing iron hold fastand making good dismantled portion in CM 1:3 or cement conc 1:2:4 type B1 as required exc half brick but not exc full brick wall complete all as specified and as directed. |
| 52 | M & L second class hardwood Plain, solid, straight chowkats and frames wrought framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints,complete all as specified and as directed. |
| 53 | M&L, aluminium powder coated/Anodised aluminiumframe for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed. |
| 54 | M&L foraluminium powder coated/Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. S & F 5.5 mm thick tinted glass in panel of shutter fixed with glazing clips , rubber gasket and powder coated aluminium snap beading so as to make air tight and including S & F powder coated butt hinges type C-1,100 mm size 3 nos per shutter , powder coated aluminium handle of 150mm size 2 Nos (One on each side of shutter) , powder coated aluminium tower bolt of size 200 mm ( 2 Nos ) per shutter ,mortise lock , brass body ,6 levers ( 1 No) with duplicate keys, aluminium (extruded section) hydraulic door closer regulated designation No-3 Universal type ( 1 No) & Floor door stopper ( 140 mm ) overall ,aluminium body 1 No on each shtteretc complete all as specified and as directed. Note: (i) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer . (ii) The minimum thickness of powder coating shall be 50 Micron complete all as specified |
| 55 | S&F powder coatedaluminium sliding window/ventilator shutter three track section for frames of weight not less then 1.17 kg/Rm and sliding section for shutter frame all round with aluminium section of weight not less then 0.42 kg/Rm top and bottom rail of shutter of weight not less than 0.368 Kg/m in two pannels and shutter with including necessary aluminium fittings and 5mm thick selected quality tinted glass and third one with and incl stainless steel wiremesh etc cover aluminium decogrill as approved by GE fixed with standed aluminium channel out side with incl handle cleat, glazing clip special auto lock dry set rubber gasket complete all as specified and as directed NOTE : (i)The minimum thickness of powder coating shall be 50 micron. (ii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer. |
| 56 | S&F for powder coated side hige type aluminium window with double shutter (one glazed & one gauzed) incuding fabricated out frame work of required size and frame having weight not less then1.6Kg/RM without sash bars made of shutter section weighing 0.55 Kg/m including providing necessary powder coated aluminium fittings like joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays150mm long (1 Nos), hinges types C-21, 100 mm long (02 Nos) aluminium handle (01 Nos) per shutter etc including 4.80mm thick plain selected quality glass, stainless steel steel wire cloth 0.36mm dia steel wire and apperture 1.40mm etc complete and as directed. NOTE : (i)The minimum thickness of powder coating shall be 50 micron. (ii) Cost of all fittings & fixture shall deemed to be included in unit quoted rate by the tenderer. |
| 57 | S&F aluminiumwire cloth 0.63 mm nominal dia of wire and avg width of a-pertare 1.40 mm fixed with tinned tacks or galvanized wire staples etc complete all as specified and as directed. |
| 58 | S&F stainless steeltower bolts of extruded section & fixed 150 mm long etc complete all as specified and as directed |
| 59 | S&Fstainless steelcast type anodized 150 mm size etc complete all as specified and as directed |
| 60 | S&F 300 mm longstainless steelsliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast- aluminium alloy. |
| 61 | S&F in repair vitreous china squatting pan “ORISSA” pattern size 58X 44 (CM) star white Make :- Hindware with P or S trap front or back inlet with integral foot rest (excl flushing cistern & flush pipe) &including connection to trap & to flushing pipe anti syphonage pipe etc complete including making good to floor complete all as specified & as directed. |
| 62 | S & F in repair 10 ltrs capacity PVC low level flushing cistern sleek plus single flush of colour star white with inlet, float valve and handle with 32 mm dia PVC pipe 600 mm long complete all as specified and as directed. |
| 63 | S & F in repair Vitreous China Ware Wash hand basin white, flat back, size 550 x 400 mm size(flat back or angle back type)including cutting for and pinning ends of brackets or erecting stand and waste pipe. |
| 64 | S & F 3mm looking Mirror glass of selected quality glass, fixed with stainless steel/Chrominum plated screw/nut and cup washer complete all as specified and directed by the Engr-in-Charge. Make : Prayag/Prima/Modi |
| 65 | S&F in repair PVC connections 15mm size with PTMT nuts of length 450mm etc complete all as specified and as directed. |
| 66 | S&F in repairs 15mm dia Concealed stop Cock regular body 15mm with flangecomplete all as specified and as directed. |
| 67 | S&F in repair 15mm bore cast copper alloy chromium plated angle cock with flangecomplete all as specified and as directed. |
| 68 | S&F in repair 15mm bore fancy type chromium plated bib cock long body with flangeetc complete all as specified and as directed. |
| 69 | S&F brass CP mixer 15mm dia bore mixing hot & cold water for wash hand basin screwed down for iron pipe and fixedall as directed. |
| 70 | S&F in repair PVC floor trap outlet dia 75mm with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) complete all as specified and as directed. |
| 71 | S&F in repair Brass cromium plated towel rail 20mm dia, D type, 60cm long between flanges complete all as specified and as directed |
| 72 | S&F in repair 125 mm Brass chromium plated shower rose with or without swivel joints, any size, including fixing of steel pipe or union and fixed complete all as specified and as directed. |
| 73 | S&F stainless steel kitchen plate rack overall size 900mm x 900mm make out of 0.80mm thick stainless steel sheet etc complete all as specified and as directed. |
| 74 | S&F in repair stainless steel sink with drainage board 1.00mm thick for kitchen or laboretory with plug, waste pipe, coupling, washers also incl cantilever cast iron brackets connecting union etc, overall size 915x460mm with bowl size 410x330x160mm complete all as specified and as directed. |
| 75 | Supply and fix in repair CP corner glass shelf with bracket fixed with screws complete all as specified and as directed by Engineer-in-Charge . |
| 76 | S&F in repairCP Brass soap dish fixed to wall with cp brass screws etc complete all as specified and as directed by the Engineer-in-Charge |
| 77 | S&F in repair 25 mm dia chromium plated curtain rod with CP brackets and knobs at both end as per sample approved by Engineer-in-charge. |
| 78 | Demolition and breaking up drain pipes (Salt glazed ware, AC/PVC/CI or Reinforced concrete) set in cement mortar in floors or wall in 100mm dia meter complete all as specified and as directed. |
| 79 | S &F of 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or wall and complete all as specified and directed. |
| 80 | S &F of 75mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors or walland complete all as specified and directed. |
| 81 | S&F PVC (SWR) bends any radius 110mm bore complete all as specified and as directed. |
| 82 | S&F PVC (SWR) bends any radius 75mm bore complete all as specified and as directed. |
| 83 | S&F PVC (SWR) junction single, (single T) equal or unequal 75mm bore with access door complete all as specified and as directed. |
| 84 | S&F PVC (SWR) junction single, (single T) equal or unequal 110mm bore with access door complete all as specified and as directed. |
| 85 | S&F PVC (SWR) vent cowl 110mm bore complete all as specified and as directed. |
| 86 | S&F MS chromium plated peg set of five fixing with wall complete all as specified and as directed. |
| 87 | S&Ffalse ceiling with 4 mm thick non asbestos fibre cement building boardwith all four edges sealed with PVC filmof size 600 x 600 mm (595 X 595 mm) fixed with clips & screws including anodised aluminium /GI snap grid frame work for false ceiling of Tee/Angle of weight not less than 150 gm per RM with slot for fixing including necessary suspender of flat iron or 4 mm dia bars of required length fixed in purlin of roof not exceeding 1.20 m both ways including all accessories required for suspending ceiling work and gypsum board complete all as specified and as directed by the Engineer-in-Charge. |
| 88 | S&F forHollow PVC Wall lining consisting of 5 mm thick plain colourPVC sheet inclusive of solvent cement and fixing at site of 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall to PVC frame complete all as specified and directed |
