|
| 1 | Improvement of Higher Secondary School old Hostel Building,Improvement of Higher Secondary School Hostel Building,Improvement of Higher Secondary (Class Room & Science Lab) Building,Improvement of Higher Secondary (Main Building) at Singarapettai Range. |
| 2 | Improvement of Higher Secondary School old Hostel Building at Nellivasal in Singarapettai Range. |
| 3 | Paving the floor with best approved quality fine polished shahabad stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20 |
| 4 | Supply and fixing of Rain Water Pipe 75 mm PVC Pipe including cost and conveyance of all labour Charges |
| 5 | Providing Soak Pit Arrangements |
| 6 | Name board |
| 7 | Improvement of Higher Secondary School Hostel Building at Nellivasal in Singarapettai Range. |
| 8 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus |
| 9 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 10 | Brick work using country bricks of size 83/4\"x41/4\"x23/4\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 11 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 12 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Chipping of concrete and roughening the surface including cost of all labour charges etc., |
| 13 | Finishing the top of roof with one course of machine pressed tiles of size 23x23x2 cm in CM 1:3 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete |
| 14 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Chipping Wall Floor Finishned Daddoing walls including cost of all labour charges etc., |
| 15 | Dismantling, clearing away and carefully stacking materials useful for re-use for Doors and Windows including cost of all labour charges etc., |
| 16 | Supply and delivery of Steel Door and Windows including cost and conveyance of all labour charges etc., |
| 17 | Doors |
| 18 | Windows |
| 19 | TOILET |
| 20 | Doors |
| 21 | Paving the floor with Kota stone slab of size 600 x 600 of 18/20 mm (Un-polished)in all floor laid in cement mortor 1:3 including cost and conveyance of all labour charges etc., |
| 22 | Paving the floor with best quality Vertified Tiles of Size 600 x 600 x 8 mm of approved colour shade and quality laid in cement mortor 1:3 including cost and conveyance of all labour charges etc., |
| 23 | Dadooing of walls with colour glazed tiles of size300x200x6 mm of best quality including cost and conveyance of all materials to site and all labour charges etc complete. |
| 24 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 25 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer |
| 26 | Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358 |
| 27 | Painting New iron work with two coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 28 | Re Painting old iron work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 29 | Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitablecolour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD 36) |
| 30 | Plug point |
| 31 | Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with Continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD 25) |
| 32 | PVC light Point |
| 33 | Supply and fixing of fancy glass shade and 11W Tube light with Choke including cost of all labour charges etc., |
| 34 | Tube Light |
| 35 | Supplying and Fixing of Rain water pipe 75 mm pvc pipe including cost and conveyance and all labour charges etc. |
| 36 | Supply and fixing of Indian Water Closet Including cost and conveyance of all labour charges etc., |
| 37 | Supply and fixing of PVC Doors Including cost and conveyance of all labour charges etc., |
| 38 | Name board |
| 39 | Improvement of Higher Secondary School (Class Room & Science Lab) Building at Nellivasal in Singarapettai Range. |
| 40 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Chipping of concrete and roughening the surface including cost of all labour charges etc., |
| 41 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus |
| 42 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 43 | Brick work using country bricks of size 83/4\"x41/4\"x23/4\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 44 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 45 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer |
| 46 | Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358 |
| 47 | Re Painting old iron work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 48 | Painting two coats with approved Black Board Oxide for old Black Board including cost and conveyance of all labour charges |
| 49 | Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitablecolour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD 36) |
| 50 | Plug point |
| 51 | Supply and fixing of 1200mm sweep AC ceiling fan complete with stepped electronic 300W regulator with the existing down rod on the existing clamps (SD 112) |
| 52 | Ceiling Fan |
| 53 | Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with Continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD 25) |
| 54 | PVC light Point |
| 55 | Supply and fixing of fancy glass shade and 11W Tube light with Choke including cost of all labour charges etc., |
| 56 | Tube Light |
| 57 | Supplying and Fixing of Rain water pipe 75 mm pvc pipe including cost and conveyance and all labour charges etc. |
| 58 | Provision for Bala Painting arrangements etc., |
| 59 | Repairs for Doors and Windows including cost and all labour charges etc., |
| 60 | Doors |
| 61 | Windows |
| 62 | Name board |
| 63 | Improvement of Higher Secondary School (Class Room & Science Lab) Building at Nellivasal in Singarapettai Range. |
| 64 | Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus |
| 65 | Cement Concrete 1:4:8 (One Cement, Four M.Sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification |
| 66 | Brick work using country bricks of size 83/4\"x41/4\"x23/4\" in cement mortar 1:5 (One cement and five M.Sand) including curing neat finishing, etc., complete complying with standard specifiction. |
| 67 | Plastering with Cement Mortar 1:5 (One cement and Five M.Sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 68 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Wall Pressed Tiles & Weathering Course including cost and conveyance of all labour charges etc., |
| 69 | Damp Proof course with cement mortor 1:4 to 12 mm thick mixed with best approved quality water proofing including curing etc. complete complying with standard specification and as directed by the departmental officers. |
| 70 | Finishing the top of roof with one course of machine pressed tiles of size 23x23x2 cm in CM 1:3 12 mm thick including cost and conveyance of all materials to site and all labour charges etc complete |
| 71 | Dismantling, clearing away and carefully stacking materials useful for re-use for any thickness of Chipping Wall Floor Finishned Daddoing walls including cost of all labour charges etc., |
| 72 | Supply and delivery of MS Grill including cost and conveyance of all labour charges etc., |
| 73 | Grill |
| 74 | Paving the floor with pre-polished concrete anti-skid step tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone M.Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 75 | Distempering the old walls and ceiling one coat with best oil bound distemper of approved quality including preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, neat finishing, cost of brushes etc., complete complying with standard specification and as directed by the Departmental Officer |
| 76 | Re Painting the walls with Two coats with first class quality Plastic Emulsion paint of approved colour over a priming coat including thorough scraping, clean removal of dirt. The rate includes cost of brushes, sand paper, plaster of parries, putty wherever required and neat finishing etc., complete complying with standard specification and as directed by the Departmental Officer (the colour and quality should be got approved by the Executive Engineer before use) S I No 358 |
| 77 | Re Painting old iron work with one coat of best synthetic enamel paint of approved quality, colour including ordinary scrapping and preparation of surfaces (the colour and quality should be got approved by the Executive Engineer before use) the rate includes cost of brushes, high scaffolding charges, finishing neatly etc., complete complying with standard specification and as directed by the Departmental Officer. |
| 78 | Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking Wall socket with 5A flush type switch with painting of suitablecolour with continuous earth wire connection of 14 SWG TC wire for open PVC plug point (SD 36) |
| 79 | Plug point |
| 80 | Wiring with 2X2.50 sq.m PVC unshenthed SC alu. Cable with 650V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with T.W switch box with pointing of suitable colour with Continuous earth wire connection of 14 SWG TC wire for concealed PVC light point (SD 25) |
| 81 | PVC light Point |
| 82 | Supply and fixing of fancy glass shade and 11W Tube light with Choke including cost of all labour charges etc., |
| 83 | Tube Light |
| 84 | Providing Paver Block Main Building arrangements |
| 85 | Supplying and filling of Conveyaed earth with a lead of 1 Km basement filling including cost of all labour charegs |
| 86 | Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B |
| 87 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for 10 cum. |
| 88 | Supplying And Erection Of Steel Centering For Sides And Soffits Inclduing Cost And Conveyance Of All Charges |
| 89 | Cement concrete 1:2:4 mix using 20mm ISS metal including cost andconveyance of all materials to site and all labour charges for mixing,laying and curing etc complete for bed blocks for 10 cum |
| 90 | Providing and Laying of Interlocking Concrete (Surface Textured) Block Pavements having thickness 60mm and compacted over a thin bedding M.Sand layer of 25 mm thickness and joints shall be filled by fine M.Sand of specified grading as per table 1500.6 of Specification of Rural roads-2014 and Technical specification clause 1504. |
| 91 | Name board |
| 92 | GST Amount for providing service to Government contract works for the above construction works. { GST amount is the Total GST amount for total overall quoted amount above this row in column \"BB\" for all works in this package} Please Enable Macros to View BoQ information |
