|
| 1 | Demolition of Brick Work/ stone work / concrete block wall built in Cement Mortar including all quoins, arches, pillars, etc. of any descriptions, complete all as specified and as directed. |
| 2 | M&L for precast cement concrete block masonry, type C-1 (1:3:6) (20 mm graded aggregate) with solid blocks, exc 10 cm in width and setting in CM 1:4 complete all as specified and as directed. |
| 3 | Taking down cement or cement lime plaster on walls/ concrete/roof slab any description including racking out joints hacking for key, scrubbing down with water etc. and removing rubbish complete all as specified and directed. |
| 4 | M&L for rendering 10 mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and directed. |
| 5 | M&L for applying one coat of alkali resistant primer on plasteredsurfaces of wall over 3mm thick wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed. |
| 6 | Providing and applying 15 mm thick ready mix external sand faced cement plaster with neat cement rendering at all locations in two coats on masonry (except stone masonry) and concrete surfaces with ad including mixing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete all as specified & directed. |
| 7 | M&L for applying a coat of SmartCare Primero with dilution ratio of 1:1 with water maintain a coverage of 100 sq.ft/ltr cleaning off the dust, dirt etc. and filling cracks with smart crack filler mixed with cement in 1:3 on walls complete all as specified & directed. |
| 8 | M&L for preperation of new surface wall/ceilling by scrapping/ rubbing, applying two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane (Asian paint damp proof + ultima suprema, exterior anti fungal paint or equivalent), including making proper surface by applying ready mix preparatory wall care putty wherever required complete all as manufacturers instructions and as directed. Note:- The application of paint shall be done by the authorized applicator of the company and also the dealer/company shall appoint a person to inspect and validate the application of emulsion in stage wise manner. |
| 9 | M&L for preperation of old surface wall/ceilling by scrapping/ rubbing, applying two coat of advanced anti-algal weather proof 100% acrylic smooth emulsion with silicon additives, over a coat of fibre reinforced elastomeric liquid water proofing membrane (Asian paint damp proof + ultima suprema, exterior anti fungal paint or equivalent), including making proper surface by applying ready mix preparatory wall care putty wherever required complete all as manufacturers instructions and as directed. Note:- The application of paint shall be done by the authorized applicator of the company and also the dealer/company shall appoint a person to inspect and validate the application of emulsion in stage wise manner. |
| 10 | M&L for complete removal of existing treatment of wall and applying 3 mm thick wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed. |
| 11 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) n. exc. 1.50 Sqm each complete all as specified and directed. |
| 12 | Taking down Chowkats or frames with shutter (without taking off shutters from the frame) exc. 1.50 Sqm and n. exc. 4.00 Sqm each complete all as specified and directed. |
| 13 | S&F powder coated (any colour and thickness of coating not less than 50 micron) aluminium door frame and shutters single/double leaf glazed/ pre-laminated particle board 12 mm thick exterior grade or partly glazed and partly per-laminated board in shutters including aluminium powder coated beading, rubber packing and fixed with suitable size of thrust bolts in wall by drilling and comprising of following:-(a) Door frame made of section 101.6 x 44.45 x 1.90 mm (Cat No. 20146) (b) Vertical section of shutter size – 85 x 44.45 x 2 mm (Cat 19560)(c) Top rail, style shutter 95.25 x 44.45 x 2 mm (Cat 19505) (d) Bottom rail/ middle rail 150 x 44.20 x 2.2 mm (Cat 19517)(g) Aluminium powder coated handle 205 mm long (Cat 29426) 2 Nos. in each shutter(h) Tinted/Plain glass 5 mm thick(j) Pre-laminated particle board 12 mm thick exterior grade(k) Six lever brass mortice lock(l) Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty.(m) Aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg.NOTE :- (i) Cat No. mentioned above are of Jindal Make. Contractor can provide any other make as mentioned in List of makes attached with tender documents.(ii) In case of non avalibility of any section next higher size section matching with other sections will be used. |
| 14 | S&F aluminium powder coated (thickness or powder coating not less than 50 micron) frame and shutters for doors/ windows/ ventilators, sliding/ fixed/ openable type complete with necessary fittings such as two concealedlock for each window, roller, hinges etc. wheel etc. including necessary arrangements to receive 4 mm thick glass or wire mesh with aluminium channel beading & stainless steelscrews complete all as specified and directed.Note : (a) The weight of rubber gasket beading will not be measured with the weight of aluminium shutters, glass will be measuerd and paid separately.(b)The rate quoted by the contractor shall also include necessary wheels for sliding shutters and hinges for side hung/top hung shutter as required at sight and concealed locks for windows. (c)The colour of powder coating shall be as approved by GE. |
| 15 | M&L for 4 mm thick sheet glass ordinary quality and fixed with oil putty or rubber beading, aluminium strip where required fixed in aluminium windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 16 | M&L for figured glass(frosted), 3 mm thick, pin head type and fixed rubber beading, aluminium strips in squares not exceeding 0.50 Sqm in each pane fixed in aluminium windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 17 | M&L for fixing in repair figured glass(frosted), 4 mm thick, pin head type and fixed rubber beading, aluminium strips in squares not exceeding 0.50 Sqm in each pane fixed in aluminium windows/ doors/ partition/ ventilators complete all as specified and directed.Note :- Aluminium glazing strip/ metal strip paid sepetately under respective item. |
| 18 | S&F Deco-104 (10 mm thick), aluminium powder coated grill and fixed to the existing window frame with and incl \"C/F/L\" channel (weight not less than 0.136 g/Rm) alround grill, CP brass/ stainless steel screw @ 200 mm centre to centre including cutting the grill to proper opening size for fixing and operation of handles wherever required and fixing approved anodised aluminium standard section (C/F/H) around the opening all complete all as specified and directed. |
| 19 | S&F in repair aluminium (extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 Kg and fixed complete all as specified and directed. |
| 20 | S&F in repair curtain rod fancy type, made out of 25mm dia MS conduit pipe duly PVC sleeved, fancy type plastic finial, decorative type, fixed to ends of rod and mild steel prepainted/PVC coated brackets suitable to hold the drapery rod and fixed to wall with the help of 2 Nos 50 mm long steel screws and rawl plug, colour and pattern as approved by GE complete all as specified and directed. |
| 21 | S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 22 | S&F Solid PVC frame (single rebated) size 60mmx30mm made out of solid PVC foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing.NOTE: Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life. |
| 23 | M&L for providing Factory made soild PVC profiled panel door shutter 28mm thick with integral skin as frame & 3 mm thick high pressure compact laminate on both side of approved colour as infill, with \"C\" type Gl or 40 x 20 x 19 mm of MS pipe as stiffner & supplying & fixing in frame at site complete all as directed. |
| 24 | S&F aluminium anodised barrel tower bolt of extruded section 150 mm long (ISI marked) and fixed complete all as specified and directed. |
| 25 | S&F 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed allas specified and directed. |
| 26 | S&F 100 mm sizemild steel butt hinges, ISI marked, medium weight, cold rolled and fixed with screws/welded to frame complete all as specified and directed. |
| 27 | S&F aluminium handles, cast type, anodised, ISI marked 150 mm size completeall as specified and directed. |
| 28 | M&L for forming jambs etc to opening, including cutting, toothing proper bonding into old work, also facing, jointing and pointing to match the existing work, new work built in CM 1:6 complete all as specified and directed. |
| 29 | S&F in repair floor door stopper of aluminium alloy body and tongue, anodized with rubber washer at bottom fixed with screw to body and fixed to door shutter, over all length of cover plate shall be 150 mm complete all as specified and directed. |
| 30 | Dismantling floor, hearth or wall tiling including cement mortar bedding (including backing), removing tiles and rubbish off the premises complete all as specified and directed. |
| 31 | M&L for mat finished double charged vitrified ceramic tiles 9-10 mm thick (square/rectangular) polished, area of each tiles exc. 0.42 Sqm but not exc. 1 Sqm as in floor etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles laid over & including rendering 15 mm thick in cement mortar 1:6 finished rough to fix tiles complete all as specified and directed. |
| 32 | M&L for glazed ceramic coloured tiles or ceramic designer tiles of size 450 x 350 x 7 mm thick in vertical surface set and jointed in neat cement slurry and pointed in white or coloured cement to match the existing surface with & including rendering 10 mm thick in cement mortar 1:3 finished rough to fix tiles complete all as specified and directed. |
| 33 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (square or rectangular) area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floor set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 34 | Demolition of stone slabs and tiles of any description and thickness as in floor, apron etc. laid, bedded and pointed in any mortar complete all as specified and directed. |
| 35 | M&L for granite stone 20 mm thick (of any type) glazed(table rubbed and polished) fixed as in steps, jambs, pillars, window cills, cooking plateform and the like set in cement mortar 1:4 and pointed with white cement (1:2) using marble dust with admixture of pigment to match laid over and including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:4 for laying floor finishes complete all as specified and directed. |
| 36 | M&L for machine cut cudappah stone slab 20 to 25 mm thick fixed in position laid, jointed and pointed with grey cement slurry mixed with pigment to match the shade of slab, grinding and polishing with & including screed bed or bedding layer of mortar 15 mm thick in cement mortar 1:6 for laying floor finishes complete all as specified and directed. |
| 37 | M&L for rounding to edges of stone slabs one edge, such as in steps, cooking plateform and other similar situations complete all as speciifed and directed. |
| 38 | Dismantling wall and ceiling boards (fiber, pulp, insulation etc) or insulation boards/ slabs/ blankets, any thickness including cover fillets complete all as specified and directed. |
| 39 | S&F POP false ceiling work interior quality 12 mm thick moisture proof board of Hlux silicate in any size incl fixing to curve or moulding surface over 2nd class soft wood fillets or metal frame all accessory with gypsum moulding 75 mm grith for POP ceiling of approved design as required at site with MR grid complete all as specified and directed. |
| 40 | M&L for suspended false ceiling with E board classic ceiling board 4 mm thick including and fixing of frame work made of special GI section with zinc coating as per IS 277 and consisting of angle cleats of size 25 mm wide 1.6 mm thick with flag fixing to the ceiling with dash fastner 12.50 mm x 40 mm long 6 mm dia bar fixed with nut and bolts in GI channel 45 x 14 x 0.90 mm runner for fixing E board of size 600 x 600 mm including fixing of E board with ceiling section and paremeter of channel 0.50 mm thick, 27 mm high having flange of 20 mm to 30 mm long etc. and frame work to be hold with GI wire 4 mm dia to existing roof slab, truss, purlin etc. complete all as specified and directed. |
| 41 | S&F in reapir 18/19 mm thick prelaminated particle board, interior grade, type-II,prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws as in shutters of Cup board complete with wooden beads of size 18 mm x 6 mm all around edges and its varnishing/ french polishing including door magnet, staple and hucks etc. complete all as specified and directed. |
| 42 | S&F continuous (piano) hinges, mild steel, bright finish or electrogalvanised with width of flap (when open) 30 mm completeall as specified and directed. |
| 43 | S&F 75 mm long hasp & stapleAluminium anodised, safety type, with mild steel hinge pin including bolt to hinge plate and fixed with screwscompleteall as directed. |
| 44 | S&F aluminium handles, cast type, anodised, ISI marked 100 mm size completeall as specified and directed. |
| 45 | S&F in repair Glass shelf with CP railing (22\" x 6\") complete all as directedMake:- Nixo-Cat part no- ES01A/Hilife/Cera/Prayag |
| 46 | S&F in repair, Glass corner shelf with CP railing(12\" x 12\") complete all as directedMake-Nixo-Cat no-ES03A/Hilife/Cera/Prayag |
| 47 | Demolition of reinforced cement concrete(reinforcement cut as required to facilitate demolition)as in roof, floors (other than ground floors), beams, stair cases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 48 | S&F Rolled sections as in framing for cladding, glazing and the like fixed with angle cleats and connecting plates, etc. conforming to Fe-410W Gde- E-250 quality A complete all as specified and directed. |
| 49 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 50 | M&L for RCC 1:2:4 type B-1(using 20 mm graded stone aggregate) as in slab, beams, cantilevers, bressummers, lintels over 1.5 m span complete all as specified and directed. |
| 51 | Use and waste formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. for rough finished surfaces of concrete complete all as specified and directed. |
| 52 | M&L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 53 | M&L for mild steel TMT bars 5 mm dia and over in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete all as specified and directed. |
| 54 | M&L for applying 3 mm thick wall care putty and applying two coat of oil bound distemper including preparation of new surfaces complete all as specified and directed. |
| 55 | Dismantling water tank capacity exc. 500 ltr but n.exc. 1000 ltr complete all as specified and directed. |
| 56 | S&F in position rotational moulded polyethylene water storage tanks 1000 lts capacity (cylinderical verticalwith closed top) hoisted and fixed in position all as specified in SSR Part I complete all as directed |
| 57 | S&F ball valve 25 mm bore high presure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe (minimum weight 455 grams)complete all as specified and directed. |
| 58 | Taking up or down existing GI tubing and connections, including making good the disturbed surface for 20 mm dia pipes complete all as specified and directed. |
| 59 | Supply, fixing, laying & testing CPVC pipes 20 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings laid in trenches complete all as specified and directed. |
| 60 | Taking up or down existing GI tubing and connections, including making good the disturbed surface for 25 mm dia pipes complete all as specified and directed. |
| 61 | Supply, fixing, laying & testing CPVC pipes 25 mm outer dia SDR 11 including Plain CPVC SDR 11 fittings laid in trenches complete all as specified and directed. |
| 62 | S&F in repair 20 mm dia gun metal globe or gate valve with iron wheel head screwed both ends and for iron pipe & fixed complete all as specified and directed. |
| 63 | S&F in repair angle/stop valve 15 mm nominal bore cast copper alloy, fancy type, chromium plated, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipes or for unions and fixed complete all as specified and directed. Make - Jaquar Cat part No. FLR 5053N or equivalent in Hindware/ Plumber/Cera |
| 64 | S&F in repair 15mm bore pillar taps, high neck fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make - Jaquar Cat part No. FLR 5015 or equivalent in Hindware/ Plumber/Cera |
| 65 | S&F in repair CP wall mixer, for mixing hot and cold water fancy type cast copperalloy, with capstan heads, chromium plated, screwed down for 15 mm bore pipe, high pressure with long screwed shanks and fly-nuts, screwed for iron pipe complete all as specified and directed.Make - Jaquar Cat part No. FLR 5217N or equivalent in Hindware/ Plumber/ Cera |
| 66 | S&F in repair 15 mm nominal bore Bib taps, long body fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.Make - Jaquar Cat part No. FLR 5047N or equivalent in Hindware/ Plumber/ Cera |
| 67 | S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two PTMT nuts & rubber washers complete all as specified and directed. |
| 68 | Supply and fixing in repair designer single piece WC with soft close seat cover, hinges, dual flush cistern fittings and fixing accessories size 370 x 690 x 680 mm complete all as specified and directed.Make : Jaquar Cat part No CNS-WHT-851S300SPP or equivalent in Hindware/ Cera/Jonson. |
| 69 | Supply and fixing in repair counter top wash basin of size 530 x 420 x 140 mm with 32 mm dia stainless steel waste coupling, bottle trap 32 mm, fixed over granite slab counter including making hole in slab complete all as specified and directed.Make : Jaquar Cat part No JDS-WHT-25907N of Jaquar or equivalent in Hindware/ Cera/Jonson |
| 70 | S&F in repair central hole basin mixer, fancy type, cast copper alloy chromium plated, with round spout with popup waste system, including plugging and fixed, suitable for 15mm bore pipe complete all as specified and directed. Make : Jaquar Cat part No. FLR 5005NB or equivalent in Hindware/ Plumber/ Cera |
| 71 | S&F in repair Toilet Roll holder with stainless steel flap and paper roll complete all as specified and directed.Make : Jaquar Cat part No ACN-1153S or equivalent in hindware/ Plumber/ Cera |
| 72 | S&F in repair PVC mirror cabinet of size 600 x 450 mm with hinged door covered with mirror, with brush holder, pouch holder, shelves etc. complete all as directed.Make PRAYAG/ Commander/Polytuff |
| 73 | S&F in repair two-in-one Bib Taps 15 mm Bore, Cast Copper Alloy with crutch or butterfly handle screwed down, screwed for Iron Pipe or for Brass Ferrule complete all as specified and as directed.Make - Jaquar Cat part No. FLR 5041N or equivalent in Hindware/ Plumber/ Cera |
| 74 | S&F in repair 600 mm x 450 mm x 5.5 mm thick bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and aluminium angle alround fixed to wooden plugs with chromium plated brass screws & washers complete all as specified and directed. |
| 75 | S&F deco edge less mirror 5 mm thick of selected quality glass, mounted on wall with 4 to 6 Nos with stainless steel CP plugs/ connector/ spacers/ screws etc. complete all as specified and directed. |
| 76 | S&F in repair 10 ltr PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets complete all as specified and directed |
| 77 | S&F in repair 20 mm outer dia stainless steel towel rail, 60 cm long between flanges fixed with rawl plug completeall as specified and directed.Make - Jaquar Cat part No. ACN 1111SM or equivalent in Hindware/ Plumber/ Cera |
| 78 | S&F in repair soap dish, vitreous china coloured, approximate size 160 x 160 x 90 mm fixed to rawl plugs with chromium plated brass screws & washers complete all as specified and directed. |
| 79 | S&F 75 mm dia PVC (SWR) floor trap, with stainless steel grating including jointing to waste pipe with solvent cement and fixed in cement concrete 1:2:4 type B1(using 20 mm graded stone aggregate) complete all as specified and directed. |
| 80 | S&F in repair PVC (SWR) pipe 110 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and fixed to walls complete all as specified and directed. |
| 81 | S&F in repair PVC (SWR) pipe 75 mm bore, single socketed, in any length with rubber ring joints and jointed with approved adhesive and laid in trenches or in floors complete all as specified and directed. |
| 82 | S&F PVC (SWR) bend with access door 110 mm dia, any radius fixed to pipe complete all as required and as directed. |
| 83 | S&F PVC (SWR) bend with access door 75 mm dia, any radius fixed to pipe complete all as required and as directed. |
| 84 | S&F in repair vitreous china bowl urinal flat back excluding flushing cistern, flush pipe and waste pipe but including grating and union for discharge pipe complete all as specified and directed.Make : Jaquar Cat part No URS-WHT-13261 or equivalent in Hindware/ Cera/Jonson. |
| 85 | Removing building materials by truck or tractor with using of if necessary JCB machine and trolly load min 5.00 Cum each load including loading, unloading and stacking at the destination and depositing out side defence land complete all as specified and directed. |
| 86 | Dismantling wrought iron or mild steel work of any description complete all as specified and directed. |
| 87 | S&F mild steel framed work as in grills, grating, tank staging etc. with end of bars shouldered and/or riveted, or forged into spikes: frame guard bars: barred iron doors: ladders: frame balusters: walk ways: railing: frame work of water tanks and similar works confirming to Fe- 290.Gde-E-165 complete all as specified and directed . |
| 88 | S&F rolled mild steel in framed work as in doors or gates of angle or other section with gusset plates, rails, braces,etc., complete, drilled for fixing of steel sheeting or other covering doors, etc., to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed. |
| 89 | M&L for preparation of new or previously untreated steel surfaces exceeding 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer all as specified and directed. |
| 90 | S&F in repair chromium plated brass shower roses 125 mm dia with or without swival joints, including fixing to 15 mm dia pipe or union all as specified. |
| 91 | Supply and fixing of hand shower (health faucet) with 8 mm dia, 1 m long flexible tube and wall hook complete all as specified and directed.Make : Jaquar, cat part No ALD-573 or equivalent in Hindware/ Plumber/ Cera |
| 92 | Taking down copper/ aluminium point wiring (light, fan, socket or power) complete including fixture and fittings such as switches, ceiling rose, pendants, regulators, sockets, light fittings etc. removing materials to store for keeping in safe custody or for taking credit and making good disturbed surfaces of walls, floors etc. to match the existing complete all as specified and directed.NOTE: Credit for this items shall be made as per conditions separately. |
| 93 | M&L for point wiring complete for one light/ fan/ exhaust fan point controlled by one, one way 5/6 Amp switch with PVC (FRLS) insulated unsheathed multistranded copper conductor of size 1.50 sqmm nominal cross sectional area single core drawn in and including minimum 20 mm dia \"medium grade\" PVC conduit ISI marked concealed in wall and fittings and modular metal flush box, modular white cover plate with frame, blanking plate and making good to the disturbed surfaces to match the existing complete all as specified and directed including 1.50 sqmm nominal cross sectional area PVC(FRLS) insulated unsheathed multistranded copper conductor green as earth wire connected to earth dolly with all accessories including making good disturbed surface to match the existing surface complete all as specified and directed.Note- (i) Rates include the cost of blanking plate, modular plate, modular boxes and covers of suitable modules as required at site.(ii) Modular box, plate and cover shall be of same make as of switch//socket/regulator. |
| 94 | All as per item No. 93 above but for one 5 pin 5/6 Amp socket outlet point on same board |
| 95 | All as per item No. 93above but for one 5 pin 5/6 Amp socket outlet point on an independent board. |
| 96 | All as per Item No 93above but for one 6 pin 15/16 amps socket outlet point on an independent board with FRLS cables of size 4 Sqmm and green colour earth cable of size 4 Sqmm. |
| 97 | S&F modular type switch one way 6 Amps, 230 Volt, 1 Module complete all as specified and directed. |
| 98 | S&F modular type switch one way 16 Amps, 230 Volt, 1 Module complete all as specified and directed. |
| 99 | S&F modular type socket one way 6 Amps, 2/3 pin, 230 Volt, 2 Module complete all as specified and directed. |
| 100 | S&F modular type socket one way 6/16 Amps, 2/3 pin, 230 Volt, 2 Module complete all as specified and directed. |
| 101 | S&F ceiling rose, two or three terminal, surface bakelite 65 x 50 mm complete all as specified and directed. |
| 102 | S&F modular typefan regulator, electronic step type, 120 W, 2 Module complete all as specified and directed. |
| 103 | S&F in repair brushless direct current (BLDC) ceiling fan 1400 mm sweep with service value 6.00 BEE, 5 star rating complete with blades and other accessories, single phase, 230 V including 1 m long down rod and making connection with sheathed 3 core cable of size 0.75 Sqmm flexible copper conductor wire complete all as specified and directed. NOTE:- Old fan will be deposited to MES store yard.Make : Havells cat No- FHCNF5SWHT56/Orient model Hector 500/ Bajaj Model- ENERGOS 28(SKU Code 251100EE) |
| 104 | S&F in replacement existing U/S light fitting with LED tube light fitting surface and wall mounted batten Aluminium body with 22/20 watts LED having minimum 100 lumens/watts and with integrated electronic driver complete all as specified and directed. Make: Philips cat No-BN021CLED22S PSU CW GR/ Crompton cat no-CCS-103-20-65-SL-DP-NWH/ Halonix HLB-03-20-CW-AL-SQ. |
| 105 | S&F in replacement LED luminaire 600 mm x 600 mm, 35/36 watt, 6500 K, 220 V AC recessed type fully diffused, CCT, luminous efficiency of not less that 120 lm/watt designed for metric false ceiling type or alongwith frame suitable for Armstrong/ US Gypsum or similar mounting system with concealed or exposed ‘T’ section, Glare free light alongwith electronic driver complete with all accessories prewired and connecting with three core twisted flexible copper conductor cable complete all as specified and directed.Make:- Havells VENUSNEO2X2PLR36WLED865G2/ Phillps cat part No-RC380BLED36S-6500 G5 L60W60PSUODSG /Bajaj Cat part BZRSQL 43 L LED GX PRO WH |
| 106 | S&F wall mounted fan 400 mm sweep (air circulating), single phase, 230 V complete all as specified and directed. Make : Bajaj cat no-Esteem400mm(SKU code 250542)/Havells cat no-Accelero HS grey(FHWACHSWGR16) /Orient 44 Crystal white |
| 107 | S&F in replacement sheet metal enclosure MCB distribution board, double door with IP-43 protection single pole and neutral 240 volts, 8 way,including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. |
| 108 | S&F in replacement sheet metal enclosure MCCB distribution board, double door with IP-43 protection TPN, 415 Volts, 8 way, Vertical type, including suitable size copper bus bar and metal door, epoxy powder coated, factory made complete without MCB and with enclosure blank plates for unused way fixed flush in wall including chases wall for fixing DB and making good distributed wall surfaces complete all as specified and directed. |
| 109 | S&F in replacement sheet metal enclosures, single pole and neutral with a two pin and earth plug and socket, plug top and one single pole MCB 20 Amps, C series 240 V complete all as specified and directed. |
| 110 | S&F in replacementMCB single pole 240 volts, \"C\" curve of rating from 16 to 32 amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 111 | S&F in replacementMCB single pole 240 volts, \"C\" curve of rating 63 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 112 | S&F in replacementMCB SPN 240 volts, \"C\" curve of rating 40-63 Amps, with rupturing capacity 10 KA, including providing thimble for out going cables complete all as specified and directed. |
| 113 | S&F in replacement MCCB 160 Amps 415 volts, 4 pole, 36 KA breakingcapacitywith thermal magnetic setting suitable for VTPN including providing suitable size aluminium lugs, spreaders complete all as specified and directed. |
| 114 | Supply & install in repair storage type water heater (Geyser) capacity 25 Ltrs five star rating copper inner tank GMV type prefixing and grouting work for mounting nuts, bolts and washer etc. in wall and reconnecting all inlet/ outlet/ vent pipes, electrical/ earthing connections and carrying out testing for proper functioning complete all as specified and directed.NOTE:- Old Geyser will be deposited to MES store yard.Make:- Havells MONZA DX 25L/ Bajaj CALENTA (M)/ Racold OMNIS DG 25 L |
| 115 | S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 2.5 Sqmm nominal cross sectional area and one run of 2.5 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 25 mm PVC conduit and fittings fixed on wall/ roof/ floors/ ceiling etc. including cutting chases to walls for laying conduit wherever required and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire, one run of earth wire and one run of PVC conduit |
| 116 | S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 4 Sqmm nominal cross sectional area and one run of 4 sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 32 mm PVC conduit and fittings fixed on wall/ roof/ floors/ ceiling etc. including cutting chases to walls for laying conduit wherever required and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire, one run of earth wire and one run of PVC conduit |
| 117 | S&F in repair sub main wiring with two single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 10 Sqmm nominal cross sectional area and one run of 10 Sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 32 mm PVC conduit and fittings fixed on wall/ roof/ floors/ ceiling etc. including cutting chases to walls for laying conduit wherever required and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.NOTE:- One unit length shall measured as two run of main wire, one run of earth wire and one run of PVC conduit |
| 118 | S&F in repair sub main wiring (three phase) with four single core PVC insulated (FRLS) unsheathed multistranded copper conductor of size 10 Sqmm nominal cross sectional area and one run of 10sqmm nominal cross sectional area PVC insulated (FRLS) unsheathed multistranded copper conductor green colour as continuous earth wire drawn in and including not less than 40 mm PVC casing caping and fittings fixed on wall/ roof/ floors/ ceiling etc. including cutting chases to walls for laying conduit and making good the disturbed wall surfaces to match with existing specification complete all as specified and directed.NOTE:- One unit length shall measured as four run of main wire, one run of earth wire and one run of PVC Conduit |
| 119 | S&F in replacement flexible 600 mm long steel hose connection pipe with brass coupling nut and PVC washers on both ends complete for cold/hot water inlet/outlet lines for geyser complete all as directed. |
| 120 | M&L taking out old earthing and providing new earthing complete with galvanised steel plate electrode 600 mm x 600mm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mts deep below ground level with top edge of the plate not less than 1.50 Mtrs below ground level connected to glavanised iron strip 25 x 4 mm by means of bolts, nuts check nuts and washers of galvanised iron or steelconnected to earthing test point all as specified incl GI tubing medium grade and necessary fitting for protection of GI wire incl laying of charcoal dust and common salt in alternate layer, PCC Pit (1:3:6) type C-1 using 20 mm graded stone aggregate, RCC cover 40mm thick (1:2:4) type B-0 using 12.5 mm graded stone aggregate reinforced with 6 mm dia round bar @ 75 mm C/C both ways with MS handle 8 mm dia, plastering 15 mm thick CM (1:6) externally upto 150mm below ground level, GI funnel with 20mm dia medium grade GI pipe for watering and wire mesh incl. excavation and earth work and disposal of surplus soil complete all as specified and shown on electrical plate No 3 of SSR Part (2009) and connected to earth test point incl testing complete all as specified an directed.Note:- The unit rate includes the cost of GI pipe medium grade for protection of earth wire and earth strip upto 7.5 M. |
| 121 | Supply and fixing in replacement ofexisting old un-serviceable Earth continuity conductor of size 25 x 4 mm GI strip fixed to wall and batton or recess or chases or burried in ground or drawn in conduit/pipe or fixed to poles or any other situation for loop earthing etc. complete all as specified and directed. |
| 122 | Taking down of Split type AC (Indoor & out door with mounting bracket & voltage stabilizer) of any capacity from existing place, keeping in safe custody/ deposit to MES store till completion of Building maintanance and Reinstalling the same or other location complete including gas filling etc., testing & commisioningall as specified and directed.Note : New spares required for replacing (mounting bracket, insulation for copper and copper tubing) shall be measured and paid seperately. |
| 123 | Supply and fix in repair PCB (circuit board) complete suitable for 1.5/2.0 ton capacitysplit ACunit all as directed. Make: LG, Voltas, Daikin |
| 124 | S&F in replacement exhaust fan (Metal body) of 300 mm sweep, AC single phase 230/240 volts, 1400 RPM, heavy duty complete including making electric connection with PVC insulated three core 1.5 Sqmm copper cable from ceiling rose to exhaust fan, making hole in wall of suitable size, grouting anchor bolts/fastners and making good to disturbed surfaces to match the existing complete all as specified and directed.NOTE:- Old exhaust fan will be deposited to MES store yard.Make : Orient Ind heavy duty 1400RPM/ Havells Turbo force 1P(FHEHDSPDB120) /Bajaj Supreme plus Ind fan |
