|
| 1 | Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and as directed. |
| 2 | Taking down chowkhat or frame with shutter without taking off shutters from the frame, size of shutter not exceeding 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each etc complete all as specified and as directed. |
| 4 | Taking down shutters of any description not exceeding 1 Sqm each etc complete all as specified and as directed. |
| 5 | Taking down shutters of any description exc 1 Sqm and not exc. 2 Sqm each etc complete all as specified and as directed. |
| 6 | S & F for4 mm thick of size 600x600mmHSPC (high pressure Steam Cured) pre-Painted self embossed, textured designer boardE-Board Classic to be fixed Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre. fixed in ceiling flat or Sloping etc including dismantling of old wall and ceiling board fibre, pulp insulation etc or insulation boards any thickness including cover fillets complete all as specified and as directed. |
| 7 | M&L for second class hardwood as in scantlings clean sawn timberfixed etc including dismanling of old from its position complete all as specified and as directed. |
| 8 | S&F anodised aluminium powder coatedsection as in aluminium frame for doors, windows, ventilators including shutters, with one or more rebates including joining cleat for fixing complete all as specified and as directed.Note:- Necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc are deemed to be included in quoted rates. |
| 9 | M & L for block boards, 18/19 mm thick, , grade 2 quality, e x t e r i o r grade, , commercial type fixed with screws to timber frame work , for cup board including lipping / beading as required including dismantling of old one from its position complete all as specified and directed. |
| 10 | S & F 18/19 mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work,for cup board with and including lipping / beading with 6mm thick teak wood as required including dismantling of old one from its position complete all as specified and directed. |
| 11 | S&F 30mm thick continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified and as directed. |
| 12 | M&L for external teak wood lipping 6 mm thick, fixed with nails on particle board 12 mm thick etc complete all as specified and as directed. |
| 13 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry over and including 15mm thick screed bed of CM (1:6) and pointed in white/coloured cement to match etc complete all as specified and as directed. |
| 14 | M&L for non skid ceramic colouredtiles 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqm set and jointed in neat cement slurry over and including 15mm thick screed bed of CM (1:6) and pointed in white/coloured cement to match etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and as directed. |
| 15 | M&L for non skid ceramic colouredtiles for skirting 7 to 8 mm thick exc 0.11 Sqm but n exc 0.18 Sqmand including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)complete all as specified and as directed. |
| 16 | M&L for Glazedceramic colouredtiles in vertical surface of size 350 X 250 X 7mm /450 X 350 X 7 mm thick,set and jointed in neat cement slurry and pointed in coloured.including 10 mm thick bedding layer in CM (1:4), set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)complete all as specified and as directed. |
| 17 | M&L for Coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished , area of each tiles not exc 0.36 sqmin floors etc and jointed neat in cement slurry and pointed in white or colour cement to match. including 15mm thick screed bed of CM (1:6) and pointed in white/coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) all as specified and as directed. |
| 18 | M&L for Coloured /light shade vitrified ceramic tiles 10mm thick (square/regtangular) polished ,area of each tiles not exc 0.36 sqmmatching with floor as in skirting etc and joineted neat in cement slurry and pointed in white or colour cement to match. including 10 mm thick bedding layer in CM (1:4) , set and jointed in neat cement slurry and pointed in white or coloured cement to match including dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing)all as directed. |
| 19 | M&L 75 mm thick cement concrete type C-2 (1:3:6) (40 mm graded coarse stone aggregate) as in plinth protection, using extra cement for finishing etc including demolition of old from its position complete all as specified and as directed. |
| 20 | M&L for Cement concrete type B-1 (1:2:4), as in levelling course (using 12.5mm graded coarse stone aggregate), 25mm thick complete all as specified. |
| 21 | M&L for brick work in cement mortar (1:4) using sub class \"B\" bricks straight or curved on plan exc 6.0 m mean radius etc including demolition of old brick work from its position built in cement mortar complete all as specified and as directed. |
| 22 | M&L for brick work with sub class \"B\" bricks straight or curved on plan in any radius in half brick thick walls built in cement mortar 1:4, demolition of old brick work from its position built in cement mortar complete all as specified and as directed. |
| 23 | Taking down cement plaster on walls built in cement mortaretc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed. |
| 24 | M&L for 15mm thick cement plastering in cement mortar 1:6 brick or concrete surfaces of wall finished fair and even complete all as specified and directed. |
| 25 | M&L for 15mm thick cement plastering in cement mortar 1:4 brick or concrete surfaces of wall finished fair and even with out using extra cement complete all as specified and directed. |
| 26 | S&F factory made 30 mm thick, flush shutters, solid core construction, with particle board core and plywood face panels complete all as specified and directed. |
| 27 | S&F for second class hardwood 35 mm thick plain, framed, panelled shutter (two panels) with lock rail and panel of 9mm thick B.W.P commercial ply or 12mm thick veneered particle board with commercial veneering on both faces; size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated etc complete all as specified and as directed. |
| 28 | S&F for second class hardwood glazed and skeleton door shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and as directed. |
| 29 | S&F for second class hardwood glazed and skeleton window and ventilator shutters, 30mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beeds for securing glass etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (b); supplied and fitted to chowkats etc complete all as specified and as directed. |
| 30 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framed rebated on the solid,rounded or chamfered, put together with glue pinned at joints etc complete all as specified and as directed. |
| 31 | S&F for Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying & fixing in opening etc complete all as specified and as directed. |
| 32 | S&F for Factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving a PVC sheert strip of 20mm width suck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bbottom rail; panelling of plain colour PVC sheet to be fitted in the M.S. frame wedded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site etc complete all as specified and as directed. |
| 33 | S&F Sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed. |
| 34 | Hacking out old broken glass of any thickness size or description from wooden frames or metal frames fixed with wooden beads/ putty and providing and fixing new ones etc complete all as specified and as directed. |
| 35 | Supply and fix sheet glass selected quality 4.0mm thick, any size, tinted of approved colour fixed with rubber beading complete all as specifed and directed. |
| 36 | S&Ffor galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples etc complete all as specified and as directed. |
| 37 | S&F in repairs Sheet glass 5.5 mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5sqm in each pane etc complete all as specified and as directed. |
| 38 | S&F Butt hinges, medium weight, cold rolled mild steel,75mm size etc complete all as specified and as directed. |
| 39 | S&F Butt hinges, medium weight, cold rolled mild steel, 100 mm size etc complete all as specified and as directed. |
| 40 | S&F Aluminium, anodised, barrel tower bolt 200mm longof extruded section and fixed etc complete all as specified and as directed. |
| 41 | S&F Aluminium, anodised, barrel tower bolt 150mm longof extruded section and fixed etc complete all as specified and as directed. |
| 42 | S&F for 300mm aluminium alloy anodised sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts fixed etc complete all as specified and as directed. |
| 43 | S&F Extruded aluminum alloy handles, fabricated type, anodised 100 mm size etc complete all as specified and as directed. |
| 44 | S&F Extruded aluminum alloy handles, fabricated type, anodised 150 mm size etc complete all as specified and as directed. |
| 45 | M&L for preparation of new plasteredsurfaces of walls and applying twocoat of oil bond distemper over a coat of primeretc complete all as specified and as directed. |
| 46 | S&F in repair floor door stopper overall length of cover plate 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor etc complete all as specified and as directed. |
| 47 | M&L for preparation of oldsurfaces of steel and iron work of any description over 10 cm width or girth not otherwise described andapplying one coat of synthetic enamel paint in any tint etc complete all as specified and as directed. |
| 48 | M&L for preparation of old painted wood and wood based surfaces of any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint in any tint all as specified and directed |
| 49 | M&L for two coats of synthetic enamel paints over a coats of red oxide primer including prepration of new steel surfaces of any description over 10 cm in width or girth not otherwise described |
| 50 | M&Lfor preparation of untreated new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint (1st grade quality) over a coat of pink primer complete all as specified and as directed. |
| 51 | M&L for Preparation of old decorated surfaces and appplying one coat of white wash on walls, cornices etc. complete all as specified and directed. |
| 52 | Complete removal of exisitng treatment on walls all as specified and as directed. |
| 53 | M & L for 2 mmthick Birla white putty/JK white wall care putty on walls etc complete all as specified and as directed. |
| 54 | M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying two coat of oilbound distemper on walls.all as specified and directed |
| 55 | M&L preparation of old surfaces of wallsapplying one coats of cement base paint complete all as specified and as directed. |
| 56 | M&L for Preparation of old decorated surfaces by washing, scrubbing down, and applying one coat of oilbound distemper on walls all as specified and directed |
| 57 | M & L for water proofing treatment of roofs using Dr fixit roof seal classic waterproofing coating that provide a seamless and though waterproofing barrier for old roofs as under :- Method of application:(1) Prepare the surface thoroughly by cleaning & washing (2) Check the hollow portion and fill it with cement sand mixed with Dr fixit U.R.P.(3) Apply one coat of Dr fixit prime seal ( diluted 2 part of prime seal with 1 part water ) (4) Apply two coat of Dr fixit roof seal classic at interval of 8 hours cure for the period of minimum 7 days . |
| 58 | M &L For Preparing the sunken floor, slab grouting as specified and appying cement plaster coat laid to slope average 15 mm thick in CM (1:3) finished even and fair and applying evenly then ,Applying evenly a tack coat of in dustrial bitumen 85/25 at the rate of 1.2 kg per sq.mthen APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application etc complete all as specified and as directed. |
| 59 | Preparation of new plasteredsurfaces of walls and applying three coat white wash completeall as specified and directed. |
| 60 | M&L for Preparation of new surfaces and applying twocoat of white wash on ceiling, cornices etc. complete all as specified and directed. |
| 61 | M&L preparation of new surfaces of walls & applying two coats cement base paint over a coat of primer complete all as specified and directed. |
| 62 | M & L for writing letter for figures (block, Roman, italic or indian) n exc 30 Nos CM high with thick synthetic paint with out bursh marks, if necessary repainted until the desired result is obtained etc complete all as specified and as directed. |
| 63 | S&F in repair 15mm bore long bodybib cock chromium plated fancy type, screwed down, screwed for iron pipe or for brass ferrule etc complete all as specified and as directed. |
| 64 | S&F in repair 15mm diapillar tap cast copper alloy chromium plated fancy type(ISI Marked) etc complete all as specified and as directed. |
| 65 | S&F in repairs WHB Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dia of pipe etc complete all as specified and as directed. |
| 66 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 15 mm bore GI tubing etc complete all as specified and as directed. |
| 67 | Taking upor down steel tubing and connections including cleaning for refixing with all fittings for 20 mm bore GI tubing etc complete all as specified and as directed. |
| 68 | S&F in repairs Brass chromium plated toilet paper holderall as specified and as directed Make : Cera Cat part F-5007109 or equivalent as per make oflist attached etc complete all as specified and as directed. |
| 69 | M & L for High density poly ethylene pipes Dia 15 mm(HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 70 | M & L for High density poly ethylene pipes Dia 20 mm(HDPE) of pressure rating 6 kgf/Sqcm fixed complete to walls, ceilings or in floors etc complete all as specified and as directed. |
| 71 | S&F GI pipe medium grade 15 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes etc complete all as specified and as directed. |
| 72 | S&F GI pipe medium grade 20 mm dia with all fitting laid in floor or fixed in walls including taking down old GI tubes etc complete all as specified and as directed. |
| 73 | S&F brass chromium plated angle cock 15mm bore with crutch or butterfly handle screwed to iron pipe, fixed in repair etc complete all as specified and as directed. |
| 74 | S&F in repair CP towel rail 600mm long with brackets, chromium plated 20mm dia etc complete all as specified and as directed. |
| 75 | S&F in repair brass CP shower rose 100mm size with swivel joint fixed etc complete all as specified and as directed. |
| 76 | S&F in repair PVC low level flushing cistern of 10 ltrs capacity incl flush pipe complete fixed etc complete all as specified and as directed. |
| 77 | M&L for vitreous china squatting pan, Orissa, pattern size 580 x 440 mm white with integral foot rests(excluding flushing cistern and flush pipe)including connection to trap and to flushing pipe, anti-syphonage pipe etc complete including making good to floor complete all as per specified and directed. |
| 78 | S&F in repairs wall mixer 3-in-1 systemfor mixing hot & cold water screwed down for iron pipe and fixed for 15 mm bore dia of pipe etc complete all as specified and as directed. |
| 79 | S&F in repairs Vitreous china wash down water closet pan, (pedestal pattern), white, with and including plastic water closet seat, white, closed pattern with flat bottom, andcover and mild steel chromium plated or aluminised hinging device etc complete all as specified and as directed. |
| 80 | M&L in repai Wall Mounted CabinetMirrorCabinet, PTMT, of size 450x350mm complete all as specified and as directed. |
| 81 | S&F mirror of size 450x600x5mm thick with aluminium frame and mounted on 6mm ply confirming to IS, with two Nos of hanging hooks fixed in repairs etc complete all as specified and as directed. |
| 82 | S&F in repair PVC connection pipe 15mm bore 450mm long etc complete all as specified and as directed. |
| 83 | S&F waste pipe 750 long for WHB or sink in repairs etc complete all as specified and as directed. |
| 84 | S & F Wash basins, Vitreous China (flat back or angle back type) of size 630mm x 450 mm, including cutting for and pinning in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe etc complete all as specified and as directed. |
| 85 | S & F in repair 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed. |
| 86 | S&F in repairs Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specifiedcomplete all as specified and directed. |
| 87 | S & F for sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long etc complete all as specified and as directed. |
| 88 | S&F plastic water closet seat cover, black closed pattern with flat bottom and cover and MS chromium plated or aluminium hanging device, fixed in repair,complete all as specified and directed. |
| 89 | M & Lcement concrete type D-2, (1:4:8), using 40mm graded stone aggregate as in fillings for sunken portionand mass concrete etc complete all as specified and as directed. |
| 90 | S&F in repairs 110mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls etc complete all as specified and as directed. |
| 91 | S&F in repairs 75mm dia PVC (SWR) pipes single/double socketed in any length with rubber ring joints, fixed to walls etc complete all as specified and as directed. |
| 92 | S&F(SWR) 110mm bore pipe junction single (single T) equal and unequal with access door etc complete all as specified and as directed. |
| 93 | S&F PVC (SWR) branch piece, double (double Y) equal or unequal 110mm bore etc complete all as specified and as directed. |
| 94 | S & F 110 mm dia PVC (SWR) vent cowl complete all specified and as directed. |
| 95 | S&F PVC (SWR) bends 110mm bore of any radius with access door etc complete all as specified and as directed. |
| 96 | S & F in repair stainless steel sink, 1mm thick for kitchen with draining board with plug and PVC waste pipe including bedding in cement mortar, fixing brackets overall size 915x460mm, bowl size 410x330x 160mm, asfixed in repairs complete all as specified and directed.(Make: Nirali (Kitchen Queen)/Dimond/Neelkanth/ Prayag/Blue Star). |
| 97 | Supply and fixing in repair stainless steel (conforming to AISI-304 grade) plate rack of overall size 750mm x 600mm x 254 mm or equivalent made of 1mm thick stainless steel sheetfixed on CP cantilever brackets, complete all as specified and as directed. Make : Jayna Cat No SBSD-05 or equivalent approved make. |
| 98 | M&L for 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms, laid over and including 20mm thick screed bed/bedding layer in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as \"specified and as directed. |
| 99 | S&F in repairsfor Draperly rod /Harrison rails of CP of 20mm dia with fixing brackets, stops, rollers and ringsetc complete all as specified and as directed. |
