|
| 1 | BOQ ITEM NO. 01 TO 43 COMMON FOR ALL JOB Excavation in trenches (soft/loose soil) not exc 1.5 m wide and not exc 1.5 m depth for foundation for mainholes, shafts etc 2. exc 10 sqm on plan area and n.exc 1.5 m in depth and getting out etc all as specified and directed. |
| 2 | M&L PCC 1:4:8 type D2 (using 40 mm graded stone aggregate) as in foundation or mass concrete etc complete all as specified. |
| 3 | M&L TMT 10mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 4 | Demolition of brick work built in cement mortar including all quoins, arches, pillars etc. complete all as specified and directed. |
| 5 | M&L brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in radius built in cement mortar 1:6 all as directed by the Engr-in-Charge. |
| 6 | M&L for brick work with old sizefly ashbricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified. |
| 7 | M&L 15mm thick rendering in (CM) 1:4 on fair surfaces of brick walls finished even and smooth without using extra cement. |
| 8 | M&L preparation of new plastered surfaces of walls and applying two coats of cement base paint complete all as specified. |
| 9 | Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations |
| 10 | S&F framed work as in ornamental doors or gates of angle or other section with gusset plates, rails, braces etc complite drilled for fixing of steel sheeting or other covering. Door etc to be prepared for hanging or sliding with and including either hookes and hinges or steel hanging door fitting (exclusive of steel, sheeting rails and guides) and hanging; also fastening and fixing complete all as specified and directed.(Fe-410-W,Gde-E-250,quality- A) |
| 11 | M&L for preparation of new steel and ironsurfaces of any description over 10 cm width or girthand applying two coat of synthetic enamel paint over a coat of red oxide/primer all as apecified and directed |
| 12 | Dismantling wrought iron or mild steel work of any description not otherwise provided |
| 13 | DismantlingAC sheet (Corrugated, Semi Corrugatedetc)as in roofs etc includingridgescomplete all as specified. |
| 14 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated sheet 0.50 mm thick of any colour having tensile str of 550Mpa as in roof covering/cladding to walls,fixed with self tapping screws as specified |
| 15 | S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 16 | Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc |
| 17 | M&L for machine cut kota stone slab flooring 19-20mm thick overcementscreed bed20 mm thick in CM 1:6, base laidand jointedwith grey cementslurry mixedwith pigmentto match theshade of theslab including rubbingand polishing complete all as specified. |
| 18 | Dismantling timber scantlings 40 sq. cm and over in section, in any position uniformed work. |
| 19 | M&L for Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc (Fe 410 -W (Gde E- 250) quality A all as specified & directed. |
| 20 | Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) |
| 21 | M&L Providing, cement concrete1:2:4 type B0in roof kerbs on edgesusing 12.5 mm graded stone aggregate |
| 22 | Demolition of Reinforced Cement Concreteworks of any description and in any position not otherwise specifically provided . |
| 23 | M&L for reinforced cement concrete 1:11/2:3 (Nominal mix)using 20 mm graded aggregates as in lintel & Chajja supported on wall smixed with liquid water proofing compound (Liquid water proofing compound to be measured paid separately) complete all as specified and directed. |
| 24 | Fromwork to chajjas, troughs and similar items including edges for rough finished surfaces of concrete complete all as specified and directed. |
| 25 | Dismantling of wall andceiling boards (fibre, pulp, insulation, etc) or insulationboards/slabs/blankets, any thickness including cover filltets complete all as specified |
| 26 | Providing and fixing of E-board \"Everest\" or equivalent make 600 x 600 x 4mm thick white prelaminated sett embosed reinforced desigener (lake & HM as approved ceiling board/tiles at all height laid on Armstrong Hot dipped Galvanised imposed grid with 24mm wide T-section exposed flanges which shall be powder coated white. The frame work will comprise of main runner made from 0.33mm thick GS sheet and of size 24x32x3000mm and spaced at 1200mm centers securely fixed to the structural soffits by approved hangers at 1200mm maximum centers. Hangers of GI wire 4mm dia to be fixed by approved rawl plugs, level and justers and screws etc. |
| 27 | Taking down chowkhat frame with shutter (without taking out shutter from the frame) n exc 1.50 Sqm and removing from sites complete all as specified and directed. |
| 28 | Taking down chawkhat frame with shutter (without taking out shutter from the frame) exc 1.50 Sqm but n. exc 4 sqm each and removing from site complete all as specified and directed. |
| 29 | Providing & fixing of vajra series windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be panelled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding, screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work including of all taxes. (Make: Elixir Met Form Pvt Ltd or equivalent or as approved by concerned GE |
| 30 | S&F 300 mm long Stainless steel sliding door bolts, plate type, stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed |
| 31 | S&F for200 mm long Stainles steel barrel towerbolts, stove enamelledblack, with bright boltand fixed of extruded section and fixed. |
| 32 | S&F 125 mm size Stainless steel handles fabricated type extruded section ,ISI marked all as specified |
| 33 | S&F Butt hinges 125 mmstainlesssteel hinges medium weight and fixed |
| 34 | Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc,all as directed. |
| 35 | M&L for rendering 15mm thick in cement mortar 1:6 on stone masonry surfaces or surfaces other than fair face of brick work of walls, finished even & smooth without using extra cement, complete, all as specified |
| 36 | M&L 15mm thick rendering in (CM) 1:4 on fair surfaces of brick walls finished even and smooth without using extra cement. |
| 37 | M&L hardcore broken stone or boulder of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface |
| 38 | M&L 100 mm thick cement concrete1:4:8 type D2 using 40 mm graded stone aggregate as in sub base of floor |
| 39 | M & L rendering 15mm thick on brick work wall/ Rcc roof in CM 1:4mixed with liquid water proofing compound finished even and smooth without using extra cement . (Liquid water proofing compound to be measured paid separately) complete all as specified and directed. |
| 40 | M&L for 75 mm thick PCC 1:3:6 type C2 using 40 mm graded stone aggregate finished even and smooth witthout using extra cement as in plinth protection/path |
| 41 | Factory made single extruded WPC (Wood Polymer Composite) solid door/ window/ Ceosetory windows & other Frames/ Chowkhat of size 50 x 75 mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/ wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/ cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum comp ressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/ moisture proof and fire retardanand fixed in position with MS hold fast/ lugs/SS dash fasteners of required dia and length complete as per direction of Engineer-in-Charge. (M.S. hold fast/ lugs or SS dash fasteners shall be paid for separately). |
| 42 | S&FFactorymade 30 mm thick 100% solid WPC (Wood Polymer Composite) solid both prelem side 14 micron Flushdoor shutter wit 10mm deep CNC moulding design ofrequiredsize comprising of virgin PVC resin of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In-Charge. (Note: stainless steel butt hinges and necessary S S screws shall be paid separately) |
| 43 | M&L preparation of newly plastered surfaces and applying two coats of cement base paint |
| 44 | BOQ Item No. 44 TO 56FOR JOB NO. LSA/DWP/01/SRW/25-26 Dismantling fencing wire mesh, any type |
| 45 | Dismantling RCC posts or struts any section, including takingout embedded portion and making good disturbed ground |
| 46 | M&LRCC 1:2:4 type B-1using 20mm graded stone aggregate as in foundation, including raft footings & columns etc complete all as specified and as directed. |
| 47 | M&L TMT 6mm dia and over cut to length, bent to shape required incl. cranking, bending and incl. mild steel wire (annealed) not less than 0.9mm dia or securing with clips. |
| 48 | Formwork to sides of footings of concrete foundation with rough finished surfaces of concrete complete all as specified and directed. |
| 49 | Formwork to sides of columns with rough finished surfaces of concrete complete all as specified and directed. |
| 50 | M&L, 20 mm thick granite (of any type and colour ) work (table rubbed and polished ) in steps, Jambs, pillars, window cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust and admixture of pigment to match with shade of granite completeall as specified. |
| 51 | Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm in any type of soil |
| 52 | M&L Cement concrete1:3:6 type C2 using 40 mm graded stone aggregate in foundations, filling and mass-concrete |
| 53 | S&F mild steel joist, channel, angle, or tee sections as in posts fixed independently, without connection plate, etc. (cut to ordinary lengths i.e. within 20mm of the length indicated) of Fe-410-W (Gde E-250) |
| 54 | Supply Chain Link MS galvanised fencing of any size and type as specified |
| 55 | Fixing only chain link fencing line wire , any mesh size and type of standards , rails , straining bolts , etc inc provision of binding wire staples or steel pins etc as directed |
| 56 | S&F MS Screw bolts (machine made) dia of neck 5 to 10mm with hexagonal or square heads at one end and screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5 cm long. |
| 57 | BOQ Item No. 57 TO 61FOR JOB NO. LSA/DWP/03/SRW/25-26 Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) and rubbish off the premises, all as specified and directed |
| 58 | S&F vitrifiedceramic tilesdark shade digital tiles/(double charged), 10mm thick (square/ rectanglar) polished , exceeding 0.18 sqm of each tiles not exceeding 0.38 sqm, in floors etc. laid over15mm thick screed bed 1:6 , set and jointed in neat cement slurry and pointed in white/coloured cementto match complete all as specified. |
| 59 | S&F exterior tiles of superior quility 300x300/400x400x10-12MM thick of approved size/design/shade set and jointed in neat cement slurry & pointed in white or coloured cement to match as in floor over and including 20mm thick screed bed in cm 1:4 complete all as specified and directed. |
| 60 | M&L for preparation of old steel and iron surfaces of any description over 10 cm in width or girth and applying one coats of synthetic enamelpaint of approved tint complete all as specified. |
| 61 | Preparation of plastered surfaces and applying two coat of distemperingwith 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer,over a coat of 2mm thick putty of required shade and colour complete, as per manufacturer\"s specification over Complete all as specified and directed |
| 62 | BOQ Item No. 62 TO 66 FOR JOB NO. LSA/DWP/02/SRW/25-26 Taking down cement plaster or cement lime plaster on PCC/stone surface/brick surfaces including raking out joints hacking for key scrubbing down with water etc,all as directed. |
| 63 | Preparation of plastered surfaces and applying two coat of distemperingwith 1st quality acrylic distemper(ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer,over a coat of 2mm thick putty of required shade and colour complete, as per manufacturer\"s specification over Complete all as specified and directed |
| 64 | Surface dressing not exc 15 Cm in soft/ loose soil. |
| 65 | Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 30mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand |
| 66 | M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in coping, all as specified and directed. |
| 67 | BOQ Item No. 67 TO 121 FOR JOB NO. LSA/DWP/01/MW/25-26 Surface dressing n exc 15 cm deep any type of soil |
| 68 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm |
| 69 | Removing excavated material n exc. 50 m and depositing where directed at a level n exc. 1.5 m above the starting point |
| 70 | M&Lfor non-Skid coloured ceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. laid over 15 mm thick screed bed in CM 1:6, set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 71 | M&L glazed coloured ceramic tiles in vertical surface 300x600mm x 7mm thick thick, laid over 15 mm thick rendering in CM 1:4, set and jointed in neat cement slurry and pointed in white or coloured cement to match |
| 72 | M&L rendering 15mm thick on brick work in CM 1:6 finished even and smooth without using extra cement |
| 73 | M&L reinforcement cement concrete1:2:4 type B1 using 20 mm graded stone aggregate as in roof slab |
| 74 | S&F mild steel TMT bar 10 and over,cut to legth bent to shape required incl cranking, binding with mild steel wire (aneaiied) not less than 0.9mm etc |
| 75 | Use & waste for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar works not exceeding 200mm thick( horizontal or sloping),flat and fair finished |
| 76 | Supply only Liquid water proofing compound complete all as spesified and directed. |
| 77 | M&L for application of high perfomance hybride polyurea elastomeric water proofing coating cold applied, liquid membrane at 1.5 kg/Sqm withan elongation minimum of 500+100% by airless spray machine and tensile strength of minimum 11-13 N/mm2 as perASTM D2370, crack bridging ability minimum of 3 to 4 mm as per ASTM C1305 , Shore Hardness of minimum 70+5 as per ASTM D2240 complete as per directed by Engr-In-Charge. The System shall also include final base preparation including cleaning of the plaster surface etc and applying epoxy primer as approved makes in two coats at a coverage of 1 kg/Sqm, etc as per manufacturer specification, complete all as specified and directed. |
| 78 | S&F anodised aluminium ventilator fixed type weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified. |
| 79 | S&F 3mm thick sheet glass ordinary quality frosted one on side and glazing with oil putty/beads in square not exc 0.5 Sqm in each pane |
| 80 | S&F Butt hinges 100 mmstainlesssteel hinges medium weight and fixed |
| 81 | S&F stainless steel barrel tower bolts 150mm of extruded section and fixed |
| 82 | S&F stainless steel handles 150mm, cast type, anodised |
| 83 | S&F forstainless steel sliding door bolt (bolt not less than 10mm dia, 150mm size) with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts of extruded section or cast slumininum alloy and fixed |
| 84 | Supplying and laying of CPVC pipes of external dia 16 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 85 | Supplying and laying of CPVC pipes of external dia 20 mm, SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed. |
| 86 | Supply and Fixing of brass Tee, elbow, reducer, coupling and all other fittingsof size 15 mm complete all specified and directed. |
| 87 | Supply and Fixing of brass Tee, elbow, reducer, coupling etc of size 20 mm complete all specified and directed. |
| 88 | S&F in repair vitreous china floor/wall hung WC with flushing cistern, UF seat cover, hinges, accessories set of size 375 x 650 x 800/370 x 645 x 810 mm fixed to wall/floor with P/S trap complete as per manufacture\"s instructions. Make - Jaquar Aria/Opal,Plumber,Marcetc all as specified and directed. |
| 89 | S&F for Vitreous china (Counter type)WHB White (C, size 495x395x150 mm with waste coupling waste pipe of 32mm dia all as specified and directed. |
| 90 | M&L For Granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete |
| 91 | S&F PVC connection 450mm long with brass nuts and PVC washer |
| 92 | S&F for half stall Vitreous China urinals, pedstalltype (Size 310x300x555 mm) white,completeincluding providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinalto plugs with and including 60 mm long brass screws, pointing around urinal back in cement, fixing automatic flushing cistern with brackets, flush pipe gratings and urinal for discharge pipe etc all as per directed. |
| 93 | S&F in repair 15 mm bore CP brass single leverCentral HoleBasin mixture fixed to GI pipe.complete all as sp and directed. |
| 94 | S&F bib taps 15 mm chromium plated fancy type, cast copper alloy screwed pressure,screwed both ends for iron pipe for unions and fixed |
| 95 | S&F for stop valves/angle volve, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed |
| 96 | S&F 75mm dia PVC floor trap with grating fixed in position complete |
| 97 | M&L for PVC (SWR) pipes 110mm dia laid in floor or in trenches, single socketed with rubber ring joints complete all as directed and as specified |
| 98 | M&L for PVC (SWR) pipes 110mm dia bends with rubber ring joints complete all as directed and as specified incl |
| 99 | &L for PVC (SWR) pipes 75 mm dia laid in floor or in trenches, single socketed with rubber ring joints complete all as directed and as specified |
| 100 | M&L for PVC (SWR) pipes 75mm dia bends with rubber ring joints complete all as directed and as specified incl |
| 101 | S&F in repair 5 mm thick bevelled edge mirror of selected quality mounted mounted on 6 mm thick glass and fixed to 50 mm long chroumium plated brass spacer complete all as specifed and directed. |
| 102 | Supply and fixing 500 Litre capacity Rotational moulded polyethylene water storage tanks triple layered (cylindrical vertical with closed top) ISI marked, hoisted & fixed in position & making necessary arrangements for fixing inlet, outlet & over flow pipe & provision of wash out pipe etc complete as specified in SSR Part-I. |
| 103 | S&F Ball valves, high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball, screwed for iron pipe 20mm bore (minimum weight 210 gms) complete all as specified and as directed. |
| 104 | S&F in repair health faucet for EWC CP hand hold with flexible pipe 1.5m longcomplete set all as specified. |
| 105 | S&F tubular towel rail, 20mm dia D type 60cm long between flanges of brass chromium plated |
| 106 | M&L preparation of newly plastered surfaces and applying two coat of oil emulsion distemper (OBD) over 2 mm wall care putty on wall,approved shade/tint all as specified & as directed |
| 107 | S&F 18 mm thick solid WPC board one side prelaminated decoratiove teak face and other side white and balancing including all theedges shall be covered with 2mm thick edge bounding tape as in kitchen shelf, shutters etc including chawkats and all fitting accessories etc including dismantling, complete all as specified and directed |
| 108 | S&F Magnet Ball catches with 8mm dia steel ball, and brass body and striking plate for cup board / cabinet shutters complete all as specified and directed |
| 109 | S&F 150mm long fancy stainles steel handle for cupboard & wardrobe shutter complete all as specified and as directed by Engr-in-charge |
| 110 | S&F continuous (piano) hinges, mild steel, bright finish or electro galvanized width of flaps 30mm (when open) fixed with CP steel screws. |
| 111 | Excavating in trenches not exc 1.5m wide and n exc 1.5 m depth, for laying of drain pipes etc &for manhole etc, not exc 10 Sqm on plan and n exc 1.5 m in depth and getting out in hard/dense soil. |
| 112 | S&F 150mm internal dia, PVC drain pipe grade ‘A’, laid in trenches and jointed with cement joints all as specified, |
| 113 | M&L concrete bed to drain pipes of 150 mm dia incl packing under and haunching against the sides of pipes with concrete, after they are laid in cement concrete 1:3:6 typer C2 and testing including necessary form work. |
| 114 | Returning, Filling in soil including spreading, leveling, watering and well ramming in players not exc 25cm |
| 115 | Removal of excavated surplus material n.exc 50m and deposited where directed at a level n exc 1.5m above the starting point |
| 116 | M & L for brick work with sub class ‘B’ old size bricks, straight or curved on plan exceeding 6m mean radius built in cm 1:6. including dismantling |
| 117 | Rendering 15 mm thick on brick work or concrete surface in cm 1:4 with water proofing compound (WPC to be measured & paid separately)and finishing the surface even and smooth with using. extra cement. |
| 118 | PCC 1:3:6 type C-2 (suing 40 mm graded stone aggregate in foundation of manholes all as directed. |
| 119 | PCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in coping, benching of manholesetc and including necessary formwork |
| 120 | M&L for RCC 1:2:4 type ‘B1’ (using 20mm graded stone aggregate) in precast manhole cover and cover slab for septic tanks and including necessary forms and moulds etc and set in cement mortar 1:6 and including demolition of old slab complete all as specified. |
| 121 | M&L steel deformed twisted bar of any dia, cut to length, bent to shape required, including cranking, hooking for ends and binding with and including mild steel wire (annealed ) not less than 0.9mm dia. |
| 122 | BOQ Item No. 122 TO 59 FOR JOB NO.LSA/DWP/46/SRW/25-26 S&F mild steel rolled/tubular sections as in main and cross beams, hip and jack rafters, purlins where connected to common rafters , fixed with angle cleats or other connecting plates etc. conforming to GradeFe 410W(Gde E-265 quality `B’ all as specified and directed. |
| 123 | M&L for brick work with Sub class \"B\" bricks straight or curved on plan exc 6m mean radius in CM 1:4 all as specified. |
| 124 | M&L preparation of old/new plaster surfaces with three coat of white wash on wall surfaces etc all as specified and directed. |
| 125 | M&L for preparation of Old/Newsteel and iron surfaces of any description over 10 cm in width or girth and applying two coats of synthetic enamelpaint of approved tint over a coat of zinc chrome primer complete all as specified. |
| 126 | Taking down carefully surface aluminium or copper point wiring (light, fan, socket, bell or power) including fixture and fittings such as switches, ceiling roses, regulators, sockets etc and making good disturbed surfaces even and smooth using CM 1:3 including white/colour wash to match the existing surface complete. |
| 127 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 1.5 sqmm and earth continuity conductor with 1.5 sqmm using colour code drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken modular GI metal boxes 1.0 mm thick and modular mounting cover plates with frame of approved colour for mounting modular switches, sockets etc as required for the following:- |
| 128 | One light point controlled by one switch. |
| 129 | One fan point controlled by one switch. |
| 130 | One socket outlet 6 A controlled by one switch on indepdendent board. |
| 131 | One socket outlet 6 A controlled by one switch on the same board with other switches. |
| 132 | M&L for point wiring with 1100 volts grade PVC insulated FRLS multistranded copper conductor cable 2.5 sqmm and earth continuity conductor 2.5 sqmm colour coded drawn into and including concealed rigid non metallic PVC conduit medium grade not less than 25 mm diaISI marked ivory colour with all conduit fittings / fixing accessories and sunken galvanized pressed steel terminal box of thickness not less than 1.0 mm and modular mounting cover plates with frame of approved colour for mounting modular switches, sockets etc as required for one 16 amp socket outlet point controlled by one switch on independent board. |
| 133 | S&FSwitch Modular 6A single pole, one way, 1 module complete . |
| 134 | S&FSwitch Modular 16A single pole, one way, 1 module complete . |
| 135 | S&F Socket, 6A - 2/3 pin combined 2 module complete . |
| 136 | S&FSocket 6A/16A - 2/3 pin combined 2 module complete . |
| 137 | S&FModular White cover plate with frame,8 module complete . |
| 138 | S&FModular White cover plate with frame,4 module complete . |
| 139 | S&FModular White cover plate with frame,3 module complete . |
| 140 | S&F Modular White cover plate with frame,2 module complete . |
| 141 | S&F Modular Metal flush box 8 module complete. |
| 142 | S&F Modular Metal flush box 4 module complete . |
| 143 | S&FModular Metal flush box 3 module complete. |
| 144 | S&F Modular Metal flush box 2 module complete. |
| 145 | S&F in renewal LED surface mounted batten 20 watt, powder coated die cast/ extruded aluminium body (Thickness ≥ 1.20 mm) or CRCA sheet body (Thickness ≥ 0.50 mm) and construction as per IS:10322 with driver (Replaceable) as per the requirement with driver efficiency >85%, System lumen efficacy 120 lm/Watt output, Operating voltage AC 140-270 Volt, 50 Hz, operating temp range -15 deg to 40 deg centigrade, internal surge protection of 2.5 KV with Short & Open circuit protection, THD < 10% , P. F.≥0.95, IP20, CRI >80, Flicker free, (flicker should be below 5%), life time (LED & electrical circuitary) of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <3, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard and trade mark certificate (TC). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc as required with Minimum 5 year OEM warranty. LM79 & LM80 Test report from NABL lab for all tests required for LED fixtures as BIS shall be submitted. Note:- Heat sink of aluminum housing such that LED junction temperature shall not rise above 90°C. |
| 146 | All as per above ser No 15 LEDtube lightfittings 10 Watt of two feet longenergy effcientetc including connecting up complete. |
| 147 | Supply and fix lamp holder, PVC / Polycarbonate type with back plate suitable for batten fitting including 12 Watt LED lamp B22 CDL complete |
| 148 | S&F in repair LED security light fixture 35 watt powder coated pressure die cast aluminum body with driver Input voltage: 140-270 Volt AC, 50 Hz, operating temp range -15 deg to 50 deg centigrade, internal surge protection of 5 KV L,N,E as per IEC 61000-4-5, Driver efficiency > 85%,THD < 10% as per IEC 61000-3-2 , P. F.≥0.95, IP- 66,IK-10, CRI >80, System lumen efficacy ≥105 <120 lm/Watt output, under voltage and over voltage protection, EMIEMC as per CISPR -15, lenses for beam angle as per IESNA type I/II/III as per the requirement, life time (LED & electrical circuitry) of minimum 50000 burning hours with 70% of initial Lumen maintained till life ends as per LM80 extrapolation IES TM-21-11 report, CCT 5700°K /6000°K/6500°K (As per ANSI Bin), SDCM (Standard Deviation Color Matching) <5, Maximum power consumption should not more than the specified rating and fixture shall be of relevant BIS standard complete in all respect including connections with suitable size FRLS, PVC insulated copper conductor cable and earthing etc. as required with Minimum 5 year OEM warranty. LM 79 & LM 80 Test report from NABL lab for all tests required for LED fixtures as per BIS shall be submitted. Note:- Heat sink of aluminum housing should be such that LED junction temperature shall not rise above 90°C. |
| 149 | Supply and fix ceiling rose, 3 terminal polycarbonate body complete. |
| 150 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300m. |
| 151 | Supply and fix4 way MCB DB with 100 Amps rated bus bar 240Volt, Double door type all as specified |
| 152 | Supply and fixing MCB SPN 32 Amp 240 V, repturing capacity 10 KA making connetion by using suitable copper lugs. |
| 153 | S & F , SP, AC, 240 volt, 10 KA, 6 to 32 Amp \"C\" series 202 marked incl making of connection by using suitable copper lugs. |
| 154 | Material and labour for earthing with galvanised mild steel earth plate electrode 60 cm x 60 cm x 6 mm thick buried vertically in ground (earth pit not less than 2.25 metre deep below ground level) with top edge of the plate not less than 1.5 metre below normal ground level steel earth plate connected with GI wire 04 mm dia by means oflug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15 mm bore light grade all as shown in elect plate No 3 on serial page No 497 of SSR part I - 2009 and connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150 mm thick around GI earth plate, GI pipemedium grade 20 mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover 40 mm thick in PCC 1:2:4 type B1 duly reinforced with MS Bars 6 mm dia at the rate of 75 mm centre to centre both way with 12 mm dia lifting handle and pit / chamber in PCC 1:3:6 type C1, Angle iron 40 mm x 40 mm x 3 mm frame for pit cover including testing on completion complete. |
| 155 | Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 2.0 core complete. |
| 156 | S&L or fixing DWC HDPE pipe alongwith all accessories like socket, bend, copplers etc ISI marked as per IS-16205 (Pt-24) including cutting/jointing laid in trenches (Excevation not included) wall, floor etc as reqd 50 mm outer dia and 38 mm inner dia (for cable protection) complete. |
| 157 | Cutting walls of any type, making holes for fixing of exhaust fan any size or sweep and making good surface with fine plastering, finishing and colouring with existing colour matching complete. |
| 158 | S&F in replacement of LED post top lantern 40 Watts 230 Volt AC Outdoor type with decorative post top for 360 degree indirect light IP 65 Protection with impect and corrosion resistant coplete with driver and lamp complete. |
| 159 | Material and labour for sub main wiring with 04 Sq mm nominal cross sectional area, two single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable with and including continuous earth wire of size 04 Sq mm nominal cross sectional area, single core, 1100 Volt grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable and connected to common earth and earth dolly with suitable copper lugs and drawing into and including rigid non-metallic PVC conduit of 25 mm dia, medium grade complete with and including all PVC conduit accessories concealed into wall by cutting of chases in wall and making good to the disturbed surfaces to match the existing including taking out the unserviceable sub main wiring complete. |
| 160 | Supply and fix4 way TPN DB with 415 Amps rated bus bar 240Volt, Double door type all as specified |
| 161 | Supply and fixing MCB TPN 40 To 63 Amps 240 V, repturing capacity 10 KA making connetion by using suitable copper lugs. |
| 162 | Supply, laying and testing cable XLPE insulated, screened PVC bedded galvanised steel strip or wire armoured electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 25 sqmm 4.0 core complete. |
