|
| 1 | M&L for machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing laid over and including screed bed or bedding layer of 20 mm thick in CM 1:6 complete all as specified and as directed. |
| 2 | All as per Item No 1above but as in skirting, set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over & including 20 mm thick plaster in CM 1:4 on stone masonry surface etc. complete all as specified and directed. |
| 3 | M&L for 20mm thick rendering as in setting coat in CM 1:4 on stone masonry surface, surface finished even and smooth (internal surface) complete all as specified and directed. |
| 4 | M&L for 20mm thick rendering as in setting coat in CM 1:6 on stone masonry surface, surface finished even and smooth external surface) complete all as specified and directed. |
| 5 | M&L for brick work with fly ash bricks, straight or curved on plan exc. 6m mean radius, built in CM 1:6 complete all as specifed and as directed. |
| 6 | M&L for prepration of newly plastered wall surface and applying two coats of oil bound distemper over and including 3mm thick wall care putty complete all as specified and as directed. |
| 7 | M&L for precast cement concrete block masonry with solid blocks exc. 10 cm in width and setting in cement mortar 1:6 using PCC 1:3:6 type C-1 precast cement concrete blocks, complete all as specified and directed. |
| 8 | Demolition of cement concrete in ground floor and pavings n. exc. 15 cm thickness (below or above GL), complete all as specified and directed. |
| 9 | S&F in repairs 15mm bore bib taps, brass chromium plated, cast copper alloy fancy type handle screwed down, screwed for iron pipes complete all as specified and directed. |
| 10 | S&F in repairs 15 mm stop valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for unioncomplete all as specified and directed. |
| 11 | Dismantling of single layer Mangalore pattern tiles or similar tiles in roofing etc complete all as specified and directed |
| 12 | Dismantling battens for tiles shingles etc of any size including tiling fillets exc. 15 cm spacing etc complete all as specified and as directed |
| 13 | Dismantlingfillets, rails, posts, rafters, purlins, etc. under 40 sq. cm in section (unframed work) complete all as specified and directed. |
| 14 | Dismantling timber scantling in any position (unframed wok) exc. 40 Sqcm in section complete all as specified and directed. |
| 15 | M&L PCC 1:4:8 type D-2 as in foundations, filling in mass concrete etc. complete all as specified and directed |
| 16 | M&L for 25mm thick PCC 1:2:4 type B-0 as in floor, finished the surfaces fair & even to receive floor finishes, complete all as specified and directed. |
| 17 | M&L for PCC 1:3:6 type C-2, (using 40mm graded stone aggregate) of75mm thick, laid in alternate bays as in path and plinth protection including finishing the surfaces even andsmooth using extra cement, complete all as specified and directed |
| 18 | M&L for bitumastic gola, with 80/25 bitumen and coarse sand mixture. 1:3 by weight, complete all as specified and directed. |
| 19 | Supply only chain link MS galvanised fencing any size or type complete all as specified and as directed. |
| 20 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire, complete all as specified and directed. |
| 21 | Supply & Fixing MS work inposts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets / round bars (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and as directed. |
| 22 | S & F of steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded etc. complete all as specified and directed. |
| 23 | S & F of steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded etc. complete all as specified and directed |
| 24 | M&L for 150mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even, complete all as specified and directed. |
| 25 | M&L for 75mm thick PCC 1:4:8 type D-2 (Using 40mm graded stone aggregate) as in sub base of floor, finished the surfaces fair & even, complete all as specified and directed. |
| 26 | M&L for PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in foundation filling / mass concrete / base of fencing posts including necessary form work (if required), complete all as specified and directed. |
| 27 | M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in roof kerbs or mud stops etc., rounded or chamfered on edges etc., complete all as specified and directed. |
| 28 | M&L for rendering 10 mm thick onfair faces of brick orstone or concrete surfaces in cement mortar 1:6withfinished even and smooth without using extra cement including taking down of old existing cement plaster, complete all as specified and directed |
| 29 | M&L for rendering 10 mm thick onfair faces of brick orconcrete surfaces in cement mortar 1:4withfinished even and smooth with using extra cement complete all as specified and directed |
| 30 | M&L for applying two coats cement base paint (snowcem) over a coat of chalk whitening on new walls surfaces, including preparation of surface of walls, complete all as specified and directed. |
| 31 | M&L for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description exc. 10 cm width or girth, includingpreparation of new steel surfaces, complete all as specified and directed. |
| 32 | M&L for two coats of synthetic enamel paint over a coat of pink primer on new steel surface of any description exc. 10 cm width or girth, includingpreparation of new steel surfaces, complete all as specified and directed. |
| 33 | S&F of 4mm thick figured glass, pin head type and glazing with oil putty in squares n. exc. 0.5 Sqm in each pane complete all as specified and as directed. |
| 34 | Excavation in trenches, not exc 1.5 m wide and not exc 1.5 m in depth; for foundation etc. and getting out in any type of soil, complete all as specified and directed. |
| 35 | Excavation in hard / dense soil for post holes (or similar holes) each n.exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth arround, in layers n. exc. 25 cm, watering, and removing surplus soil to a distance n. exc. 50m and making good disturbed surfaces, complete all as specified and directed. |
| 36 | Returning, filling in any type of soil, including spreading, levelling, watering and well ramming in layers n.exc 25cm thick, complete all as specified and directed. |
| 37 | Removing excavated materials (Soil) n. exc. 50m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified |
| 38 | Removing excavated materials (Soil) exc. 250m but n. exc. 500m and depositing where directed at a level n. exc. 1.50m above the starting point, complete all as specified |
| 39 | Demolition of cement concrete of any description in any position in sunken floor and roof slab padding & like etc including removal of debris & dismantled materials and rubbish off the premises and dumping ground will be sorted out by contractor at their own arrangement complete all as specified and as directed. |
| 40 | Removing building materials etc. (other than spoil payable under items 03028 to 03031 in Section-Per 3-Earthwork) to a distance of n.exc 500 m or under, beyond the lead included in the rates, including loading, unloading and stacking at the destination, complete all as specified and directed. |
| 41 | M&L for providing of PCC padding in 1:2:4 type B-0 of uniform thickness of 50mm in two layers of 25mm thickness with chicken wire mess 0.91 mm dia, laid between two layers and of 12x12mm aperture. Top surfaces of PCC padding shall be finished even and smooth without using extra cement but with false groove at 300x330 mm centre to centre and to be laid in slope, mixed with liquid water proofing chemical as per manufacturer’s instructions, complete all as specified and directed.Note:- Water proofing chemical shall be measured and paid separately |
| 42 | M&L for water proofing treatment to RCC roof slab, walls, chhajjas etc, shall be carried out as specified below including removing of existing bituminous tarfelt including cement screed bed and clean the surface with wire brush and washing with water to achieve the original surface of slab including removing of bitumen primer applied on slab complete all as specified and as directed by Engineer-in-Charge:-(a) M&L for rendering 10mm thick cement plaster in CM (1:4) complete all as directed by Engr-in-Charge (b) M&L for preparing plastered surfaces of roof slab, walls, chhajjas etc, by brooming with broom sweeping free from dirt dust etc & evenly applying a coat of ShaliTex primer (solvent based bituminous primer) conforms to IS: 3384-1986 coat of ShaliTex primer @ 0.3 Kg/Sqm shall be applied on the prepared and cleaned roof surface and parapet and ensure that not to apply when temperature is less than 5°C or during foggy period. Primer shall be allowed to dry for overnight. |
| 43 | Ser. Item No. 42.00 Contd...(c) M&L for providing and laying APP (Atactic Polypropylene polymer) 3mm thick Super Thermolay Spun bonded non woven polyester reinforced APP modified water proofing membrane, black finished reinforced with non woven polyester matt weight not less than 3.5 Kg/Sqm manufactured by STP Ltd. The laying of membrane with a 75 mm longitudinal and 100mm transverse direction overlap shall be provided and laid using LPG torch and sealing all joints etc. complete (d) Finally applying a coat of Super Silver Shield confirmed to IS: solar reflective bituminous aluminium paint @ 0.15 Itr/Sqm on the top of membrane surfaces complete all as specified & as directed by Engr-in-Charge.Note:- (i) Work shall be carried out by STP Ltd (OEM) / fosroc / Pidilite / Suprimo (OEM) respective applicator & work should be able to furnish stage wise on site technical reports from concerned company technologist during currency of work and entire completion of work.ii) Contractor shall submit 10 year OEM guarantee for water proof treatment. |
| 44 | Supply only liquid water proofing chemical, complete all as specified and directed. |
| 45 | M&L for cutting out cracks to V-section in existing roofs or terracing, cleaningout, wetting, grouting with cement and sand slurry 1:3, complete all as specified and as directed |
| 46 | Removing of existing water tank of capacity 500,1000 or 2000 Ltr setting aside (or lowering if required) Each for repair, cleaning etc and reconnecting & re-fixing in position after carrying out necessary roof treatment with and including necessary fittings and GI Pipes if required at site, complete all as directed by Engr-in-charge.Note:-Necessary by pass arrangements for water supply has to be done by the contractor till completion of roof work at his own cost and no extra payment on this account shall be admissible. |
| 47 | Dismanling floor, hearth or wall tiling including cement mortar bedding & backing coat and removing of debries and demolished materials and rubbish off the premises complete all as specified and as directed. |
| 48 | M&L for coloured glazed ceramic designed tiles in vertical surface 600x 300x 7-8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 10mm thick backing coat in CM 1:4 with and including triangular filleting in CM 1:4 on top edges complete all as specified and as directed. |
| 49 | M&L for coloured glazed ceramic tiles as on vertical surface of 300x 200x 7mm thick size, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over & including 20 mm thick plaster as in setting coat in CM 1:4 with and including triangular filleting in CM 1:4 on top edges complete all as specified and as directed. |
| 50 | M&L for non skid ceramic colored tiles 7 to 8mm thick (square / rectangular), area of each tile exceeding 0.06 Sqm but not exceeding 0.11 Sqm as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and as directed |
| 51 | M&L for 300x300x7-8 mm thk antiskid ceramic colored tiles 7 to 8mm thick (square / rectangular),as in floor etc. set and jointed in neat cement slurry & pointed in white or coloured cement to match laid over and including 15mm thick screed bed in CM 1:6, complete all as specified and directed. |
| 52 | M&L for granite (Telephonic jet black) work (table rubbed and pre-polished) 18-20 mm thick in steps, risers,jambs, pillars, window cill, cooking platform and flooring including bedding layer 15 mm thick in CM 1:6 on stone / brick masonry / concrete surfaces including pointing in white cement 1:2 using marble dust with admixture of pigment to match with shade of granite including demolition of old unserviceable stone tiles including screed bed etc. complete all as specified and directed. |
| 53 | Rounding edges of stone slab one edge, such as in steps, cooking platform and other similar situation complete all as specified and directed. |
| 54 | M&L for machine cut cuddapa stone slabs one side polished 20 to 25mm thick set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 20mm screed bed in cement mortar 1:6 including dismantling of old stone slabs & screed bed and rubbish off the premises complete all as specified and directed. |
| 55 | M&L for cutting of grooves on stone slabs such as in steps and other similar situations complete all as specified and directed |
| 56 | S&F GI tubing tubes \"medium grade\" galvanized including with all fittings & fixtures, fixed to walls and ceiling or laid in floors etc including taking up or down carefully old steel tubing and connections complete all as specified and directed for the following sizes of pipes:-(a) 15mm bore |
| 57 | (b) 20mm bore |
| 58 | S&F in repairs 20mm bore Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed |
| 59 | S&F in repairs 15mm bore Gun metal globe or gate valves with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified & directed |
| 60 | M&L for cutting chases, pinning in, concrete block / brick / stone walling & making good to facing where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc. and cutting chases for concealed water tubing and making good, cutting n. exc. 10 cm girth, complete all as specified and directed. |
| 61 | S&F in repair vitreous china wash hand basin table top coloured, 450 mm min bowl size oval shape fixed on granite platform with and including CP bottle trap 32/40 mm dia to out let pipe and including CP waste coupling making whole in granite for inlet and outlet pipe, complete all as specified and directed. |
| 62 | S & F in repairs 15 mm chromium plated 2 way bib cock fancy type with wall flangecomplete all as specified and directed. |
| 63 | S & F in repairs 15 mm bore tower type pillar taps 200 mm long neck fancy typecast copper alloy with capstan heads, chromium plated , screwed down high pressure with long screwed shanks and fly nuts, complete all as specified and directed. |
| 64 | S & F in repairs 15 mm angle valves / angular stop cock, fancy type cast copper alloy chromium plated with crutch or butterfly handle, screwed down and screwed both ends for iron pipe or for unioncomplete all as specified and directed. |
| 65 | S & F in repairs CP health faucet (ABS Body) with 1 mtr long flexible cord complete all as specified and directed. |
| 66 | S & F in repairs toilet paper holder with flat recessed type stainless steel complete all as specified and directed |
| 67 | S & Fin repairs chromium plated soap dish fixed to plugs with chromium plated brass screws complete all as specified and directed. |
| 68 | S & F towel Ringof CP fixed with and including Chromium plated brass screws and wooden / plastic cleats fixed in repairs complete all as specified and directed. |
| 69 | S & F in repairs 600mm X 450mm X 5.5mm thick bevelled edge mirror of selected quality glass mounted on wall with SS studs 25 mm round head and fastner complete all as specified and directed. |
| 70 | S& F in repair 5mm thick sheet glass corner shelf, 250mm radius including CP railing and CP brackets, complete all as specified and directed. |
| 71 | S&F 20mm bore ball valve high pressure of PTMT with epoxy coatedaluminium rod & high density plastic ball screwed for iron pipe and fixed (Minimum weight 210 gms), complete all as specified and directed. |
| 72 | S&F rotational moulded polyethylene water storage tanks of capacity 250 Litre (cylindrical vertical with closed top) hoisted and fixed in position including all necesarry GI fittings including dismantling of existing water tank complete all as specified and directed. |
| 73 | S&F 75 mm dia of outlet PVC (SWR) multi floor trap with grating including jointing with solvent cement complete all as specified and directed |
| 74 | S&F PVC (SWR) 110mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC set in solvent,complete all as specified and directed.Note for item nos. 72 & 73:- The quoted rates of this item shall be deemed to be inclusive of necessary scaffolding & security measures as the work has to be carried out for elevated height upto 12 mtr height building. |
| 75 | S&F PVC (SWR) 75mm bore pipes, single socketed in any length with rubber ring joints laid in trenches or fixed to wall including dismantling of old unserviceable breaking up drain pipes PVC set in solvent etc. complete all as specified and directed. |
| 76 | S&F 110mm bore PVC (SWR)bends / Tee with acess door, complete all as specified and directed. |
| 77 | S&F 75mm bore PVC (SWR)bends / Tee with acess door, complete all as specified and directed. |
| 78 | S&F in repairs vitreous china ceramic white single piece WC (S or P trap P with UF soft close seat cover, hinges, accessories set, size 365x655x765 mm, product Code : LYS-WHT-38851SSM of “Jaquar” or of equivalent make as mentioned here-in-after, complete all as specified and directed. |
| 79 | S & Fpressed steel frames of size 125mm X 60mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including M & L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame complete all as specified and directed |
| 80 | S & Fpressed steel frames of size 105mm X 60mm for doors with one or more rebates including necessary lugs, hinges, lock strikes plate, including M & L for providing PCC type B-0, 1:2:4 (using 12.5 mm graded stone aggregate) to fill up the hollow portion of the frame complete all as specified and directed |
| 81 | S&F in repairs mild steel chromium plated grating (round) 125 mm dia fixed over floor / nahani trap (with hole OR without hole), complete all as speicified and directed. |
| 82 | Taking down of chowkat with shutter n. exc. 1.50 sqm each without taking off shutters from the frame including making good the distrubed surface with PCC 1:2:4 type B-0 (Using 12.5mm size graded stone aggregate) complete all as specified and directed. |
| 83 | Taking down of chowkat with shutter exc. 1.50 sqm & n. exc. 4.0 sqm each without taking off shutters from the frame including making good the distrubed surface with PCC 1:2:4 type B-0 (Using 12.5mm size graded stone aggregate) complete all as specified and directed. |
| 84 | S&F 35 mm thick factory made 2nd class hardwood gauged and skelton shutters open rebated and prepared to receive glass / gauze etc ( without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitered beads for securing glass etc size of members of shutters shall be as specified in SSR Part-I Section 8 cluse 8.24(a) and fitted to chowkats complete all as specified and as directed. |
| 85 | S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides with lipping complete all as specified and as directed. |
| 86 | S&F factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of 30mm size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having min density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 ,laminated on both face wooden texture, modulus of elasticity 850 N/mm2and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, (rate inclusive of SS hinges 100 mm-03 nos for each shutter) complete all as directed by Engineer-In-Charge |
| 87 | S&F aluminium anodised sliding door bolts 300 mm size with hasp, staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and as directed. |
| 88 | S&F 150mm size extruded aluminium alloy tower bolt fabricated type anodised complete all as specified and as directed. |
| 89 | S&F 150mm size extruded aluminium alloy handles fabricated type anodised complete all as specified and as directed. |
| 90 | S&F 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed. |
| 91 | S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to steel or wooden windows / door /shutters / frames etc. complete all as specified and as directed. |
| 92 | S&F in repairs three track sliding window with two or more shutter with and including 4mm thick tinted glass and one shutter using stainless steel wire cloth of 0.36mm nominal dia & 1.18mm width aperture for mosquito proofing with good quality bearing handle, lock, rubber beading and glazing clips etc by using following aluminium powder coated sections conforming to catalogue of \"JINDAL\" or of equivalent make including taking down of old unserviceable window of any type complete all as specified and directed by Engr-in-Charge. (a) Bottom frame - 20620 (b) Top frame & vertical - 20621 (c) Handle (side) - 20606 (d) Shutter inter lock - 20724(e) Shutter top & Bottom - 20844 (f) Glazing clips - 19352. |
| 93 | S & F in repairs ventilators/louvers using 4mm thick x 10cm wide frosted glass strips and following aluminium powder coated sections conforming to catelogue of \"JINDAL\" or of equivalent make and rubber beading etc complete all as directed:-(a)SP : 20048(b)Glazing clips : 19352 |
| 94 | S&F steel work in tubular (Square/ Rectangular section) Purlin, Rafter, Posts etc including special shaped washer etc. complete using ERW or induction buttwelded tubes conforming to I. S.1161- 1979 grade St.-240, complete all as specified and directed |
| 95 | S&F rolled mild steel conforming to gradeE-250 (Fe-410W, quality A) as in Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance plates, pieces, cleats etcincluding necessary welding etc. complete all as specified and directed |
| 96 | M & L for providing and fixing Gypsum Board 12.5 mm thick in ceiling fixed with screw (as per manufacturer’s instructions) to Gl frame work for seamless ceiling comprising of Gl perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (n. exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long including two coats of oil bound distemper over a coat of primer on ceiling including dismantling of existing false ceiling with grid complete all as specified and directed. |
| 97 | M&L for decorative POP cornices/moulding of pattern as per approved by Engr-in-charge of cross section area exc. 13 Sqcm and not exc. 25 Sqcm includingtwo coats of oil bound distemper over a coat of primer on ceiling complete all as specified and directed. |
| 98 | M&L for preparation of new un-decorated surfaces of ceiling including cornice and applying two coats ofoil emulsion distemper over and including alkali resistant priming paint over and including 1 mm thick putty on ceiling complete all as specified and directed. |
| 99 | M&L for providing, cement concrete 1:2:4 type B1 by using 20mm size graded stone aggregate as in roof kerbs or mud stops, rounded or chamfered on edge, concreting on walls under roof sheets etc including form work if any required at site, complete all as specified and directed. |
| 100 | Dismantling timber scantling in any position (unframed wok) exc. 40sqcm in section complete all as specified and directed. |
| 101 | Dismantling of plain or corrugated AC sheeting in roof covering complete all as specified and directed. |
| 102 | S&F roof sheeting prepainted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 103 | S&F roof sheeting prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick, 150 GSM of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 104 | M&L for pre-cast cement concrete block masonry with solid blocks type C-1, 1:3:6 (By using 20mm size graded stone aggregate), exc. 10 cm in width and setting in cement mortar 1:6 complete all as specified and directed |
| 105 | M&L for two coats of Plastic Emulsion Paint over plaster of paris putty 1mm thick over a coat of alkali resistant primer including preparation of new plastered surfaces complete all as specified and directed |
| 106 | M&L for vitrified tiles, double charged, 10mm thick (square/ rectangular) polished, area of each tiles 600mmx1200mm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tile laid over and including screed bed 20 mm thick in cm 1:6 complete all as specified and directed |
| 107 | S&F of WPC wall panelling, 12mm thick wooden textured, 3d paint finish fixed to wall with screws including concealed aluminium frame work including cornices, leaping and dismantling old wall panelling of any type complete all as specified and as directed |
| 108 | M&L for vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles 600mmx1200mm set and jointed in neat cement slurry and pointed in white or colour cement to match over 10mm thick plaster in CM 1:3 with and including triangular filleting in CM 1:4 on top edges complete all as specified and as directed |
| 109 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube and fixing in openingincl taking down of chowkat with shutter without taking off shutters from the frame including making good the distrubed surface complete all as specified and directed. |
| 110 | S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S tubes for top & bottomrails .M.S frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20 mm width struckinside with solvent cement for stilesand plain colour PVC sheets for top rail ,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/scaled to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement and fixing in the frame as per manufacturers instructions complete all as directed by Engineer-in-Charge. |
| 111 | S&F 100mm size of butt hinges, medium weight cold rolled mild steel complete all as specified and as directed. |
| 112 | M&L for providing Jaipur pink rock face wall cladding 20 to 30 mm thick on vertical surface, set and jointed in neat cement slurry and pointed in white or colour cement to match laid over and including 15 mm thick backing coat in CM 1.4 including Gl hooks for hanging tiles complete all as specified and directed by Engr-in-charge |
| 113 | M&L for providing Jaipur pink CNC precast Jali, 0.91 m in height and 1.21 m in width, both side carving, 40 mm thick including all mouldings and fixing into stone pillar, color and design as approved by Engr-in-charge |
| 114 | M&L for providing precast Jaipur pink stone pillar height 1.21 m, cross section 100 mm x 100 mm, including fixing in concrete / masonry color, spacing and design and fixing complete all as directed by Engr-in-charge |
| 115 | M&L for cement concrete mix 1:1.5:3 using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams, plinth beams, for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and as directed |
| 116 | S&F mild steel TMT bars 10 mm dia deformed or twisted and over cut to length bent to shape required including cranking, bending spirally including mild steel wire not less than 0.9 mm dia or securing with clips, complete all as specified and directed. |
| 117 | S&F mild steel TMT bars 5mm dia and over up to 10mm dia as in stirrups, cut to length, bent to shape required, including cranking, binding spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia, complete all as specified and directed |
| 118 | M&L for form work to flat foundation, footings, bases of column, raft & raft beams, side & soffits of foundation and plinth beams and similar work, fair finished surface of concrete, complete all as specified and directed. |
| 119 | M&L for form work to side of pillars, post, struts & columns etc., finished the surfaces fair, complete all as specified and directed. |
| 120 | Taking down carefully unserviceable copper / aluminiumpoint wiring (light, fan, socket or power) etc and making good disturbed surfaces of walls, floors complete all as specified and as directed. |
| 121 | Taking down unserviceable main switches, DBs, bus bars chambers including all fittings and fixtures such as MCBs,isolator, etc complete all as specified and as directed. |
| 122 | M&L for point wiring surface type on stone wallswith PVC insulated, unsheathed, single core multistandard copper conductor cable( FRLS) of size 1.5 Sqmm, 1100 volts grade including 1.5 Sqmm PVC insulated, unsheathed, copper conductor cable for earth continuity wire to be drawn through in and including PVC casing and capping ISI markedwith all its acessories including necessary modular metal flush box/ pressed steelterminal boxes and modular white cover plate/ 3 mm thick ISI marked laminated sheet cover and SS screws with cup washers for fixing switches, sockets, fan regulators etc. including making good disturbed surfaces in cement mortar 1:3for one light /CB /fan point controlled by one switch, complete all as specified and as directed. |
| 123 | All as per item No 120 here-in-before but one 5 Amps 3/5 pin socket outlet on the same board with other switchcomplete all as specified and as directed |
| 124 | All as per item No 120 here-in-before but one 5 Amps 3/5 pin socket outlet on independent boardcomplete all as specified and as directed |
| 125 | All as per item No. 120 above but wiring with 2.5 sqmm copper cables with 2.5 Sqmm copper cable as continuous earth wire for one 5/15 Ampsswitch socket outleton independent board,complete all as specified and as directed |
| 126 | S&FModular switch 1 way 6A, 1 module complete all as specified and directed. |
| 127 | S&F Modular switch 1 way 16A, 1 module complete all as specified and directed. |
| 128 | S&F modular Socket, 6A - 2/3 pin combined 2 module, complete all as specified and directed. |
| 129 | S&F modular Socket 6A/16A - 2/3 pin combined 2 modulecomplete all as specified and directed. |
| 130 | S&F modular type fan regulator 120 Watts , 2 module ,complete all as specified and directed. |
| 131 | S&Fmodular type bell push switch , 1 module ,complete all as specified and directed. |
| 132 | S & Fmodular white cover plate with frame, 2 module complete all as specified and as directed. |
| 133 | All as per item No 130 abovebut 3 modulecomplete all as specified and as directed |
| 134 | All as per item No 130 abovebut 6 modulecomplete all as specified and as directed |
| 135 | S & F Buzzer, Ding Dong AC,230 volts, single pole, complete all as specified and as directed. |
| 136 | Supply and fix ceiling rose surface bakelite 65x50 mm two to three terminals,complete all as specified and as directed |
| 137 | S&F MCB single pole, 240 volts 6 to 32 Amps, \"C\" curvecomplete all as specified and as directed |
| 138 | S&F MCB single pole and neutral 06 to 32 Amps, 240 Volts, \"C\" curvecomplete all as specified and as directed |
| 139 | S&F sheet metal enclosure,(for DB\"s when MCBs to be used), flushed in wall single pole and neutral Double door, 8 way, 240 Volts withPVC MCB blanking plates, stove enamelled, dust and vermin proof suitable for incorporation of MCB\"s and isolators etc complete all as specified and as directed. |
| 140 | S&F in repairs LED batten suitble for indoor application 20 Watts, 4\" length , wall mounted with extruded aluminium housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable sizecomplete all as specified and as directed |
| 141 | S&F in repairs LED batten suitble for indoor application 10 W, 2\" length , wall mounted with polycarbonate housing, end cap made of ABS plastic of white colour finish and high efficiency translucence (HET) diffuser and integral electronic driver including two point surface mounting on wall/ ceiling and connecting up with twin core twisted flexible copper conductor cable of suitable sizecomplete all as specified and as directed |
| 142 | Supply andfixLED 35 Watt street light fitting IP-66 for bldg secutiry complete with light grade GI brackets, Nuts, bolts, clamps complete with all accessories internaly pre wired and including connecting up with twin core twisted flexible copper conductor cablecomplete all as specified and as directed |
| 143 | Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motorcomplete including connecting with 3 core flexible copper conductor including taking down the existing ceiling fan and depositing the same in MES store complete all as specified and as directed. |
| 144 | Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250mm complete including connecting with 3 core flexible copper conductor including taking down the existing exhaust fan and depositing the same in MES store complete all as specified and as directed. |
| 145 | Material & Labour forearthing complete withgalvanised steel earth plate electrode 60cmx60cmx6 mm thickness burried directly in ground (earth pit not less than 2.25mtr deep below normal ground level) with top edge of earth plate not less than 1.5 mtr below normal ground level connected to and incl galvanised earth lead wire of 4.00mm dia by means of nuts & bolts, check nuts and washers of galvanised incl PCC pit of 1:2:4 type B-1, cover reinforced with XPMweightnot less than 4 Kg/Sqm and 6mm dia bar handle, earth pit angle iron frame of size 25mm x 25mm,excavation and earth work in anytype of soil, charcoal dust, salt, light grade GI watering pipe 20mm dia with funnel and wire -mesh and medium grade GI protection pipe of 15mm bore from top edge of earth plate upto main distribution board complete allto as shown in electrical plate No 3 of MES Sch 2009 (Part I) connected main switch board and testing on completioncomplete all as specified and as directed |
| 146 | M & L For fixing earth continuity conductor or main earth lead fixed to wall or buried in ground or drawn in GI pipe with 4 sqmm GI Wire complete all as specified and directed. |
| 147 | Supply & Fix GI pipe light grade 50 mm for cable protection fixed to poles/bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting incl bolt, nut, washer etc. complete all as specified and as directed |
| 148 | Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10.0 sq mm 2 corecomplete all as specified and as directed |
| 149 | M&L for laying double wall corrugated HDPE pipe, UV stabilized of size 90X75 mm (ODX ID), IS-16205 for cable protection laid in trenches or fixed to wallscomplete all as specified and as directed. |
| 150 | S&F 35 mm thick factory made 2nd class hardwood plain framed panelled shutters of any number member of panels with panels of timber flat on both sides of wood particle board with commercial face veeners. The size of rail and stile as per IS : 1003 (Part I ) kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 151 | S & F in repairs vitreous China squatting pan, \"Orissa\" pattern, size 580x440mm white, with integral foot rests, \"P\" of \"S\" trap including connection to trap includingprovision of concrete and with and including 10 litres capacity, PVC flushing cistern,low level including PVC waste coupling & PVC flush pipe of 32 mm dia complete all as specified and directed |
