|
| 1 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. For thickness of tiles 10 mm to 25 mm. D.S.R No-15.23.1 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. D.S.R No-15.56 |
| 3 | 15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 ( 1 cement 4 coarse sand). D.S.R No-13.5.1 |
| 4 | Providing and fixing Chlorinate Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer-in-charge Internal work-Exposed on wall. 25 mm nominal outer dia Pipes (DSR No-18.7.3) |
| 5 | Providing and fixing Clorinate Polyvinyl Chlorode (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c. fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer-in-charge Concealed work including cutting chases and making good the etc. 20 mm nominal outer dia Pipes DSR No- 18.8.2 |
| 6 | Providing and fixing of CPVC gate valve of 25mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 7 | Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge 110 mm dia. |
| 8 | Providing and fixing PVC pipes (6kg/sqcm) for sewer line including all fitting including trenching refilling & testing of joints complete as per direction of Engineer in charge, 90 mm dia. |
| 9 | Providing and fixing of PVC OFF Set of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 10 | Providing and fixing of PVC Cross Tee of 110x110x110 mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 11 | Providing and fixing of Nahani Trap Tee of 110mm dia nominal size of approved quality as per directed by Engineer-in-Charge. |
| 12 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work up to plinth level. 1:2:4 (1 cement 2 coarse sand (zone-III) 4 graded stone aggregate 20 mm nominal size). DSR No- 4.1.3 |
| 13 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zonei) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.(D.S.R-4.17) |
| 14 | Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in all colours shades except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 ( 1 cement 4 coarse sand) Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc. complete. (D.S.R No- 11.38) |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness tobe specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. (D.S.R-8.31) |
| 16 | Providing and fixing white vitreous china Single Piece water closet Cera make (CADRE 665 x 370 x 750 mm) with manually controlled device conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required, ( W.C. pan with ISI marked white solid plastic seat and lid ). |
| 17 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls a nd flo ors wherever White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests. (D.S.R-17.1.1) |
| 18 | Providing and fixing of white glazed earthen ware Wash Hand Basin with pedestal CERA MAKE with C.P jali, C.P angle valve, pvc waste pipe, C.P basin mixture, PVC connection 15mm dia 400mm long including supply of all materials labour T&P etc. required for proper completion of the work. (WHB Model :Cornet Size, 630x450mm, Cat No- S2040104). |
| 19 | Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge. (a) 15 mm nominal dia (D.S.R- 17.22.B) |
| 20 | Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15 mm nominal bore. D.S.R- 18.53.1) |
| 21 | Providing and fixing C.P. Brass Two way Bib cock with wall flange L &K or Equivalent make including supply of all material, labour T&P etc. complete. |
| 22 | Providing and fixing C.P. OVER HEAD shower with arm heavy quality L&K 0668) with 15mm inlet:100 mm diameter. |
| 23 | Supply and fixing C.P. Health Faucet with 8mm Dia 1.00 mtr. Long Flexible tube & wall hook L&K Make including supply of all material, labour T&P etc. complete. |
| 24 | Providing and fixing CP Towel Rod OF L&K Make 600x20mm together with pair of CP brass brackets to fit the towel rail complete |
| 25 | Providing and fixing CP Towel ring L & K or equivelent fittings arrangement of approved quality. |
| 26 | Providing and fixing of glass shelf 22\" L&K make with C.P. Guard standard size and bracket including supply of all material labour T&P required for proper completion of the work. |
| 27 | Providing and fixing of glass corner, CERA or Equivalent Make, including supply of all material labour T&P required for proper completion of the work. |
| 28 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15 mm nominal bore. (D.S.R- 18.51.1 ) |
| 29 | Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S. triangular plate to Eureopean type W.C. of quality and make as approved by Engineer - in - charge.(D.S.R- 17.16.A) |
| 30 | Providing and fixing C.P. Soap Dish l&k make including supply of all material , labour T&P etc. complete. |
| 31 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.(D.S.R-17.31) |
| 32 | Distempering with 1st quality acrylic distemper(ready mixed ) having VOC (Volatile organic compound) content less than 50 gram/litre, of approved manufacturer , including applying additional coats wherever required to achieve even shade and colour. old work (one or more coats) .DSR-13.81 |
| 33 | Painting with synthetic enamel paint of approved brand and manufacturer to give an even shade :one or more coats on old work (DSR-13.99.1) |
| 34 | Providing and fixing 18 mm thick gang saw cut mirror polished, premoulded and prepolished machine cut for kitchen platforms, vanity counters. Window sills, facias and simular locations of required size, approved shade coulur and texture laid over : 20 mm thick base cement mortar 1:4 ( 1 cement 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy louch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.granite stone slab ofcolour black,cherry /ruby red. area of slab over 0.50 sqm. (D.A.R No- 8.2.2.2) |
| 35 | Providing and Fixing of cup board with mica laminated 18mm HDMR board out side with one side decorative lamination. depth of cupord is 30 cm back side of cup board made by 12mm thick HDMR board including cost of all accessories such as handle, hinges, lock etc complete work with labour as per direction by E/I. |
| 36 | Providing and fixing of kitchen shelves/cabinet with basket, shutter is made by mica laminated 18mm HDHMR board and back side of box is made by 12mmHDHMR board. Length and width of cabinet is 50cm and height of cabinet is 65cm including cost of all accessories such as handle, hinges, lock, channel, basket, catcher etc complete work with labour as per direction by E/I. |
| 37 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws DSR 9.21.1 |
| 38 | Supply and fixing of steel kitchen sink 610X510X200 mm without drain board,with C.P.jali, P.V.C. waste pipe,bracket,including supply of all material, labour, T&P etc. for proper completion of work.(D.S.R-17.10.2) |
| 39 | Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. DSR-1.1.18 Please Enable Macros to View BoQ information |
