Sales : +91-777 804 8217
| Sl. No. | Item Description |
| 1 | Removing of push back seats carefully from Existing place and shifting and loading complete all as specified and directed. |
| 2 | Demolition of cement concrete (unreinforced) in ground floor and pavingsnot otherwise specifically provided for complete all as specified and directed. |
| 3 | Demolition of cement concrete (reinforced) in roofs,floors(otherthan ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified and directed. |
| 4 | M&L for providingPCC 1:2:4 type B1 using 20 mm graded stone aggregate as in coping,bands, plinth course and junction of brick edging and brick lining for drains as in benching other similar works including use and wast of necessary form work ,demolition complete all as specified and directed. |
| 5 | Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlar ficings, dressed stone work and pre-cast concrete articles complete all as specified and directed. |
| 6 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed |
| 7 | M&L for brick work with sub class ‘B’ bricks old size, straight or curved on plan exc 6 M mean radius, built in CM 1:6 complete all as specified & directed but except brick. Note:- Bricks obtained from item No 5 shall be reused after cleaning. |
| 8 | Taking down cement or cement lime plaster of any discription on brick or stone walls/ ceilings etc, including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed. |
| 9 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarsesand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement persquare metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size)in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings overa coat of acrylic polymer complete all as specified (Paymentforproviding grooves shall be made separately), complete all as specified and directed |
| 10 | M&L for 15mm thick ready mix plasterfor External surface is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering on bricks, block, stone walls overa coat of acrylic polymeras well as concrete surfaces. complete all as specified and directed. |
| 11 | M&L for two coat water based premium acrylic smooth exterior paint of approved Colour with silicon additive & Colour stay Technology. Excellent Dit Pick up resistance With low VOC less than 50 gram/ lite as per the LEEDS specifications, Anti Algal Properties in two coats @ 1.79 Itr (undiluted)/ 10 sqm diluted with water as per Manufacturer instructions applied over priming coat with fully automatic airless spray machine of paint application with a flow speed of min 1 Ir per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint complete all as directed.Note:- (a.) The work pertaining to periodical services & Water Proofing shall be executed from authorized applicator through manufacturer of which the materials i.e. Paint, Distemper, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer.(b) Masking of window/doors during spray painting using polythene film will be included.(c)Rate quotated includes work at any height (not.exc 10 mtr) incl necessary scaffolding /Centreing etc and cleaning the waste materials and debris from out of MoD land as directed and complete. |
| 12 | M&L for 15mm thick ready mix plasterfor Internal surface is a specially designed ready to use cement based plaster with high quality polymer additives and well graded sand and fillers which can be used for plastering on bricks, block, stone walls over a coat of single component polymer as well as concrete surfaces. complete all as specified and directed. |
| 13 | M&L for applying two coats of Professional Ultima Stretch painton new decorated wall surfaces over 2 mm thick wall care putty including complete removalof existing treatment with mechanical complete all as specified and directed.Note :- This item will be used specifically for picture screen only. |
| 14 | M&L for applying two coats of oil bound distemper with roller on new decorated wall surfaces over 1 mm thick white putty including complete removalof existing treatment with mechanical complete all as specified and directed. |
| 15 | M&L for applying two coats of oil bound distemper with roller on old decorated wall surfaces over 1 mm thick white putty including complete removalof existing treatment with mechanical complete all as specified and directed. |
| 16 | M & L cutting holes into or through brick wall built in cement mortar superfacial area not exc 150 Sqcmand making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required complete all as specified and directed. |
| 17 | S&F mild steel joist channel angle or tee sections fixed independently with out connecting plates etcof grade Fe-410-W (Gde E-250 quality B) complete all as specified and directed.. |
| 18 | S&F 5.0 cm thick sand stone slabs in sun shades, chajjas, shelves, roof slabs etc n.exc. 2m in length punched dressed on face and along exposed edges, self faced on other side and set and pointed in CM 1:4 complete all as specified and directed. |
| 19 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) complete all as specified and directed. |
| 20 | M&L Glazed ceramic coloured tilesin vertical surfaces of size 350 x 250x 7mm /450mm x 350mm x7mm thick set and jointed in neat cement slurryover10 mm thick rendering in CM 1:4for receiving the tiles complete all as specified complete all as specified. |
| 21 | M&L Non Skid ceramic colouredtiles 7mm to 8mm thick, area of each tile exc 0.11 Sqm but n. exc 0.18 sqm in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 10 mm thick cement mortar (1:6) screed bed for floor finishescomplete all as specified complete all as specified. |
| 22 | M&L 25 mm thickPCC 1:2:4 type B-0 (using 20 mm graded stone aggregate) as in sub base of flooringfinished even and fair without using extra cement complete all as specified & directed. |
| 23 | M&LVirified Ceramic tiles darkshade 10 mm thick (square/rectangular) polished, area of each tiles exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15mm thick screed bed or bedding layer of cement mortar (1:6)complete all as specified and directed. |
| 24 | Dismantling wall and ceiling boards( fibre pulp, insulation etc.)or insulation board /slabs/blanket any thickness including cover fillets height up to 6m complete all as specified and directed. |
| 25 | Providing & fixing false ceiling at all heights with semi perforated 12 mm thick micro tegular edged GRG (Glass Fibre With Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2% humidity resistance of 99%, NRCO 50 to 0.75 as per IS 8225:1987, No n combustible as per BS 476 (part-4)-1920 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-grid of hot dipped galvanized iron section of 0.33 mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000 mm, cross T of size 15 x 32 mm of length 1200 mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanized mild steel items (galvnaizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fastener 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape 24 x 24 x 0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per direction of the Engr in charge. |
| 26 | Providing and fixing in position wall paneling at all heights with 10 mm thick fully perforated Square edgeGRG (Glass Fibre Reinforced Gypsum) panels/tiles of size 595 x 595mm of approved texture, design and patterns BIS-compliant GRG tiles conforming to IS:2095 Part3, 2022 having moisture content less than 2%, humidity resistance of 99%, NRC 0.70 to 0.85 as per IS 8225.1987, Non Combustible as per BS 476 (Part 4)-1970 and light Reflectance of 90% (Minimum), comprising of a frame made from especially fabricated galvanized mild steel sheet 0.50 mm thick pressed section(galvanizing @120 grams per sqm including both sides) i.e. vertical studs of size 48 x 34 x 36 mm are placed at 600mm center to center in a floor and ceiling channel section of size 50 x 32m fixed to the floor and soffit at 600mm centers using 12mm dia, 50mm long wedge type expanded zinc alloy dash fastener with 10mm bolt. This same channel is then to be fixed in horizontal direction at 600mm center to center so as to form a grid of 600mm x 600mm. Glass wool of 50mm thickness is then to be inserted in the slots and finally GRG (Glass Reinforced Gypsum) non combustible panels/tiles are to be screw fixed with self Tapping pan head nickel coated mild steel screws of size 13 x 3.2mm on to this grid leaving an even groove of 1 mm between the panels. The joints between the panels are to be duly jointed and finished using recommended jointing compound and fiber joint tape roll 50mm wide (90 meter) roll and two coats of primer suitable for panelingwith backing of 50mm 1000 GSM thick obsorb wool tested as per fire retradant IS 15061-2002 for excellent results as per manufacturer\"s specification as Per direction of Engineer-in-Charge . |
| 27 | PCC 1:3:6 C-2 (using 40 mm graded crushed stone aggregate) as in plinth protection( 75 mm thick ) laying in alternate ways finished even and smooth without using extra cement incl demolition all as specified. |
| 28 | Dismantling of plain or corrugated steel sheeting,any gauge, thickness, includingNainital orsimilarpattern roofcoverings in roof cobvering complete all as specified and directed. |
| 29 | S & F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 30 | Fixing only in repair Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 31 | S & F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet AZ - 150 thickness of sheet 0.50mm of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 32 | S & F 5mm thick PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to wall complete all as specified and directed. |
| 33 | S & FPVC wall lining consisting of 8-10 mm thick wooden grain printed PVC sheet inclusive of solvent cement and fixing channel feathered at the edgesfor fixing on Solid PVC Wall Lining,Insulated PVC Wall Lining, at site on wall/ceilingas per specification and complete all as specified and directed. |
| 34 | S & F in repairs 15 mm bore chromium plated fancy bib taps, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 35 | S & F factory made uPVC white colour three track three panels sliding window with fly proof SS wire mesh(Two nos glazed & one no wire mesh panels) up to 1.50m height made of (big series) frame 116 x 45mm & sash46 x 62mm both having wall thickness of 2.3 (+ or -)2mm and single glazing bead/double glazing beads of appropriate dimension. (area of window above 1.75Sqm ) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profile duly reinforced with 1.60 thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing bead sand uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated ) touch locks with hook, zinc allo body with single nylon rollers (weightbearing capacity to be 40 Kg) , GI fastener 100 x 8mm size for fixing frame to finished wall and necessary stainless steel screws, etc. profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fiximg hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and incl 4mm thick cooling glass and stainless steel wire mesh of approved qualitycomplete all as specified and directed. |
| 36 | M&L for doors design to fit flush into the wall panel system on both sides and are supplied in different dimensions doors are fabricated from galvanised iron sheets quality powder coated shutter has sheet thickness of 0.80 mm and the frame of 1.2 mm. standered 50 mm panel has frame width of 50 mm and shutter width of 46 mm, doors are with all describe accessories.Note :- 1- automatic( SS hinge, SS D type handles, SS Push plate on push side, standard arm door closure (TS-68) , and view panel alongwith shelf adhesive tape and silicon sealant) 1- door bottom seal at the bottom 2- SS kick plats (double door) 3- flush view / glazing panels on wall designed to fit into wall panel with 6 mm glass are included. |
| 37 | S&F in repairs 10 ltrs capacity PVC flushing cistern low level (white) with inlet ball valve and handle including flush pipe, brackets, rubber bush, washers etc complete all as specified and directed. |
| 38 | S&Fin repair 15 mm bore CP cast copper alloy stop valve / angle valve screweddown, highpressure, withcrutch or butterfly handle, screwed both ends foriron pipe orfor unions and fixed complete all as specified & directed. |
| 39 | S & F in repair 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to wall complete all as specified and directed. |
| 40 | S & F 110 mm bore PVC (SWR) bends with access door of any radius complete all as specified & directed. |
| 41 | S & F 110 mm bore PVC (SWR)(Single T) equal with access door of any radius complete all as specified & directed. |
| 42 | Taking up or down 15mm bore steel tubing and connection complete all as specified and directed. |
| 43 | All as per item No.42above but 20mm bore |
| 44 | Supplying and laying 25 mm outer diameter of CPVC pipes SDR 11 includingCPVC Brass fittings (Brass elbow, Brass Tee, MTBA, FTBA etc), Unions, Ball valves, Flange and tank adaptor or necessaryfittings on walls/ceiling or laying in floors complete all as specified. |
| 45 | Supplying and laying 20 mm outer diameter of CPVC pipes SDR 11 includingCPVC Brass fittings (Brass elbow, Brass Tee, MTBA, FTBA etc), Unions, Ball valves, Flange and tank adaptor or necessaryfittings on walls/ceiling or laying in floors complete all as specified. |
| 46 | Cutting chases, pinning in making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sunshades, shelves, lintels, etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exc 10 cm girth etc brick wall complete all as specified and directed. |
| 47 | S&F in repairs Rotational moulded polyethylene water storage tanks ISI mark engraved with cover(cylindrical vertical with closed threaded top) hoisted and fixed in position including fittings all as specified in SSR Part I (Capacity in litres 1000) Including taking down complete all as specified and directed. |
| 48 | S&F 20mm dia ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe 20 mm dia (minimum weight- 210 gm) complete all as specified and directed. |
| 49 | S&F in repair PVC connection 15mm size with PTMT nuts, 600 mm long complete all as specified and directed |
| 50 | Supply & fix in repairs Vitreous China Squatting pan “ORISSAPATTERN”size- 580x440mm white with integral foot rest complete including provn of lime concrete beddingcomplete all as specified and directed. |
| 51 | S & F Vitreous china wash down water closed pan (Pedestal Pattern ) with \"P\" and \"S\" trapp including connection to trap and cistren and flush pipe (excl flushing cistren)and making good to disturbed surface of floor all fixed as in repairs all as specified and directed. |
| 52 | S & F of plastic WC seat cover and mild steel chromium plated or aluminised hinging device as in repairs etc complete all as specified and directed |
| 53 | S & F in repairs Flushing jet for pedestal pattern WC incl .flexible pipe and brass chromium plated nuts and bolts and water pipe of size 1150 mm long between dia & fixed completed all as specified and directed. |
| 54 | Supply and fix in repairs CP brass central hole basin mixture screwed for 15 mm dia pipes including PVC connection etc complete etc complete all as specified and directed |
| 55 | S&F in repair 15mm bore, brass chromium platedtwo way angle cock screwed down for pipe and fixed complete all as specified and directed. |
| 56 | S&F in repairs oval type wash basin superior quality 537x439 mm size fitted with granite top/baroda green stone over precast RCC slab including waste coupling and suitable size bottle trapcomplete all as specified and directed. |
| 57 | S&F 32 mm dia PVC waste pipe for wash basin /sinks with cupling complete all as specified and directed. |
| 58 | Supply and fixing in repair looking mirror 5.50mm thick of selected quality mounted on PVC frame and back fixed to wall with screw and rawl plugs complete all as specified and directed. |
| 59 | S & Fin repair tubular towel rail 60 cm length of stainless steel20 mm Dia with brackets type fixed with and including chromium plated brass screws and wooden/plastic cleats complete all as specified and directed. |
| 60 | S&Fin repair 150 mm square CP grating with openable flap (Min weight 100 gms) complete all as spd and directed. |
| 61 | S&F sheet glass shelf assembly consisting of 5.50mm thick sheet glass 12 cm wide with chromium plated bracket guard andrailing 60cm long complete all as specifiedand directed |
| 62 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) n. exc 1.5 Sqm each complete all as specified and directed. |
| 63 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm but not exc 4 sqm each complete all as specified and directed. |
| 64 | Taking down shutter of any description exc 1 Sqm and not exc 2 Sqm each complete all as specified and directed. |
| 65 | Refixing the shutters of any description exc 1.00 Sqm but not exc. 2 Sqm each in the same opening or in other opening complete all as specified and directed. |
| 66 | Supply & fixfactory made solid panel PVC door shutter 30mm thick (style) consisting of frame, made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC , ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for to rail & bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed to getter with solvent cement, supplying & fixing in the frame at site as per specification & drawing for Item No. 08080 on page No 174 of SSR 2020 (Part-II) |
| 67 | S & F Solid PVC door frame for PVC doors, Kitchen cabinet of size 50mm x 47mm made out of 5mm PVC sheet reinforced with MS square tube, as shown on drawings as per manufacturers specification complete all as specified and directed. |
| 68 | S & F PVC door( back side) stopper 75mm long complete all as spd and directed. |
| 69 | S&F 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and directed. |
| 70 | S&F 250 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts complete all as specified and directed. |
| 71 | S&F 100 mm long medium weight, cold rolled mild steel Butt hinges complete all as specified and directed. |
| 72 | S&F 150 mm long aluminium alloy handles, fabricated type, anodised complete all as specified and directed. |
| 73 | S & F Mild steel Angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps, plain angle cleats for securing purlins and similar small articles confirming to Fe-410-w (Gde-E250) quality B complete all as specified and directed. |
| 74 | S&F in repair factory made 18mm thick solid WPC (wood polymer composite) board of density 650kg/cum of one side prelaminated/rigidlam with any colourn and other sidebalancing lamination, as in cupboards/kitchen/ cabinet shutter/ drawers etc fixed with screws, sovent cement, adhesive complete all as specified and directed. |
| 75 | S & F mild steel 40mm dia decorative knob for kitchen cup board complete all as spd and directed |
| 76 | S & F Brass magnet catcher suitable for CB/cabinet shutter complete all as spd and directed. |
| 77 | S & F powder coated Anodised aluminium ventilator framefixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified |
| 78 | S & F Stainless steel wire cloth, 0.71 mm nominal dia of wirefixed with tinned tacks, of 20mm meshof stainless steel wire staples complete all as specified and directed |
| 79 | S&F in repairs mild steel PVC coated drapery rods, 25mm internal diameter including decoratine type brackets and PVC curtain rings 8 Nos per RM including fixing arrangement with drilling holes in walls, brackets etc complete all as specified and directed. |
| 80 | M&L in repairsBaroda green marble makrana Adanga stone 18 to 20 mm thick in steps, pillars, wndow cills, pillars, window cills, cooking platforms and like laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed. |
| 81 | S&F 5.0 mm thick Figured glass, pin headed type and glazing with oil putty in squares not exceeding 0.5 Sq. M in each pane complete all as specified and directed. |
| 82 | S & F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both end for iron pipe and fixed complete all as spd and directed. |
| 83 | M&L for anti termite treatment of soil under existing floors using emulsion antitermite@ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes and making good using with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and directed. |
| 84 | M&L for providing and injecting chemical emulsion for post constructional antitermite treatment along the internal / external wall and wooden cup board, shelves etc wooden area should drill by 6 mm, bit, gap between two holes is 30 cm to 45 cm internal / external wall skirting level should drill by 8/10/12 mm bit, grap between two holes is 45 cm to 60 cm, filing the holes by 100 ml to 150 ml dilution of chemical emulsion in two stage . In 3rd stage close the holes by white cement and finishes with existing surfaces. The ATT chemical should be odorless and mixed formulation should be injected at the rate of 5 ltr per sqm. The ATT chemical should contains.(i) Byfinthrin 20% EC (smell Chemical)(ii) CHLORPYRIPHOS 20% EC (Smell Chemical)(iii) lmidacloprid 30.5 % (Odor less Chemical)The work pertaining to ATT shall be executed from authorized applicator through manufacturer of which the materials is proposed to be used by the contractor and approved by GE. 02 year guarantee of ATT work will be admissible after date of completion and 10% amount will be reserve against ATT work after date of completion for the 02 year. |
| 85 | M & L for Brushbond RFX Elastomeric polymer modified cemtentitious waterproofing coating used for waterproofing of extg and new naked bricks surface complete all as spd and directed. |
| 86 | Excavation in trenches not exceeding 1.5 M wide and not exceeding 1.5 M in depth for foundation, manholes, etc n.exc 10 Sqm plan and getting out in soft/loose soil complete all as specified and directed. |
| 87 | Returning, filling in, including spreading, leveling, watering and well ramming in layer n.exc 25 cm thick in each layer all as specified and directed. |
| 88 | Removing of surplus soil excavated materials to a distance exceeding 50 M but not exc 100M and depositing where directed at a level not exceeding 1.5 M above the starting point complete all as specified and directed. |
| 89 | Demolition and breaking up drain pipes (salt glazed ware, AC or reinforced concrete) set in cement mortar including concrete bedding and haunching complete all as specified and directed for 150mm bore of pipe |
| 90 | M&L for 150 mm dia Reinforced concretepipes,class NP2, laidand jointed completewith collarscomplete all as specified and directed. |
| 91 | M&L PCC 1:4:8 type D-2, using 40mm graded stone aggregate as in bed of drain pipe including packing under and haunching against the sides of pipes after they are laid and tested for the 150mm dia of pipe complete all as specified and directed |
| 92 | M&L for providing pre-cast reinforcementcement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in cover (for manholes and drains) including necessary form work set in CM 1:6 with and including demolition complete all as specified and directed. (Note :- Reinforcement shall be measured and paid separately) |
| 93 | M&L for providingcement concrete 1:4:8 type D2 using 40 mm graded stone aggregate as in Cement concretein foundations, filling and massconcrete complete all as specified and directed |
| 94 | M&L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with cli complete all as specified and directed. |
| 95 | Providing Acrylic plastic number plate of size 500mmX 300mm X 3mm and writing letters of height 10 to 15 cm in any style (bold/italic) and fixed to wall with screws complete all as specified & directed. |
| 96 | M&L in repair Granite (of any type) tiles 20mmthick machine cut, bedded andjointed with grey cement slurryand pointed with white cementwith admixture of pigment to match the shade of granite stone including 20 mm thick cement mortar (1:6) screed bed for floor finishes & grinding and polishing complete all as specified and directed. |
| 97 | M&L for factory made Pressed steel frames 105 x 60 x 1.25mm thick for doors with one or more rebates including necessary fixing lugs, hinges, lock, strike plate etc complete including PCC (1:3:6) type C-0 (using 12.5 mm graded stone aggregate) as in filling hollow portion of frame complete all as specified and directed. |
| 98 | S&F Factory made flush shutter 35 mm thick solid core construction with block board core and plywood face panels commercial type complete all as specified and directed. |
| 99 | M&L for applying two coats of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width or girth including preparation of new or previously untreated wood surfaces complete all as specified and directed. |
| 100 | M&L for applying two coats of synthetic enamel paintonnew steel surface 10 cm width or girth including preparation ofsurfaces complete all as specified and directed. |
| 101 | M&L for applying two coats of synthetic enamel paintonold steel surface 10 cm width or girth including preparation of surfaces complete all as specified and directed. |
| 102 | S&F Aluminium alloy, anodised, 300 mm sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding boltscomplete all as specified and directed. |
| 103 | Closing bolt holes etc in old corrugated sheets by sealing with one bitumen and one curved GI washer on either side and 6 MM GI bolts and nuts,all set in stiff white lead all as specefied and directed. |
| 104 | fixing of push back seats carefully with nuts and bolts with suitable accessories complete all as specified and directed. |
| 105 | Taking down carefully existing unserviceable copper / aluminum point wiring of any description & in any position with and ncluding taking out existing unserviceable conduits or battens of any descriptionwith sunken boxes/junction boxesand all fitting, accessories & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc but excluding tube light fittings and making good the disturbed surface of walls, floors, ceiling etc to match with the existing surfaces complete all as specified and directed. |
| 106 | M&L point wiring with 1.5 sqmm multi stranded copper conductor 1100 voltsgrade FRLSH PVC insulated unsheathed cable with proper colour codingdrawn in including PVC concealed conduit not less than 20 mm dia with all accessoriesandFRLSH PVC insulated 1.5 Sqmm multi standard unsheathed copper wire for continues earth,including cutting and chasing of wall surface for laying PVC conduit and modular sunken box of suitable module as per site requirement not less than 1.6mm thick and connecting earth and making good to the disturbed surfaceof wall/floor and matching with existing specifications. Connections of cable with MCB\"s or bus bar shall be done through proper size copper/brassthimbles.Note:- Conduit shall be fixed on surfaceof roof with necessary saddles where concealing of conduitis not feasible at no extra cost for the following :- (a) One light /fan point controlled by one switch |
| 107 | (b) One 5 pin socket outlet5 Amps on same board |
| 108 | (c) One 5 pin socket outlet 5 Amps on independent board |
| 109 | All as per item No 106 here in before but with cable size 4 Sq mm for one 5 pin 15/16 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 4 sqmm all as specified and directed by Engr-in-Charge. |
| 110 | Supply and fixing modular switch single pole, one way 6 Amps 1 module, complete all as specified and directed. |
| 111 | Supply and fixing modular switch16 Amps single pole one way, one module, complete all as specified and directed. |
| 112 | Supply and fixing modular socket outlet2/3 pin 6 Amps combined 2 module, complete all as specified and directed. |
| 113 | Supply and fixing modular socketmultipurpose 3/5 pin 6/16 Amps combined 2 module, complete all as specified and directed. |
| 114 | Supplying & fixing for ceiling rose PVC Polycarbonate isolated body 62.5 x 25 mm, three terminals, complete all as specified & directed. |
| 115 | Supply and fixing modular cover plate with metal frame (inner and outer) 2 module for mounting switch and sockets all as specified and as directed. |
| 116 | Supply and fixing modular cover plate with metal frame (inner and outer) 3 module for mounting switch and sockets all as specified and as directed. |
| 117 | Supply and fixing modular cover plate with metal frame (inner and outer) 8 module for mounting switch and sockets all as specified and as directed. |
| 118 | Supply and fixingblank spacer plate for single module complete all as specified and directed. |
| 119 | S&F in repair Inverter LED batten with square profile and polycarbonate channel. Lithium Ion battery with charging time 8hours-10 hours and back up time upto 4 hours, high optically efficient polycarbonate diffuser, in built electronic driver duly wired upto terminal block, power consumption <20W (Approx 4 feet 20W) luminaire complete all as specified and directed. |
| 120 | Supply & Fixing LED Recess Down Light with smart Sensor, 15 watts with inbuilt Microwave motion Technology for providing an energy efficient solution with auto dimming option from 100% to 25% of the rated wattage on sensing of movement and connecting up with 2/3 core flexible copper conductor cable of suitable size from light source complete all as specified and directed. |
| 121 | Supply and fixing in repair LED luminaire 595 mm x 595 mm, 36 watt, 220 V AC, 6500 K surface/ recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver and connecting the same to electric source with & using PVC sheathed and insulated three core copper conductor cable of size 0.75 Sqmm and fixing arrangements for fixing the light fitting completeall as specified and directed. |
| 122 | S & F LED Square Step light 3W construction in die-casted aluminum powder coated, integrated LED ensures long-lasting and energy efficient with IP65 Protected including fix properly concealed in each step complete all as specified and directed. |
| 123 | S & F LED Exit Signage light 3W in CRCA powder coated with clear acrylic, screen printed/Etching/Deep engraving display complete all as specified and directed. |
| 124 | S&F LED 10 watts bollard Mushroom shape warm white with robust IP 65 rating design, Height-0.80m and efficient light distribution including light fitting fixing and making PCC block foundation of size 250x250x250mm with concrete cement and connecting the fittings on PCC foundation block with suitable size of fastner complete all as specified and directed. Note:-The period of defects liability shall be 02 Years from the date of installation of Bollard light complete all as specified and directed. |
| 125 | Supply and fix in repairpost top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified and directed. |
| 126 | M&L for Circuit/Submain Wiring with two single core FRLSH PVC insulated unsheathed multistranded flexible copper conductor cable of size 2x1.5 sqmm and one single core PVC insulated multistranded unsheathed flexible copper conductor 1x1.5 sqmm size (green colour) cable as earthing lead connecting to main earthing dolly drawn in PVC Conduit heavy grade not less 20mm dia including dismantling of old unsv submain wiring including fittings and fixtures complete all as specified and directed by Engineer-in-charge.Note: (i) The work should be executed at the top of appx 25m height of building. (ii) Two run of single core PVC cable with one run ofearth conductor and one run conduit /batten shall be measured as one unit.) |
| 127 | M&L for replacement of sub main wiring using two 2x6 sqmm single corePVC insulated, unsheathed stranded copper conductor cable of voltage rating upto and including 1100 Volts drawn in and including concealed/surface, PVC conduit (Medium grade) as required diawith standard accessories along-with one run of PVC(green colour) insulated , unsheathed, stranded copper conductorof size 1x 6 sqmmas earth continuity conductor connected to earth dollyincluding taking down old unsv submain wiring complete all as specified and directed. (NOTE : Two run of single core PVC cable with one run ofearth conductor and conduit /batten shall be measured as one unit.) |
| 128 | Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with appropriate size bus bar and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated complete with out MCBand with enclo-sure blank plates for unused way suitable for 12 way ISI marked, including taking down old unsv MCB DB and MCBs complete all as specified and directed. |
| 129 | Supply and fixing MCB DB single pole with neutral sheet metal enclosure double door type, 240Volts AC, with appropriate size bus bar and common neutral link all en-closed in standard steel sheet flush mounting type factory fab-ricated, powder coated, IP 43 complete with out MCBand with enclo-sure blank plates for unused way suitable for 4 way ISI marked, including taking down old unsv MCB DB and MCBs complete all as specified and directed. |
| 130 | Supply and fixing in repair Single pole and neutral modular type enclosure with a two pin and earth plug and socket complete with one single pole MCB of capacity 20 Amp, complete all as specified and directed. |
| 131 | Supply and fixing in repair MCB SP 6 to 32 Amp (\"C\" curve)having short circuit rating 10KA, 240 voltscomplete with connection testing and commissioning. Complete all as specified and directed. |
| 132 | Supply and fixing in repair MCB SPN 40 to 63 Amp (\"C\" curve)having short circuit rating 10KA, 240 voltscomplete with connection testing and commissioning. Complete all as specified and directed. |
| 133 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed. |
| 134 | S & F Wall mounting fan, electric driven single phase 230 volts, oscillating type, 400 mm sweep, high quality ABS base with high speed motor and balanced blades with three leafed and 3 core copper cable of suitable size complete all as specified and directed. |
| 135 | Supply and fixing GI Hot Dip/powder coated perforated type cable tray of size 100mm in width, 50mm in height made of 18 SWG (Approx .20mm) including all necessary fittings such as Tee, Cross, Horizontal/Vertical Bend, coupler plates, \"C\" Channel, \"Z\" Section, Rod, Anchor Fastner, Cable tie etc complete all as specified and directed. Note: (i) The work should be executed at the top of appx 25m height of building outer walls. |
| 136 | Supply and fix ON LOAD change over switch 415V in sheet metal enclosures 4 pole of capacity 250 Amps including fixing on walls, complete all as specified and directed. |
| 137 | M&L in replacement for earthing complete with galvanized earth plate electrode 600 x 600 x6mm thick burried directly in ground vertically to a depth not less than 2.25 M below normal ground level ) with top edge of the plate not less than 1.50 M below normal ground level , connected to and including galvanized steel wire 4mm dia as earth lead soldered and rivetedto earth plate by means of nuts, bolts, check nuts & washers, of galvanizediron or steelwith connected to test point and testing on completion including 15mm GI light grade pipe for earth leadprotection from earth point to earth plate, including provnadequate quantity of charcoal dust mixed with35 % common salt to a packed thickness of not less than 15 cm in alternate layers of charcoal and salt on all sides of earth platewith 20mm bore medium grade GI Pipe for watering,GI check nut, funnel and wire meshwith and includingall necessary excavation& earth work in soft/loose soil, returning filling in, removal of surplus soil to a distance 50 metre,,PCC 1:3:6 type C-1 as in earth pit, 40 mm thick RCC cover using cement concrete 1:2:4 type B-1 reinforced with & including 8 mm dia mild steel TMT bar @ 100 mm c/c Both way with suitable handle for lifting arrangement & including form work complete all as specified and shown in electrical plate No 3 of MES SSR Part I 2009 and as directed. NOTES:-(i) On testing, after completion of Job, if desired earth resistance is not obtained, the earthing shall be redone at without any extra cost by contractor. |
| 138 | Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated sit-uation for loop earthing etc. as required 4 mm dia galvanised iron or steel wire complete all as specified and directed. |
| SR No | FileName | File Description |
| 1 | Click here to download tender document | Tender Documents |
| 2 | Click here to download tender document | Tender Documents |
| 3 | Click here to download tender document | Tender Documents |
| 4 | Click here to download tender document | Tender Documents |
| 5 | Click here to download tender document | Tender Documents |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
