|
| 1 | Supplying roofing compound and bitumin washers for closing leakages from the bolt holes of AC sheet/GI sheet roofing and ridges,replacing damaged bitumin washers pasting and covering with roofing compound,tightening J bolts, nuts etc complete.(rate shall be inclusiveof cost of bitumin washers, GI washers, Roofing compound and labour charges and charges for tools and plants etc.) The work is to be carried out at roof of godown at a height upto 12 metres from ground level after observing all safety norms. |
| 2 | Supplying and pasting tarfelt sheet one layer of approved brand (STP or equivalant ) over broken AC sheet roofs/GI sheets, ridges,gable wall joints,valley gutters,sides of parapet etc after cleaning the surface to which tarfelt is to be pasted and applying bitumastic roofing compound (Shalibond CS or equivalant).all labour charges complete as directed by engineer in charge. |
| 3 | Cleaning Verandah eave gutter and disposal of rubbish to the dumping ground including tightening clamps etc complete. |
| 4 | Cleaning saucer drains including removal of silt and rubbish cutting and remoing grass and other vegetation from the sides of drains and disposal of rubbish within a distance of 150 mts.etc.complete. |
| 5 | Cleaning masonry drains of width 25 cms to 60 cms and depth up to 60 cms, including removal of silt and rubbish, cutting and removing grass and other vegetation from the sides of drains and disposal of rubbish within a distance of 150 mts.etc.complete. |
| 6 | Cleaning storm water drains of width 45 cms to 60 cms and depth up to 60 cms, including removal of silt and rubbish, cutting and removing grass and other vegetation from the sides of drains and disposal of rubbish within a distance of 150 mts.etc.complete. |
| 7 | Dismantling roofing including ridges, hips, valleys and gutters etc.,and stacking the material within 50 metres lead of :Asbestos sheet( Item No 15.28.2 of DSR 2023) |
| 8 | Providing reinforced by organic fibres and/or inorganic synthetic fibres cement 6 mm thick corrugated sheets (as per IS: 14871) roofing up to any pitch and fixing with polymer coated J, or L hooks,bolts and nuts 8 mm dia. G.I. plain and bitumen washers or with self drilling fastener and EPDM washers etc. complete (excluding the cost of purlins, rafters and trusses), including cutting sheets to size and shape wherever required.(Item no 12.8 of DSR 2023) |
| 9 | Reparing/Servicing rolling shutters such as removal of top covers tightening/ loosening the springs adjusting the dislocation of parts if any and applying greese to the springs side guides ( 0.40 kg greese/ shutter) after cleaning and refixing the cover in position etc as directed by engineer in charge. |
| 10 | Reparing/Servicing sliding doors such as adjusting top and bottom rails and pullies0.25 kg greese/shutter) after cleaning the surface etc complete as directed by engineer in charge. |
| 11 | Dewatering the well using pump set or manually removing silt , clay etc from the bottom of the well, cleaning the walls of the well, disposal of all debris etc. complete as directed by the Engineer-in-charge (the rate shall include all labour, hire charges of the pump equipment, scaffolding etc). |
| 12 | Cleaning of under ground sump, Over Head R.C.C. Tank (independent staging) including disposal of slit and rubbish, all as per direction of Engineer-in-Charge. The cleaning shall consist following operations:-i) Tank shall be emptied of water by pumping & bottom shall be cleaned of silt and other deposits.(ii) Entire surface area of the sump shall then scrubbed thoroughly with wire brush etc. and pressure washed with water. (iii) Chlorination of RCC internal surface by liquid chlorine as per the direction of Engineer-in-Charge. (Analysed based on Item No 14.78 of DSR 2023) |
| 13 | Applying waterproofing to concrete roof surfaces using acrylic based waterproofing compounds such as tapecrete or any approved make including preparation of surface by cleaning all dust/ deposits, and applying the mixture in the ratio of 100 kg. cement : 50 kg of TAPECRETE. (The mix has to be prepared without any air bubbles.), two or more coats recommended, including curing the coating, complete as directed by the Engineer-in-charge. (analysed item) |
| 14 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) Item No:4.1.3 as per DSR 2023 |
| 15 | 52 mm thick cement concrete flooring with concrete hardener topping, under layer 40 mm thick cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1:2 (1 cement hardener mix : 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer\"sspecifications. This includes cost of cement slurry, but excluding the costof nosing of steps etc. complete. Item No:11.4 as per DSR 2023 |
| 16 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - 1:4:8 (1 Cement : 4 coarse sand derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) (Item No 4.1.8 of DSR 2023) |
| 17 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-Charge.With cement mortar 1:4 (1cement:4 fine sand) (item No.14.1.1 of DSR 2023) |
| 18 | Dismantling doors, windows and clerestory windows (steel or wood)shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : Of area 3 sq. metres and below( Item 15.12.1 of DSR 2023) |
| 19 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P.brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)(Item No.21.1.1.2 of DSR 2023) |
| 20 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)(Item No.21.3.1 of DSR 2023) |
| 21 | Renewing glass panes, with putty and nails wherever necessary includingracking out the old putty:Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) (Item No.14.5.1 of DSR 2023) |
| 22 | Deduct cost of salvagable materials received from the work of dismantling work on as is where is condition includingremoving from the site - Wooden windows |
| 23 | Fencing with angle iron post placed at required distance embedded in cement concrete blocks, every 15th post, last but one end post and corner post shall be strutted on both sides and end post on one side only and provided with horizontal lines and two diagonals interwoven with horizontal wires, of barbed wire weighing 9.38 kg per 100 m (minimum), between the two posts fitted and fixed with G.I. staples, turn buckles etc. complete. (Cost of posts, struts, earth work and concrete work to be paid for separately). Payment to be made per metre cost of total length of barbed wire used. With G.I. barbed wire(16.18.1) |
| 24 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete (Item No.10.1 of DSR 2023) |
| 25 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) (Item No 15.2.1 of DSR 2023) |
| 26 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. Nominal concrete 1:4:8 or leaner mix (i/c equivalent design mix)(Item No 15.2.2 of DSR 2023) |
| 27 | Supplying and filling in plinth with sand under floors, including watering,ramming, consolidating and dressing complete.(Item no 2.27 of DSR 2023) |
| 28 | Providing and fixing glass strips in joints of terrazo/ cement concrete floors.40 mm wide and 4 mm thick ( Item No.11.13.1 of DSR 2023) |
| 29 | Brick work with common burnt clay modular bricks of class designation7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)(Item No.6.2.1 of DSR 2023) |
| 30 | 12 mm cement plaster of mix :1:4 (1 cement: 4 fine sand)(Item no.13.1.1 of DSR 2023) |
| 31 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubes(Item No.10.16.1 of DSR 2023) |
| 32 | Painting with synthetic enamel paint of approved brand and manufactureof required colour to give an even shade :Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture (Item No.13.62.1 of DSR 2023) |
| 33 | Providing and fixing colour precoated galvanised iron plain profile sheets 0.50 mm (+ 0.05 %), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Analysed based on Item no. 12.50 of DAR 2023) |
| 34 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment,only the actual area on the external face of the curtain wall with Aluminum Composite PanelCladding (including width of groove) shall be measured in sqm. up to two decimal places. |
| 35 | Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved.(Item no.15.60 of DSR 2023) |
| 36 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil. (Item No.2.8.1 of DSR 2023) |
| 37 | Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand) with available Hard stones obtained from collapsed buffer)(Analysed based on Item No.7.1.1) |
| 38 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.(Item No.2.25 of DSR 2023) |
| 39 | Centering and shuttering including strutting, propping etc. and removal of form for Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.(Item No.5.9.2 of DSR 2023) |
| 40 | Providing and fixing Anjili wooden reapers to the buffer stoppers .Approved observed data Price LSGD (Similar to 50.9.1.1) |
| 41 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead 15.23.1 For thickness of tiles 10 mm to 25 mm |
| 42 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand),jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600x600 mm (DSR 2023 Item No. 11.41.2) |
| 43 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.(8.31) |
| 44 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Wash basin size 630x450 mm with a single 15 mm C.P. brass pillar tap (Item No 17.7.2 of DSR 2023) |
| 45 | Providing and fixing rod and clamp for hanging door nets in godown (Local Market Rate) |
| 46 | Painting standard stack plan inside the godownwith approved quality Floor paint after marking the size and painting Two coat paint measuring 100 mm wide around the periphery of stack etc. completeas per direction of Engineer in charge. |
| 47 | Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350 mm or 340x410x265 mm sizes respectively (item No.17.23 of DSR 2023) |
| 48 | Providing and fixing water closet squatting pan (IndiantypeW.C.pan) with 100mm sand cast IronPor Strap,10 litre low level white P.V.C.flushing cistern, including flushpipe, with manuallycontrolled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors whereverrequired:White Vitreous china Orissa patternW.C.pan of size 580x440mm with integral type foot rests(item No.17.1.1 of DSR 2023) |
| 49 | Deduct cost of salvagable materials received from the work of dismantling work on as is where is condition includingremoving from the site - angles and fencing [Rate as per observed data] |
| 50 | Supplying labour for routine works including all incidentals and services as per the direction of engineer in charge( Fitter Grade-1/carpentar grade-1 / plumber/ welder) |
| 51 | Supplying labour for routine works including all incidentals and services as per the direction of engineer in charge( Beldar) |
