|
| 1 | Preparation of old decorated surfaces of wall and applying one coat of white wash on walls complete all as specified and directed. |
| 2 | Discription all as per ser item No 1.00 above but on ceiling. |
| 3 | Preparation of old decoratedplastered surfaces or un-plastered surfaces of wall and applying onecoat ofoil emulsiondistemper complete all as specified and directed . |
| 4 | M&L for complete removalof existing treatment on old decorated surface of wall and applying two coat of oil emulsion distemper white/coloured over one coat of birla wall carebased putty (where it is required) all as specified and directed.Note:- Putty shall be measured and paid seperately under Srl Item No.5) |
| 5 | M&L one coat of 1.50mm thick wall care putty on walls/ceiling etc complete all as specified and directed |
| 6 | M&L Two coats of exterior emulsion paint ( Apex Ultima weather coat) with primer white or tintedon old/New surfaces of wallsincluding prepration of old/New surfaces and washing floors, cleaning glass, joinery,electrical fittings, wiring etc,of drops and splashes and applying two coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tintd ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over and including a coat of putty and incl necessary formworkcomplete all as specified and directed. |
| 7 | Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified. |
| 8 | Discription all as per ser Item No 7.00 above but on steel surfaces complete all as specified and directed. |
| 9 | M&L preparing of old painted surfaces of wood & wood based surfaceof any description not otherwise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed |
| 10 | M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed |
| 11 | Dismantling of Plain or corrugated steel sheeting , any gauge, thickness, including Nainital or similar pattern roof coverings etc. complete all as specified and directed. |
| 12 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugatedsteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, as in roof covering / claddingto wall, fixed with self tapping screwscomplete all as specified and directed. |
| 13 | S&F Pre-painted galvalume aluminium zinc coating GI based plainsteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa, as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed |
| 14 | S&F in repairs Fibre glass reinforced transulated corrugated sheeting2 mm thick with two corrugations side lap fixed with coach screw and washers in roofs walls,gates etc ,cloured approved. |
| 15 | Dismantling of timber scantling as fillets, rails, posts, rafters, purlins, any section & any description complete all as specified and as directed. |
| 16 | S&F Steel work as in tubular trusses, purlins,Safety grillsetc including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240etc complete all as specified and as directed. |
| 17 | Excavating in post holes (Or similar) each n exc 0.5 Cum getting out returning fillin in and ramming earth or broken rubble mixed with earth around, in layers n exc 25 cm watering and removing surplus soil to a distance n.exc 50 m and making good. |
| 18 | M&L Cement concrete Type C2 1:3:6 (using 40mm graded stone aggregrate) in foundations, filling and mass concretecomplete all as specified and directed. |
| 19 | Taking downcement or cement lime plaster of any description including racking out joints, hacking for keys , scrubbing down with water etc, complete all as specified and directed. |
| 20 | M&L for Rendering 15mm thick on fair faces of concrete/brick interior surfaces in cement mortar 1:6 finished fair and even without using extracement complete all as specified and directed. |
| 21 | M&L for Rendering 15mm thick on fair faces of brick work or concrete exterior surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound wherever requiredcomplete all as specified and directed. |
| 22 | M&L for Rendering 5mm thick on fair faces of brick work or concrete surfaces of ceiling, chajja in CM 1:3 surface finished even and smooth without using extra cement complete all as specified and directed. |
| 23 | M&L for preparation of new surfaces of plastered walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of white wall putty complete all as specified and directed. |
| 24 | M&L for preparing new/oldsurfaces of walls and applying two coat of cement based paint complete all as specified and as directed. (Note : Rate shall be included for necessary scaffolding and safety measures where required at site) |
| 25 | Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc.complete all as specified and directed. |
| 26 | M & L brick work with fly ash brickstraight or curved on plan exceeding 6 metres mean radius built in cement mortar 1:4 .complete all as specified and directed. |
| 27 | M & L brickwork with fly ashbricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all asspecified and diretced. |
| 28 | Mild steel TMT 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia, or securing with clipscomplete all as specified and directed. |
| 29 | M & L for reinforced cement concrete type B-1, 1:2:4 (using 20 mm graded granite stone aggregate) in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like. |
| 30 | Use and waste of fair finished flat form work to soffits of suspended slabs such as roof slabs, floor slabs, cooking platform and similar worknot exc. 200 mm thickcomplete all as specified and directed. |
| 31 | Demolition of cement concrete (unreinforced) in ground floors (below or above ground level ) not exceeding 15 cm thickness and including removing demolised PCC from site and depositing where required complete all as specified and directed. |
| 32 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises |
| 33 | M & L for coloured joint free non skid ceramic tiles 7-8 mm thick (square/rectangular), area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floors etc. set and and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer of cement mortar (1:6) finished even and rough to receive the top layercomplete all as specified and directed. |
| 34 | Description all as per ser item No. 33.00 above here-in- after but vertical surfces over 10mm thick rendering in CM 1:4 all as specified and directed. |
| 35 | M & L Non Skid colouredceramic tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm screed bed or bedding layer CM1 : 6 complete all as specified and directed. |
| 36 | M & L for coloured jointfree glazed ceramic tiles 450 x 300 x 6 to 7 mm thick on vertical surfaces such as skirting/ dado , set and jointed in neat cement slurry and pointed in white coloured cement with pigment to match the colour of tiles over and including 10mm thick rendering/bedding layer in CM 1:4 on brick work /stone masonary or concrete surfaces. |
| 37 | M&L glazed ceramic coloured tiles size 300x200 x 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cementmortar 1:4 complete all as specified and directed. |
| 38 | M & L for vitrifiedceramic tiles 8 to 10mm thick light shade(Square/rectangular) polished, area of each tiles n. exc 0.36 Sqmin floors, set and jointed in neat cement slurry and pointed in white or coloured cement to match and the shade of the tilesincluding 15mm screed bed or bedding layer CM1 : 6complete all as specified and directed. |
| 39 | M & L for vitrifiedceramic tiles 8 to 10mm thick light shade (Square/rectangular) polished, area of each tiles n. exc 0.36 Sqminskirting, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of the tilesincluding 10 mm thick renderingCM1 : 4complete all as specified and directed. |
| 40 | M&L 25 mm thick PCC ,type B-1 using (20 mm graded stone aggregate) in toping layer of flooring complete all as specified and directed. |
| 41 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD landcomplete all as specified and directed. |
| 42 | M & L for providing machine cut kota stone slab mirror finishedflooring 20-25mm thick over cement screed base/renderinglaid and jointed as in floor/steps (treads/risers/dados etc ) with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete over 15mm thich screed bed in CM 1:6complete all as specified and directed.. |
| 43 | M&L for 20-25 mm thick Kota stone tiles (Pre-mirror polished), in riser of steps, skirting,dado etc, set and jointed in neat cement slurry and pointed in coloured cement to match tiles including rounding the edges of kota stone over and including10mm thick backing coat in cement mortar (1:4), surfaces finished even and rough to receive tiles, including Taking down cement plaster on brick walls or stone walls any descrition etc including raking out joints, hacking for key, scrubbing down with water etc all as specified and directed. |
| 44 | M&L granite (of any type) work ( table rubbed & polished), 18 to 20mm thick, in steps, jambs, pillars, window-cill, cooking platforms & like in cement mortar (1:4) including polishing of chamfered edges and pointing in white cementusing marble dust with admixture of pigment to match with shade of granite over and including 15mm thick screed bed in CM (1:6) necessary cutting, notching etc for sinkcomplete all as specified and directed. |
| 45 | M&L Machine cut cudappah stone slab 20mm to 25 thick, over and including cement screed bed in CM 1:6laid and jointed in grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishingcomplete necessary cutting, notching etc for sinkcomplete all as specified and directed. |
| 46 | M&L for Chamfer, splays, or arris in facework of cudappah stone exc 15mmbut nexc 50mm wideon granite (or) trap stone complete all as specified and directed. |
| 47 | M&L for drilling holes for pipes etc in cuddapah including RCC slab n exc 40mm dia and nexc 100 mm depthcomplete all as specified and directed. |
| 48 | M&L for PCC 75mm thick type B2 (1:2:4) using 40mm graded stone aggregate) in plinth protection, joints should be filled with bitumen primer etc, complete all as specified and as directed. |
| 49 | M&L for morum filling/redbajri fillingunder floors or in foundationds including watering &consoldation laid in layers n.exc 15 cm thick spread levelled and well rammedcomplete all as specified and as directed. |
| 50 | M&L for 100 mm thick cement concrete type D-2, 1:4:8 (using 40mm graded stone aggregate) as in Sub-base to floor finishes.complete all as specified and as directed. |
| 51 | Material and labour Providing and laying 60 mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern and conforming to IS 15658 : 2006 as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed. |
| 52 | M&L for 75 mm thick sub base in PCC 1:4:8 type D-2 (using 40 mm graded stone aggregates) complete all as specified and as directed. |
| 53 | M&L 75mm thick PCC type C-2 (1:3:6) (using 40 mm graded crushed stone aggregate) as in plinth protection laid in panels, finished even and fair, complete all as specified and as directed. |
| 54 | M&L Chequered cement concrete tiles rubber moulded 20cm x 20cm x 25mm thick set, jointed and pointed in neat cement slurry in floors, withgrey cement and pigments over and including 15 mm thick screed bedding in CM 1:6 complete all as specified and as directed. |
| 55 | S&F, solid PVC wall panelling consisting of 5mm thick wood grain painted fixed over PVC sheet fillet of width 35mm inclusive of solvent cement and fixing at site on PVC frame complete all as specified and directed. |
| 56 | Dismantling of wall and ceiling boards (fibre, pulp,insulation etc) or insulation boards/slabs/blankets any thickness, including cover fillets etc complete all as specified and directed. |
| 57 | S & F595x595mmx4mm thick Gypsum board laminated with PVC Sheetas in false ceiling including supply and fixing \"Tee\" grid frame work made of GI sheet 0.30mm thick, bottom portion painted with cellular nitro painting, consisting angle cleats of size 25mm wide 1.6mm thick with flag fixed to RCC ceiling with dash fastener or wraping the suspending wire around the existing wooden/steel purlin/rafter for suslpending grid frame work of size 600mmx600mm suspended with 02 Nos, 1.60mm dia GI wire @ 600mm C/C on main Tee and fixed to T-gridas per manufacturer direction.The section consisting of main Tee 37mm x24mmx0.60mm thick, cross runner tee 37mmx24mmx0.60mm and. Perimeter angle 24mmx24mmx0.50mm thick shall be fixed to wall with GI screw of 40mm long @ 450mm C/C along the perimeter of wall including or wall including all as per manufacturer\"s instruction complete all as specified and as directed. |
| 58 | S&F in repair Stainless steel curtain rod/rail25 mm dia medium weightwith premium quality incl SS brackets with decorative caps as approved complete all as specified and as directed. |
| 59 | S & Fixed in repair Vitreous china, wash down water closet pan (pedestal pattern), white, including plastic water closet seat cover, closed pattern with flat bottom,connection to drain (or outgoing pipe) and to flushing pipe, antisiphonage pipe etc, complete all as specified and as directed. |
| 60 | S & F Colour EWCsingle piece-mounted toiletmodel LYS-IVY -0204 of Jaquar / Cera CAT NO S10 44147RG / Hindware Ittalian collectionCAT NO92538 or equvlent as approved by GE ‘S’ trap vitreous china EWC including all fittings i.e seat cover, cistern super water saver dual, flush tank fitted in wall hungof same complete all as specified and as directed. |
| 61 | S&F Two way Bib cock with wall flangeJaquarFLP 5041P / Hindware F530004 CP or equvalent as approved by GE of same makecomplete all as specified and as directed. |
| 62 | S&F in repair vitreouschina sqatting pan (orissa pattern) size 580mm x 440mm, white with integral foot rest, any pattern including provision of cement concrete bedding (excluding fulshing cistern and flush pipe) with S or P trap, Fixed in repairs, complete all as specified and directed. |
| 63 | S&F in repairs low level Flushing cistern 10 ltr capacity, PVC valveless syphonic action type, white with inlet, ball valve, float valve and handle, flush pipe, incl brackets and flushing pipe etc complete all as specified and directed |
| 64 | S&F in repairs vitreous china, white, wash hand basin, flat back size 550mm x 400mm \"including MS brackets including cutting for and pinning in, including waste pipe complete all as specified and directed |
| 65 | S&F in repair 600mm x 450mm size and 5.5mm thick looking mirror, bevelled edge of selected quality glass with aluminium frame made of channel alround,mounted on 6mm thick commercial ply or AC building board, fitted to wooden plug with CP screws.complete all as specified and directed. |
| 66 | S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand &over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 67 | S&F in repair chromium plated brass Central hole basinmixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 68 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges,complete all as specified and as directed. |
| 69 | S&F in repairs Health Faucet ABS body with Rubbit Cleaning System, 1.25 m Long PVC Flexible Tube & ABS Wall Hook. complete all as specified and as directed. |
| 70 | S&F in repair 110mm dia Cast iron nahani trap with CP grating includingjointing to waste pipe fixed in cement concrete type B-1 (1:2:4 using 20mm graded stone aggregate) complete all as specified and directed |
| 71 | S&F in repair stainless steel kitchen plate rack size 600 x 900 x 150mm of approved pattern made out of stainless steel sheet 0.63mm thick sheet with round 8mm dia rods including hanging arrangements complete all as specified and as directed. |
| 72 | S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm long complete all as specified and directed. |
| 73 | S&F Grating 100mm dia of CP with or without hole complete all as specified and directed. |
| 74 | S&F in repair 15mm bore bib tap long body cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and as directed. |
| 75 | S&F in repair 125mm size Brass Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union complete all as specifed and directed. |
| 76 | S&F in repair 15mm bore brass chromium plated pillar tap, fancy type with or without lettered \"Hot\" or \"Cold\", with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and as directed. |
| 77 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long complete all as specified and as directed. |
| 78 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittingsand wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 79 | S&F in repair stainless steel kitchen plate rack size 600 x 900 x 150mm of approved pattern made out of stainless steel sheet 0.63mm thick sheet with round 8mm dia rods including hangine arrangements complete all as specified and as directed. |
| 80 | Taking up or down 15 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed |
| 81 | S&F in repair laying and testing for 15mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 82 | Taking up or down 20 mm bore steel tubing and connections, including cleaning for re fixing complete all as specifed and directed |
| 83 | S&F in repair laying and testing for 20mm bore GI tubing medium grade galvanised steel tubing including all fittings such as union, reducer, sockets, reducing bends elbows tee, checknuts, caps, plugs etc fixed to wall and ceilling or laid in floors complete all as specifed and directed. |
| 84 | S & F of CPVC 20 mm outer dia pipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed. |
| 85 | S & F of CPVC brass elbow (3/4\" X ½\") for 20mm outer dia CPVC pipe complete all as specified and directed. |
| 86 | S & F in repairs Stop cock / angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions.complete all as specified and as directed. |
| 87 | S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and as directed. |
| 88 | S & F in repairs Hand shower 1.5 m CP Flexible SS Tube , 5 flow Hand Shower , adjustable wall hook , rubbit cleaning system complete all as specified and as directed. |
| 89 | S & F in reparis Flexible waste pipe for wash hand basin fittled to Wash Hand Basin incl all necessary brackets etc complete all as specified and as directed. |
| 90 | S & F in repairs 32/40 mmPVCdownpipe for kitchen sink fittled to Kitchen Sink incl all necessary brackets etc complete all as specified and as directed. |
| 91 | S& F in repairs Flush Pipe of polyethylene of low or high density or PVC , 32 mm dia, for low level cistern |
| 92 | S&F in repair 15mm size PVC connections internally threaded with PVC washer,PTMT nuts of length 450mm complete all as specified and directed. |
| 93 | S & F in repairs Corner Glass Shelf of Size 320 x 320 mm with Silver chromium finished border Oval Rangepremium qualitycomplete all as specified and as directed. |
| 94 | Hacking out old broken glass (any thickness, size, quality or description) from metal frame incl punching or drilling out old glazing pins/spring clips and providing and fixing new ones. |
| 95 | M&L for 4mm thick sheet glass, ordinary quality and glazing with oil putty and fitted in wooden/ steel window in square n exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 96 | M&L for 4mm thick sheet figured glass, pin headed type and glazing with oil putty in square n exc 0.5 Sqm in each pane complete all as specified and as directed. |
| 97 | S&F in repairs stainless steel wire cloth, 0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed. |
| 98 | S&F inrepair 1000 litres capacity Rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) hoistedincl fixing of 20 mm dia float valve and fixed in position including removing the existing water tank all as specified in SSR Part I complete all as specified and as directed. |
| 99 | S&F in repair 500ltr capacity rotational moulded polythelene water storages tanks (cylindrical verticle with closed top) hoisted incl fixing of 20 mm dia float valve and fixed in position including removing the existing water tank all as specified in SSR Part-I complete all as specified and as directed. |
| 100 | Taking down chowkats or frame of any description exc 1.5 Sqmand n.exc 4Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 101 | Taking down Shutters of any description exc 1 sqmbut n. exc 2 sq. m each of any description complete all as specified and directed. |
| 102 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premisescomplete all as specified and directed. |
| 103 | Taking down Shutters of any description n. exc 1 sq. m each of any description complete all as specified and directed. |
| 104 | S&F Pressed steel door frame for single door, size 105 x 60 x 1.25mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 using 20mm graded stone aggregate, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb in to the wall complete all as specified and as directed. |
| 105 | S&F Pressed steel door frame for single door, size 165 x 60 x 1.25mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc., including Cutting holes in brick walls built in cement mortor for inserting holdfasts and making good dismantled portion in cement mortor 1:3 or cement concrete 1:2:4 Type B-1 using 20mm grade stone aggregate, depth of embedded portion of holdfasts exc. Half brick but not exc. One brick from the face of the jamb in to the wall complete all as specified and as directed. |
| 106 | S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel.complete all as specified and as directed. |
| 107 | S& F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS Square tube suppling and fixing in opening as per specification and drawing.complete all as specified and as directed. |
| 108 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottom rails. M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip if 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bootom rail on either side & as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling and fixing in the frame at site complete all as specified and as directed. |
| 109 | M&L 2nd class HWplain solid straight chowkhats and frames worught framed rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed. |
| 110 | S&F IInd class hardwood panelled shutters of 40mm thick (any number of panels) with panels of timber flat on both sides (feathered edged0 or of veneeered particle boad medium density, wood particle board with commercial face veneers, complete all as specified and as directed. |
| 111 | S & F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and as directed. |
| 112 | S & F 35mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc sizeof member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) complete all as specified and as directed. |
| 113 | S & F Factory Made 35 mm thick 100% Solid WPC ( Wood polymer Composite ) Laminated Flush Door Shutter of required size comprising ofvirgin PVC resin of K Value 57-60 ( Suspension Grade ), Calcium Carbonate and natural fibers ( Wood Powders/ rice husk/ wheat husk ) and Non toxic additives, made from Extrusion process WPC foam sheet Single Extruded ( Inner ) with having minimum density not less than 650 kg/cbmmanufactured byan ISO 9001 - 2015 Certified Company, having good screw holding capacity ( Screw Withdrawal strength of 50 N ( Face ) & 1100 N ( Edge ), Minimum Compissive of 50 N/mm2, Modulus of elasticity 850N/mm2 and resistance of spread of flame of Class A category with Property of being Termite/ Borer Free.Water/ Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutterand fixing stainless Steel butt hinges of required size with necessary full body threaded star headed counter sunk SS Screws. complete all as specified and as directed., Material test certificate and authentication should be compulsory provided by the manufacturing company complete all as specified and directed. |
| 114 | S & F 30 mm thick FACTORY MADE WIRE MESHSOLID WPCDOOR SHUTTER consisting ofDensity 500 Kg /CbmManufactured by an ISO-9001-2015 certified Company , Door to be panelled with SS mosquito Mesh and XTN aluminium Mesh for additional strength and safety purpose.(confirming as per IS:4020). The door should be water proof, termite proof, fire retardant and having screw holding capacity. Door to be fixed to frame with 3 nos. M.S powder coated butt hingessize 100mm*25mm*2mm and 32mm long steel screws drilled suitable to pass through both the walls of the M.S tube.Other hardwares should be fixed with 19*6mm size steel screws etc. complete all as specified and as directed. |
| 115 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 116 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with HDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 117 | S&F 150mm size aluminium, anodised barrel tower bolt of extruded section.complete all as specified and as directed. |
| 118 | S&F 125mm size aluminium, anodised barrel tower bolt of extruded section.complete all as specified and as directed. |
| 119 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy.complete all as specified and as directed. |
| 120 | S&F 100mm size, butt hinges, medium weight, cold rolled mild steel.complete all as specified and as directed. |
| 121 | S&F 150mm size extruded aluminium alloy handles, fabricated type.complete all as specified and as directed. |
| 122 | S&F 125mm size extruded aluminium alloy handles, fabricated type.complete all as specified and as directed. |
| 123 | S & F of CPVC 20 mm outer dia pipesSDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking up or down steel tubing pipes complete all as specified and directed. |
| 124 | S & F of CPVC brass elbow (3/4\" X ½\") for 20mm outer dia CPVC pipe complete all as specified and directed. |
| 125 | S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet/ cupboard shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5 mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as specified and as directed. |
| 126 | S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. |
| 127 | S & F in repairs factory made PVC shelf/ partition of required size consisting of panel of 12mm thick required size consisting of panel of 12mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18 mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 12mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc. |
| 128 | S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed |
| 129 | S&F 50 x 15mm size magnetic door catcher for closing for PVC door shutter complete all as specifid and directed. |
| 130 | S& F 100mm size MS matt/ glossy finish handle complete all as specfied and directed. |
| 131 | S&F modular type stainless steel cutlery basket size 20 x 19 x 4 inches (dia of wire not less than 3.00mm) of any shape withside sliding roller clip and silding rails on both side fixed with steel screws incl all fixing arrangements complete all as specified and directed. |
| 132 | Discription all as per ser item No 131.00 above above but cup and saucer basket size 20 x 17 x 4 inches complete all as specified and directed. |
| 133 | Discription all as per ser item No 131.00 above but plain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 134 | Discription all as per ser item No 131.00above but grain basket size 20 x 19 x 6 inches complete all as specified and directed. |
| 135 | Discription all as per ser item No 131.00 above but thali basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 136 | Discription all as per ser item No 131.00above but plain basket size 20 x 19 x 8 inches complete all as specified and directed. |
| 137 | Taking down eaves gutters and rainwater pipes (any size of pattern), including all fittings, heads, shoes, bends, swan-necks etc including cleaning or refixing or removal to store Complete all as specified and directed. |
| 138 | S & F 110mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to wallsor laid in floors or trenches including digging and making good as existing.Complete all as specified and directed. |
| 139 | S & F 75mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to wallsor laid in floors or trenches including digging and making good as existing.Complete all as specified and directed. |
| 140 | S & F PVC (SWR)floor trap 75mmbore plain with grating including jointing with solvent cement Complete all as specified and directed. |
| 141 | S & F PVC (SWR) bends 110 mm dia with access door Complete all as specified and directed. |
| 142 | S & F PVC (SWR) bends 75 mm dia with access door Complete all as specified and directed. |
| 143 | S & F PVC (SWR) bends 110 mm dia. Complete all as specified and directed. |
| 144 | S & F PVC (SWR) bends 75 mm dia Complete all as specified and directed. |
| 145 | S & F PVC (SWR) vent cowl 110 mm dia Complete all as specified and directed. |
| 146 | S & F PVC (SWR) vent cowl 75 mm dia Complete all as specified and directed. |
