|
| 1 | Note 1: (Applicable for all parts/items) : The bidders/contractors are advised to read tender document, all drawings & all corrigendum/amendments and general condition of contracts before entry/quoting the rates.Note 2:- Attention to bidder is hereby invited to upload revised BOQ if published during their bid submission. Uploading ofincorrect/ pre-revised BOQ shall be treated as non bonafide and rejected. Fixed credit has been given in technical documents which shall be taken into account during acceptance of bid/tender. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frame) exc 1.5 sqm and n.exc 4 sqm each, complete in all respect as specified and directed. |
| 3 | S&F Rooftrusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, tubular/hollow section, channel or flat sections) including distance pieces, cleats etc. using Fe-410W (Grade E-250 quality \"A\") including necessary welding at any height complete all as specified and directed. |
| 4 | S&F exposed GI powder coated snap grid frame work for false ceiling in flat or in sloping at any height, of grid size 600x600mm comprising of wall/cleat angle of size 25x25x0.35mm and cross tee of size 24x38x0.70mm with 2mm dia GI wire as suspender and including 3.5-4mm thick decorative, pre -painted, non asbestos board (E-Board) in false ceiling including fixing arrangement from steel/wooden truss of any type including dismantaling of existing false ceiling complete all as specified and directed. |
| 5 | S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. or for window grill of appd size and shapeincluding fixing with aluminium \"U\" shape section for fixing etc. complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 6 | S&F powder coated anodised aluminium door shutters, aluminium section weighting 0.55 kg/ m incluuding necessary joining cleats, galzing, clips, rubber neiopren e packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading screws etc. complete in all rerspect as specified and direced. |
| 7 | S&F powder coated aluminium sliding window with/without sash bars, aluminium sections of thickness 2mmincluding necessary joining cleats, glazing clips, EPDM rubber packing (of 50 No grade), powder coated aluminium snap beading, screws, center grooved stainless steel ball-bearing double roller2 position height adjustment, sound/dust brush, recessed handle with locking arrangement complete in all respect as specified and directed. (Powder coating shall be min 50micron) (Note:all external members to be joined at 45 degree angle at corner) |
| 8 | S&F 4 mm sheet glass, ordinary quality and glazing with oil putty(if required) in square exc 0.5 Sqm in each pane complete in all respect as specifified and directed. |
| 9 | S&F double action floor spring hydraulically regulated made up of minimum 1.25 mm thick alloy sheet foundation box, main body with stainless steel cover,governing pivot made of brass, other parts made of mild steel heavy duty complete all as specified and directed |
| 10 | M&L for preparation of new undecorated steel surface of any description not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete in all respect as specified and directed. |
| 11 | M&L brick work sub class B, class designation 75 old size bricks, straight or curved on plan exceeding 6 m mean radius built in CM 1:4 complete in all respect as specified and directed. |
| 12 | M&L 25mm thick PCC (1:2:4) type B-0 using 12.5 mm nominal size crushed and graded stone aggregate in coping, hold fasts or of similar items finished surface even and smooth without using extra cement including necessary cutting, form work etc. complete in all respect as specified and directed. |
| 13 | Taking down chowkats and shutters (without taking off shutters from the frame) n.exc 1.5 sqm each, complete in all respect as specified and directed. |
| 14 | M&L for half brick work with subclass ‘B’ old size bricks of class designation 75, straight or curved on plan exc. 6m mean radius built in CM (1:4) complete in all respect as specified and directed. |
| 15 | Providing and laying skid/non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick screed bed in cement mortar (CM) 1:6, including dismantling of existing surface complete all as specified and directed. |
| 16 | Providing and laying coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.08 sqm but not exceeding 0.18 sqm, in skrting/dado etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match tile colour over 15 mm thick rendering in cement mortar (CM) 1:4, including dismantling of existing surface complete all as specified and directed. |
| 17 | M&L for any colour of granite stone without white spots Granite stone slab 20 mm thick, as in floor, dado, steps, laid over and including screed bed 15 mm thick in cement mortar (CM) 1:6, jointed and pointed with white cement mixed with pigment to match the shade of stone including cuttingl rubbing and polishing surface, including cutting for wash hand basin, sink, gas pipe hole etc., to the entire satisfaction of the Engineer-in-Charge, complete in all respect as specified and directed. |
| 18 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of wall in cement mortar (1:4), finished even & smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 19 | M&L 15 mm thick plastering on brick/ stone/ concrete surfaces of of wall in cement mortar (1:6), finished even and smooth without using extra cement, including taking down existing surface complete all as specified and directed. |
| 20 | Supply only water proofing compound complete, in all respect as specified and directed. |
| 21 | S&F 16mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings in trenches with all fittings fixed complete to walls and ceiling or laid in floors including necessary cutting, chasing etc including taking down existing pipe complete all as specified and directed. |
| 22 | S&F 20 mm bore of tubes, \"medium grade\" galvanised, with all fittings and fixed complete to walls and ceilings or laid in floors including taking up or down including necessary cutting, chauging etc.including taking down existing pipe complete all as specified and directed. |
| 23 | S&F 75 mm size of butt hinges stainless steel, complete in all respect as specified and directed. |
| 24 | S&F 100 mm size of stainless steel butt hinges ISI marked, complete in all respect as specified and directed. |
| 25 | S&F for solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with M.S. square tube, supplying & fixing in opening as per specification & drawing, complete in all respect as specified and directed. |
| 26 | S&FFactory Made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 27 | S&F powder coated aluminium ventilator with half portion louvered (adjustable)with 4mm thick glass in louver and balanced portion fixed 4mm thick frosted glass glazing including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings complete in all respect as specified and directed. |
| 28 | S&F 4 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete in all respect as specified and directed. |
| 29 | S&F stainless steel wire cloth,0.36 mm nominal dia of wire and average width aperture 1.40 mm and fixed with stainless steel wire staples fixing withbeads, complete in all respect as specified and directed. |
| 30 | S&F 30 mm thick Flush shutters, solid core construction, with block board core with decorative face veneers with lipping on both sides, complete in all respect as specified and directed. |
| 31 | S&F aluminium anodised, barrel tower bolt of extruded section 200 mm long, complete in all respect as specified and directed. |
| 32 | S&F Aluminium handle cast type anodised 125 mm, complete in all respect as specified and directed. |
| 33 | S&F aluminium anodised sliding door bolts with hasp and staple (boilt type) 16 mm dia bolt, 250 mm long, with and including a minium of 6 bolts and nuts four on bolt plate and two on staple plate, complete in all respect as specified and directed |
| 34 | S&F mild steel 300 mm, ordinary rat tail rod pattern springs, including roller and roller plate, complete all as specified and directed. |
| 35 | S&F 5.50 mm thick ofbevelled edge mirror of selected quality decorative type designer mirror with chromium plated brass screws and cup washerscomplete all as specified and directed. |
| 36 | S&F chrome finished toilet paper holder of cast copper alloy complete all as specified and directed. |
| 37 | S&F Vitreous China urinals, full stall type (back or corner wall type), complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern complete all as specified and directed. |
| 38 | S&F 8 mm thick curved shaped urinal partition with frosted glass size 900 x 450 mm including stainless steel fixing brackets complete all as specified and directed. |
| 39 | S&F in repair Single unit (single piece) wash down water closet panwhite including plastic water closet seat cover white, Single unit with flat bottom, new CI/UPVC \"P\" or \"S\" type trap and mild steel chromium plated hinging devicecomplete in all respect as specified and directed. |
| 40 | S&F PVC connection 15 mm size with PTMT nuts of length 450 mm, complete in all respect as specified and directed. |
| 41 | S&F in repairs 15 mm bore fancy type CP finished angle valves, cast copper alloy, screwed down, high pre-ssure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete in all respect as specified and directed. |
| 42 | S&F in repair Health faucet cast coper alloy CP finish 15 mm dia fancy type with brass plated flexible hose and wall hook, 1.00 mtr complete all as specified and directed. |
| 43 | S&F CP finish cast copper alloy, two way bib cock complete all as specified and directed. |
| 44 | S&F Tubular towel rail, 20 mm dia, D type, 60 cm long between flanges cast copper alloy, chromium plated finish, complete in all respect as specified and directed. |
| 45 | S&F in repair Counter Top Basin, Size: 420 x 420 x 155 mm including Waste coupling 32 mm SS and Bottle Trap 32mm Size with 300mm & 190mm Long Wall Connection Pipes & Wall Flange and including swan neck pillar tapcomplete in all respect as specified and directed. |
| 46 | S&F 75 mm dia of outlet, PVC (SWR) nahani trap, plain with SS grating of size 150mmX150mm, 0.75mm thick openable at center including jointing with solvent cement, complete in all respect as specified and directed. |
| 47 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 48 | S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore including necessary MS pipe clamp, complete in all respect as specified and directed. |
| 49 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 110 mm bore, complete in all respect as specified and directed. |
| 50 | S&F PVC (SWR) pipes single sockedted in any length with rubber ring joints laying in trenches 75 mm bore, complete in all respect as specified and directed. |
| 51 | S&F PVC (SWR) single (single \"T\") equal or unequal 110mm bore pipe with access door, complete in all respect as specified and directed. |
| 52 | S&F PVC (SWR)single (single \"T\") equal or unequal 75mm bore pipe with access door, complete in all respect as specified and directed. |
| 53 | S&F PVC (SWR) bends any radius 110 mm bore, complete in all respect as specified and directed. |
| 54 | S&F PVC (SWR) bends any radius 75 mm bore, complete in all respect as specified and directed. |
| 55 | S&F PVC (SWR) vent cowl 110 mm dia bore, complete in all respect as specified and directed. |
| 56 | Supply and fixed unplasticised PVC (SWR) Gully trap125/110 mm, setting and jointing with solvent cement complete in all respect as specified and directed. |
| 57 | M&L for precast RCC, type B-1, 1:2:4 (using 20 mm crushed and graded stone aggregate) as in manhole covers/ cover slabs or of similar type slab works, etc. incl necessary formwork and loading/ unloading of the same and fixed in position, complete in all respcet as specified and directed. |
| 58 | Providing and laying reinforced concrete slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like using 1:2:4type B-1, (using 20 mm crushed and graded stone aggregate) complete in all respcet as specified and directed. |
| 59 | M&L for formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work all not exceeding 20cm wide complete in all respcet as specified and directed. |
| 60 | M&L for formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete in all respcet as specified and directed. |
| 61 | S&F 10 mm dia and over TMT bar cut to length bent to shape required including cracking bending spiarlly for hoping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.90 mm dia or securing with clip, complete in all respect as specified and directed. |
| 62 | Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth for foundation, etc, not exc 10 sqm on plan and n exc 1.5 m depth and getting out in soft/loose soil complete all as specified and directed. |
| 63 | All as per item No. 1 here-in-before but depth exc 1.5m and n.exc. 3.0m complete all as specified and directed. |
| 64 | Excavating over areas, n exc 1.5 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 65 | Excavating over areas, exc 1.5 m but n.exc 3.0 m deep and getting out in soft/loose soil complete all as specified and directed. |
| 66 | Returning & filling of the excavated earth including spreading, levelling, watering and well ramming in layers not exceeding 25 cm thick with soils complete all as specified and directed. |
| 67 | Removing excavated material (soils) exc 250 m but not exc 500 m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and directed. |
| 68 | M&L Boulder pitching, laid dry, hand packed tightly complete all as specified and directed. |
| 69 | Plain Cement Concrete Type D2 1:4:8 ( using 40 mm graded granite stone aggregte) in foundations, filling and mass concrete complete all as specified and directed. |
| 70 | M&L for brick work with fly ash bricks straight or curved on plan exc 6 mtr mean radius, built in CM (1:4) all as specified and directed. |
| 71 | Hardcore gauge exc 63mm but n.exc 100 mm of broken stone deposited, spread and levelled in layers n.exc 15cm thick, watered and well rammed to a true surface complete all as specified and directed. |
| 72 | Sand filling under floors or in foundations including watering and consolidation complete all as specified and directed. |
| 73 | Providing & laying heavy duty non skid coloured digital printed floor tiles of area exc. 0.09Sqm but n.exc.0.16 Sqm, 8 to 10mm thick set and jointed in neat cement slurry and pointed with white cement with pigment to match the tiles colour over and including 15mm thick screed bedding in cm 1:6 and dismentling of existing tiles/blocks of any discription complete in all respect as specified and directed. |
| 74 | M&L in repairs for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60mm thickness, M-35 Grade with grey cement and pigment complete in all respect as specified and directed. |
| 75 | M&L Foundations, including rafts,footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed. |
| 76 | S&F 6mm to 8mm dia TMT bar cut to length bent to shape required including cracking bending spiarlly for hoping for columns, hooking ends and binding with and including Mild Steel wire (annealed) not less than 0.90 mm dia or securing with clip, complete in all respect as specified and directed. |
| 77 | M&L40 mm thick flooring in Plain Cement concrete type B-1,( 1:2:4) (using 20mm graded stone aggregate) finished even and smooth using extra cement complete all as specified and directed. |
| 78 | S&F Multicolor Floating Water Fountain (Design as approved by EIC) complete all as specified and directed. Material : SS/BrassColor :MulticolorProduct Type : Floating FoutainNozzle Type : Finger Jet Nozzle, Multidimension NozzleUsage/ApplicationBest suited for lake, and pondNozzle Diameter : 1 inch |
| 79 | S&F 150mm bore PVC SWR pipes single socketed, in any length with rubber ring joints laid in trenches or floors complete all as specified and directed. |
| 80 | S&F 150 mm diaPVC (SWR) junction single (Single T) equal or unequal complete all as specified and directed. |
| 81 | S&F PVC (SWR) bends any radius 150 mm dia complete all as specified and directed. |
| 82 | PVC (SWR) 150 mm branch piece, double (double Y) equal or unequal complete all as specified and directed. |
| 83 | S&F Gravity flow filter unit of 50 mm bore complete all as specified and directed. |
| 84 | S&F UPVC Ball valve of 100mm bore complete all as specified and directed. |
| 85 | S&F PVC Rotational moulded polyethylene water storage tanks of 5000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and directed. |
| 86 | S&F gun metal, globe or gate valve 20 mm dia with iron wheel head, screwed both ends for iron pipe complete all as directed. |
| 87 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 90 mm ,including fittings complete all as specified and directed. |
| 88 | Supply and lay 3 layer ( inner antimicrobial, outer UV stabilized) ISI marked,IS-15801, PP-R pipes SDR 7.4 (PN-16) and PP-R plain fittings in trenches/walls/cellings or laying in floors complete of size outer dia 63 mm ,including fittings complete all as specified and directed. |
| 89 | M&L for Installation of Pumping sets, centrifugal, electric driven,of capacity 5 HP make KirloskarKDS 515+, 5 HP, Three Phase, 400 Volts, Size 100mm X 100mm inclusive of suitable 3 core copper cable ,outdoor protection structure for pumping set and PCC foundation all complete as specified and directed. |
| 90 | Supply and fix Sluice Valve, flanged of class 1.6 PN, 80 mm (3”) dia complete all as specified and directed. |
| 91 | Supply and fix Sluice Valve, flanged of class 1.6 PN, 65 mm complete all as specified and directed. |
| 92 | Supply and fix Non Return Sluice Valve, flanged of class 1.6 PN, 80 mm (3”) dia complete all as specified and directed. |
| 93 | Supply and fix Foot Valve conforming to IS 4038, 80 mm (3”) dia complete all as specified and directed. |
| 94 | Supply and fix Non Return Sluice Valve, flanged of class 1.6 PN, 65 mm complete all as specified and directed. |
| 95 | Supply and fix Foot Valve conforming to IS 4038, 65 mm all complete as specified and directed |
| 96 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with multi stranded aluminium conductor of size 16.0 sq mm 4 core all complete as specified and directed. |
| 97 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25.0 sq mm 4 core complete all as specified and directed. |
| 98 | M&L for Earthing complete with GI plate electrode of size 600x600x6 mm thick buried directly in ground with earth pit not less than 3 meter deep below ground level with top edge of plate not less than 2.4 meter below normal ground level connected to GI earth wire 4mm dia earth lead up to 7.5 mtr by means of nuts, bolts, check nuts, washers of tinned brass,protected by galvanized iron pipe 20mm bore (Medium grade) allas directed including cement concrete (1:3:6) type C-1 earth pit with precast RCC (1:1.5:3) type A-1 cover slab of size 42 x 42 x10cm thick reinforced with 8mm dia TMT bars @ 15 cm c/c both ways with 10mm dia mild steel round bar of 30 cm long, bent to shape as lifting handle, funnel,wire mesh, 20 mm bore galvanized iron pipe (medium grade) for watering,including charcoal or coke and salt in alternate layers and filling earth pit with fresh vegetable soil below GI plate and above upto ground level as required andnecessary earth work in soft/loose soil complete all as shown in electrical plate No 5 of SSR Part I including testing on completion all complete as specified and directed. |
| 99 | Supply , install, testing and commissioning of LT panel board outdoor type, CPRI approved , platform mounted factory made, totally enclosed dust and vermin proof openablefrom both front and rear side made out of 14 SWG (3mm) thick CRCAMS Sheet and built upon suitable size angle ironframe work , having front and rear hinged doors, lifting lugs (2 Nos) , earthing strips at rear side , bottom detachable gland plate complete with suitable size zinc plated and passivated nut, bolts , spring and washers.The cabinet and all members should be chemically treated with MSR solution for anticorrosive treatment and apply spray paint with two coat of synethetic enamel paintover a coat of red oxide primer. The panel should be suitable for 415 volts , 50Hz , 3 phase4 wire systemand internal connection should be provided with aluminium strips of suitable size and necessary foundation workand comprisingfollowing:- (a) Bus bar 100 A, 50 KA breaking capacity, IP 54, 04 Nos and accessories.(b) Incoming MCCB, 4 pole, 63 Amps, 415 Volt AC, 25 KA rupturing capacity --01 No.(c) Outoing MCCB, 3 pole, 32 Amps, 415 Volt AC, 25 KA rupturing capacity--02 No.(d) Ougoing MCB SPN 32 Amps, 10 kA, \"C\" series, 240 volts--01 Nos. (e) Ammeter & Voltmeter--01 Set.(f) Starter 5HP-01 |
| 100 | M&L for point wiring with 1.5 sqmm (nominal area) FRLSH, PVC insulated stranded copper conductor single core including non metalic PVC conduit medium grade of size not less than 20 mm dia concealed in wall/as per site requirement, modular metal boxes of required size and with all accessoriesincluding 1.5 Sqmm FRLSH PVC insulated sheathed multistranded copper earth conductor to common earth and connected to earth dollyfor fan / light / exhaust fan controlled by one switch. Note:- (i) Cost of PVC conduit,modular plates,cover plates of suitable module etc; are deemed to be included in the quoted rate. (ii) M&L for cutting chases on walls / ceilingand making good disturbed surfaces including finishing with cement mortar (1:3) etc; are deemed to be included in the quoted rate including taking down existing point wiring complete all as specified and directed. |
| 101 | All as per item 99 above but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable complete all as specified and directed. |
| 102 | All as per item 99 above but for 3 pin 16 Amps switch socket combination on independent board with 4 sq mm copper cable complete all as specified and directed. |
| 103 | All as per item 99 above but for 5 Amps socket point on the same board controlled by one switch complete all as specified and directed. |
| 104 | S&F in replacement of modular switch10A,1 module single pole, one waycomplete all as specified and directed. |
| 105 | S&F in replacement of modular socket outlet 5 pin ,6 Amps,2 module, 240 Volts complete all as specified and directed. |
| 106 | S&F in replacement of modular socket outlet 5 pin ,16 Amps,2 module, 240 Volts complete all as specified and directed. |
| 107 | S&F in replacement of modular switch16A,1 module single pole, one waycomplete all as specified and directed. |
| 108 | S&F in replacement ofceiling rose polycarbonate typethree terminals complete all as specified and directed. |
| 109 | S&F in replacementLED lights fitting 1x 20W, 220V, ACbox type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 110 | Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling of auditorium including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 111 | Supply and fixing round shape 10 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed. |
| 112 | M&L for submain wiring with two single core 1.5 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in PVC conduit medium grade including 1.5 sq mm multi-strand FRLSHPVC insulated copper wire for earth continuity conductor connected to common earth dolly complete incl taking out old unserviceable submain wiring of any type and making good disturbed surface complete all as specified and directed. |
| 113 | Supply and draw submain wiring with two single core 4 sq mm FRLSH PVC insulated copper cable 1100 volts grade multi stranded, sheathed conductor in PVC conduit including 4 sq mm multi-strand FRLSHPVC insulated copper wire for earth continuity conductor connected to common earth dolly complete and making good disturbed surface complete incl taking out old unserviceable submain wiring of any type complete all as specified and directed. |
| 114 | S&Fsingle pole and neutral enclouser with atwo pin and earth plug and socket complete with one pole MCB 20 Amps including taking down existing surface complete all as specified and directed. |
| 115 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 sq mm 3.5 core all complete as specified and directed. |
| 116 | Material and labour for sand cushioning for cable protection using clean dry sand complete all as specified and directed. |
| 117 | Supply and laying in trenches brick common burnt clay building brick, subclass \"B\" designated- 75 with width equal to length of brick for cable protection complete all as specified and directed. |
| 118 | M&L for rewinding of exhaustfan upto 480 mm sweep after dismantlingand taking out the burnt winding coils and rewinding with super enamelled copper winding wire of suitable size and gauge including insulation, Varnishing, drying ,painting etc complete and refixing the same after rewinding and testing complete all as specified and directed. |
| 119 | M&L for refixing of Split Acs (Indoor &Outdoor)after dismantling carefully with all accessories complete all as specified and directed. |
| 120 | S&F sheet metal enclosure double doorfor MCB DBs VTPN 4 way 415 V including 100Amp MCCB as incomer, complete flush mounted including taking down existing surface complete all as specified and directed. |
| 121 | S&F sheet metal enclosure double doorfor MCB DBs SPN 8 way 240 V, complete flush mounted including taking down existing surface complete all as specified and directed. |
| 122 | S&FMCB single pole (SP) 5 to 40 Amps,240 volts , C curve , AC , 50 Hz ,10 kA including taking down existing surface complete all as specified and directed. |
| 123 | S&F MCB Single pole & neutral (SPN)32 Amps, 240 volts , C Curve, AC , 10 kA including taking down existing surface complete all as specified and directed. |
| 124 | M&L for earthing complete with galvanised steel earth plate electrode 60 x 60 cm x 6mm thick buried directly in ground ( earth pit not less than 2.25 M deep below ground level) with top edge of the plate not less than 1.5 Metre below normal ground level connected to GI wire 4 mm dia by means of bolts, nuts , check nuts and washers of GI and GI tubing 15 mm bore light grade for earth lead protection up to main earth test point and including concrete pit in PCC (1:3:6) type C1 pre cast RCC (1:2:4) type B1 cover slab 54 x 54 x 5 cm with one handle for lifting made out of 8 mm dia MS bar, wire mesh, 20 mm bore GI tubing (LG) for watering, charcoal or coal and salt in alternate layers including excavation earth work complete all as shown on electrical plate No. 3 of SSR part - I , including taking out old U/s complete alll as specified and directed . |
