|
| 1 | Earth work in excavation in foundations trenches etc. in all kinds of soil where Pick-Jumper work is not involved and not exceeding 2.0 metres depth including dressing of bottom and sides of trenches, stacking the excavated soil clear from the edge of excavation and subsequent filling around masonry in 15 cm, layers with compaction including disposal of all surplus soil as directed within lead of 30 metres. |
| 2 | Laying Cement concrete 1:4:8 with 40 mm gauge stone aggregate. mixing by mechanical means using concrete mixer volumetric type |
| 3 | First class burnt brick work laid in cement sand mortar 1:4 in foundation and plinth |
| 4 | 1st class brick work in cement sand mortar 1:4 in Super structure |
| 5 | Cement concrete 1:2:4 mixing by mechanical means using concrete mixer volumetric type with stone ballast 20mm gauge With stone ballast or shingle |
| 6 | Scraping Cement plaster |
| 7 | Cement rendering on plaster 1mm thick |
| 8 | Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt /Glosy/ Highly Gloss finish / Highlighter / emboss conforming to IS :15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x 300 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1cement: 4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. |
| 9 | Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. 600x600mm. |
| 10 | Distempering with Acrylic washable oil bound distemper (of approved manufacture) two or more coats over one priming coat to give an even shade. |
| 11 | Painting two or more coats excluding priming coat with synthetic enamel paint in all shades on wood work, metallic or plastered, concrete surface to give an even shade. |
| 12 | Wire Gauge 22 gauge 12x12 mesh of (140 G gauge) at site of work . |
| 13 | Repainting letters and figures of black synthetic enamel paint to give an even shade |
| 14 | Providing and fixing in position Chinaware European type water closet P trap or S trap of approved make (to the approval of the Engineer-in-charge) consisting of 10 ltr. PVC flushing cistern ISI marked, PVC short bend 32 mm dia including cost of seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge. |
| 15 | Providing and fixing jet spray with 2\"-6\" long PVC pipe.With C.P. Brass nut |
| 16 | Providing & fixing in position vitreous Chinware white Indian make flat back or angular lipped front small urinals size 265x315x440mm approved make (to the approval of the Engineer-in-charge) with C.P. brass tube connection 300 mm long complete in all respect. |
| 17 | Providing & Fixing in position stop cock Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.PTMT 15mm Angle valve |
| 18 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge )complete in all respect. C.P. brass Bib cock long nose/ long body foam flow without flange |
| 19 | Providing & Fixing in postion 15 mm i/d bib cock of approved make (to the approval of Engineer-in-charge) complete in all respect(PTMT Pillar tap). |
| 20 | Providing and fixing in position SS Grating with frame of approved make (to the approval of engineer in charge) complete in all. |
| 21 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring fan point (Without fan box) |
| 22 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring light point |
| 23 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 6Amp. wall socket point |
| 24 | Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. mm, 1100volts grade to be laid in heavy gauge welded conduit pipe 20mm/ 25mm dia (1.6mm thick) ISI Marked, recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having Step type electronic fan regulators (two module) 100watts, bell push, 6Amp. 2/3 universal socket (shuttered), 16/20Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame Plate etc., PVC connector (For Fan Box and Call Bell), PVC Bush, Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), CI Circular junction Boxes (Four way 1½\" deep for walls and 3\" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq. mm, 1100volts grade (For 6Amp. wall socket & plug control point) and other petty material etc. including the cost of above material, cutting and filling up of chases (with finishing the surface):- Wiring 16/20Amp. power plug control point |
| 25 | Providing and fixing 110 mm dia . U.P.V.C Rain water pipe (working pressure 4 kg / cm²) (ring fitted type-A) as per IS:13592 including jointing during masonry complete as per specifications and to the entire satisfaction of Engineer-in charge. |
| 26 | Providing and fixing in position vitreous chinaware white lavatory suites of approved make (to the approval of Engineer-in-charge) consisting of C.P. brass waste 32mm dia with one C.P. brass pillar tap including Rack Bolt Screw Pair 115mm long complete in all respect Size 550 mm x 400 mm x 815 mm |
| 27 | Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes as per as per IS - 14735 including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining.110mm o/d (VENT COWL) |
| 28 | Supply and erection of air conditioner supply terminal point on surface on wall etc., complete with PVC boxes (Plastic on surface boxes) required for suitable number of modules (Modular accessories) for having 25Amp. combined/ universal Socket (shuttered) and modular motor starter 25Amp. (2 Module), covered with Frame Plate etc., & including the cost of above material and other petty material with necessary connections etc.:- Wiring AC supply terminal point having 1No. 25Amp. universal Socket (shuttered) erected at AC height and 1No. Motor starter 25Amp. erected at switchboard height. E |
| 29 | Providing & Fixing in position plastic moulded frame mirror Size 550mmx400mm with 4mm thick hard board backing of required shape fixed in position with rawl plugs, C.P. brass screws and washers complete in all respect |
| 30 | Providing and fixing in position storage type automatic electric water heater pressure type thermostatically controlled, single phase wall mounted of approved make (to the approval of Engineer-in-charge) with thermostats, inner container of stainless steel, Inner glass lining with B-Rating minimum 3 stars complete with 1 Mtr. three core flexible cord with plug, non return valve and pressure release valve complete including fixing and testing complete in all respect Vertical type, 25 litre capacity water heater. |
| 31 | Supplying & fixing of M.S Clamp of size 150mm X 12mm made out of MS Flat 1.52m long, suitable to fit Housing pipe including the cost Nut & Bolts of Suitable size complete in all respect. |
| 32 | Water proofing treatment of Roof Slab with High performance cementitious two component product, consisting of a powder component and an acrylic polymer using two coats ( Dr Fixit Roofseal flex - Packaging Size: 12 .5 kg (7.5 kg powder + 5 kg polymer) / equivalent water proofing Solution ). The slurry thus formed by mixing the two, is to be applied on new roofs to forms a seamless, highly elastic, non-toxic waterproofing layer on the roof with a life expectancy of 7 years. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. |
| 33 | Terracing consisting of tiles 22.86x11.43x3.83cm laid over 25 mm mud plaster 7.5 cm mud filling on another layer of 25mm mud plaster including two coats of bitumen laid hot at 1.65 Kg. /Sqm top of R.C.C. slab including grouting with cement sand mortar 1:4 and top surface to be left clean after wire brushing. |
| 34 | Providing & Fixing in position stop cock Angle valve of approved make (to the approval of Engineer-in-charge ) complete in all respect.C.P.brass 15mm Angle valve without flange. |
| 35 | Providing, fixing and jointing Brass Ball valves screwed with SS/BRASS ball & spindle & Teflon seats, on G.I. Pipe lines including all carriages complete. 40mm i/d Brass Ball valves |
| 36 | Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick,grade-304 (18/8) with waste coupling complete in all respect Rectangular Sink with Deluxe Border Single Bowl Overall Size 555 mm x 475mm x 200 mm. |
| 37 | Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer - in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and base support for tank. Triple layer Tanks. |
| 38 | Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position Double Rebate (60mm x 150mm). |
| 39 | Hollock wood doors shutter windows shutter including hinges, screws, chocks, cheats, stops cords etc. complete fixed in position. panelled glazed or glazed and panelled.35mm thick |
| 40 | Teak wood wire gauge shutters without spring (Single Leaf) 35mm thick (single leaf) |
| 41 | Constructing soak pit 1.20x1.20x1.6 m deep, 230mm thick 1:5 brick work honey comb with bricks of Ist Class filled with brickbats including S.W. drain pipe 100 mm Diametre and 1.20 m long complete as per standard design. |
| 42 | Cold twisted deformed (Ribbed/ TOR Steel) Bars (Fe 500 grade as per IS 1786-2008), for R.C.C works, where not including in the complete rate of RCC including biding & bending and placing in position complete. |
| 43 | Reinforced cement concrete M-20 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centering and shuttering in superstructure. |
| 44 | Supply and erection of 40 watt LED decorative post top for 360 degree indirect light with IP65 protection, glare free, energy saving with high power LEDs as light source. Make Compton cat no. LPTO-40CDL (Maple) and equivallent make: Havells, Philips. Complete in all respect as approved and desired by the engineer incharge. |
| 45 | Providing and fixing partition for different type of urinals.Vitreous white Chinaware Partition Large partition size 75 x 16.5 x36.5 cm |
| 46 | Providing & fixing in position 15 mm i/d C.P brass wall mixer of approved make (to the approval of Engineer-in-charge ) complete inC.P. brass wall mixer without telephonic shower all respect. |
| 47 | Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineerin-charge) complete in all respect. CP Brass rain Fall Shower without arm 6\" square. |
| 48 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect C.P. Brass Pillar Cock foam flow |
| 49 | Providing and fixing in position premium range C.P. Brass Fittings and accessories of approved make (to the approval of Engineer-in-charge ) complete in all respect C.P. brass Bib cock with Wall flange |
| 50 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.Size 450mm x 450mm inside with RCC 455mm x 455mm cover and frame light duty double seal. |
| 51 | Construction of brick masonry inspection chambers size as given below upto 0.60 metre average depth in 1:5 cement sand mortar, C.C.1:4:8 ( 150mm thick) in foundation, cement concrete 1:2:4 benching 12.50mm thick cement plaster 1:2 with a floating coat of 1mm thick of neat cement, R.C.C. 1:2:4 slabs 100mm thick cement concrete topping 50mm thick with 455mm x 455mm, 455mm x 610mm inside R.C.C. inspection chamber cover and frame (Weight as per I.S.I specifications) painted with 3 coats of black bitumastic paint conforming to I.S.I complete as per standard design.450mm x 600mm inside with 455mm x 10mm cover and frame light duty double seal. |
| 52 | Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:-MCB Single Pole 40amp. (10kA, Curve-C) |
| 53 | Nayasa Plastic Buckets Natural HDPE 20 liter Litres as per satisfaction and Engineer incharge |
| 54 | Cello Coloured HDPE Round Cylinder Domestic Bathroom Mug red 751-1000 ml as per satisfaction and Engineer incharge |
| 55 | Unbranded Executive Table of Three layer prelaminated particle board(Wood Product) of grade II type II of IS 12823/Latest 1500 millimeter 750 millimeter 725 millimeter as per satisfaction and Engineer incharge. |
| 56 | Unbranded 5 Seater Sofa with centre Table & all Fabric Cover as per satisfaction and Engineer incharge |
| 57 | DURIAN Wooden Double Bed Storage Box Opening from Side 2000 1830 75 as per satisfaction and Engineer incharge |
| 58 | MPG Plywood 6 Seater Restaurant Table(MPG Wooden Dining Table with 6 cushion chair) as per satisfaction and Engineer incharge |
| 59 | Aqsa handloom Handloom Wool Blankets size in cm 230 X 152 as per satisfaction and Engineer incharge |
| 60 | Non Branded White Double Bed Sheets as per satisfaction and Engineer incharge |
| 61 | VANDCO Cotton Pillow 33 cm x 56 cm as per satisfaction and Engineer incharge |
| 62 | Raymond Home 150 X 75 cm Cotton Towel as per satisfaction and Engineer incharge |
| 63 | DINEWELL Melamine Printed Dinner Set as per satisfaction and Engineer incharge |
| 64 | Surya 22 Watt Retrofit as per satisfaction and Engineer incharge |
| 65 | prestige Square Single Element Induction Heater as per satisfaction and Engineer incharge |
| 66 | DDecor Cotton Plain Door Curtains as per satisfaction and Engineer incharge as per satisfaction and Engineer incharge |
| 67 | Voltas Split Air Conditioner Including Green AC 3501 = 5200(VOLTAS SPLIT INV 1.5T 3 S, 184V)as per satisfaction and Engineer incharge |
| 68 | BAJAJ 2400 Watt Liquid filled heater as per satisfaction and Engineer incharge |
| 69 | LUMINOUS Rating 900 VA Yes (suitable battery bank provided) (OPTIMUS 2300+ 2KVA/ 24V WITH BATTERY) as per satisfaction and Engineer incharge |
| 70 | LUMINOUS Inverter Battery Trolley for Tall Tubular as per satisfaction and Engineer incharge |
| 71 | LG Total Volume for Direct Cool NA Total Volume for Frost-free 261-300 2 star as per satisfaction and Engineer incharge |
| 72 | PLUGA SUBMERSIBLE PUMPSET 1.5HP as per satisfaction and Engineer incharge |
| 73 | SUBMERSIBLE CONTROLLER 1.5 HP STAR MODEL (BENTEX) as per satisfaction and Engineer incharge |
| 74 | Cable (Size/Cost) 2.50mm2 as per satisfaction and Engineer incharge |
| 75 | Adaptor set 1.25\" top+bottom as per satisfaction and Engineer incharge |
| 76 | Kent Reverse Osmosis Water Treatment System 15 LPH as per satisfaction and Engineer incharge |
| 77 | Hawkins 5 Liter Domestic Pressure Cooker as per satisfaction and Engineer incharge |
| 78 | prestige Domestic Fry Pan as per satisfaction and Engineer incharge |
| 79 | Milton HDPE Domestic Casserole of Capacity 1.5 Liter as per satisfaction and Engineer incharge |
| 80 | Unbranded KITCHEN STORAGE Vertical thali / Dish drying rack of 40 mm square pipe made of 16 SWG sheet as per satisfaction and Engineer incharge |
| 81 | Synthetic Broom with Strips of Polymer 30 as per satisfaction and Engineer incharge |
| 82 | GADRI BROTHERS Squeegee/Washer/Wiper/Mopper 501-600 base Stainless Steel handle as per satisfaction and Engineer incharge |
| 83 | VENAD CHEMICALS--VENAD CHEMICALS Disinfectant liquid 5000 ml as per satisfaction and Engineer incharge |
| 84 | BLUE STAR Drinking Water Cooler 40 litres / hour 80 litres as per satisfaction and Engineer incharge |
| 85 | Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects. 20MM. |
| 86 | Providing and laying, jointing, fixing and testing ISI Marked uPVC Pipe Lines as per ISI 4985-2000, including specials such as tees, bends, sockets, elbow etc., cutting, testing (including cost of specials) in the ground complete in all respects. 32mm |
| 87 | Providing & fixing 32mm thick factory made Internal solid door shutter consisting of solid core particle board of 24mm thickness, lipped with 15mm (5mm x 3) thick x 32mm width on one stiles & top rails & 10mm (5mm x 2) thick x 32mm width on the other stiles & Bottom rails. The panel laminated with 4mm thick termite proof, water proof & fire resistant PVC sheet both side using rubber adhesive on flush door & solvent Cement adhesive on the PVC lipping etc. complete as per manufacturer \"specification, conforming to test criteria specified in IS:4020-1998, Drawings and to the entire satisfaction of engineer-in charge. |
| 88 | Dismantling glazed tiles (to be carefully removed). (REST HOUSE BATHROOM Walls) |
| 89 | Providing and laying 80 mm thick factory made cement concrete interlocking Paving blocks of M40 grade manufactured by block making machine equipped with steel mould clamped to a strong vibratory table with hydraulic pressure for compaction of concrete as per IRC SP 63 -2014 and of approved size and design / shape laid in Ordinary Grey Colour and pattern over and including 40 mm thick compacted bed of coarse sand, filling the joints with fine sand etc, all complete as per directions of Engineer -in charge. (Also not to used over footpaths).(IN FRONT OF REST HOUSE) |
| 90 | 1.2 meter high G.I. barbed wire fencing with1.8 meter angle iron posts 40x40x6mm placed every 3 meters centre to centre 0.6 meter below ground level, every 15th post, end post, corner post suitably strutted and provided with 9 horizontal lines and two diagonals interwoven with horizontal wires fixed with GI staples, turn buckles etc. including foundation concrete 1:2:4 of size 0.30x0.30x0.75m for each post complete as per technical clause 808 of MORT&H specifications. |
| 91 | Boring with casing pipe for tube well in all soils except ordinary hard rocks requiring blasting including removing the casing pipe after the tube well is lowered & tested , equipment as required such as hand boring machine and its accessory, transportation to site and vice versa etc. complete in all respect.Boring with 200 MM id Housing Pipe. |
| 92 | Supplying, assembling, lowering and fixing in vertical position in bore well,unplasticized PVC medium well casing (CM) pipe of required dia, conforming to IS: 12818-2010, including required hire and labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer – incharge. 150 mm nominal size dia. |
| 93 | Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (RMS) pipes with ribs, conforming to IS:12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per direction of Engineer-in- charge. 150 mm nominal size dia. |
| 94 | Development and Stabilizing of the tubewell with air compressor of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in-charge.(a) Capacity of Air compressor 300 cfm at 250 PSI |
| 95 | Development and Stabilizing of the tubewell with submersible pump of required capacity as directed by the engineer-in- charge including cost of tools, appliances & consumable to the satisfaction of Engineer-in- charge. |
| 96 | Coloured Granite stone tiles 15mm to 20mm thick in skirting, risers of steps, dado walls and pillars laid in 12.5mm thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with neat cement slurry mixed with pigment to match the shade of stone, including rubbing and polishing including labour for fixing dowel pins and cramps. |
| 97 | Supplying and fixing glass panes with glazing clips and special metal sash putty of approved make |
| 98 | Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them)25 mm thick |
| 99 | Grassing of grounds with doob grass including uprooting rank vegetation and weeds by digging the area to a depth of 15 cm, removing all weeds and other growth with roots by forking repeatedly, breaking clods, mixing fertilizer, rough dressing and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts, planting grass roots in rows 10 cm apart in both directions, watering, weeding and maintenance till turf is formed. |
| 100 | UPVC COLUMN PIPE 15Kgf/cm2- 1.25 (1 pcs = 140 Ft.)\" as per satisfaction and Engineer incharge |
| 101 | Any Other Item Please Enable Macros to View BoQ information |
