|
| 1 | Taking down cement plaster including racking out joints, hacking for key & scrubbing down with water etc complete all as specified and directed by Engineer - in -Charge. |
| 2 | Dismantling, floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 3 | Demolition of Concrete is ground floors andy pavings n exc 15 cm thickness (below or above ground level)complete all as specified and directed by Engineer-in-Charge. |
| 4 | Demolition of brick work or stone/ boulder masonry, built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facing dressed stone work and precast concrete articles complete all as specified and directed by Engineer-in-Charge. |
| 5 | Demolition ofconcrete of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 6 | Taking down chowkats or frames not exceeding 1.5 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed by Engineer-in-Charge. |
| 7 | Taking down chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutter (without taking off shutter from the frame) removing from site complete all as specified and directed by Engineer-in-Charge. |
| 8 | Dismantling timber scantlings 40 Sqcm and over in section, in any position , framed work complete all as specified and directed. |
| 9 | Dismantling asbestos cement (corrugated, semi corrugated etc) sheets in roofcoveringscomplete all as specified and directed. |
| 10 | Dismantling of wall and ceiling boards (fibre, pulp, insulation, etc.) insulation boards / slabs / blankets of any thickness, including cover fillets complete all as specified and directed. |
| 11 | Dismantling of 100mm bore cast iron/ pvcdrain pipe alongwith fittings and accessoriesjointed in cement mortar and taking out from walls, floors or fromtrenches, if required complete all as specified and directed. |
| 12 | Taking down eaves gutters and rainwater pipes any size or pattern , including all fittings, heads, shoes, bends, swan-necks, etc.,including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) complete all as specified and directed. |
| 13 | Taking up or down15 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 14 | Taking up or down20 mm steel tubingand connections including cleaning for refixing or removal complete all as specified and directed by Engr-in-Charge |
| 15 | Dismantling water tanks500lt& n exc 1000 and removing to store of all retrieved material complete all as specified and directed by Engr-in-Charge |
| 16 | M&L for Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats etc GDE Fe 410-S. complete all as specified and directed. |
| 17 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified. |
| 18 | M&L Pre-painted galvalume curvedaluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in ridge, fixed with self tapping screws as specified. |
| 19 | M&L for E-board false ceiling consisting of powder coated GI wall angle, main T and cross Tof 25mmX 25 mm X 1.40 mm thick grid frame work, joist, angle/ Tee as directed and mild steel wire hook not less than 6 mm dia with arrangement for adjusting height of ceiling and including provn of 4 mm thick E-Classic board in pannelof size 600X600mm with necessary off cut including dismantling of existing false ceiling and taking down and refixing of Electric fitting carefully complete all as specified and directed. |
| 20 | M&L 15mm thick rendering in cement mortar 1:4 to brickmasonry wall surfaces or on other than fair faces of brick wall surfaces finished fair & even without using extra cement for fixing tiles etc complete all as specified and directed |
| 21 | M & L 25 mm thick PCC 1:2:4type B0, using 12.5mm graded aggregate as in floors toreceive surface of tile complete all as specified and directed. |
| 22 | M&L screed bed or bedding layer of mortar, 15 mm thick, in cement mortar 1:6, for laying floor finishes/tiles complete all as specified and directed. |
| 23 | M&L Non- skid coloured ceramic tiles 7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile complete all as specified and directed. |
| 24 | M&L for vitrifiedtiles 7 to 8 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm in floor etc set and jointed in neat cement slurry and pointed in coloured cement to match with colouredtiles complete all as specified and directed |
| 25 | M&L for vitrifiedtiles 7 to 8 mm thick (square / rectangular )area of each tiles exc 0.18 sqm but not exceeding 0.38 Sqm on vertical surfacesetc set and jointed in neat cement slurry and pointed in coloured cement to match with colouredtiles complete all as specified and directed. |
| 26 | M & L 7 to 8 mm thick glazed coloured ceramic tiles ( square/ rectangular) with border , area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, as in vertical surfaces such as skirting or dado set & jointed in neat cement slurry & pointed in coloured cement to match the shade of tiles complete all as specified and directed. |
| 27 | M & L for 75mm thick PCC 1:3:6 , type C-2 using 40 mm graded stone aggregate as in plinth protection laid in slope in 1:30 in alternative bays not exceeding 3 mtr in length.Exposed surfaces finished even and smooth without using extra cement including raking out joints between panel to panel and panel to wall and plugging the same with bitumen mastic using bitumen and sand mixture in 1:3 complete all as specified and directed . |
| 28 | M&L 75 mm thick PCC 1:4:8, type D-2 (using 40mm graded stone aggregate) as in sub base floor / pavings complete all as specified and directed. |
| 29 | M&L in repairs for machine pressed pre-cast concrete interlocking coloured paver block, Glossy finish and shape and size conforming to IS-15658-2006 of 60 mm thickness M-40 grade with grey cement and pigment laid dry over and including 50 mm thick stone dust or sand base and compacted using vibrator complete all as specified and directed. |
| 30 | M&L forreinforced cement concrete 1:1.5:3 type A-1 (using 20mm graded stone aggregate) (nominal mix) as in slabs supported on wall,landing, balconies, shelves and like including bonding agent , complete all as specified (reinforcement to be measured & paid under respective items). |
| 31 | M&L form work to chajja, weather shade, troughs and similar items includingedges for rough finished surfaces of concrete flat, complete all as specified. |
| 32 | M&L form work to edges of concrete flats, treads, breaks in floors window cill, concrete railing opening in conc wall , floor and roof n.exc 20cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10 cm but n.exc 20cm wide for rough finished surfaces of concrete, complete all as specified. |
| 33 | Supply and fix TMT bars, 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) but not less than 0.9 mm dia conforming to Fe-410 - 0, complete all as specified. |
| 34 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6 m mean radius, built in CM (1:6) complete all as spd as directed(Old size). |
| 35 | M&L rendering 15 mm thick in CM 1:6 on brick masonary wall surfaces or on other than fair faces of brick masonry finished even and smooth witout using extra cement complete all as specified and directed. |
| 36 | M&L 15mm thick rendering in cement mortar 1:4 to on brick masonary wall surfaces or on other than fair faces of brick masonary fairfinishedwithout using extra cement with using water proofing liquid @ 0.15 Ltr per bag of cement complete all as specified and directed.(Note : Water proofing liquid shall be measured and paid separately) |
| 37 | Supply Integral water proofing Liquid as specified. |
| 38 | S & F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm thick single side prelam PVC sheet used instead of Plain colour PVC sheet , suppling & fixing in opening as per specification & drawing complete all as specified and directed. |
| 39 | S&F 30 mm thick factory made both side Prelam PVC sheet used instead of Plain colour PVC sheet. Stile and rails feathered at edges consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded palin colour PVC `C\" channel heaving aPanelling of plain colour PVC sheet to be fitted in the M.S frame wedded/ sealed to the stiles, & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing complete all as specified and directed. |
| 40 | S&F mild steel window grills box typeframed work as in window guard bars, grills or forged into spikes, framed balusters, walkway railing and similar work including welding complete FE-290 grade E-165 all as specified and directed. |
| 41 | S&F aluminium alloypowder coated aluminium door frame fixed with side hung shutters and glazing fixed with and including 5.00mm thick tinted glass fixed with rubber gasket with aluminium heading, clips frame made with aluminium box sec as appended below complete all as specified and directed (a) Frame 100x44x1.20mm thick with rawl plug(b) Middle/style rail : 85x44x1.20mm thick(c) Bottom/top rail : 114x44x1.20mm thick(d) Aluminium beading : 0.7mm thick(e) Aluminium handle D type 150mm long, aluminium tower bolt 9.9mm dia shoot 200mm long brass mortise lock 100mm 4 leaver aluminium stopper, cleat double action floor spring hydraulically regulated made of n.less than 1.25mm thick aluminium alloy sheet foundation box main body with stainless steel cover governing pivot made of brass other part of steel heavy duty (f) Making good of wall surface to match with existing surface complete. |
| 42 | S&F Powder coated aluminium sliding windows frame with movable shutter ( sliding on minimum two PVC roller of best quality, for each shutter on threetracks with stainless steel mosquito proofing and glazing shutter and incl 5.00 mm thick glass & stainless steel wire mesh fixed with neoprene rubber gasket with aluminium beading, clips,frame made with aluminium section as appended below- (i) Window frame :95x38mm X 1.15 mm thick for three tracks.(ii) Top/bottom rail and style / rail of shutter : 15x37.5x1.15 mm thick and over. (iv) stainless steel wire cloth 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed in aluminium window or alongwith F/Y section fixed with aluminium wire staples complete.(v)Aluminiumfittings suchaluminium suitable handle with auto interlock cap with suitable size .(vi) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 43 | S&F Powder coated aluminium ventilators box type with louvers & wire mesh fixed with neoprene rubber gasket, aluminium beading, clips. Frame made with powder coated aluminium section of size as appended below (i)frame :45.2mm x35mm X 1.15 mm(ii) Aluminium beading - 0.7mm thick(iii) Glass louvers depth 6 inch. Blade Angle: 38 degrees and thickness of blade 2.02 mm with 106.25 mm spacing.(iv) Aluminium neccessary fittings complete as required.(v) Making good of wall surfaces with silicon to match with existing surfaces complete all as specified and directed. |
| 44 | S & F 150 mm thick Aluminium, anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed. |
| 45 | S&F 150mm size aluminium handles, cast type anodised completed all as specified and directed. |
| 46 | S&F 100 mm size butt hinges medium weight stailess steelcomplete all as specified and directed by Engineer-in-Charge. |
| 47 | S&F 1000 litres, rotational moulded polyethylene of white colour in tripple layer water storage tank (cylindrical vertical with closed top with suitable size ofM S Tasla with suitable locking system ), hoisted and fixed in position complete all as specified and directed |
| 48 | S&F 20mm bore ball brass valve high pressure with polythene float and fly nut complete, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed by Engineer-in-Charge. |
| 49 | S&F15 mm dia steel water tubing galvanized medium grade concealed in all type wallwith all fittings, fixed to walls and ceiling or in floor complete all as specified and directed by Engineer-in-Charge |
| 50 | S&F 20 mm dia steel water tubing, galvanized, medium gradeconcealed in all type wallwith all fittings,fixed to walls and ceiling or in floor complete all as specified and directed |
| 51 | S&F in repairs vitreous chinaware coloured wash hand basin with pedestalofsize 55X45X82cm complete including fancy CP pillar tap, CP Waste coupling ,waste pipe ,complete fixing arrangementand cutting for and pinningin walls & making good complete all as specifed and directed by Eng in charge. |
| 52 | S & F in repair fancy type 150mm size square brass CP shower rose complete all as specified and directed. |
| 53 | S&F in repairs 15 mm dia bib tap fancy type chromium plated with flange quarter turncomplete all as specified as directed. |
| 54 | S&F fancy type chromium plated brass two way bib cocksuitable for 15mm bore pipe complete all as specified and directed. |
| 55 | S&F in repairtubulartowel ringincluding apair ofCP brass bracket complete all as specified. |
| 56 | S&F in repairs 15mm bore PVC connections, with PTMT nuts of length 450mm complete all as specified and directed. |
| 57 | S&F in repair fancy type brass chromium plated soap dish of 160x160x90 mm , complete all as specified. |
| 58 | S&F in repair fancy type chromium plated brass angle valve type suitable for 15mm bore pipe complete all as specified. |
| 59 | S & F fancy type sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with CP bracket gaurd and railling 60 cm long complete all as specified. |
| 60 | S&F in repairs of 20mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed. |
| 61 | S&F in repair vitreous china squatting pan of orrissa pattern long pan size580 x 440 mm white with \"P\"or \"S\" trap size100 mm dia front or back inlet and integral foot rest any pattern (excluding flushing cistern and flush pipe) including provn of lime concrete bedding complete all as specified. |
| 62 | S&F in repairs, PVC low level cistern 10 litres capacity, valve less, symphonic action type with float, handle including 32mm dia PVC flush pipe of polyethylene of low or high density & bracket etc complete all as specified and directed . |
| 63 | S & F Brass CP health faucetwith 8mm Dia 1.0 Meter Long Flexible Tube and Wall Hookscrewecd for iron pipe fancy type long body all as specified and directed. |
| 64 | S&F in repairPVC (SWR) multifloor trap with grating including jointing with solvent cement floor trap 75 mm dia outlet plain with grating including jointing to waste pipe fixed in cement concrete 1:2:4, typeB-1 complete all as specified and directed. |
| 65 | S&FPVC (SWR) 75 mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fitting complete all as specified and directed by Engr-in-charge. |
| 66 | S&FPVC (SWR) 110mm bore pipes single socketed in any length with rubber ring joints fixed to wall and floorwith necessary fittingcomplete all as specified and directed. |
| 67 | S&F PVC (SWR) 110mm bore bends anyradiuscomplete all as specified and directed. |
| 68 | S&F PVC (SWR) 75mm bore bends any radiuscomplete all as specified and directed. |
| 69 | S&F PVC (SWR) 75 mm bore junction single (Single \"T\") equal or unequal with access doorcomplete all as specified and directed. |
| 70 | S&F PVC (SWR) 110 mm bore junction single (Single \"T\") equal or unequal with access doorcomplete all as specified and directed. |
| 71 | S&F designed looking mirror size exc 0.54 sqm to 0.75 sqm of selected quality 6mm thick glass, mounted on fixed to wall with CPplugs with chromium plated brass screws and cup washers, complete all as specified |
| 72 | S&F in repair20 mm dia stainless steel 1.0 mm thick fancy typedroppery rod with decorative design matching brackets as approved and knobs (lattu) or end bracket as required incl fitting with 80 mm long SS screw with 75 mm long wooden gitty of appropriate c/s in each end & intermediate support complete all as specified and as directed |
| 73 | S&F steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confirming to IS 1161-1979 complete all as specified and directed. |
| 74 | M & L for cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, Chajja ( up to IInd floor) etc making good, cutting exc 10cm and not exc 20cm girth in brick walls complete all as specified and as directed. |
| 75 | M&L preparation new or previously untreated steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over and including one coatof red oxide zinc chrome primer complete all as specified anddirected by Engineer-in-Charge. |
| 76 | Complete Removal of existing treatmentfrom old brick/concrete surface on wallsandapplying two coat of Oil bound distemper using roller, brushes including in patches over a coat of alkali resistant primer over a coat of wall care puttycomplete all as specified and as directedby Engineer in charge |
| 77 | M&L for praparing newly plastered surface and applying two coats of dust resistant and anti algal weather proof exterior emulsion paints over a one coat of wall care putty complete all as specified and directed. |
| 78 | M &L for preparation ofnewlyplastered surfaces at walls and applying the 2 coat of Oil bound distemper over 1 coat of primer over a coat of wall care putty Complete all as specified and directed by Engineer-in-charge. |
| 79 | M&L for complete removal of existing treatment on surface of wall including cleaning the surface throughly by using wire brushes and removing used materials from the surface and applying two coats of dust resistant and anti algal weather proof exterior emulsion paints over a one coat of wall care putty complete all as specified and directed. |
| 80 | S&F stainless steel wire cloth ,0.56 mm nominal dia of wire and average with of aperture 1.18 mm and fixed with stainless steel wire staples complete all as specified and directed by Engineer-in charge |
| 81 | Taking down carefully copper/aluminum point wiring (light, fan, socket or power) complete with fittings and fixtures such as switches, ceilingroses, pendants, regulators, socket, lamp holders brackets, bulk head fittings, tube light fittings etc complete and removing allretrieved materials toMES storesfor segregation of serviceable /Unserviceable fitting&fixture and also making good disturbed surfaces of wall, floors etc complete all asspecified and as directed by the Engineer-in-Charge. |
| 82 | M&L concealed point wiring complete with single core FRLS PVC insulated, unsheathed, multi stranded copper conductor cables 1.5 Sqmm 1100 volts grade, with and incl 1.5 Sqmm FRLS PVC insulated, unsheathed, multi stranded copper conductor cables as continuous earth wire connected to metallic bodies of luminaries / fans etc at one end and to common earth dolly at other end, complete wiring drawn through &including PVC Conduit (Concealed in wall/ceiling) of size 20mm dia and above (as per conductor run ) medium grade, ISI marked, incl all accessories & fittings, junction boxes / inspection covers, modular cover plate etc, with and incl concealed MS sunken box of suitable size flush with wall surface, suitable for fixing of Modular type switches / sockets etc, complete all as specified and directed. |
| 83 | All as per item No 82 above, but for one 3 pin socket outlet 5 Amp on same board complete all as specified and as directed by the Engineer-in-Charge. |
| 84 | All as per item No 82 above, but for one 3 pin socket outlet 5 Amp on independent board complete all as specified and as directed by the Engineer-in-Charge. |
| 85 | All as per serial item No 82 here-in-before, but for one socket outlet 15 Amps on independent board with 2.5 Sqmm copper conductor (Multi-stranded) insulated and unsheathed electric cable 1100 volts (ISI Marked) including PVC insulated and unsheathed electric cable 1100 volts 2.5 Sqmm copper stranded conductor as continuous earth wire connected to common dolly complete all as specified and as directed by Engineer-in-Charge. |
| 86 | S&F Modular Switch 1 way 16 Amps, 1 Module size complete all as directed. |
| 87 | S&F Modular Socket 6 A, 2/3, Pin 2 Module size complete all as directed. |
| 88 | S&F Modular Socket 6A/16 A, 5 Pin ,2 Module size complete all as directed. |
| 89 | S&F Modular Switch 1 way 6 Amps, 1 Module size complete all as directed. |
| 90 | Supply and fixing ceiling rose, surface bakelite, 65 x 50 mm, three terminals complete all specified and as directed by the Engineer-in-Charge. |
| 91 | Supply and fixing angular lamp holder, metal cased body of brass with back plate inbatten fittings, including Plastic square box of required size complete all as specified and directed by the Engineer-in-Charge |
| 92 | S&F LED Bulb 9 Watt complete all as specified and directed. |
| 93 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete |
| 94 | Supply and fixing in replacement LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete |
| 95 | S & F in replacement LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size.. |
| 96 | Supply and fixing City-2 globe light including LED bulb 5 watt all as specified and directed by Engr-in-charge. |
| 97 | S&F in replacement of street light fitting bracket, 1.5 mtr long made out of galvanized iron pipe of 40 mm dia size light grade complete with and incl 02 nos MS clamp made of MS flate iron of 50 x 6 mm size with nut, bolts, washer etc with and incl two coats of aluminum paint over a coat of red oxide primer, complete all as directed. |
| 98 | S&F in replacement LED street light luminaire of 35 Watt capacity, made of single piece pressure die-cast aluminium housing with high power LED with lens for proper light distribution luminiaries, IP 66, with toughned glass cover and incl control gear etc, with and incl making all electric connection, complete all as specified and directed by Engineer in charge. |
| 99 | Supply and fixing in replacement sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 12 way with 200 Amps rated bus bar complete complete all as specified andas directed by the Engr-in-Charge. |
| 100 | Supply and fixing in replacement sheet Metal enclosure double shutter type for DB’s 240 Volts Single Pole and Neutral 4 way with 200 Amps rated bus bar complete complete all as specified andas directed by the Engr-in-Charge. |
| 101 | Supply and fixing in replacement SPN 40 amp rating 240V, 10KA \"C\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 102 | Supply and fixing in replacement SP 5 to 32 amp rating 240V, 10KA \"B\" curve miniature circuit breaker (MCB) of Single pole and neutral in the MCB DB complete with connection testing and commissioning. |
| 103 | S&F in replacement sheet metal enclosure DB\"s 415 Volts, IP-42, vertical including MCCB, TP, 63 Amp in4 way VTPN DBs with 200 Amps rated copper bus bar complete all as directed by Engineer-in-charge. |
| 104 | M&L for sub main wiring with 2 run of 6 Sqmm FR, PVC insulated, unsheathed and stranded copper conductor cable with and incl 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable as earth wire connected with thimble from main DB to sub main DB, drawn drawn through & PVC conduit of size 20 mm and aboveincl all conduit accessories & fittings / junction boxes / inspection covers etc, with and incl cutting chasing and making good of disturbed surface of wall / floor/ ceiling etc as original by brick work, plastering, white washing, OBD etc as required, complete all as directed complete incl taking out old wiring and conduitNote : 1. The cost of concealed conduit , taking down old wiring & accessories is deemed to be included in quoted rates.2. The two run of 6 Sqmm wire and one run of 4 Sqmm wire will be measured as one unit. |
| 105 | Earthing complete withgalvanized steel earth plate electrode 60 cmx 60 cm x 6 mm thick buried directlyin ground (earth pit notless than 2.25 metres deep below normal ground level) with top edge of plate not less than 1.5 metres below normal ground level,connecting to theGalvanized ironearth wire 4.0 mm dia by means of bolts, nuts , check nuts and washers of galvanized iron andsteelearth wire protected by provision of GI lightgrade pipe15 mmbore including provision of concrete pitmade from PCC ( 1:2:4) type B-1 (using20 mm graded stone aggregate) with 40mm thick cover of RCC 1:2:4 reinforced with XPM (Weight not less than 4 Kg/Sqm) and frame of angleiron40 x 40 x 6 mm and handle of 6 mmdia MS barmade to shape, GI light grade 20 mmbore pipefor watering perforated atbottom, 1.50metre long placed on top edge of earth plate, common salt &charcoalfilling, withfixing arrangement , funnel, wire mesh and earthwork in hard/dense soil, returning filling in and removal of surplus soilto a distance notexceeding50 metres, all as perelectrical plateNo 3 of SSR 2020 Part-I and connecting toMCBDB’searth test point all as specified or indicated including testing on completion . |
| 106 | Supply and fix exhaust fan made of iron body complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and directed. |
| 107 | Supply and fix electric water heater, storage type steel body with copperinner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc |
| 108 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. |
| 109 | M & L Taking down fan, sealing cable end, dismantling blades and removing fan and blades and deposit in E/M store for declaring BER |
| 110 | S&L XLPE insulated armoured heavy duty electric cable with stranded aluminum conductor 1100 volt gradecross sectional area 10 Sqmm 4 core all as specified and directed |
| 111 | M&L for laying GI tubinglight grade 40 mmdia with all fittings for cable protectionall as specified. |
| 112 | M&L for excavation in trenchesn.exc 1.5 mwidth and n.exc 1.5 m in depthin any type of soil/strata and getting outcompleteall as specified . |
| 113 | Returning, filling inand including spreading over , leveling , wateringand well rammming in layers n.exceeding 25 cmthickall as specified. |
| 114 | Removal of surplus spoilfrom excavatedsiteto a distanceas directed by the Engr in Charge. |
| 115 | M&L for dry sand cusioningfor UG cable in trenches including spreading levellingand hand panningand consolidatingcomplete all as specified. |
| 116 | S&L brick hard burnt sub class\"B\" old patern complete all as specified and directed. |
